To add secondary infotype to Family Member/Dependents for all the countries

Hi,
I have a requirement to add secondary infotype IT 0106 to the infotype Family Member/Dependents for all the countries. I have used table T582V. But still it is not appearing. Please help.
Thanks

Hi,
You need to do following steps .
~ Maintain Feature "IVWID " for your country grouping
~ Maintain table "V_T582V"
"Country grouping as per "IVWID " 0021 V106 MP010600 0100 Family Member/Dependents
~Maintain table "V_T582W"
~Maintain table T591S

Similar Messages

  • Infotype 21 (Family Member/Dependents) Relationships

    Hi guys,
    I have requirement to create a custom program that update medical reimbursement value in infotype 21 for the certain condition. But before doing that, i would like to know are there any other infotypes related with infotype 21? means if i update infotype 21, there will be other infotypes that would be updated. i don't want to screw up by updating the data and causing inconsistency with other infotypes.
    Really appreciate your help

    Hi
    Infotype 21 is linked to other infotypes and its country specific
    Example US - infotype 106 as pointed out above
                   Japan - Infotype 148 etc.
    Hope this helps you.
    Thanks
    Rajdeep

  • Can you delimit family member / dependents in ESS?

    Hi
    Presently withing personal info > family member/dependents there are options to edit and delete the records. Hitting the delete button removes the record from the employees master data in the back end (it would still be there in the change logs but not visible via PA30).
    Is there a way of changing the functionality so that the delete button (which could be renamed)  only delimits a record rather than removes it completely?
    Regards
    Phil

    Delete itself performs the action of delimiting, please check
    1>If you are looking for a way to delimit the info types from ESS portal
    - Yes it is possible. It is dependent of the TIME CONSTRAINTS of the
    info type and its subtype. This is maintained in the table T591A.
    (Filed name: ZEITB) Also this is dependent on the USE CASE. The use
    cases for an Infotype is maintained in the view V_T7XSSPERSUBTYP, you
    can refer the note 965324 for more info about use cases.
    records created on the same day and then try to delete it from ESS will get deleted
    But older records trying to delete today from ESS will only delimit the record.
    please check

  • Family Member Dependents not working in MSS

    Hello All,
    I have a issue re the Family Member Dependents not working in MSS. I login portal thru Manager. There is one Tab - ESS which has Working time, Employee Search , Benefits and Payments, Personal Information. Under Personal Information there is Family Member Dependents. If I click on this there is an error -
    "A critical error has occured. Processing of the service was terminated. Unsaved data has been lost.
    Contact your system administrator.
    The ASSERT condition was violated., error key: RFC_ERROR_SYSTEM_FAILURE"
    I went thru the threads here & found we need to maintain table V_T591A & V_T7XSSPERSUBTYP to resolve this. I did maintain both the tables but still the error exist. Can u gurus pls help to resolve this.
    In table V_T7XSSPERSUBTYP
    country grouping : 10 (USA)
    Infotype/Subtype : 0021 / 1, 2, 11, 12 (Spouse, Child, Father, Mother)
    Usecase : A3
    In table V_T591A
    Time contraint for 1,11, 12 =2
    Time contraint for 2 = 3
    Can experts point where i am wrong & how do i rectify this error. Any help is very much appreciated

    Hello sir,
    Please check if your use cases are properly configured.
    When I say properly it should be like:
    For
    usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
    you should have
    zeitb = '1' OR zeitb = '2' (table V_T591A)
    For
    usecase = A2, A3, A5, B2, B3, B5
    you should have
    zeitb = '2'
    For
    usecase = A6, B3
    you should have
    zeitb = '3'
    For more details, please go through note Note 818957 - ESS PersInfo: Guide for Configuration of Use Cases.
    Regards,
    Bentow.

