To acces vmware servers using windows command line

Hello,
I installed vmware server 1.0.3 on windows 7, for linux and oracle 10g. which i implemented successfully, My question, Is it possible to access the oracle database or vmware server through windows 7 command line?
If its possiable can any one help me out. what i am thinking is if i could install putty on windows 7 and access the vmware servers so i can have a kind of live environment on single system.
thanks and regards
firdous ahmad
[email protected]

Hi,
It is possible. However, please post your question in the appropriate forum.
Database - General
General Database Discussions
Thanks,
Hussein

Similar Messages

Can't change activation only mode to off using the command line in Windows 7 64 bit

I used the command line to turn activation only mode on and now when I use teh command to turn it off it will not change the iTunes setup. I am on Windows 7 64 bit. I tried uninstalling itunes and reinstalling and it is stillin activation only mode.

Hi! Thx for your quick reply! I am still unsure what to do tho---see my questions below in bold:
Windows 7 comes with its own version of the standard PostScript driver. = Where is this driver? I have no idea how to find it, it doesn't show up in my Printer menu in FM?
Given that PostScript generated by a driver can be highly device-specific, you need to install the driver as modified by the PPD file for the device in question. Most printer manufacturers in fact provide a PostScript driver installer that associates their printer's PPD file with the standard Windows Printer driver and subsequently creates what is called a PostScript printer driver instance for the particular device on the I/O port you designate. = ??? I've only updated a PPD file for watermarks and have no idea what this means...is there a step-by-step instruction for this? I just need to download a PS driver to select that works & doesn't freeze up my FM when creating a .ps file.
The real question thus is exactly what are you trying to generate PostScript for? = I create a PS, & then use Distiller to create a PDF. This enables me to have a PDF that automatically has Bookmarks, the TOC/LOF/LOT & all corss-refs are hyperlinked, etc.
If you are trying to create PostScript for distillation into PDF, Acrobat installs a PostScript driver instance of its own, labelled Adobe PDF, that is associated with the Acrobat Distiller PPD. = I have tried the Adobe PDF selection from my Printer menu in FM, but it freezes up FM and I have to close the whole program & no PDF generates.
BTW, although you may be successful in installing and running FrameMaker 8 on Windows 7, in fact Adobe officially does not support FrameMaker 8 on Windows 7. = I don't know what to say---the upgrade is too expensive for some of us folks out here right now, so we all need to work with what we have for now!
I appreciate your help, thank you.

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line

Installing a New Windows Server 2008 R2 Child Domain by Using the Command Line:
http://technet.microsoft.com/en-us/library/cc731873%28v=ws.10%29.aspx
dcpromo /unattend /InstallDns:yes /ParentDomainDNSName:mysite.com /replicaOrNewDomain:domain /newDomain:child /newDomainDnsName:gridview.mysite.com /childName:gridview /DomainNetbiosName:gridview
/databasePath:"c:\Windows\ntds" /logPath:"c:\Windows\ntds" /sysvolpath:"c:\Windows\SYSVOL" /safeModeAdminPassword:pass1 /forestLevel:4 /domainLevel:4 /rebootOnCompletion:yes
Error Code:
The specific argument 'childName' is not recognized.
I am trying to insert gridview as a childname.

Hi,
Before going further, can we try another domain name to see what will happen?
Besides, if the issue persists, we can try installing a new child domain by using the GUI.
Installing a New Child Domain by Using the Graphical User Interface (GUI)
http://technet.microsoft.com/en-us/library/cc771856(v=ws.10).aspx
Best regards,
Frank Shen

Can I use the Command Line Interface on Unix?

Hi,
We use 9iAS on Unix. We want to use Discoverer Command Line Interface on unix to export the worksheet query result. Can anyone know how to do this? I couldn't find out the command similar to dis5usr.exe for windows version.
Thanks.
Richard Qiu

Hello Richard
You can use the Discoverer EUL Command Line for Java utility. This was released with Discoverer 10g (9.0.4).
Please refer to the documentation for more information on how to use this command line interface: 'Oracle Discoverer EUL Command Line for Java User's Guide 10g (9.0.4), Part No. B10274_01 (PDF)' The document is available from OTN at http://otn.oracle.com/documentation/discoverer.html
Regards
Discoverer Product Management

Windows command line

Is thee any way to use java to process Windows command line commands, such as running ftp?

Runtime.exec() is used to run system commands, but it's not a command-line shell. Before you try to use it, you should read the following: Navigate yourself around pitfalls related to the Runtime.exec() method
If you're looking for an FTP API in Java, you should try the Jakarta Commons Net packages...

