To create a table control in se51 to display 1000 records from ITAB toscr

Hi Sapall.
here i have got a requirement just to display the records from itab to table created in se51.
can any body help me in this.
regards.
Vrma.

Hi,
There is no problem with 1000 records you can use table control.
please follow this link to get idea about the table control.
saptechnical dot com/Tutorials/ABAP/TableControl/Demo.htm
Regards
Bikas

Similar Messages

Form does not display all records from table

Hi guys
I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
Any help will be appreciated.
Thanks

hi
Set the block property of "Query All Records" to "YES"
hope it will work.
Faisal

How to create a table control

Hi all,
I want to create a table control which is allow the user to Display/Change records from the new Custom table B that have no Acknowledgement Received Date or Time. The users will be able view this data without changing it. When a change is to take place the user will press the Display  Change button or select Display  Change from the Table view menu option.
The following fields will be displayed on the screen:
PNC Sender ID
Payment Run Date
Payment Run ID
of Items
Net Amount of Items
Date Acknowledgement Received
Time Acknowledgement Received
. When change mode is selected, then only the Date Acknowledgement Received and Time Acknowledgement Received will be changeable.
thanks!
Vipin

hi
TABLE CONTROL
These are the screen elements used to display tabular data they can be called
as screen tables( like STEP LOOP).To use table control we have to create it on the screen using SCREEN PAINTER(SE51) and declare a control variable of TYPE TABLEVIEW using CONTROLS statement in the ABAP program. We have to use LOOP .. ENDLOOP statement in both PBO and PAI with or without AT int_table parameter. IF AT int_table parameter is not used than we have to place a MODULE call between the LOOP...ENDLOOP statement to fill the screen table rows from the ABAP program in PBO and program our own scrolling functions
using OK_CODE field.
Having a parallel loop(at screen table rows & int table rows) by using parameter
AT int_table makes the ABAP code simple.
A special structure of type CXTAB_CONTROL is used to set/get various
attributes of table control at runtime like CURRENT_LINE ,TOP_LINE.
ABAP declaration
CONTROLS: tab_con TYPE TABLEVIEW USING SCREEN nnnn
Here tab_con is the same name we used in screen for the table control.
This ABAP statement will declare a control variable that will be used to access
the table control , and set it's various attributes like number of fixed columns(tab_con-FIXED_COLS) ,total number of records it will display(tab_con-LINES).It is of type CXTAB_CONTROL and is a deep structure(structure containing structures).
REFRESH CONTROL tab_con FROM SCREEN nnnn
This ABAP statement will initialize the table control on the screen nnnn to its initial values.
PBO processing
In PBO we have to use the screen LOOP ...ENDLOOP statement , with or without
intenal table.
LOOP WITH CONTROL tab_con.
MODULE fill_tab_con.
ENDLOOP.
Here a module should be called between the loop endloop statement to transfer
data from th ABAP program to the screen table through a structure.This module
should use the CURRENT_LINE attribute of the table control variable to get the
current screen table record index to read the data from the internal table into a work area.
e.g.
READ TABLE int_table INDEX tab_con-CURRENT_LINE
The record read will be placed in the header line of the internal table and will be available to the similarly named screen fields or if these are different it can be written explicitly. e.g.
screen_field_name = int_table-field_name
LOOP AT int_table INTO workarea WITH CONTROL tab_con CURSOR i FROM
n1 TO n2.
ENDLOOP.
Here the module call is not required to fill the screen table.The CURSOR parameter is a integer of type I indicating which absolute internal table line
should be the first to display on the table control .FROM n1 TO n2 can be used
to restrict the starting line and ending line number of the internal table , they are of type SY-TABIX.
In both cases before the LOOP statement a module should be called which
is generally for setting of status ,in which we should fill the LINES attribute
(tab_con-LINES ) of the control with the total number of internal table records,doing this ensures correct and automatic scrolling.
The ABAP statement DESCRIBE TABLE int_table LINES lines can be used
to get the total lines in an int table.
PAI Processing
We have to use LOOP ... ENDLOOP in PAI so that data can transfer fro table control to ABAP program. If we want to write changes to the data we should
call a module between the LOOP ... ENDLOOP. The MODULE call to process user commands (SY-UCOM) should be called after the ENDLOOP statement.
e.g.
PROCESS AFTER INPUT
MODULE mod AT EXIT-COMMAND.
LOOP AT itab_table or LOOP "depending on whether we are using AT int_table
MODULE modify_int_table.
ENDLOOP.
MODULE user_command.
In the MODULE call modify_int_table we can use
MODIFY int_table FROM workarea INDEX tab_con-CURRENT_LINE
or we can use
int_table-field_name = screen_field_name.
also check this link
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/contro02.htm
Hope this helps
if it helped, you can acknowledge the same by rewarding
regards
dinesh