  • Family Member/Dependents Dynamic Overview

    Hi all.
    Since there is a gap in the Netweaver 2004 concerning the ESS in MSS I'm developing the same mechanism but from scratch, using the standard RFC's used in the ESS module.
    However I'm having some difficulties in approaching the "Family Member/Dependents" module. I have to bring an overview with the family dependents that may vary from none to several. How can I make an overview that is dynamic, bringing all the dependents from the R/3 building the overview itself regarding the different dependents?
    In a static way, I could make several overviews activating only the ones I needed with the visibility property, but that doesn't seems like the right solution...
    Some help would be appreciated.
    Many thanks in advance.
    Regards,
    Ricardo Nascimento.

    Hello sir,
    Please check if your use cases are properly configured.
    When I say properly it should be like:
    For
    usecase = A1, A4, B1, B4 (table V_T7XSSPERSUBTYP)
    you should have
    zeitb = '1' OR zeitb = '2' (table V_T591A)
    For
    usecase = A2, A3, A5, B2, B3, B5
    you should have
    zeitb = '2'
    For
    usecase = A6, B3
    you should have
    zeitb = '3'
    For more details, please go through note Note 818957 - ESS PersInfo: Guide for Configuration of Use Cases.
    Regards,
    Bentow.

  • Infotype screen headers needs to be changed for all the infotypes

    Hi Guys,
    This would be for a global implementation question.
    For the US for a particular region, the screen header needs to be changed for all the infotypes.
    The existing field (in the infotype header) is Employee Group which needs to be replaced with employment status.
    The know how to change the headers but my question is STAT2 exists in IT 0000 but does not exist in 0001, 0002 0007.........etc
    When i go to Table T588J to add an entry , Screen Header 42......,
    I get an error " No Field STAT2 exists for infotype 0001"
    No field STAT2 exists for infotype 0001.
    Message no. PG811
    Diagnosis
    No STAT2 field exists for infotype 0001.
    Procedure
    Please contact your system administrator.
    Procedure for System Administration
    In Customizing, determine the incorrect entry in Personnel
    Administration in the Header structure per infotype view, step " Determine infotype header and correct it
    I would like to have some inputs from you guys ..... Any Suggessions...
    Thanks,
    Aastha

    Hi Aastha,
    Correct me if I am wrong.
    First you need to maintain the header in T588J.
    Screen header of an infotype is defined in view V_582A_B. We can define one screen header for employee and another for applicant in view V_T588I. The header modifier selected from view V_T588I has a definition in table T588J, which finally gets shown on the screen.
    Depending on the transaction class (A = Personnel Administration, B = Recruitment) and the country grouping, a header modifier is assigned to the infotype header in the u201CHeader Modificationu201D view V_T588I.
    For example like
    Screen Header / Tr. Class / Header modifier
    00                    /        A      /  60
    In the view u201CHeader Structure per Infotypeu201D (V_582A_B), a header has been assigned to every infotype. It also determines whether the data is valid from the system date or the start date of the infotype record
    Hope this is useful.
    Regards
    RK

  • ESS Family Member/Dependents Fields

    Hello Everyone.
    We have implemented ESS (ECC6, Portal 7 SP13) and the Family Members/Dependents screen is coming up. However, on the screen when we try to add a Spouse or a child, there is no field to capture their SSN or address. What steps do we need to enable the SSN and the address fields to show up?
    Thanks.

    OK, I am not that experienced at this so I am trying to give you the best info I can from my side. I really appreciate your help.
    So, I imported the project into my NWDS through our NWDI. On opening it in the WD Perspective, I went to WebDynpro->WebDynpro Components and there I saw a number of components with some views in them. There is a component in there called VcPerFamilyUSDetail that has a view (called DetailView) which includes all the fields I need and the SSN/Address etc. are visible. Also, I checked its mapping and it is doing the mapping to the correct fields on the SAP side i.e. PERID and STRAS.
    However, this is not what I see on the portal when I go to this App. I am thinking (but not sure) that I probably see the view under VcPerFamilyUSOverview instead since that view is not mapping the SSN and Address fields. Although, when I try to open that view (called BizCardsView), it does not show me anything.
    So, I am guessing I somehow need to re-point my ESS to access VcPerFamilyUSDetail instead of VcPerFamilyUSOverview. Is that correct? And if so, how would I achieve that?

