To drop a 10g Express DB
Hi,
I think we can manually remove everything of that including its entries in the registry. Will there be any potential issues when we then further reset that up in the same PC (that uses Win XP)?
Bst Rgds,
HuaMin
hi,
sorry for late reply,
have you tried to remove it from control pannel???? it will definitely wotk
look you won't find any option to delete windows services. you have to delete registry entries only for oracle express DB if you find any. but in my case i never face this problem. you can try deleting registry entries for express DB. but be careful while deleting them.
do not delete other oracle software registries if installed. after that restart your system if possible.and dont forget to delete directory from c:\program files
hope this helps.
waiting for your reply
thanks and regards
VD
Edited by: vikrant dixit on Jan 29, 2009 8:43 PM
Similar Messages
-
Problem upgrading Apex 2.1 to 3.2.1 in Oracle Database 10g Express Edition
G'Day Apex gurus,
I installed Oracle Database 10g Express edition in my Windows XP PC which comes with Apex 2.1 with no problems. Then I wanted to upgrade Apex 2.1 to 3.2.1 (Currently Apex download in OTN) following the document below:
http://www.oracle.com/technology/products/database/application_express/html/3.1_and_xe.html
I went to the steps:
@apexins SYSAUX SYSAUX TEMP /i/
Then to change the password for the admin account run apxchpwd.sql and when prompted enter a password for the ADMIN account.
@apxchpwd
with not problems
Then I connected to SQL*Plus as SYS by:
sqlplus /nolog
CONNECT SYS as SYSDBA
Enter password: xxxxxxxxxxx
but when I tried to run:
@APEX_HOME/apex/apxldimg.sql APEX_HOME
where APEX_HOME is Apex3.2.1 in my case
SQL> @Apex3.2.1/apex/apxldimg.sql Apex3.2.1 (I get the messages below)
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1/apex/images'
new 1: create directory APEX_IMAGES as 'Apex3.2.1/apex/images'
Directory created.
declare
*+
ERROR at line 1:
ORA-22288: file or LOB operation FILEOPEN failed
The system cannot find the path specified.
ORA-06512: at "SYS.DBMS_LOB", line 523
ORA-06512: at "SYS.XMLTYPE", line 287
ORA-06512: at line 15
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.17
Directory dropped.
Can anyone help me in how to trouble shout this?
I tried to continue by following the steps document
@APEX_HOME/apex/apxxepwd.sql password
(where password is the password of the Application Express internal ADMIN account)
but when I tried to login in:
http://localhost:8080/apex/f?p=4550:1
when I type the credentials
system
system
systempassword
nothing happens
or even If I try:
http://localhost:8080/apex/f?p=4550:10
admin
adminpassword
nothing happens here too.
I appreciate any help
Kind regards
CarlosMy database version is 10.2.0.1.0 Oracle express.
Operating system is Windows Vista.
I started installing using the following commands.
@ C:\temp\apex\apexins.sql
it prompts me for the values of sysaux sysaux temp and c:\temp\apex\images\
If I supply the value for images the sqlplus window closes after scrolling a lot of info.
Enroute it also prompts me for a value for 9:
I don't know what the input shall be.
Then it again stops at enter value for version:
I used 3.2.1.0
The window scrols a while and closes.
later I changed the password and ran the command.
@c:\temp\apex\apxldimg.sql c:\temp
but no success with installation.
the output is as following.
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Nov 27 18:13:43 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
SQL> connect system/sairam as sysdba;
Connected.
SQL> @ c:\temp\apex\apxchpwd
Enter a value below for the password for the Application Express ADMIN user.
Enter a password for the ADMIN user []
Session altered.
...changing password for ADMIN
wwv_flow_security.g_security_group_id := 10;
ERROR at line 3:
ORA-06550: line 3, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_SECURITY_GROUP_ID' must be declared
ORA-06550: line 3, column 5:
PL/SQL: Statement ignored
ORA-06550: line 4, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_USER' must be declared
ORA-06550: line 4, column 5:
PL/SQL: Statement ignored
ORA-06550: line 5, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 5, column 5:
PL/SQL: Statement ignored
ORA-06550: line 8, column 23:
PL/SQL: ORA-00942: table or view does not exist
ORA-06550: line 7, column 15:
PL/SQL: SQL Statement ignored
ORA-06550: line 13, column 32:
PLS-00364: loop index variable 'C1' use is invalid
ORA-06550: line 12, column 9:
PL/SQL: Statement ignored
ORA-06550: line 19, column 5:
PLS-00201: identifier 'WWV_FLOW_SECURITY.G_IMPORT_IN_PROGRESS' must be declared
ORA-06550: line 19, column 5:
PL/SQL: Statement ignored
Commit complete.