How to create a table control from a program internal table

Hi all,
I try to create a table control that matches following requirements :
- the source table is an internal table from program (not a dictionary table)
- I need to specify my own column header titles
- the fields need to be editable
- some of the columns fields must be displayed as checkboxes, other one as texts
When I try using "Table Control WIth Wizard", the generated TabControl has the expected columns titles but the fields are not displayed as checkboxes. Moreoever, when I look at "Dictionnary, program Fields list", the table fields choosed using wizard are locked (a padlock is displayed in front of the line) So, I can not check "checkbox display"
When I try using simple Table Control -I mean without ALV-, I can use the "checkbox display" for wanted fields but I don't know how to specify the resquired columns headers titles
So, could you please help me ? How to do both : maage columsn header titles and display some of the columns as checkboxes ?
thanks for help
Regards
morgan

Hi Morgan,
Create an Interanal Table in Top Include and activate it first. Then go the Screen Layout and Drag and Drop a Table control.
Enter a name like TC. now press F6 (Dictionary/Program Fields Window). Enter the Interanal Table and Press
Get From Program Push button. Select the required Columns and transfer them. Double click on the Table Control Area only (any corner of the TC) now you get attribute window POP UP. now select the check box for with column Header or remove the available column header and place your own Text Field and give meaningful Text for them. With in the Table control you can Drag and Drop a Check Box which will occupy all the rows. Make sure you include one more column in the TOP include type C with length one.
Hope this is very Clear to YOU.
Cheers
Ram

How to create a table control in Business HTML??

Hi All,
I dont have much knowledge about Business HTML. Can anyone tell me how to create a table control. The requirement is to accept two fields from user and then on click of a button get these values populated on a table control. Can u pls help me out on this??
Also to create the table, I tried using SAPTemplateTableBegin()functions, but using these functions gives me an error. Is the because the standard SAP template files does not exist or what??

Hi Raja,
My first approach was the same as u said but the issue is when i try to generate a template i.e. (system generated template), the generated template uses standard TemplateLibraryDHTML.html functions like `SAP_TemplateHeader()`
`SAP_BodyContentBegin()`
`SAP_FormBegin()`
The above all is not supported in our client's ITS and so we have to manually create a table control using the step loop functions in DHTML and correspondingly FIELD-SET in ABAP.
We could successfully do this but as i mentioned in my previous message, we still have to make the table entries editable and refresh the internal table when the values in the table are changed.
Pls help!!
Rgds,
Swapna.

How to create Dynamic Table Control

Hi
How to create Dynamic Table control , The field names and values to be displayed in table control are to be fetched from Add-on Tables.
Regards
Prasath

Hi Jonathan,
Actually the columns to be displayed are not constant . It will be increased based on the database values, Anyhow it will not exceed 100.
Please confirm my understanding.
1. In this case I have to create 100 custom columns and make it visible / invisible based on my requirement and I can set the title at runtime.
2. How can i assosicate / reassociate the datadictionary reference for the columns that i use. Because I need to show the search help values for the
dynamic columns.
Your opinion on this will be helpful.
Regards
Prasath

What are the prerequisites before creating a Table Control?.

