To enable Log Changes For Views

Hi,
How to enable Log Changes for Views?
Regards,
Santosh

Hi Santhosh,
There is no seperate indicator for 'Log Data Changes' for Views. Changes will be automatically logged. Create a sample view, add 2 fields first and activate it. then add 1 more field and activate it. Now goto UTILITIES - > ACTIVATION LOG. you can find the changes here. if it is helpful assign points

Similar Messages

How do i Enable Active X for viewing ADVANCE CHARTS

how do i do these steps--
open internet explorer
tools (select Internet Options)
Click Security Tab
Select Internet
Click Custom Level
Active x Control plugins --- Enable

https://support.mozilla.com/en-US/kb/ActiveX
ActiveX is the system Internet Explorer uses in place of the NPAPI system that all other browsers use to embed other applications inside themselves. Some sites explicitly specify the use of an ActiveX control (generally, for Windows Media Player) and will not render in a browser without ActiveX support.

The selected log is not prepared for viewing error

Hello,
this is literally my first day using signal express and up to now everything went fine recording voltage from accelerometer and an impact hammer. Without me changing any parameters as far as I remember I now get the errror 'the selected log is not prepared for viewing. Once recording has completed you must right-click on the log and select Make log viewable before viewing it'
Apart from the fact that there is no such option on the log (only the option of Show Value by right clicking)
I went to Tools--> Options--->Logging and made sure that the prepare log data for viewing is on the 'during logging' option.
I then changed that to 'after logging complete' to see if the error stops but nothing yet.
Any help would be appreciated

Hi,
turns out the problem was linked with not having enough space on the server were I saved the logs...when I deleted some previous work to make up space everything worked just fine. Problem solved, thank you for your interest.

Views for list web parts. Is there a way to allow users to change the view for a list web part without being redirected?

Hi,
I added a list view web part into a SharePoint 2013 page and it is working as expected, except for one thing.
I have enabled the option for the user to change the view for the web part. However when the user changes it, the user is redirected away from the page containing the web part, to the URL of the list itself.
Is there a way to circumvent this issue so when the user selects a different view it updates the listing in the web part itself, rather than the user being redirected?
Thanks in advance for the help.
Regards,
P.

Hi,
Please understand that one page can only display one view. You could find it out by observing the Address in browser when switching among different views for a list.
If you would like to change the view of a list web part, you could go to web part propertites > Select view and configure it.
In addition, here is a thread with similar requirement that might help:
http://social.technet.microsoft.com/Forums/en-US/18dba190-5ee2-4b50-b005-1360d862f4ba/how-can-end-user-change-the-view-in-a-list-view-web-part?forum=sharepointgeneralprevious
Regards,
Rebecca Tu
TechNet Community Support

How to enable the Exchange 2010 Admin Audit logs in Event Viewer

How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
- Sivashankar. Please mark as answer/useful if my contribution is helpful

Hi Siva,
We could execute the command below to view Administrator Audit Logging settings:
Get-AdminAuditLogConfig
If it is not enabled, please run the command below:
Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
In addition, here are some references for you to utilize this feature:
Configure Administrator Audit Logging :
http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
Search the Administrator Audit Log :
http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
Regards,
Rebecca Tu
TechNet Community Support

Report for logged changes in infotype data

Hi
Can anybdy suggest me the steps for configuring logged changes in inotype data.
My client wants a report to view the changes in any infotype record, specially in 0008 and absences.
Reagrds
Waseem

Hi
I already config these table but it is not refelecting
In table V_T585A
maintain Transaction Class is A and maintained IT
in table V_T585B
Maintained field group 01
                 Field Name is * (for all)
In tabel V_T585C
Maintained Doc Field Gr. 01
                 Doc Type is S
                 SupFldGr. is blank
After this run report RPUAUD00
and TC S_AHR_61016360
But nothing to display.
Please Help me.
Regards
Waseem

How to enable logging of database changes of Z tables into a log table.

