The selected log is not prepared for viewing error

Hello,
this is literally my first day using signal express and up to now everything went fine recording voltage from accelerometer and an impact hammer. Without me changing any parameters as far as I remember I now get the errror 'the selected log is not prepared for viewing. Once recording has completed you must right-click on the log and select Make log viewable before viewing it'
Apart from the fact that there is no such option on the log (only the option of Show Value by right clicking)
I went to Tools--> Options--->Logging and made sure that the prepare log data for viewing is on the 'during logging' option.
I then changed that to 'after logging complete' to see if the error stops but nothing yet.
Any help would be appreciated

Hi,
turns out the problem was linked with not having enough space on the server were I saved the logs...when I deleted some previous work to make up space everything worked just fine. Problem solved, thank you for your interest.

Similar Messages

User exit to update the incompletion log in sales order for pricing error

Hi experts,
I have to check the some mandotory pricing conditions in sales order, if that conditions are not exist in sales order then i need to show the information message as well as i need to update it in incompletion log of sales order. (incopletion log we can see on menu bar 'EDIT' or ctrl+F8 on main screen of VA01). So that user can save the sales order but it will be in incomplete status.
I have completed it upto showing the information message using user exit 'MV45AFZZ', but after this i don't know how to update it in incompletion log of sales order for pricing. I tried to update in tables VBUK-UVPRS, but i am not getting the desired result.
Please anyone can tell me how to update it. In which user exit i can update the incompletion log.
Thanks and Regards,
Vicky.

Hi Vinod,
I am sending you my code please check it,
   if TKOMK-SPART = 10.
    if XKOMV is not INITIAL.
      clear v_JEXP.
    READ TABLE XKOMV with key kschl = 'JEXP'.
    if sy-subrc = 0.
      check XKOMV-kwert = 0.
      message i003(ZT) with 'Value should not be 0 for conditioin type JEXP'.
      v_JEXP = 'X'.
    else.
      message i003(ZT) with 'Maintain the mandatory Conditioin type JEXP'.
      v_JEXP = 'X'.
    endif.
    if v_JEXP = 'X'.
XVBUV-MANDT = sy-mandt.
XVBUV-POSNR = '000010'.
XVBUV-TBNAM = 'VBAP'.
XVBUV-FDNAM = 'PRSOK'.
XVBUV-FEHGR = 20.
XVBUV-STATG = '06'.
XVBUV-FCODE = 'PKON'.
XVBUV-SORTF = 9999.
XVBUV-LFDNR = 0000.
XVBUV-UPDKZ = 'I'.
append XVBUV.
    endif.
endif.
endif.
Please suggest something to solve this.
Thanks and Regards,
Vicky.

DNS: The selected log file does not exist

Hi to all,
I am using Lion Server on a Mac Mini and everything seems to work fine. However, when I want to check my DNS log file (Server Admin > DNS > Log) I get a message that "The selected log file does not exist"! Stopping and starting the DNS service doesn't help. Anyone any idee how to view the log file within the Server Admin app?
Thanks in advance!
Ewald.

hi John!
if you have time, patience, and squared balls (just for laugh! ):
Use "strace" to trace all system calls a binary make... System calls like "open" file and "close" file =)
That's say, we are going to "trace the files opened by specific application".
"Strace" in MacOSX comes with Developer Tools, so you'll need to install these to continue.
First you have to know which are the Applications in the game, because "Server Admin" is a client-server application, there will be a client application in the client machine, and a server application running in the server.
You have to trace the server application running in the server. It will be the one which opens the log file, and sends the data to the client application.
I've made some previous investigation about the Server Admin Log parser (see https://discussions.apple.com/thread/3352647?start=0&tstart=0).
Also will be helpfull to read a little bit about strace ( http://linux.die.net/man/1/strace )
Here i do my bet, maybe that command line is what you look for:
#sudo strace launchctl load -w /System/Library/LaunchDaemons/com.apple.ServerPerfLog.plist | grep "open"
sudo: do as super user
strace: trace the binary
launchctl: system service
load -w file: load, as defined in this file
| grep open: and substract just the "open file" traces
Let me know if that gives you more clues!
regards, T

The selected driver is not applicable to any supported platforms. 2012 R2 U1 for Windows 8.1 x64

