To adjus the size of the box in the RMMAINgrapdhical view.

Hi,
Can anybody know how to adjust the size of the box in the RMMAIN graphical view. I need to adjust the size of the boxes for evert actity so that all the phases can be seen at a shot.
Regards,
Srilu.

Hello,
Let supose that:
create table size_test (
a number,
b varchar2(20)
)If you need the amount of data (in bytes) stored in the table:
>
select sum(vsize(a) + vsize(b)) data_size
from size_test;If you need to know how many bytes are actually stored on disk, you can make use of user_segments
>
select bytes
from user_segments
where segment_name = 'SIZE_TEST';Regards,

Similar Messages

How to change the size of a box in the runtime

I created a box in my scene, and want to change it's size in the runtime.
Is there any method to do so?
ps: I used "Box(float xdim, float ydim, float zdim, int primflags, Appearance ap)" to create the box .
thank you guys!

Dropping and re-creating the table is by far the best way (of course you need to unload the table's data to a flat file with ttBulkCp first and then reload it again afterwards).
a second option is to drop the column and re-add it with the new size but you still need to preserve the data first and put it back afterwards and this is harder for a single column than for a whole table. Also, if you are using replication you should exercise care when using ALTER TABLE to ensure iall replicated copies of the table maintain the same physical structure.
Chris

How to increase the size of text boxes in FCPX without stretching the text inside?

How to increase the size of text boxes in FCPX without stretching the text inside?

There are two basic Title formats — I should say Layouts — available: Text (plain) and Paragraph. (The plain text version usually does not appear with the blue dot controls — those generally appear for the paragraph type control.)
If the Title is using a Paragraph layout, it's like having a mini version of Text Edit available inside FCPX. You can tell when you click on the text (when the title is selected) -- a rectangle will appear around the text like so:
double clicking on the text will give you the bounds controls which you can use to redefine the text area without distorting the text. Once selected, notice the button that appears in the top right corner of the canvas:
Pressing that will activate the ruler. You can right click on the ruler and add Tab Stops (left, right, center and decimal.)
So if the title uses paragraph formatting, you can create a very WYSIWYG type of display text (use the Text inspector to alter text selections within the paragraph bounds.)

Equalising the size of List boxes

Hi all
I have 6 list boxes in a jsp page
The sizes of these boxes will change depending upon the content
If length of one item in the list box happens to big then the width of the list boxes
will increase.
I want to maintain the consitent size of all the list boxes.
Pls let me know
I am using the strus frame work
and i am using the tab <html:select>
Regards
Raj

You can do something with DHML but this does not work in netscape. Depends on what you are looking for.

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I d

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

I recently upgraded to Yosemite. Yesterday when I opened up the iPhoto (which I have it in my external drive due to the size of file) I get the message that it is not compatible with the new system(or something like that) and ask me to upgrade so I did. Then another message pops ups and asked for rebuilding the Thumbnails. So I clicked rebuild. Next it asked me to do one of three things(I can't remember all of them) so I chose the last one which is to download a photo to iPhoto. Now I only have that photo I downloaded in iPhoto file but not the rest of my pictures. The iPhoto library which is stored in my EHD shows it has 349GB but it only show one thumbnail of the last picture I downloaded after the rebuild process. What can I do to recover the rest of the file?
Thanks for your help.
George Kyaw
<Email Edited by Host>

How can I control the size of a cell in the GridBagLayout?

Hi,Swing Gurus
I am developing a swing-based program using JBulider5 enterprise.
It seems to me that the GridBagLayout is really a hard nut!
How can I control the size of a cell in the GridBagLayout?
It seems that I cann't control the size of a cell directly.
But how the size of a particular cell is determined when I switch the layout manager from XYLayout to GridBagLayout?
Thx in advance!
Regards,
Justine

hi,i have not done what you are asking but there are fields like
COLUMNWIDTH, MINSIZE, MAXGRIDSIZE, PREFEREDSIZE to which you can set the appropriate values and test for your need.hope this helped.bye martian.

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

I am trying to stream via ESPNWatch but I get a message saying I have a popup blocker that does not allow the streaming to happen. I unchecked the pop up blocker box in the Safari preferences to no avail. Any ideas?

Might be a Safari extension...
From your Safari menu bar click Safari > Preferences then select the Extensions tab.
If there are any extensions installed, turn that OFF, then quit and relaunch Safari to test.

How to set the size of JTextPane according to the size of text??

hello
how can i set the size of JTextPane according to the size of text it would contain in such a way that JTextPane should not have ScrollBar.