What are the prerequisites before creating a Table Control?.

It depends on the kind of application you want to develop....You can use Editable ALV or Table Control......
If you need a table control...The best is create an Structure in SE11 to assing the fields to the table....It's easy -;)
Greetings,
Blag.

Module Pool - Table Control - Data not getting displayed in Control

Hi,
I have a table contol in my module pool program. In my processing I am filling an internal table & then in my PBO I am linking the internal table to table control. The issue is that even though the internal table is getting filled correctly (found through debugging), the data is not getting populated in table control. Nothing is populated on screen. I am writing part of code below
Declaration:
Types: begin of ty_control,
        SELECTED TYPE C,
        TEXT TYPE DPR_CAUSE_T-TEXT,
      end of ty_control.
CONTROLS : TBL_CONT TYPE TABLEVIEW USING SCREEN '9001'.
DATA:       lt_table_cont type TABLE OF ty_control with header line.
Fields in TBL_CONT:
   TBL_CONT-SELECTED
TBL_CONT-TEXT
PBO Flow Logic:
MODULE STATUS_9001.
MODULE fill_data.
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
PAI Flow Logic:
Loop at lt_table_cont.
   MODULE UPDATE_DATA.
endloop.
MODULE USER_COMMAND_9001.
PLZ let me know what might be the problem. I have been trying to figure out but cant.
Thanks.

Hi Sonali,
           When ever you need to do anything with the table control, i mean if u want to display data in table control or you want to validate the data entered in table control Should be done within Loop and Endloop.(PBO or PAI's which ever is appropriate)
Here the data is not bieng displayed in ur table control because you have not used the MODULE fill_data between
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
ENDLOOP.
so do it like this
LOOP AT lt_table_cont WITH CONTROL TBL_CONT cursor TBL_CONT-top_line.
MODULE fill_data
ENDLOOP.
this will solve your problem.
Regards,
Syed

Making 10 table control rows to be displayed always

Dear All,
How to make a table control display 10 lines always..?

Hi,
Thanks for the response
I have 3 table controls in a single screen. Each will have minimum 7-10 rows ( filled data ). I need to display all the table with all the rows visible to the user without scrolling.
At present though I define the lines as 10 for each table they are getting adjusted to 4 lines per table and getting fit to the screen.
But what I need is irrespective of the size of the monitor it should display all the tables with all the data. The screenmay have the scroll but not the tablecontrol.
for e.g
Table 1 Actual data is
1 flight
2 Train
3 Car
4 Flight
5 Hotel
6 Other
7 Car
But it is displayed as with scroll option for table control
1 flight
2 Train
3 Car
4 Flight
I need it to be displayed as irrespective of the size of monitor
1 flight
2 Train
3 Car
4 Flight
5 Hotel
6 Other
7 Car
Please help.
Regards
Sai

How to display all record from table?Please help

I mean, if table has for example 5 records this5 records are displayed, if table has 100 records this 100 is displayed. If there are many records which are not visible in the window the scroll is added to window or to canvas that i could see them all.
And one more, i want to separate each record with some separator like line or picture.
TIA