How to Invoke tasks created in FrameMaker Publishing Server from the Windows command line

Hi All ,
i would like to know how can we Invoke tasks and schedules created in FrameMaker Publishing Server from the Windows command line.
we used publishing server mainly to convert Frame maker files into PDF and that should be do progarmatically without manual intervention on Demand.
so could you please let us know how can i invoke rthe task creted to convert FM file to PDF in FrameMaker Publishing Server from the Windows command line.
please let me know the command to execute .
thank you and waiting for valuable response.
best regards
Ramesh babu

Please see http://blogs.adobe.com/techcomm/2011/03/adobe-framemaker-server-10-and-its-command-line-ca pability.html for the same.
Harish Dhawan

Running class files from the windows command line...

Hello Everyone,
My instructor showed us a way to run class files from the windows command line. However every time I try to run the class file from the command line using a command like: java CruiseHelper.class
I get an error that states "Exception in thread "main" java.lang.NoClassDefFoundError: CruiseHelper/class"

Hello Everyone,
My instructor showed us a way to run class files from
the windows command line. However every time I try
to run the class file from the command line using a
command like: java CruiseHelper.class
I get an error that states "Exception in thread
"main" java.lang.NoClassDefFoundError:
CruiseHelper/class"Classes are not file names. You don't have a class named "CruiseHelper.class", that's a file name. The class name is just CruiseHelper (if you have no package statement in it).
So,
java -classpath . CruiseHelper

Scheduling workbooks using the command line

Hi, can anyone tell me if it's possible to schedule workbooks in Discoverer using the command line interface? If so, could you point me in the direction of any relevant documentation?
We've got 300+ reports to schedule on a regular basis and it would be useful if we had different options to schedule the workbooks e.g. for batch processing.
Thanks and regards
Geoff Butler

Inspired by your MacOS fix, I went looking to see if their was an easier Windows fix than my 'Repair Bonjour' process. Turns out there might be.
In the Bonjour 'Program Files' folder, there is an application named 'mDNSResponder.exe' which brings up a DOS dialog. After running this application and then opening iTunes, I had a stable AppleTV-iTunes connection through the evening until I put my computer to sleep.
I haven't done any thorough testing around this (the kind that Apple should have done before releasing iTunes 7.6), but it does seem to at least temporarily resolve the issue until iTunes is closed again. What would be nice is if this works without having to restart a faulty iTunes session (which the 'Repair' fix doesn't).

How to access the mysql using ordinary command line in Azure Website?

Hi
I deploying Django project on Azure. I created project and MySQL db according this method: https://pytools.codeplex.com/wikipage?title=PollsDjangoSql . I can create tables using django command "syncdb" in Visual Studio. I see
db structure in SQL Explorer. All works. But now I need to get access directly to mysql. For example with a view to set encoding of some column, or set permissions, change user password, etc.
I found about many different tools and methods in Microsoft portal. But the purpose of these tools, how to install it and how to use it is a very entangled (After several attempts to find out what's what two weeks later I found on my computer
three dozen programs with unknown purpose. I doubt that I need to install so many tools to just add the user in mysql).
How to access the mysql using ordinary command line (or the same simple tool) in my case?

Hi pvgdrk,
To get access directly to a mysql database, you can use the commandline tool(open a cmd window-->type mysql the commadline ) or the
GUI MySQL workbench.
Since this is a question about MySQL, I would suggest you post your question in a dedicated MySQL forum. You will get more prompt response.
If you have any feedback on our support, please click
here.
Eric Zhang
TechNet Community Support

Launched from a windows command line

If my labview app is run remotely from a windows command line, is there any way to tell programmatically from a variable somewhere that it was launched by another app and not by the operator manually launching the app itself ?

Hello id,
If you have control over the application that's invoking your exe through the command line, I'd suggest using a simple custom argument that is passed to the application per this KnowledgeBase:
KnowledgeBase 1CNFGHFI: Passing Command Line Arguments to a LabVIEW Executable
http://digital.ni.com/public.nsf/allkb/17C3AD70493CE0208625666A00763364
You would then use the App.Args property (Application:Command Line Arguments Property) to check for your "this launched from the command line via this other application" argument, whatever it might be. I would suggest that you should only need to check for *any* arguments, if they're present then you know it's been launched via the command line. The argument could just be the name of the calling application. If you're unable to insert arguments via the invoking application, you could also use a one-line batch file that's installed with the target EXE to do the same thing (you'd run the batch file instead of the executable from the invoking application).
Determining where an application was invoked from without sending it that information explicitly is another, trickier problem- there are plenty of discussions on stackexchange and elsewhere detailing possible solutions, but if the invoked application (your EXE) isn't owned by the command prompt process I'm not sure it's possible. There are a few mentions of checking environment variables that the command prompt usually sets to see if they've been configured, but I have no experience with this.
Best Regards,
Tom L.