StanislavL wrote:
width should be defined for your container width. suppose you have a very long row of text. Widht full screen widht it wraps into 2 lines but if you set widht of your window to half screen widht there should be 4 lines.
But you can use the same code and get preferred widht as well.u mean like this :
objTextPane.getParent().getWidth();Edited by: 811243 on Sep 6, 2011 5:32 AM

When i load the page on line the link appear as well as the question marks in boxes on the background

When i load my Iweb photo page on line the writen links appear as well as the question marks in boxes, on the background? what can I do for that not to appear?
Blank
Dance classes
Albums photo
Party night
Wedding
Fashion
Links
Contact
Dance
/___sbsstatic___/migration-images/migration-img-not-avail.png#0
shapeimage_4
/___sbsstatic___/migration-images/migration-img-not-avail.png#1
SS100446_2d0e4370
/___sbsstatic___/migration-images/migration-img-not-avail.png#2
SS100462_2d0b1760
/___sbsstatic___/migration-images/migration-img-not-avail.png#3
ParisRockDanceAction_23f80fe0
/___sbsstatic___/migration-images/migration-img-not-avail.png#4
ParisRockDance Action_239c6820
/___sbsstatic___/migration-images/migration-img-not-avail.png#5
DanceActionJuly_25ff0d70
Back to Index
1 2 3 4
Play Slideshow
Back to Album
Download
Play Slideshow
/___sbsstatic___/migration-images/migration-img-not-avail.png
Previous
Next
1 2 3 4

Where are you hosting your site and how are you uploading the files to it?
Publish your site to a folder on your hard drive and open it locally with your browser to see if these pages display properly or not. If the look OK then the problem lies with the uploading of the files to the server.
If the local site looks the same as the online site then the problem is more serious.
OT

Firefox 3.6.6, avast 4.8.0 shows trojan in the firefox exe upx. When I go to move it to the vault a dialog box says the file an not be found

I am running firefox 3.6.6, Avast 4.8.0 shows a trojan in the firefox exe upx. When I go to move it to the vault a dialog box says the file an not be found. I uninstalled firefox and got rid of all firefox traces using Revo. but I still get the trojan warning.
== This happened ==
A few times a week
== I upgraded my firefox ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.4 (KHTML, like Gecko) Chrome/5.0.375.99 Safari/533.4

Firefox works fine on Windows 2000 SP4 for me.
Any chance you have a dial-up connection that uses a web accelerator to speed the loading of content?

Default check on the 'Posting block' check box in the Physical Inventory

I am looking for a default check on the 'Posting block' check box in the Physical Inventory document for T-code MI01 or MI31. Can anyone help in this?

Thanks for your reply. Can you send me the detail process how to do it through Transaction Variant.
Regards,
Tt

How to adjust the size of image to suit the size of panel?

i have got a panel which contains a image.but i don't want to use scroll panel if the image's size is bigger than the panel.
what can i do to change the size of image to suit the size of the panel every time i want to display it?
thanks

Reply 3 of this thread should be able to help you:
http://forum.java.sun.com/thread.jsp?forum=31&thread=286424

The firefox drop down box on the left top corner is missing

I do not have the firefox drop down box on the left top corner.

View > Toolbars = un-check the '''Menu Bar'''

Since upgrading to Firefox 4 I've been unable to select search items from the google drop down box in the toolbar. Instead, I have to retype my search item completely as I also unable to select 'auto-complete' items as they appear.

Since upgrading to Firefox 4 I've been unable to select search items from the google drop down box in the toolbar. Instead, I have to retype my search item completely as I also unable to select 'auto-complete' items as they appear.

Known problem with the Google Toolbar extension. <br />
http://www.google.com/support/toolbar/bin/static.py?page=known_issues.cs

Change the size of a box.

Anyone know how I can change the size of a text input box in
Dreamweaver CS3?

CSS -
input { width:2140px; height:1402px; }
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"satrop" <[email protected]> wrote in message
news:fafrup$5he$[email protected]..
> Anyone know how I can change the size of a text input
box in Dreamweaver
> CS3?

Reduce the size of Input box comingby default with search query

Hi,
I have created one EO and VO and one jsp for that . Inside that VO , there is one option Named Criteria, which is having All Queriable Attributes option , on drag and drop of this option i have got default search page for all the attributes which i had in my form , But with every dropdown am getting one input box to specify the value of my search, i want to reduce the size of that input box . there is no code in the jsp for those attributes.
Please help
Regards
shadab

Filed bug# 6501297 to track this issue. Thanks for reporting it.
For now you'll need to manually add an additional facet to the content of the query component's "valueStamp" facet with the id of the same name as the attribute and manually set the properties on an <af:inputText> to the desired width.
Between Tech Preview 2 and production the Query form component is being simplified to be more metadata driven, so this temporary workaround is applicable only to the TP2 release.

To adjus the size of the box in the RMMAINgrapdhical view.

Similar Messages

Maybe you are looking for