When trying to import the drivers from the Windows 8.1 x64 Dell E6330 SCCM CAB to our SCCM 2012 R2 U1 server, we receive the error "The selected driver is not applicable to any supported platforms" on a number of drivers.
Specifying the same source directory to the test Windows 8.1 Ent x64 computer via the install driver wizard in Device manager finds and installs the missing drivers successfully (Bluetooth 4.0 Module and STMicroelectronics 3-axis Digital Accelerometer).
The manufacturer section of those drivers looks like this:
bcbturms-win8x64-brcm.inf
[Manufacturer]
%MfgName%=Broadcom, NTamd64.6.3, NTamd64
st_accel.inf
[Manufacturer]
%STM%=ST,NTAMD64
Any idea how I can successfully import these drivers?

Thanks for the suggestion, but the results are the same. The Grabber runs without error, but the injector errors with "Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error." So I attempted to import the drivers from the
injector's configured drivers source folder and received the exact same error I receive when attempting to import them from the Dell cab.
Relavent part of the DirverInjector log below:
<![LOG[Starting drivers import processs]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.IntegrateDrivers" context="" type="1" thread="" file=""
<![LOG[Current folder : Bluetooth]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Current subfolder : Dell Wireless 380 Bluetooth 4.0 Module]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[INF file found : oem14.inf]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Driver version found : 12.0.0.7820]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Checking driver existence]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:20.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
<![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
<![LOG[Checking driver existence]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""
<![LOG[Error in ConfigMgrDriverInjector.CheckIfDriverExists The SMS Provider reported an error.]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.CheckIfDriverExists" context="" type="3" thread="" file=""
<![LOG[Driver not foud, a problem occurred during the import process]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="2" thread="" file=""
<![LOG[End of driver is import process]LOG]!><time="9:50:21.000+000" date="7-16-2014" component="ConfigMgrDriverInjector.ImportDrivers" context="" type="1" thread="" file=""

Getting error while opening a saved for later notification: The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action.

Hi All,
While opening a saved for later notification, we are getting "The selected action is not available. The cause may be related to security. Contact your system administrator to verify your permission level for this action". error.
This is a custom notification.
Please help.
Thanks
Raghava

HI All,
Please help on this issue.
Thanks
Raghava

The plug-in for the selected item is not installed on your system

Hello,
When I want to build an application there is a "!" mark before the application and for the Installer, in the Project Explorer under Build Specification.
When I ask for "explain warning" I got the message "The plug-in for the selected item is not installed on your system"
Previously it worked well, whats happend?? (during my holyday's )
Thanks for help, Huub

Well, something obviously changed. Install any software and/or hardware recently? Using any hardware in your LabVIEW project? Could be the drivers for that hardware got corrupted. Try identifying what you're using and reinstall the drivers.

VBAI - LabView interface error - "The selected inspection could not be loaded", "Inspection File Error"

I have been programming/interfacing VBAI2012 and LV2011 for two years already.
There is one very frustrating problem:
- Sometimes after changing some codes in VBAI, and I switch to Inspection Interface (by clicking File->Switch to Inspection Interface), there would be error saying "The selected inspection could not be loaded"
- and then there is NO WAY to know what is going on. It does not tell you where the error is. Its so frustrating, you changed a couple of things, and the you have error switching to Inspection Interface, but then you don't know what is causing the error.
Is there any log file which I can check?

Guys,
I have resolved this issue and successfully installed and configured jive forums on my laptop.
I have documented high level steps on my blog http://orafusionmiddleware.blogspot.com (Non revenue generating, only for knowledge sharing)
Cheers,
Sandeep

BDT-DC is not prepared for this application object

Hi,
I am getting this the error message:
BDT-DC is not prepared for this application object
when I try to create an extension.
I cam across the following thread:
EEWB
In this thread it is given:
Hi,
The xdcflag in the table TBZ1 needs to be set.
Please follow the steps mentioned below.
1. Start the transaction SM30.
2. Enter the name of the Table/View as V_TBZ1_DC.
3. Press the 'Maintain' button.
4. Double click on the Application Object you are trying to extend(for
e.g., BUPA)
5. Mark the checkbox 'Active in DC' under the section 'BDT DC Settings'.
6. Save the data.
You can refer to note 955236.
When i follow the above steps it says that:
Do not make any changes (SAP entry).
Please Guide.
Regards
Shilpi