Run Scripts from windows command line

Hi, We're creating a test enviroment and we need to "rebuild" our Database (Tablespace) from scratch everytime we run a test.
What we need is to run all scripts files from windows command line, there is any command or application we can use here?
thanks.
Fernando.

Create a scripts.bat file with something like this in it:
@sqlplus -S username/password@connect @scriptname.sql

Problem using sql command line

Hello!
I do have some problems with using the command line for INSERT statements. When I perform insert statements the data of these statements are lost as soon as I close the command line. Other statements like SELECT or CREATE TABLE work properly.
any idea?
regards
D.

I do have some problems with using the command line
for INSERT statements. When I perform insert
statements the data of these statements are lost as
soon as I close the command line. Other statements
like SELECT or CREATE TABLE work properly.
Have you run "COMMIT", after insert statement ??
You need to run "commit" (preferable) or exit (Oracle explicit commit on exit).
You might have close the sqlplus window without running above command.
See following thread for explanation with example
Re: commit problem!!
Virag

How to check system status from Windows command line?

Does anyone has an idea how to check system status from Windows command line? In UNIX we use startsap check, unfortunately I didn't find an appropriate command provided by SAP.
The only idea we have is to use
tasklist /FI "Username eq SAPService<SID>" | find "disp+work"
which isn't as nice as startsap check.

Hi,
In windows you can use the command
go to profile directory in command prompt and the give the following command to check the status of the instance.
sapstart check pf=START_DVEBMGS<nr>_<hostname>
that means you need to mention start profile or instance profile. So that it will say whether the instance is running or not.
If you want any other information please reply back to me.
Thanks,
Chaitanya.

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

How can i install snow leopard on my mac G5 using a command line and booting from an external usb rom, since my disk i have is not a bootable media

Hi.
You simply can't. Snow Leopard is compiled in Intel binary only.
Good Luck.

Issue while creating BPEL artifacts using BPEL command line tool

All
I am trying to create BPEL artificats for SQL server stored procedure for SQO Server 2005 using BPEL Command line tool.
My demo.properties is
ProductName=Microsoft SQL Server
DriverClassName=com.microsoft.sqlserver.jdbc.SQLServerDriver
ConnectionString=jdbc:sqlserver://10.10.20.2:1433;databaseName=dAP
Username:apcdb
Password:password1
SchemaName:dev
ProcedureName:spiSOATesting
ServiceName:SQLServerSPService
DatabaseConnection:MSSQLServer
Destination:c:/temp/sqlprocedure
and I have create a batch file called as generate.bat and it contains following information
java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\jlib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts %1
and when I try to run the command at BPEL PM Developer Prompt, I am getting Procedure not found, Can one please tell, what is the cause of this error. and how does this command line tool exactly work.
Following is the output from command prompt.
D:\product\10.1.3.1\OracleAS_1\bpel\samples>D:\temp\sqlprocedure\generate.bat D:\temp\sqlprocedure\demo.properties
D:\product\10.1.3.1\OracleAS_1\bpel\samples>java -cp D:\jdevstudio10134\integration\lib\DBAdapter.jar;D:\jdevstudio10134\integration\lib\bpm-infra.jar
;D:\jdevstudio10134\integration\lib\orabpel.jar;D:\jdevstudio10134\lib\xmlparserv2.jar;D:\jdevstudio10134\lib\xschema.jar;D:\jdevstudio10134\toplink\j
lib\toplink.jar;D:\jdevstudio10134\integration\lib\connector15.jar;D:\temp\sqlprocedure\JDBC\sqljdbc.jar oracle.tip.adapter.db.sp.artifacts.GenerateArtifacts D:\temp\sqlprocedure\demo.properties
Procedure not found: dAP.spiSOATesting
Thank you

HI
Pricing will be carried basing on the pricing
procedure.
Case1: Prices will be carried out automatically if
necessary condition records are maintained for the
condition type.
For this you can go to Sales Order-> Item Conditions
In the screen you can click on command button Analysis,
which gives you the list of condition types associated
to the pricing procedure. By clicking on the condition
type you can know the action that has taken place.
Case2: Manually forcing prices for Items.
To do this, you have to populate ORDER_CONDITIONS_IN &
ORDER_CONDITIONS_INX. Also note to identify the item
numbers, you manually pass the item number for each item
in the sales order, use the same item number for
populating conditions.
Parameters required:
ORDER_CONDITIONS_IN:
ITM_NUMBER, COND_TYPE, COND_VALUE, CURRENCY
ORDER_CONDITIONS_INX:
ITM_NUMBER, COND_TYPE, UPDATEFLAG, COND_VALUE,CURRENCY.
Hope the above info helps you. Do revert back if you
need more info.
Kind Regards
Eswar

To acces vmware servers using windows command line

Similar Messages

Maybe you are looking for