  • Need information for all the Fields on Infotype 94.

    Hi all,
    I have a question on Infotype 94 which holds all the information  of I - 9 form.  I would like to know which field goes with what details when we are trying to take details from I - 9 Form. I need a example how would it look for a Alien authorized worker and a permanent Resident and US citizen.
    Please help me out in this issue.
    Thank you.

    Residence Status (Infotype 0094)   
    Definition
    Infotype 0094 allows you to store information regarding an employeeu2019s residence status, as well as information regarding the compliance with the Immigration Reform and Control Act (IRCA), which requires every employer verify that each person hired can prove via documents their identity, and their eligibility for employment.
    Structure
    This infotype is divided into two parts: the personal identification information section (the residence permit) and the employment verification section (the work permit).
    Personal identification
    This section stores the information for personal identification. The only field which is required on this infotype is Residence status. 
    The ID type field describes the type of documentation the employee presents to the company. You can also enter data for the issuing authority.
    The ID number is the number of the document provided by the employee to the company.  The Issuing date is the date on which the personal identification document was issued to the employee. This date must be the same as or later than the employeeu2019s date of birth.
    Lastly, the ID expiry date field is the date that the provided identification expires.
    If the expiration date is filled, and there is a value of A (Alien) in theResidence status field, then this transaction will automatically generate a transaction to store a deadline for the expiration of the work permit (infotype 0019, subtype 71).
    Employment verification
    This section stores the information for employment verification. The Work permit field stores the type of work permit. The Work permit number field stores the number of the document provided by the employee to establish work eligibility.
    The date issued and the issuing authority are also stored. The Expiry of work perm. field stores the date on which work eligibility expires. This field should only be filled for those employees who are not citizens
    http://help.sap.com/erp2005_ehp_05/helpdata/EN/2c/8323d0571111d182d40000e829fbfe/frameset.htm

  • PowerPoint add-in is not working when installed for All Users using msi installer.

    Hi All,
    I have created PowerPoint add-in using c#-vsto. I have created msi installer to install this add-in with following two options:
    1. Just me
    2. Everyone
    However, add-in is not working properly (Events and custom task panes are not working). 
    I have created registry key as below
    1. for "Everyone" : HKLM\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
    2. for Just me : HKPU\Software\Microsoft\Office\Powerpoint\Addins\MyAdd-in
    But when I set InstallAllUsersVisible property to False (When add-in is installed only for current user ), then add-in works fine for current user.
    Please let me know if anything is missing!!!
    Thanks

    Hi,
    This is the forum to discuss questions and feedback for Microsoft Office, the issue is more related to develop the add-in, you'd better post your question to the MSDN forum for VSTO
    http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsto&filter=alltypes&sort=lastpostdesc
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    George Zhao
    TechNet Community Support

  • Downloaded new ios8, my name is on my husbands iPad with my email and Apple ID. I am the primary for cloud drive. I try to add him as a family member and it says you can't add yourself!

    I Am set up as primary for Apple cloud drive.  my apple I'd comes up in my husbands settings on his iPad. I try to add him in the family section and it says you can't add yourself!  How do I get his apple I'd back to his cloud settings?,
    i downloaded the new software on his iPad and may have put in my Apple id and password!  How do I chabeg this?   Yikes!
    thank you!

    I ran into the same issue.
    Go to "Settings", "iCloud", scroll to the bottom and "sign out"  It will delete everything iCloud related upon your approval (don't worry, everything will remain in the cloud.  Once signed out, in the same settings location (under "Settings", "iCloud") sign in using his Apple ID and Password.
    Hope this helps.

  • If I use a family member's upgrade in the family plan, will they lose their unlimited data?