Hi Smita,
I am unable to start the wizard.When i choose Start Wizard I get this error message and the wizard is not started.
Regards
Shilpi

Issue when installing SQL Server Express 2012 - "The requested control is not valid for this service" + "Could not find the database engine startup handle"

Good morning,
I'm experiencing the following issue when installing Microsoft SQL Server Express 2012 (with tools, SQLEXPRWT_x86_ENU.exe) on the laptop of my company;
Installation goes plain until around the end of the progress bar, it stops on the setup of
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
I've put in my SkyDrive the error log I received after the install;
I'm at full disposal if you need further information,
thank you in advance
Best regards
Francesco

Well, i just ran into this issue and the problem was lack of admin rights. It was my company's laptop so got the setup initiated by my company's IT team with admin rights. However, the upon completion of setup, i go the same error messages as stated above:
SqlEngineDBStartConfigAction_install_configrc_Cpu32
giving 7-8 times, even pressing "Cancel", the message "The requested control is not valid for this service";
After this, I receive one last message ""Could not find the database engine startup handle", then installation ends with failures, in particular the Database Engine and the Server Replication failed to be installed.
Also, if you open SQL Server Configuration, the status of the service is "Change Pending" and you would not be able to set the startup login type to Local Service/System/Network.
Then, I just got my account added as Local Admin and then tried to start the service and was able to.
However, I am not sure whether same was the case for you.
Please mark the answer as helpful if i have answered your query. Thanks and Regards, Kartar Rana

Error "The serial number is not valid for this product" | Creative Suite

HI together,
I'm very annoyed about the fact that I payed for Adobe Creative Suite Production Premium 5 (EDU version) and now I'm not able to use it on my new Mac. The Support team (Chat) from Adobe told me several times that the product/serial or whatever was canceled but this doesn't help me to get the product working and I won't pay again for this software. So what's the reason for cancellation? I can't see reasons for this and I don't understand why Support team can't help me. Already found Error "The serial number is not valid for this product" | Creative Suite but this doesn't helped me.
Regards
René

Maybe this is also useful... They told me I canceld this by myself which is not the truth. I had a Windows machine and used Creative Cloud as well but I only canceld the Cloud, not my Serial Number for Production Premium...
So who is able to reactivate my Serial Number so that I'm able to use my product?
info: Thank you for your patience.
While you wait, you can try our community forums where experts are available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: We are still assisting other customers, thank you for your patience. You can also try our community forums, available 24 hours a day, 7 days a week.
info: You are now chatting with Richa.
Richa: Hello! Welcome to Adobe Customer Service.
Richa: Sorry for any inconvenience this has caused
Richa: May I get the serial number?
Richa: Are we still connected?
Richa: We have not heard from you for some time. Do you wish to continue to chat?
Richa: Are we still connected?
Rene Pardon: hi
Rene Pardon: for sure
Rene Pardon: sorry, i took so much time for your answer that i decided to do anything else at this time
Rene Pardon: <Deleted >
Rene Pardon: i registered for the education version of production premium 5
info: Your chat transcript will be sent to r*@*.de at the end of your chat.
Richa: ok let me check
Richa: please wait
Richa: Thanks for your patinece
Rene Pardon: do you also need my "authorization code" for this product?
Richa: I need to transfer the chat to
Richa: tech rteam
Richa: please wait
Rene Pardon: ok
Richa: I am sorry
Richa: But I will not be able to transfer the chat
Rene Pardon: is there a phone number i can call?
Richa: As the serial number is canceldd
Richa: and we do apologise
Rene Pardon: why was it canceled?
Richa: but there is no phone support for this product
Rene Pardon: i don't understand because i payed a lot for this
Richa: Its showing canceled
Rene Pardon: so what are the options?
Rene Pardon: i need this product right now and i payed for it so why can't i use it?
Rene Pardon: Your file '2015-03-30_Personalausweis_*.pdf' was successfully uploaded.
Rene Pardon: as you can see, i'm the person who payed for this software
Richa: I am sorry I just checked it
Richa: it is canceled thats why you are getting invalid error
Rene Pardon: yeah, that's what i see but i dont understan. why was it canceled? who is responsible for this mistake? it doesn't help me to tell me what i already see i need a solution to use the product
Richa: I am sorry Rene
Richa: But its showing canceld
Richa: so cant help you with that
Richa: I wish I could help you, but my hands are tied
Rene Pardon: that's what you told me several times so who can help me?
Rene Pardon: i'm very annoyed about this fact that i can't use the software i payed for and noone is able to help me getting this working
Rene Pardon: so please tell me who is able to help me
Richa: You need to place a new order?
Rene Pardon: no, i won't pay AGAIN for this software i want a solution to use my already payed product
Rene Pardon: please get someone in your team who can help me
Richa: I am sorry Rene..
Richa: But unfortunately my team can not help you on this.. as the sersil is expired
Richa: I mean canceled
Richa: Sorry but we can not help Rene..
Rene Pardon: BUT WHY CAN'T YOU TELL ME WHY IT WAS CANCELED?
Rene Pardon: Help me understanding...
Rene Pardon: You're wasting my time!
Richa: I am sorry
Richa: I found the reason for cacnellation
Richa: and its canceldd
Richa: because you requested to cancel. in year 2013
Richa: On 30th april 2013
Rene Pardon: but i only canceled the creative cloud, not my creative suite
Richa: so we have refund and canceled it
Richa: Its showing for this oserial?
Rene Pardon: one moment
Rene Pardon: i log into my account
Rene Pardon: Your file 'Bildschirmfoto 2015-04-09 um 13.31.53.png' was successfully uploaded.
Rene Pardon: As you can see the product is displayed as "non-canceled"
Rene Pardon: I also bought the Createive Cloud during my time I had a Windows machine and this was the one i canceled - or I expected only this to get canceled
Richa: I am sorry but the refund was given and requested for this
Rene Pardon: There was only a refund for the Creative Cloud but not for the Creative Suite i bought
Rene Pardon: And why should I need a serial number for the Creative Cloud?
Rene Pardon: Please reactivate my Serial Number so that I'm able to use my product
Richa: I can not do that?
Rene Pardon: But i guess someone in your Team can
Richa: can not help you