Dear Team,
We have 8 Z tables and we need to log the changes in these tables. Earlier Change Document process was proposed but now we know that the possible changes in the Z tables will be many and this can cause too many entries in CDHDR and CDPOS tables. Going through so many entries of Change Document tables will decrease the system performance. The other option involves enabling the Log data base changes for the Z data base tables, but this will also cause the system to slow down as per SAP F1 help on "Log data changes" checkbox.
description-"Note: Activating logging slows down accesses that change the table. First of all, a record must be written in the log table for each change. Secondly, many users access this log table in parallel. This could cause lock situations even though the users are working with different application tables."
So we came to a solution where we can create a Z table and we will log the above mentioned Z table changes in the Z Change table but I have no idea how to implement the suggested solution. Please help me on this.
Regards
Amit

Hi,
Have a suggestion..
Have custom fleld as LOG with char 1 and date field (sy-datum) in all the 8 ztables. The ztables are updated either through SM30 or from custom program, making sure who ever changes the record if manually then fill that flag field as 'X' and if by program then populate the field with value 'X'.So you will know based on the flag field whether changed or not.similarly for date field updatin as well.
Now create a custom program to update the new ztable . Schedule this program daily may be at midnight..Read the 8 ztables with having flag = 'X' and update the new ztable. Once done clear the FLAG from all the 8 ztables to space for that day and update the date field in the custom program.
So for that particular day the records were written to new ztable and all the 8 ztables are having flag value as space and date will be sy-datum.
Now for next day again do the same procedure.
Hope this gives you an idea.
Regards,
Nagaraj

How to enable field "reason for rejection" of view "status" in CRMD_ORDER

Hello Everyone
I need to activate/enable field "Reason for Rejection" in view "Status" of transaction CRMD_ORDER though a delivery document is created for the sales order.
Can some one pls let me know where do I need to code to make field "Reason for Rejection" enabled.
FYI, the same logic was applied for VA02 as well and the logic is written in userexit "USEREXIT_FIELD_MODIFICATION" which is working fine.
Apprecriate your quick response.
Thanks
Dharma

Hi Raj,
Usually we use function module CRM_STATUS_UPDATE to
change user status in document. But if you want to
trigger next process or change from certain user status to next status interactively by the system, you can
use Badi CRM_ORDER_STATUS (here you have after and before
method).
Hope this could help.
Rgds,
Gun.

Changed file viewing settings for Guest account, now iMac won't boot :(

I'll start this off by mentioning that I'm not really a techie type person, but I'll do my best to describe what I did as accurately as possible. And I'm pretty good at following layman's terms troubleshooint advice!
I recently decided to move my iMac into the living room of my apartment. I have never found the need to create a Guest account, but I figured it might be convenient for..well, a guest every now and then. But when I created the guest account I discovered very quickly that they would have access to all of my photos, documents, movies, etc. via the "view all documents" "view all photos" tabs on the left-hand side of the Finder window. I googled what to do and people were saying that it is best to change the viewing options of particular folders via the "get info" tab when you right-click on a folder. There were three categories, the first one I believe was Admin or the main user, the second is "wheel" and the third says "Everyone". I changed the "Everyone" access on the folders I wanted private from read-writable to "none". I left the "wheel" and "admin" categories alone. I also did this to the utilities folder, and the library under the assumption it would only affect guest access to these files, not admin access!
Also, under the Account Preferences tab in the Apple menu I disabled the viewing of shared folders for the guest. I also disabled automatic login.
Next thing I know, while I'm under the guest login trying to test out my security updates, I see I can't click on anything! Or open anything! I can't open the finder at all, I can't open the internet, I can't even get to the Apple drop-down menu. I couldn't even log out of guest. I had to turn off my computer without shutting it down. I turned it back on, and it went through the motions of booting up until the blue screen with the grey dashed loading circle (no beach ball, thank god). It acts like it will proceed beyond that point, the grey circle disappears for a moment, but then nothing happens and that process starts over. Like it's stuck and can't find it's own files. I also notice a tiny white square in the upper left-hand corner of the blue screen if that means anything.
I don't know what the heck I did. I think I somehow managed to block my own admin access (is that even possible??).
-Shayna