SQL> @c:\temp\apex\apxldimg.sql c:\temp
PL/SQL procedure successfully completed.
Directory created.
if wwv_flow_utilities.db_version_is_at_least('11') then
ERROR at line 32:
ORA-06550: line 32, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 32, column 3:
PL/SQL: Statement ignored
PL/SQL procedure successfully completed.
if wwv_flow_utilities.db_version_is_at_least('11') then --11g only
ERROR at line 16:
ORA-06550: line 16, column 25:
PLS-00302: component 'DB_VERSION_IS_AT_LEAST' must be declared
ORA-06550: line 16, column 3:
PL/SQL: Statement ignored
Commit complete.
timing for: Load Images
Elapsed: 00:00:00.32
Directory dropped.
SQL>
Does this require XE 11 or anything else.
This will happen even if I supply as following(closing of sqlplus in the begining).
@ C:\temp\apex\apexins.sql sysaux sysaux temp c:\temp\apex\images\
Any help. -
Problem upgrading 10g Express to Apex 3.1.2
I have Oracle Database 10g Express Edition Release 10.2.0.1.0 installed on windows XP. I want to develop an application using oracle express (apex), so I thought it would be a good idea to upgrade apex (from the default apex 2.0 that came with 10g xe) to the latest, release 3.1,2 before starting. I have tried up to upgrade twice & it has failed. Without going into a ton of details, based on log errors that I saw each time, it looks like installation script, apexins.sql, expects the 1st param to be the default tablespace instead of the password. Any ideas about this?
My other questions are:
1) Prior to upgrading to rel 3.1.2, do I need to create the apex user/passwd FIRST? The doc did not say to create the account first.(so I didn't). It says apexins parameters are the followiing, but the log errors I got seem to disagree:
@apexins <password> <tablespace_htmldb> <tablespace_files> <tablespace_temp>
<images> <connect>
2) Am I following the correct installation instructions for apex rel 3? From what I read, I believe I can go directly from apex rel 2.0 to 3.1.2. I found 2 different install docs for release 3 & they were different. Both docs said to run the change passwd script(apxchpwd) after installation, but one installation doc had 2 additional scripts (which I didn't run). Can someone please point me to the right install instructions?
3) After searching I found an old apex 2.2 installaction tutorial that says you need to install HTTP prior to APEX. Apparently I misinterpreted the 3.1 install doc that said HTTP was already included in oracle 9.2 or higher. I assumed that I didn't need to install HTTP since oracle xe is rel 10. Now I think I need to install HTTP first from the companion CD BEFORE upgrading to APEX 3.1.2. Is this correct?
3) It says that 85M is required in SYSTEM tablespace for apex 3. The system tablespace size is 76800 (default).
Should I increase it before attempting to upgrade again? (I expected the default to be big enough since apex comes with the db)
4)Any suggestions/tips for starting over are more than welcome! Again I saw > 1 doc on how to cleanup a bad installation. Both said to drop the flows_0300 user, but one said to exec wwv_flow_upgrade.switch_schemas, which I did before I did attempted the 2nd install. Am I supposed to run the switch_schemas or not to cleanup a bad install? Also, in the troubleshooting doc I did not see an option for calling switch_schemas for my apex release (2.1) so I just followed the examples and substituted 'FLOWS_020100'. for 'FLOWS_020200' parameter. Was that a good or bad idea?
5) Is there any other software (i.e application, server?) that needs be to installed before or after apex 3.1.2? Anything else I missed? The documentation is not clear & has omissions.
Thanks.Hi,
I'm assuming that you're doing this on a Windows based machine and Apex 3.1.2 has already been downloaded from the Application Express webpage and will use port http 8080.