The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg

Hi,
I am getting bellow error when i am running my application. I am using JDeveloper 11.1.2.3
<Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
<Nov 6, 2013 9:52:57 AM AST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
<BC4JConfigLifeCycleCallBack> <contextInitialized> MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
oracle.mds.exception.MDSRuntimeException: MDS-01702: The method getBean() is not valid for metadata object /ex/model/remittance/client/common/bc4j.xcfg - it is allowed on only bean metadata objects.
at oracle.mds.core.MetadataObject.getBean(MetadataObject.java:327)
at oracle.adf.share.jndi.MDSBackingStore.getMOBean(MDSBackingStore.java:558)
at oracle.bc4j.mbean.RuntimeMXBeanImpl.init(RuntimeMXBeanImpl.java:120)
at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:110)
at oracle.bc4j.mbean.RuntimeMXBeanImpl.<init>(RuntimeMXBeanImpl.java:101)
at oracle.bc4j.mbean.BC4JConfigLifeCycleCallBack.contextInitialized(BC4JConfigLifeCycleCallBack.java:114)
at weblogic.servlet.internal.EventsManager$FireContextListenerAction.run(EventsManager.java:481)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
at weblogic.servlet.internal.EventsManager.notifyContextCreatedEvent(EventsManager.java:181)
at weblogic.servlet.internal.WebAppServletContext.preloadResources(WebAppServletContext.java:1872)
at weblogic.servlet.internal.WebAppServletContext.start(WebAppServletContext.java:3153)
at weblogic.servlet.internal.WebAppModule.startContexts(WebAppModule.java:1508)
at weblogic.servlet.internal.WebAppModule.start(WebAppModule.java:482)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.ScopedModuleDriver.start(ScopedModuleDriver.java:200)
at weblogic.application.internal.flow.ModuleListenerInvoker.start(ModuleListenerInvoker.java:247)
at weblogic.application.internal.flow.ModuleStateDriver$3.next(ModuleStateDriver.java:425)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.flow.ModuleStateDriver.start(ModuleStateDriver.java:119)
at weblogic.application.internal.flow.StartModulesFlow.activate(StartModulesFlow.java:27)
at weblogic.application.internal.BaseDeployment$2.next(BaseDeployment.java:636)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:52)
at weblogic.application.internal.BaseDeployment.activate(BaseDeployment.java:205)
at weblogic.application.internal.EarDeployment.activate(EarDeployment.java:58)
at weblogic.application.internal.DeploymentStateChecker.activate(DeploymentStateChecker.java:161)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.activate(AppContainerInvoker.java:79)
at weblogic.deploy.internal.targetserver.BasicDeployment.activate(BasicDeployment.java:184)
at weblogic.deploy.internal.targetserver.BasicDeployment.activateFromServerLifecycle(BasicDeployment.java:361)
at weblogic.management.deploy.internal.DeploymentAdapter$1.doActivate(DeploymentAdapter.java:51)
at weblogic.management.deploy.internal.DeploymentAdapter.activate(DeploymentAdapter.java:200)
at weblogic.management.deploy.internal.AppTransition$2.transitionApp(AppTransition.java:30)
at weblogic.management.deploy.internal.ConfiguredDeployments.transitionApps(ConfiguredDeployments.java:240)
at weblogic.management.deploy.internal.ConfiguredDeployments.activate(ConfiguredDeployments.java:169)
at weblogic.management.deploy.internal.ConfiguredDeployments.deploy(ConfiguredDeployments.java:123)
at weblogic.management.deploy.internal.DeploymentServerService.resume(DeploymentServerService.java:180)
at weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
<Nov 6, 2013 9:53:11 AM AST> <Notice> <LoggingService> <BEA-320400> <The log file C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain\servers\DefaultServer\logs\DefaultDomain.log will be rotated. Reop
I seen oracle docs solution
MDS-01702: The method getBean() is not valid for metadata object {0} - it is allowed on only bean metadata objects.
Cause: An attempt was made to access the metadata object using the bean API but the metadata object was not a bean metadata object. The schema for the root element may not have been registered with MDS, or the beans were not available on the classpath.
Action: Regenerate the beans from the schema definitions and ensure that the correct versions are on the classpath. Check that the schemas are registered with the MDS instance.
Level: 1
Type: ERROR
Impact: Configuration
But i am not getting what i do in my application for removing this error.
Maroof

