To make Three row values in a single row

Hi,
Below is the Table Format i have.
Here for the first Mail_ID i have 3 mail addresses.similarly for second ID too.
I want First three rows to be in a single row.and so on...
Plz help in doing this.
Thanks 
Deepa

Deepa,
Check if this helps.. Does dynamic conersion of data to columns ..
--Your Email table
create table #temp (mailid int,to_mail varchar(100))
insert #temp select 1,'[email protected]'
insert #temp select 1,'[email protected]'
insert #temp select 1,'[email protected]'
insert #temp select 2,'[email protected]'
insert #temp select 2,'[email protected]'
insert #temp select 3,'[email protected]'
--Constructing a temp table to hold data with row_numbers
select *,row_number() over(partition by mailid order by to_mail) as rn
into #t
from #temp
--declaration of variables
declare @n int,@list varchar(max),@sql nvarchar(max)
set @n=(select max(rn) from #t)
--Population of list to form the dynamic query
;with cte
as
select cast(',[email1]' as varchar(max)) as ch,1 as num
UNION ALL
select cast(ch+',[email'+cast((num+1) as varchar(100))+']' as varchar(max)) as ch,num+1 as num
from cte where num<@n
select top 1 @list=stuff(ch,1,1,'')
from cte
order by num desc
--Formulating the complete dynamic query
set @sql='
select mailid,'+@list+'
from
select mailid,to_mail,''email''+cast(rn as varchar) as emailnum from #t
) tab
PIVOT
max(to_mail) for emailnum in ('+@list+')
) pvt'
exec sp_executesql @sql
--clean up
drop table #t
Thanks,
Jay
<If the post was helpful mark as 'Helpful' and if the post answered your query, mark as 'Answered'>

Similar Messages

  • Display values of a single field in a multiple rows in a table region

    Hi Tech-Gurus,
    I want to display values of a single field ( which is in a table region) in multiple rows and also need to restrict the values from decimal number. If i click save, then it will throw exception "Decimal not allowed".
    xxxxxx
    yyyyyy
    Reg.No
    1234
    5678
    7654
    I need to display the values of REG.NO in different rows like,
    1234
    5678
    7654
    and also need to validate as well against Decimal values.
    Please help me with the code how i will iterate ?

    Hi,
    I am assuming you are talking about displaying substrings from the Reg No in different rows. For this you would need to write a query which identifies the substrings and creates a separate row for each (ensure you choose values for all other columns in the table row). Kindly let me know if the understanding is incorrect.
    To validate against decimal value you can use the java code by checking the difference of the number and the number on which modulus has been applied. Hope that helps.
    Regards
    Sumit

  • How to get the maximum/largest value in a single row?

    I have a simple Pivot table view with dollars as the measure, months on the columns and accounts on the rows.  I want to highlight the month that had the largest value.  E.g. so if the dollar values for account Revenue are 10 for Jan, 11 for Feb, 50 for Mar and 0 for the rest of the months, then I want to highlight the cell with 50 green. So essentially I need to be able to identify the max value in a row in the pivot table. 
    If I add a max calculation, it returns the top value across all columns and rows. A Rank calculation also returns rankings across all columns and rows. How can I determine the largest value in a single row?
    Thanks
    J

    In general you have to go by level based measures. Just tweak it as max(revenue by Year)
    Just do it in Criteria tab and see how it works and I thing rest you know how to do

  • How to refer a column value of a single row in conditional column display?