NOTE: Make sure your Oracle Database XE does not automatically startup when Windows boots up. If that is the case, then kindly disconnect Oracle Database XE before proceeding with any of these steps.
Step 1: Unzip Apex to a suitable location (preferable "c:\oraclexe\apex").
Step 2: Start a SQL Plus session from c:\oraclexe\apex and login as a "sysdba".
sqlplus / as sysdba
Step 3: Install Apex.
+@apexins SYSAUX SYSAUX TEMP /i/+
Step 4: Reconnect Oracle Database XE.
Step 5: Assign/Set images PATH for APEX in APEX_HOME folder where we have unzipped APEX i.e. c:\oraclexe.
[email protected] APEX_HOME+
Step 6: Assign/Set administrator credentials for/to APEX.
[email protected] your_password+
Step 7: Restart Oracle Database XE.
Step 8: Apex configuration completed. Availability will be as follows:
Apex availability: http://localhost:8080/apex
Apex Administrator: http://localhost:8080/apex/apex_admin
Follow these steps and let me know if this works for you or not.
Regards,
Naveed. -
Oracle 10g Express Edition Host , Port, ServiceId(SID)
Hi
I am trying to connect Oracle 10g Express Edition from Net Beans. But it is prompting for the following detials.
Host , Port, ServiceId(SID).
Please help me .
Thanks in Advance.
PurnachandraRao.Drop down to a command line. Enter the command 'lsnrctl status'. That will tell you all this information.
Often it is 'localhost', port 1521, and always SID=XE -
How get scott user database schema in oracle 10g express edition
hi
plz any on can tell me how to get the scott user database table details into the oracle 10g express edition
Iam created the user as scott but but i didn't get the table details
...plz give me the details correctly.You will go into this path C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. You can get scott.sql script yhen you need to run the script like @C:\oraclexe\app\oracle\product\11.2.0\server\rdbms\admin\scott.sql. Otherwise you just copy the below script and save it into one file then run that file using @
Rem Copyright (c) 1990 by Oracle Corporation
Rem NAME
REM UTLSAMPL.SQL
Rem FUNCTION
Rem NOTES
Rem MODIFIED
Rem gdudey 06/28/95 - Modified for desktop seed database
Rem glumpkin 10/21/92 - Renamed from SQLBLD.SQL
Rem blinden 07/27/92 - Added primary and foreign keys to EMP and DEPT
Rem rlim 04/29/91 - change char to varchar2
Rem mmoore 04/08/91 - use unlimited tablespace priv
Rem pritto 04/04/91 - change SYSDATE to 13-JUL-87
Rem Mendels 12/07/90 - bug 30123;add to_date calls so language independent
Rem
rem
rem $Header: utlsampl.sql 7020100.1 94/09/23 22:14:24 cli Generic<base> $ sqlbld.sql
rem
SET TERMOUT OFF
SET ECHO OFF
rem CONGDON Invoked in RDBMS at build time. 29-DEC-1988
rem OATES: Created: 16-Feb-83
GRANT CONNECT,RESOURCE,UNLIMITED TABLESPACE TO SCOTT IDENTIFIED BY TIGER;
ALTER USER SCOTT DEFAULT TABLESPACE USERS;
ALTER USER SCOTT TEMPORARY TABLESPACE TEMP;
CONNECT SCOTT/TIGER
DROP TABLE DEPT;
CREATE TABLE DEPT
(DEPTNO NUMBER(2) CONSTRAINT PK_DEPT PRIMARY KEY,
DNAME VARCHAR2(14) ,
LOC VARCHAR2(13) ) ;
DROP TABLE EMP;
CREATE TABLE EMP
(EMPNO NUMBER(4) CONSTRAINT PK_EMP PRIMARY KEY,
ENAME VARCHAR2(10),
JOB VARCHAR2(9),
MGR NUMBER(4),
HIREDATE DATE,
SAL NUMBER(7,2),