Do you use MDS in your application?
It's possible that you see a leftover of an earlier deployment.
Do you get the same error if you only start the integrated server (application server navigator->integrated server->debug or run)?
IF you don't get it when you only start the server without running your application, the problem is somewhere in your app. If you get the error it's probably an old deployment or a configuration error of your server. In this case stop jdev, rename the DefaultDomain folder C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\DefaultDomain tp C:\Users\maroof\AppData\Roaming\JDeveloper\system11.1.2.3.39.62.76.1\xxxDefaultDomain and start jdev again. Then use hte application server navigator to create a new integrated server (you should see this option as the DefaultDomain folder is not present) and once the new integrated server is created test again.
Timo

The connection was denied because the user account is not authorized for remote login

Using Terminal Server 2008 not able to get non administrator users to login to the remote desktop. Have tried from Windows server 2008 and from Windows servers 2003. Get error login in "The connection was denied because the user account is not authorized for remote login" from Windows Server 2008. Error "The requested session access is denied" from Windows Server 2000.

Is that seriously the only way to do this? Doesn't this render the "Allow log on through Terminal Services" GP Setting useless?
I would like to know this answer, as well. I have created a new AD group for my assistant admins called "Domain Admins (limited)". I have added this group to the GP setting "Allow log on through Terminal Services", but the
assistant admins cannot log in through RDP. It 'feels like' this is all I would need to do.
Craig
Found some good info
here. There are really two things required for a user to connect to a server via RDP. You can configure one of them via Group Policy but not the other.
1) Allow log on through Terminal Services can be configured through Group Policy, no problem.
2) Permissions on the RDP-listener must also be granted. If your user is a member of the local Administrators group or the local Remote Desktop Users group then this is handled. If you are trying to utilize a new, custom group (as I am),
then there isn't a way to do this via group policy (that I have found).
EDIT: Found the answer. I am creating a blog post to outline the steps. They aren't hard, but they're not self-explanatory. It deals with the Restricted Groups mentioned above, but it's still automate-able using Group Policy so that you
don't have to touch each computer. I think the above poster (Andrey Ganev) got it right, but
I had trouble deciphering his instructions.
Here is my blog post that walks through this entire process, step-by-step.

The value 1 is not allowed for the field variace key

Hi experts,
When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
Thanks & Regards,
Ravi.