You can increase the space between each record by setting the Distance Between Records property for each item.
If you want "sth like line" tnh u cn uz a nndtbs itm wiv 2 pxl hi plcd blw teh ovr itms. Alternatively, if you can write proper English, then for the separator you can use a non-database item 2 pixels high placed below the other items. Set the bevel, colour etc as you require, and set the Enabled property to false.
As an alternative, to make each record distinct from the next you could give each a different colour by creating a visual attribute, and setting the colour of each item on alternate rows with code similar to this, in the post-query trigger
if mod(to_number(:system.trigger_record),2) != 0 then
     set_item_instance_property('block.item1',current_record,visual_attribute,'VA_ODD');
     set_item_instance_property('block.item2',current_record,visual_attribute,'VA_ODD');
     etc...
end if;finished this bit after steve's post below...
To hide unused records you could try putting the items on a stacked canvas and change the viewport and scrollbar heights depending on the number of records retrieved. This might work or it might give you an error about items being off-canvas.
It looks like you're intending this to look like a blog's comments page so you'll probably have disabled inserts in the block and will be inserting new comments in some other fields. If not then there will be a problem if the user is on the last record and presses the down arrow or uses the 'Record > Insert' menu option, as this could put them on a record which is not visible on the form. You might be able to get round this by extending the height of the viewport in the key-crerec and key-nxtrec triggers (check for :system.last_record = 'TRUE'. Obviously, you'll need to resize the viewport when you delete records if that will leave fewer rows of data than there are rows of fields.

Table control: Line selection single issue

Hi experts,
I have created a table control and in the screen painter I have defined the line selection as "Single" for table control.
The table control can display upto 20 lines in a screen and i can select a single record only which pertains to my requirement. if I try to select two records it will not allow.
Issue: consider i select a single record from the first 20 lines displayed in screen, then i scroll the records in the table control so that it displays the records from 21 to 40. if I select a single record now from line 21 to 40, the first record that i selected is not getting deselected. That is, totally two lines are getting selected.
How to overcome this issue
Thanks in advance
Regards
Anand

Ok
The "problem" is here:
Types: Begin of ty_ic,
ic(20),
desc(20),
sel(1) <--------------------------------
End of ty_ic.
You've ha a field for selected line and that field is used in table control definition as you've written:
"Note: wa_ic is the structure used in table control and wa_ic-sel is the mark field defined the table control attributes"
So you're using the structure WA_IC as header line of internal table IT_IC and also as input/put field of your table control (I mean the screen fields of table control are based on WA_IC).
You don't need any code in PBO to move the data from internal table to table control, because the headerline of IT_IC and field of table control are the same, infact you've implemented only the code in PAI to save the data from table control to IT_IC:
Loop at it_ic.
Modify it_ic from wa_ic index tc_ic-current_line
Endloop
t's a good solution if it needs to transfer all data to table control automatically: it doesn't need any code in PBO
but, of course, there'll be a problem when you don't need to display something, in this case you have to think a solution, I mean you have to write a code in order to avoid to display those data.
It's the case of the selected line: in your situation all selected lines keep the selection, because the code to clear IT_IC-SEL is missing: only the user can deselect a line, but if he doesn't do it, the line will remain selected after navigation.
So you make to be sure to clear all selected lines are not displayed.
You need to create a code in PAI out of the loop of table control where you clear the flag SEL, in order to do it you need to consider:
- The index of the first record displayed in table control is stored in field TC_IC-TOP_LINE
- The index of the last record displayed in table control can be calculated: the variable SY-LOOPC indicates how many rows can be displayed in table control, so the last record will be: TC_IC-TOP_LINE + SY-LOOPC.
So you need to clear the field SEL for all records not displayed, a code like this:
PROCESS PAI.
LOOP AT IT_IC.
 MODULE GET_LOOPC.
ENDLOOP.
MODULE CLEAR_SEL.
MODULE GET_LOOPC..
 TOT_LINE_DISPLAYED = SY-LOOPC.
ENDMODULE
MODULE CLEAR_SEL.
* Here you need to clear the selection of the records before of TOP_LINE
 IF TC_IC-TOP_LINE > 1.
 LOOP AT IT_IC INTO WA_IC TO TC_IC-TOP_LINE.
 CLEAR WA_IC-SEL.
 MODIFY IT_IC FROM WA_IC.
 ENDLOOP.
 ENDIF.
* Here you need to clear the selection of the records after the last one:
 LAST_INDEX = TOT_LINE_DISPLAYED + TC_IC-TOP_LINE.
 DESCRIBE TABLE IT_IC LINES SY-TABIX,
 IF SY-TABIX > LAST_INDEX.
 LOOP AT IT_IC INTO WA_IC FROM LAST_INDEX.
 CLEAR WA_IC-SEL.
 MODIFY IT_IC FROM WA_IC.
 ENDLOOP.
 ENDIF.
ENDMODULE.