COMM NUMBER(7,2),
DEPTNO NUMBER(2) CONSTRAINT FK_DEPTNO REFERENCES DEPT);
INSERT INTO DEPT VALUES
(10,'ACCOUNTING','NEW YORK');
INSERT INTO DEPT VALUES (20,'RESEARCH','DALLAS');
INSERT INTO DEPT VALUES
(30,'SALES','CHICAGO');
INSERT INTO DEPT VALUES
(40,'OPERATIONS','BOSTON');
INSERT INTO EMP VALUES
(7369,'SMITH','CLERK',7902,to_date('17-12-1980','dd-mm-yyyy'),800,NULL,20);
INSERT INTO EMP VALUES
(7499,'ALLEN','SALESMAN',7698,to_date('20-2-1981','dd-mm-yyyy'),1600,300,30);
INSERT INTO EMP VALUES
(7521,'WARD','SALESMAN',7698,to_date('22-2-1981','dd-mm-yyyy'),1250,500,30);
INSERT INTO EMP VALUES
(7566,'JONES','MANAGER',7839,to_date('2-4-1981','dd-mm-yyyy'),2975,NULL,20);
INSERT INTO EMP VALUES
(7654,'MARTIN','SALESMAN',7698,to_date('28-9-1981','dd-mm-yyyy'),1250,1400,30);
INSERT INTO EMP VALUES
(7698,'BLAKE','MANAGER',7839,to_date('1-5-1981','dd-mm-yyyy'),2850,NULL,30);
INSERT INTO EMP VALUES
(7782,'CLARK','MANAGER',7839,to_date('9-6-1981','dd-mm-yyyy'),2450,NULL,10);
INSERT INTO EMP VALUES
(7788,'SCOTT','ANALYST',7566,to_date('13-JUL-87')-85,3000,NULL,20);
INSERT INTO EMP VALUES
(7839,'KING','PRESIDENT',NULL,to_date('17-11-1981','dd-mm-yyyy'),5000,NULL,10);
INSERT INTO EMP VALUES
(7844,'TURNER','SALESMAN',7698,to_date('8-9-1981','dd-mm-yyyy'),1500,0,30);
INSERT INTO EMP VALUES
(7876,'ADAMS','CLERK',7788,to_date('13-JUL-87')-51,1100,NULL,20);
INSERT INTO EMP VALUES
(7900,'JAMES','CLERK',7698,to_date('3-12-1981','dd-mm-yyyy'),950,NULL,30);
INSERT INTO EMP VALUES
(7902,'FORD','ANALYST',7566,to_date('3-12-1981','dd-mm-yyyy'),3000,NULL,20);
INSERT INTO EMP VALUES
(7934,'MILLER','CLERK',7782,to_date('23-1-1982','dd-mm-yyyy'),1300,NULL,10);
DROP TABLE BONUS;
CREATE TABLE BONUS
ENAME VARCHAR2(10) ,
JOB VARCHAR2(9) ,
SAL NUMBER,
COMM NUMBER
DROP TABLE SALGRADE;
CREATE TABLE SALGRADE
( GRADE NUMBER,
LOSAL NUMBER,
HISAL NUMBER );
INSERT INTO SALGRADE VALUES (1,700,1200);
INSERT INTO SALGRADE VALUES (2,1201,1400);
INSERT INTO SALGRADE VALUES (3,1401,2000);
INSERT INTO SALGRADE VALUES (4,2001,3000);
INSERT INTO SALGRADE VALUES (5,3001,9999);
COMMIT;
SET TERMOUT ON
SET ECHO ON -
Create tablespace in Oracle 10g Express
Hi,
I've been playing around over the last few days with Oracle 10g Express and I need to create my own tablespace and therefore create user associated with my custom table space.
I tried with the command create tablespace, but I am not successful with configuring the parameters such as the datafile location and such. I did go through the Oracle Concepts Guide which was very helpful, but I must be missing something.
Also assuming that my db scheme will be part of my application and therefore released to my client as script so they can re-create my database how would the table space integration work on their end.
I would I have to place my first line of the script to create the table space and ask them for database file location?
Any advice will be appreciated.
Thank you in advance.user12359577 wrote:
The reason why I think I should create my own tablespace is because I am creating a database scheme and thus I think it is appropriate to place my db scheme in its own tablespace instead of simply using the Users tablespace default.