Hi
Can u tell me the field name . I cant get that field ref key. In which view does it come.
Reg
Raja

The selected wizard could not be started Reason:org/eclipse/jdt/core/IJava

Hi
i am a newbie to Eclipse plugin , i have used org.eclipse.jdt.core package classes(IJavaElement,ICompliationUnit)
for my developement . In Standalone ( as a Eclipse application ) My code is working its generating required java files
I export my plugin project and created a plugin folder. And copied the folder into eclipse/plugins folder
Now if i open the Wizard. wizard opens with a alert saying
" The selected wizard could not be started Reason:org/eclipse/jdt/core/IJavaElement "
what will be problem
i am using eclipse3.1 and JDK 5.0
plugin.xml i have used the follwing requires tag
<requires>
<import plugin="org.eclipse.ui"/>
<import plugin="org.eclipse.core.runtime"/>
<import plugin="org.eclipse.core.resources"/>
<import plugin="org.eclipse.ui.ide"/>
     <import plugin = "org.eclipse.jdt.ui"/>
     <import plugin = "org.eclipse.jdt.core"/>
     <import plugin = "org.eclipse.jdt.launching"/>
     <import plugin = "org.eclipse.jdt.debug"/>
</requires>
Regards
Ganesan S

Please disregard. Reinstalling seems to have solved this
issue.

F400917: The current configuration is not valid for this feature. This feature cannot be used until you correct the configuration.

Hello,
We recently changed to TFS as our bug tracking system and trying to understand how to change the existing states of Bug\Add new states. We installed TFS 2013 Update 4 and followed below process to change state values. For example, I would like to change
Bug State value of "Done" to "Closed",
1. witadmin exportwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /n:Bug /f:C:\TFS\bug.xml
2. Replace all values of "Done" to Closed
3. witadmin importwitd /collection:"http://MyServer:8080/tfs/DefaultCollection" /p:MyProject /f:C:\TFS\bug.xml
Then we see below error in Work -> Backlog
TF400917: The current configuration is not valid for this feature. This feature cannot be used until you correct the configuration.
Learn about how to correct your configuration
Details about the validation error appear below:
The following element contains an error: RequirementBacklog/States. TF401098: This element defines the states for work items that appear on your backlog. The state configuration is incorrect. Each work item on this backlog must have one state with the type
'Complete'. The following work item type does not have any state with the type 'Complete': Bug.
The following element contains an error: BugWorkItems/BugWorkItems. TF400506: This element defines the states for work items that represent Bugs or Defects. Each state must exist in at least one of the work item types that are defined in: BugWorkItems.
The following states do not exist in any of the work item types: Done.
Tried export, made changes to ProcessConfig file for Bug states and imported. Still same issue.
Please suggest on how to proceed with customization of Bug states\values in TFS 2013 Update 4
Thanks,
Aswini

Hi Aswini,
Thanks for your reply.
I tested in on my Scrum 2013.4 team project, and found we need edit two places in processconfiguration.xml file, please try below:
<BugWorkItems category="Microsoft.BugCategory" pluralName="Bugs" singularName="Bug">
    <States>
      <State type="Proposed" value="New" />
      <State type="Proposed" value="Approved" />
      <State type="InProgress" value="Committed" />
      <State type="Complete" value="Closed" />
    </States>
</BugWorkItems>
<RequirementBacklog category="Microsoft.RequirementCategory" parent="Microsoft.FeatureCategory" pluralName="Backlog items" singularName="Backlog item">
    <AddPanel>
      <Fields>
<Field refname="System.Title" />
      </Fields>
    </AddPanel>
    <Columns>
      <Column width="100" refname="System.WorkItemType" />
      <Column width="400" refname="System.Title" />
      <Column width="100" refname="System.State" />
      <Column width="50" refname="Microsoft.VSTS.Scheduling.Effort" />
      <Column width="200" refname="System.IterationPath" />
      <Column width="200" refname="System.Tags" />
    </Columns>
    <States>
      <State type="Proposed" value="New" />
      <State type="Proposed" value="Approved" />
      <State type="InProgress" value="Committed" />
      <State type="Complete" value="Closed" />
      <State type="Complete" value="Done" />
    </States>
</RequirementBacklog>
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

The selected log is not prepared for viewing error

Similar Messages

Maybe you are looking for