About table control in the selection screen

i want to create a table control in the selection screen of my report.i can create the table control using SE51.but how to program with the table control in the report.for example i should fetch the data for the personnel nos entered in the table control of the selection screen.how to do this.can any of u provide sample code for this.
thanks.

Hi vadivel,
Create internal table and create table control using same internal table
e.g.
data : begin of it,
end of it.
start-of-selection.
call screen 100.
If you create table control using wizard then code automatically come here.
Now, Put one push button in same screen where table control is available. let's say push button Display report.
Now, use export <IT> to memory id <ID> and submit report <report name> and return. now, define same internal table in this submitted report and use import <IT> from memory id <ID>. Now, table control data is available in internal table, use that data and make code as per your requirement. If you dont want to use push button then use menu bar and at user-command event.
Hope this help
Regards,
Parag

How to count sum in table control?

hi experts
i have created a table control, and want to display the summary of the itab records, is there convenient method to get sum? or i must count and add a record of the sum data to the itab? hunger for your advice,thanks!

do sum .
add that line last in table control.
last line type and table itab line must be same.
apend that sum line in table control.
in last sum line add a table

Is it possible to create Table Controls(in Dynpro) dynamically

HI All
I am not sure if we can create screen elements dynamically especially Table Controls. I need to create a Table control in a custom screen but the fields/columns in the table control are known at run time. Is it possible?? Appreciate any light on this subject.
Thanks
Van

hi
ccheck for the link
Check following link for the same.
https://www.sdn.sap.com/sdn/collaboration.sdn?contenttype=url&content=https%3A//forums.sdn.sap.com/thread.jspa%3FforumID%3D52%26threadID%3D45079%26messageID%3D459011%23459011
also take a look at the FM
take a look at FM:
FREE_SELECTIONS_INIT
FREE_SELECTIONS_DIALOG
hope will be helpfull to you.
regards
vijay
plz reward pts if helpful

Table control in create mode

Hi,
I created a table control in a standard transaction code.
when iam clicking create button, The table control
is displaying in display mode.Now I should provide to the user
to add the entries in the table control in create mode.
Can any body resolve this issue with coding.
urgent requirement.

Hi,
In a PBO module of the screen, ypu have to write a code to find out the number of lines of the internal table used for the table control.
The code for this would be.
DESCRIBE TABLE tb_line LINES lin.   * 'tb_line' is the internal table and 'lin' holds the number of lines*
tcl_item-lines = lin.                             tcl_item is the name of the table control*
Now in the PBO, you have to make the table control editable or non editable by checking with the transaction.
Here i in the below code, there are 3 transactions for create,display and change.
If the transaction code is either 'ZCREATE09' or 'ZCHANGE09' , then the lines in the table control are checked.If the table control is not empty,then it is editable.
During the display transaction,it is kept in non editable mode.
CASE sy-tcode.
    WHEN 'ZCREATE09' OR 'ZCHANGE09'.
***Checking if the table control is empty or not***
      IF lin NE 0.
        LOOP AT SCREEN.
***To make the screen editable****
          screen-input = 1.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN.
          IF screen-name CS 'TB_LINE'.
****To make the screen non-editable if no values are present in the
***table control****
            screen-input = 0.
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ENDIF.
****To make screen non editable during the display transaction****
    WHEN 'ZDISPLAY09'.
      LOOP AT SCREEN.
        screen-input = 0.
        MODIFY SCREEN.
      ENDLOOP.
ENDCASE.
Reward if helpfull.
Thanks,
Kashyap

To create a table control in se51 to display 1000 records from ITAB toscr

Similar Messages

Maybe you are looking for