You need to get the install discs, erase the hard drive, and reinstall all the software from scratch. When acquiring a used Mac there's no way to know what condition its software is in... there might be hacks, security holes, pirated software, keyloggers, credit card sniffers, or other even riskier stuff on it. Using a pre-owned Mac's software as-is is a Very High Security Risk. Your Mac's software is obviously distressed. What's more, you are not licensed to use any Apple software unless you own and are in possession of the install discs.
Get the discs and reinstall. Apple will send you new ones that match your model for a small shipping fee. Call them and provide your Mac's serial number.

Enable logging for SSH

Hi
I am trying to enable logging for SSH. Using sun 5.9. The SSH was preinstalled.
The logging should be able to track who logs in, time and ip address. Is it possible to also track what each user has done?
Any help would be appreciated.
Thanks
Darren

No, auth.debug would not help.
As far as I know, theres no facility in ssh to track what happens in an ssh session.
Just the logins.
I theory you can change the users shell into something logs the session.
Possibly something scripted with the "script" command.
But it would be non trivial.

How to change the view criteria at run time for af:query

Hi,
I've a usecase where I need to change the view criteria of the af:query at run time.
Use case:
=======
1) Consider a check box (Show Emps Under Dept 10) in the query panel when user selects and clicks 'Search' button should show the employees under dept 10. If user searches without selecting the check box, the results should show all the employees in all the departments.
2) I need to have a check box always in the query panel. Its mandatory.
The way I implemented:
==============
1) Created a transient variable 'Show Emps Under Dept 10' in the EmployeeVO and also created a bind variable bind_DeptNo.
2) Create a view criteria 'AllEmployees' which has only the transient attribute as the view criteria item and whose value set to 'false' by default.
3) Created another view criteria 'EmpUnderDept' which has 'DepartmentId' as the view criteria item and whose value set to the bind variable 'bind_DeptNo'.
4) Dropped the view criteria 'EmpUnderDept' as the 'af:query' panel in the jspx page.
5) Overridden the queryListener as '#{EmpBean.empSearch}'
6) Has the below code in the empSearch method as below. When user selects the check box, applying the other criteria 'EmpUnderDept' and setting the bind variable to '10'.
public void empSearch(QueryEvent queryEvent) {
// Add event code here...
QueryDescriptor queryDesc = (QueryDescriptor) queryEvent.getDescriptor();
ConjunctionCriterion conCrit = queryDesc.getConjunctionCriterion();
List<Criterion> criterionList = conCrit.getCriterionList();
List criterionValues = new ArrayList();
Object criteriaValue = null;
int criteriaNo = 0;
DCBindingContainer bc = (DCBindingContainer)BindingContext.getCurrent().getCurrentBindingsEntry();
FacesContext facesContext = FacesContext.getCurrentInstance();
for (Criterion criterion : criterionList) {
AttributeDescriptor attrDescriptor = ((AttributeCriterion)criterion).getAttribute();
System.out.println("============== attrDescriptor.getName() =================== " + attrDescriptor.getName());
criteriaValue = ((AttributeCriterion)criterion).getValues().get(0);
if(criteriaNo==0) {
Boolean val = (Boolean) ((AttributeCriterion)criterion).getValues().get(0);
if (val.equals(true)) {
OperationBinding method = (OperationBinding) ADFUtil.findOperation("ExecuteWithParams");
if(method!=null) {
Map params = method.getParamsMap();
//params.put(key, value)
method.getParamsMap().put("bind_DeptId", 10L);
method.execute();
ADFUtil.invokeMethodExpression( "#{bindings.EmpUnderDeptCriteiaQuery.processQuery}", queryEvent);
} else {
//ADFUtil.invokeEL("#{bindings.ExecuteWithParams.execute}");
ADFUtil.invokeMethodExpression( "#{bindings.AllEmployeesCriteriaQuery.processQuery}", queryEvent);
But this approach is not working and its always showing all the employees in all the departments.
Please let me know if there is a way to change the view criteria at run time depending on the values set at run time for one of the view criteria items.
JDev version am using is '11.1.1.5'
Thanks,
Lakshman

Hi Shay,
It worked for me without overriding the executeQuery() method in the ViewImpl.java.
Instead of creating 2 view criteria, I created only one which has both transient variable and the DepartmentId = <bind_DeptId>. With the above code, it worked properly. Now I am using only one view criteria.
Thank you.