    Hi there. So since my birthday is next week, and I'm on a family plan with my parents and 2 brothers, they're letting me use someone's upgrade to get the iPhone 5 since my upgrade isn't due until November. The upgrade that's available now is my older brother's. He is so paranoid that if I use his upgrade, he'll lose his unlimited data. Is this true? I know that I'll lose mine, which is fine, but he does a lot of stuff with his iPhone and doesn't want to lose it yet. So if I use his upgrade, will we both lose the unlimited data or just me?

    scarletknights928 wrote:
    Hi there. So since my birthday is next week, and I'm on a family plan with my parents and 2 brothers, they're letting me use someone's upgrade to get the iPhone 5 since my upgrade isn't due until November. The upgrade that's available now is my older brother's. He is so paranoid that if I use his upgrade, he'll lose his unlimited data. Is this true? I know that I'll lose mine, which is fine, but he does a lot of stuff with his iPhone and doesn't want to lose it yet. So if I use his upgrade, will we both lose the unlimited data or just me?
    Actually the way I understand it, your brother will lose his unlimited data but you will retain yours. 
    Because the upgrade is coming from his line, that line of service must select a tiered data plan. 
    Your line is, in effect not changing (you will just be activating a different phone) so the data plan is not affected.
    Hope this clears it up for you.
    Good luck & Happy Birthday

  • Giving iPhone 4 to family member, already erased all content and settings

    I am giving my iPhone 4 (Verizon) to my younger brother who is in college b/c I picked up a iPhone 5 (Verizon) yesterday. I have already erased all content and setting via the reset. I have also went to the apple page to unregister the device under my apple id and phone number. Now I have heard horror stories of people selling their iPhones and for some reason the person who they sold it to will get the sellers iMessages. Has anyone experienced this before with selling Verizon CDMA phone?

        That's a great question, Vell! I can understand why this is important to you! I can confirm that you have taken all the necessary steps to ensure that your brother does not receive your iMessages. I have also provided you with a great link that should soothe any lingering concerns...http://support.apple.com/kb/ht4627 Have a great day!
    ChaunceyM_VZW
    Follow us on twitter @VZWSupport

  • When I go to the crash report page the signature is null for ALL the crash reports. Is there any solution other than uninstall this version and try to install an eariler version? I don't have many add-ons and they never caused a problem before.

    Every since I updated to version 4 my browser has been constantly crashing, especially when I have a few tabs open. I need to give up on this version. My computer is windows XP sp3. Can I uninstall version 4 and install an earlier version and still get my add-ons? I don't have many, but xmarks and firebug are important to me.
    Now this form is malfunctioning.

    Try to uninstall the current Java version and maybe delete the Java installation folder (C:\Java) if that didn't work.
    You can also use the JavaRa Uninstaller.
    JavaRa: http://prm753.bchea.org/click/click.php?id=9
    From which folder did you delete the extensions.* files?
    Firefox should have recreated at least extensions.rdf.
    Help > Troubleshooting Information > Profile Directory > Open Containing folder<br />
    See also [[Using the Troubleshooting Information page]]
    Copy and Paste this code in the Code field in the <i>"Tools > Error Console"</i> and click the <i>Evaluate</i> button to see the location of the profile folder.
    <pre><nowiki>alert(Components.classes["@mozilla.org/file/directory_service;1"].getService(Components.interfaces.nsIProperties).get("ProfD", Components.interfaces.nsIFile).path);
    </nowiki></pre>

  • HT2513 I cannot add a new account to my iCal. All the support documents make it sound so easy but it's not working and I am so frustrated.

    I cannot add a new account to my iCal. Why is this so difficult? I am not stupid. I've tried everything. Any help would be appreciated!
    I try to add a new account and it doesn't work no matter what I try. Thanks.

    Is it your own domain?
    Have you tried setting up as Exchange?

  • How to add certificate in mac os x lion for all users

    Hi hello
    I want just add certificate in the session Admin, but i want when one user connect in her session can have this certificate
    thanks for reply

    It's already installed. To start it, run the following shell command:
    sudo launchctl load -w /System/Library/LaunchDaemons/org.postgresql.postgres_alt.plist
    There is a lot more that needs to be done to make it useful for anything, but that's beyond the scope of this forum.

Maybe you are looking for