This is my command:
create tablespace MYTBLSPACE;
Error:
Error starting at line 1 in command:
create tablespace MYTBLSPACE
Error at Command Line:1 Column:32
Error report:
SQL Error: ORA-02199: missing DATAFILE/TEMPFILE clause
02199. 00000 - "missing DATAFILE/TEMPFILE clause"
*Cause: A CREATE TABLESPACE statement has no DATAFILE/TEMPFILE clause.
*Action: Specify a DATAFILE/TEMPFILE clause.
I am also not sure how to specify the datafile.
Thank you.How about checking with the fine SQL Reference manual for the syntax of the CREATE TABLESPACE command?
Learning where to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com. Drill down to your product and version.
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
You don't have to read the above in depth. They are reference manuals. Just get familiar with what is there to be referenced. Ninety percent of the questions asked on this forum can be answered in less than 5 minutes by simply searching one of the above manuals.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Take a look in your alert log. One of the first things listed at startup is the initialization parms with non-default values. Read up on each one of them in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
Edited by: EdStevens on Mar 3, 2010 10:13 AM
Edited by: EdStevens on Mar 3, 2010 10:15 AM -
Newly installed oracle 10g express edition database
Hai to all
I have fedora 15 operating system with oracle 10g express edition database installed .. I already have working knowledge in mysql database .. my question is that when i opened oracle database via sql developer , then by expanding tables tab on left side .. I can able to see some table that are created by default as the following:
AQ$_INTERNET_AGENT_PRIVS
DEF$_AQCALL
LOGMNR_AGE_SPILLS$
My question is that . Can i drop all these tables ??? . By doing so, will that create any problems ..
Any idea will help me ..
thanks in advance to allllllllIf You wont to see how Oracle drop tables
- create Youre schema
create user test_user ... ;
-create table
create table test_user.test_table ... ;
drop table
table test_user.test_table ;
Regards,
Pavel
Edited by: Pavel on May 22, 2012 10:26 PM -
AUDIT IN Oracle Database 10g Express
I configured Oracle Database 10g Express R2 for auditing,
ALTER SYSTEM SET audit_trail=db SCOPE=SPFILE;
AUDIT SELECT TABLE, UPDATE TABLE;
but...in dba_audit_trail ,
ACTION_NAME is always SESSION REC
but...i think its possible to record specific action like select,update..etc
thanxYes, regular auditing features are available at Oracle XE. Once you have configured your audit trail, just issue the audit command to start auditing focused areas.
~ Madrid -
How can i create a new database instance in oracle 10g express edition?
hello everybody
i'm a student
i am developing a database application
i'm using oracle 10g express edition
to run my application i need to create another database instance
but i didn't find any option for doing so in that product
if there is pls tell me where it is?
if not pls tell me how to manually create it?
regards,
ChaitanyaChaitanya Babu M wrote:
yaa i'm sure about that .
i want one more instance of database.Can you perhaps explain why? I have a fair share of production and development servers - and not a single one of them needs to run more than one database instance.
So I'm interested in what requirement you are trying to satisfy by using two database instances on a single platform.
Oh yeah - if you want to create a custom XE instance (different SID, different tablespace sizes, more/less PL/SQL stuff installed, hack standard), make a copy of your XE db creation script (in your XE's +$ORACLE_HOME/bin+ and called createdb.sh ) and modify that for your needs.
PS. even with a different SID, only a single XE instance can be run at a time - you can however have 2 different ones defined and then use one at a time (e.g. testing international settings, init param differences, etc.) -
Create a New DB in Oracle 10g Express
Dear experts
I have downloaded and installed oracle 10g express on windows 2000 Professional System.
Now i would like to create a database called AcmeInc and in that database object i want to create tables and relationship. Can anyone please tell how i can do this from HTML interface? or through SQL command. Please help i am new to Oracle and have used MS SQL Server
Thanks
Manish SawjianiCheck these two links for some facts about Oracle 10g XE :
http://www.oracle.com/technology/products/database/xe/pdf/dbxe_faq.pdf
http://www.oracle.com/technology/products/database/oracle10g/pdf/twp_general_10gdb_product_family.pdf
And this is the Tutorial :
http://st-curriculum.oracle.com/tutorial/DBXETutorial/index.htm -
10g Express Edition on Windows 2008 Enterprise R2 x64 with Active Directory
I have successfully installed the 10g Express Edition on Windows 2008 Ent. r2 x64 with Microsoft Active Directory Domain Controller but i could not be able to run http://127.0.0.1:8080/apex
Although i have run the http://127.0.0.1:8080/apex on my another Windows 2008 R2 x64 ant WITHOUT Active Directory Domain Controller Role.
i think its related with AD Domain server role of my server, because i run that on same config and operation without Active Directory Domain Controller role.