Table for the report RPUAUD00 Logged Changes in Infotype data

Hi
I have a query with the program RPUAUD00 Logged changes in Infotype Data. In which table stores the details of the program RPUAUD00. for example in the 1st period there is a LWP record for the employee. If in the 2nd period the LWP entered in 1st period has deleted, in the log the LWP displays for 1st period new field contents, Action Indicator I. The deleted information displayes in Old field contents with the Action Indicator D. We want to know in which table the LWP insert and LWP delete (d) details are stored.
This information required to create a report for ESI. In the report No of days (payroll processed for) has to mention. To know the no of days need to access the report RPUAUD00. From the RPUAUD00 the details of LWP insert and delete can be known.
Request to help in solving the issue
Thanks & Regards
EKP Yadav

Hello:
Logged changes in Infotype Data are stored in cluster table PCL4 ID LA and SA for employee and LB and SB for applicant. Maybe L is for longterm and S for shorterm
Cheers.
Antoine

Finder views change for all windows

After playing around with Snow Leopard for just a few days, I noticed that when I change a view type in any Finder window, that view is applied to all windows. Is this by design? With Tiger, you could specify the view for "this folder only" or "all folders"

Joe - I've been heavily researching this issue. I've received some helpful advice from baltow, but here is how I fixed my problem. While in Best Buy over the weekend, I played on one of their Macs running Leopard 10.5.8 to see if the problem started before Snow Leopard. It did, wasn't just me. Then I found this site:
http://www.macintouch.com/leopard/faq.html#finder
It said: *Why don't my window view settings stick?* The Leopard Finder's approach to consistency is to use the last view you selected in any Finder window for all new Finder windows. You can override this on a per-folder basis; go to the menu View > Show View Options (or press Command-J). This opens a view options Inspector (a mini-window much like a traditional Palette window); at the top of this window, check the "Always open in" box to force the folder always to show the current view.
This is what was throwing me off - I thought that Always open in box was a global setting, not on an individual folder basis. With Tiger, you had two options: This window only, All windows.
Now I will play with the Arrange By setting and see if that works as well.

How to change the parameter 'Default Servers To Use For Viewing And Modification' using java api dynamically.

Hi,
I need to change the Crystal Reports setting 'Default Servers To Use For Viewing And Modification' to a particular server.this i need to do using java api.
could you pls provide me the sample code for this.
Regards
Srinivas

The IReport interface extends IViewingServerGroupInfo interface, that allows you to specify the server group.
The choice selection for that interface is as follows: 0 = first available, 1 = prefer the selected server group, and 2 = only use the selected server group.
The server group selection is by the SI_ID for that server group InfoObject.
Sincerely,
Ted Ueda - Developer Support

When I do a search for a particular song in the iTunes store, how can I change the view for the results?

I have the latest version of iTunes. Today I did a search for a particular song. In the past, I used to get a list of the song and the various artists who recorded it, and I could click the little arrow and play a preview of that song before I decided to buy it. Today the results didn't display that way - instead, I got a page with probably 50 or 100 songs all spread out across the page, and the "writing" was all overlayed so you couldn't quite tell what you're supposed to see! I want to go back to the "list" view but couldn't find anywhere to change the view preference. Any idea how?

Do a malware check with some malware scan programs.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of the database before doing a scan.<br />
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and [[Searches are redirected to another site]]
There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Next Generation Java Plug-in 1.6.0_16 for Mozilla browsers
Update the [[Java]] plugin to the latest version.
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)

To enable Log Changes For Views

Similar Messages

Maybe you are looking for