    Hello,
    does anybody have an idea, how i can refer a column value of a single row in conditional display of a column?
    So my idea is, that a report has a column, which value is only displayed, when another column value of this row has a specific value.
    I want to solve this problem with condition type: PL/SQL Function Body returning a boolean.
    But I do not know how to refer the column value of each single row!
    Thank you,
    Tim

    Here's a solution that, to me, seems easier to implement but, that's, of course, in the eye of the implementer.
    Rather than using APEX to generate a link column for you, actually create the link as part of your SQL.
    select '<a href="f?p=102:3:491847682940364::::P3_CONTACT_ID:' || CONTACT_ID || "><img src="/i/themes/theme_1/ed-item.gif" alt="Edit"></a>' CONTACT_LINK, ...
    etc.
    Test this out. You'll see that it works just like making a column a link using the column attributes.
    Next, we'll change the SQL to use a DECODE statement to either display the link or nothing depending on what your criteria is. For example, let's assume you only want a link for active contacts.
    select Decode( CONTACT_STATUS, 'A', '<a href="f?p=102:3:491847682940364::::P3_CONTACT_ID:' || CONTACT_ID || "><img src="/i/themes/theme_1/ed-item.gif" alt="Edit"></a>', NULL ) CONTACT_LINK, ...
    etc.
    This will not display the link in any rows in which the CONTACT_STATUS is not active, i.e. "A"
    -Joe

  • How to make a row non-editable depending on a db column value

    HI,
    I've an editable report region and the requirement is to make the row non-editable according to the value in one of the column. Like if the value for that column is null the row should be editable else non-editable. Any option to do this in Oracle APEX.
    Regards,
    Prasanth

    I assume you are using a tabular form. In that case, you would have to run a loop in Javascript to read all the rows in the Form. The example is given below. You can use Firebug in Firefox to identify your field names and replace f02, f03 and f04 with your field names.
    <script language="JavaScript" type="text/javascript">
    function f_readonly_items(){
    for (i=0;i<document.wwv_flow.length;i++)
    if (document.wwv_flow.f02.value) != Null
    document.wwv_flow.f02[i].readOnly = true;
    document.wwv_flow.f03[i].readOnly = true;
    document.wwv_flow.f04[i].readOnly = true;
    </script>
    Hope this helps.

  • How to Print the same field value in a single row

    Hi,
    I need to print the same field values in a single row
    For Examble
    in a table TestTable
    ID Name Value
    1 AB 120
    1 BC 150
    1 CD 130
    2 AB 111
    2 BC 112
    2 CD 113
    I need the query like if the Name contains BC and CD then i need to print like ID, BC Value, CD Value as below
    ID BC'Value CD'Value
    1 150 130
    2 112 113
    Kindly suggest me...
    Thanks in Advance
    Anu

    Hi,
    Since you're on 9i some available functionality unfortunatly isn't at your disposal.
    This should work, however, using your sample data:
    MHO%xe> create table t as ( -- generating sample data:
      2  select 1 cid, 'AB' cname, 120 cvalue from dual union all
      3  select 1, 'BC', 150 from dual union all
      4  select 1, 'CD', 130 from dual union all
      5  select 2, 'AB', 111 from dual union all
      6  select 2, 'BC', 112 from dual union all
      7  select 2, 'CD', 113 from dual
      8  );
    Tabel is aangemaakt.
    MHO%xe> select cid
      2  ,      max(decode(cname, 'BC', cvalue, null)) BC_value
      3  ,      max(decode(cname, 'CD', cvalue, null)) CD_value
      4  from   t
      5  group by cid;
           CID   BC_VALUE   CD_VALUE
             1        150        130
             2        112        113For reference and future challenges, see:
    http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:419593546543
    http://www.oracle-base.com/articles/10g/StringAggregationTechniques.php

  • Multiple values in a single cell in report !!

    Hello,
    I want to display multiple values in a single cell, each value separated by comma.
    Ex: I have Employee and Department.
    If a employee works for many departments, all the Department names should be displayed in the same cell in the report.
    Please help !

    Thanks for your replies !
    Is there any other way to achieve this ?
    There is 1 InfoObject which has 2 fields Employee and Department.
    Employee     Department
    001                A
    001                B
    001                C
    In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
    Can this be done in the backend through a ABAP code?

  • Library Filters: Filter for multiple values in a single column and Wildcards

    If you have a multi-value column in a library, can you filter to show only results where two (or more) specific values (terms) are applied? E.g. Year 2014 and Month January? Seems this would be particularly useful for Enterprise Keywords columns.
    Similarly, is there any way to filter on one value OR another value in a single column (e.g. Document Type Memo OR Fax)?
    Any way to use wildcards in searches (would be REALLY useful in the Title and Name columns when naming conventions have been followed).
    I'm guessing the answer is going to be 'move to SharePoint 2013' - if that is the case, please confirm whether all the scenarios mentioned above are catered for.