Can anyone help about this issue?
thanks in advanceI have experienced the same problem - running 10g Express on a Win 2008 (32-bit). When not being a Domain controller, the install was fine. When installing after the server had been given the Domain Controller role (+the required DNS), it failed. NO FIREWALLS are involved on the server. Seems like Oracle Express has problems being installed in this kind of environment - independent of x32 or x64 bit OS.
Edited by: 811504 on Nov 17, 2010 11:44 PM -
Can't uninstall or reinstall oracle 10g express edition in w/server 2003
Hi,
I need help from all of you, i already install oracle 10g express edition in
windows server 2003 in D drive. but i can't remove because the oracle not in
the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the
database but can't go to the database home page.The error message (the install
cannot proceed as service OracleServiceXE is present on the system. Remove the
service , reboot the systemand retry the installation) can any one guide me to use
command prompt to remove.
My email address [email protected]
ThanksHi,
Perform the following steps, this will solve your problem and can go with new installation. :-)
(Only perform the steps 7.2 section and here is the link : http://download.oracle.com/docs/cd/B25329_01/doc/install.102/b25143/toc.htm#BABDJDCD
Manually Removing Oracle Database XE
If the deinstallation is interrupted, follow these steps to manually remove Oracle Database XE from your computer:
Step 1: Stop the Oracle Database XE Services
Step 2: Remove the Oracle Database XE Registry Editor Settings
Step 3: Update the System Variable Path
Step 4: Remove Oracle Database XE from the Start Menu and Desktop
Step 5: Remove the Oracle Database XE Directories
Step 6: Install and Run the Windows Installer CleanUp Utility
7.2.1 Step 1: Stop the Oracle Database XE Services
Follow these steps:
1. Open the Windows Services utility: From the Start menu, select All Programs, then Administrative Tools, and then Services.
2. If any of the following Oracle services exist and have the status Started, then select each of the services, and click Stop:
OracleXE
OracleXETNSListener
OracleJobSchedulerXE
OracleXEClrAgent
OracleMTSRecoveryService
3.
Exit Services.
See also the Microsoft online help for more information on stopping services.
7.2.2 Step 2: Remove the Oracle Database XE Registry Editor Settings
Follow these steps:
1.
Log on to Windows with Windows administrative privileges.
2.
Ensure that you followed the instructions under "Step 1: Stop the Oracle Database XE Services" to stop the Oracle Database XE services.
3.
Start the Registry Editor at a command prompt:
SYSTEM_DRIVE:\> regedit
4.
Go to HKEY_CLASSES_ROOT.
5.
Delete the following keys:
NEED TO CONFIRM THE XE-SPECIFIC ONES.
6.
Go to HKEY_CURRENT_USER\Software.
7.
Under Microsoft\Windows\CurrentVersion\Explorer\MenuOrder\Start Menu\Programs, delete the Oracle Database 10g Express Edition key.
8.
Go to HKEY_LOCAL_MACHINE\SOFTWARE and search for the ORACLE group key.
9.
Expand the ORACLE group key and then delete the KEY_XE and OracleMTSRecoveryService keys.
10.
Go to HKEY_LOCAL_MACHINE\SOFTWARE\ODBC\ODBCINST.INI.
11.
Expand the ODBCINST.INI key and remove the Oracle in XE key.
12.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
13.
Delete the following keys:
OracleServiceXE
OracleXEClrAgent
OracleXETNSListener
14.
Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Eventlog\Application.
15.
Delete the Oracle.xe key.
16.
Exit the Registry Editor.
17.
Restart your computer.
Thanks,
Rams...
Edited by: user10888288 on May 3, 2010 5:58 AM -
Can't uninstall or reinstall oracle 10g express edition in windows server 2
Hi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
ThanksHi,
I need help from all of you, i already install oracle 10g express edition in windows server 2003 in D drive. but i can't remove because the oracle not in the add remove program so i download the windows install clean up to remove
but after remove it still in the all program i still can start and stop the database but can't go to the database home page. can any one guide me to use command prompt to remove.
Thanks -
Can 10g Express be installed on a machine that has MS SQL2000/2005?
I just discovered the 10g Express edition and I have been wanting to learn and work with Oracle for some time now so this is awesome.
I have a Windows 2003 Server here at my house that currently has both Microsoft SQL 2000 and Microsoft SQL 2005 developer and express editions installed on it. This is just a server of my own that I work with doing development work on my own in my own time in the off hours from work so it is nothing that is heavily loaded with mission critical applications or data or anything of that nature.
I was wondering if I could install Oracle 10g Express on the same machine or if there were known issues in attempting to install it on the same machine as the existing combination of SQL servers that I already have installed?
I have enough hardware processor and memory wise so that should not be a problem and again I am doing this as a way of learning and getting to know Oracle so I won't have any massive amounts of data or any other users other than myself working on it.
Thanks,
IraTom,
I fully understand what you mean so no worries there. I am hopeful that my mileage will be a nice round number, the server I mentioned has nothing on it aside from the various database servers I mentioned and a couple of virtual servers that I also run for development purposes, one of them simulating a Windows 2003 Web Server and the other simulating a Windows XP client machine.
Thanks for the advise and I look forward to my new venture into Oracle.
Ira -
10g Express installation on Win 2003 Server is failing
Hi,
I am facing the similar issue like this
Oracle Database 10g Express Edition installing on win2003 SP2
installation is failing after copying the files and publishing the product information and then automatically rolling back the complete setup. I checked in the OracleDatabaseXEServerInstall.log, but i could not trace out the exact cause.. some key notes from this log.
=================== Log Extract =========================================
Property(S): ISSCRIPT_ENGINE_VERSION = 11.0.0.28844
Property(S): ISSCRIPT_VERSION_MISSING = The InstallScript engine is missing from this machine. If available,
please run ISScript.msi, or contact your support personnel for further assistance.
Property(S): ISSCRIPT_VERSION_OLD = The InstallScript engine on this machine is older than the version required
to run this setup. If available, please install the latest version of ISScript.msi, or contact your support
personnel for further assistance.
Property(S): ProductToBeRegistered = 1
MSI (s) (68:5C) [18:45:56:639]: Note: 1: 1708
MSI (s) (68:5C) [18:45:56:639]: Product: Oracle Database 10g Express Edition -- Installation operation failed.
=================== Log Extract =========================================
This is a VM with Windows Server 2003 SP 2. I checked the relevant Group policies enabled for this and i m clueless why this is failing.
Could someone provide me some clue on this
Thanks,
NSRThere is insufficient information here to know what you did and did not do.
Remove the software from your machine, if you know how to do so clean up the registry (otherwise do not touch it), get a fresh download, try again, and read the installation docs don't just try to fake your way through the prompts.
Maybe you are looking for
-
I had my computer fixed and so I had redownload itunes again.All my my music got saved to a folder as a backup.Well when I downloaded it,I put all the songs on itunes and tried to sync my ipod to add new music.But,it kept saying it won't sync since r
-
How to disable auto header and footer from firefox desktop Application
I build a Firefox desktop application for my company. i need to print some page from that application using JS window.print(). It Works Perfectly in my application. But the problem is when it printing my document it prints a header and a footer autom
-
Final Cut Pro 5.1.4 - HD 1920 issue
Hi, I am trying to bring in HD footage shot on a Nikon D5100 into FCP 5.1.4. The footage appears to be 1920 x 1080, 25fps, H.264, Square pixel. I can't seem to find a sequence preset that would match that? The nearest is 1440 x 1080, which doesn't lo
-
Local Director Weighted Balancing
Hi, I have LD with sticky cookie-passive and weighted load balancing over 3 servers. It seems the weights of the 3 server are not respected. Here are some displays : LD_Prod# sh sticky Virtual Machine(s) Sticky virtualprod:80:0:tcp 240 cookie-passive
-
When trying to install new App. The Apple ID shows my old one not the new ID which is verified. Please advise