    Thanks for your replies !
    Is there any other way to achieve this ?
    There is 1 InfoObject which has 2 fields Employee and Department.
    Employee     Department
    001                A
    001                B
    001                C
    In the report there should be 1 row for Employee 001 with all the Departments displayed in the same cell separated by commas.
    Can this be done in the backend through a ABAP code?

  • How to allow multiple values in a single blank cell in WebI report

    Hi
             I am working in BO XIR2. I have a scenario as follows.
    In a single cell (blank cell from template) i need to display multiple contact persons. When I drag the contact person name into the blank cell, I am getting an error: MULTIVALUE). Please let me know how to use a function so that I can show two or three contact person names in a single blank cell.
    I tried to use Replace and Char function as follows to bring Carriage Return functionality to the cell.
    Replace([Contact Person]; ";" ; Char(13)) but this did not work.
    Thanks in Advance.

    BOUser11:
    I know this thread has been answered. I recently came across a scenario where I happen to populate multiple values in a single blank cell(from templates). But the only catch being that if user enters multiple values for a prompt you can show them in a single cell eg: =UserResponse("Enter value(s) for Branch:"). would be the formula for the blank cell. Afetr the user selects three values say A, B,C, webi puts it in the format of A;B;C. in a single cell.
    In your case try giving that as a prompt to the user or answer that multi prompt some how and when u use the above formula it should suffice your requirement.
    Let me know if you have tried.
    Thanks,
    karthik

  • Consolidating three rows into one

    Hello,
    I am struggling to figure this out and my googling hasn't quite led me to what I need. I have found some ideas such as sys_connect_by_path but I want to convert my three rows into columns (using one row), not concatenate them. I can not quite find the right thing or work it out. The code below gives me the columns I want but I can not figure out how to consolidate it onto one row. When I uncomment the group by line it doesn't like it as the role and emp fields are not group expressions. The values I wish to pivot are strings and not numbers (role).
    Would anybody be kind enough to help?? my brain has frozen!! :D
    Thanks very much
    Jon
    With t As
             Select 25840 id, 'Bob' emp, 'Primary' role  From dual Union All
             Select 25840, 'Jim', 'Secondary' From dual Union All
             Select 25840, 'Dave', 'Tertiary' From dual
        Select
        id
        ,decode(role,'Primary',emp) Prim
        ,decode(role,'Secondary',emp) Sec
        ,decode(role,'Tertiary',emp) Ter
        From
        t
        --group by id

    You just need to add a MAX and uncomment the GROUP BY
    SQL> ed
    Wrote file afiedt.buf
      1  With t As
      2           (
      3            Select 25840 id, 'Bob' emp, 'Primary' role  From dual Union All
      4            Select 25840, 'Jim', 'Secondary' From dual Union All
      5            Select 25840, 'Dave', 'Tertiary' From dual
      6           )
      7   Select
      8      id
      9      ,max(decode(role,'Primary',emp)) Prim
    10      ,max(decode(role,'Secondary',emp)) Sec
    11      ,max(decode(role,'Tertiary',emp)) Ter
    12    From t
    13*  group by id
    SQL> /
            ID PRIM SEC  TER
         25840 Bob  Jim  DavePersonally, I'd use a CASE rather than a DECODE, but that doesn't matter much.
    Justin

  • Retrieving ALL values from a single restricted user property

    How can I retrieve ALL values of a single restricted user property from within
    a .jpf file?
    I want to display a dropdown list within a form in a JSP which should contain
    all the locations listed in the property 'locations'. I ever get just the default
    value when I access the property via
    ProfileWrapper pw = userprofile.getProfileForUser(user);
    Object prop = pw.getProperty("ClockSetup", "Locations");

    Well, the code you've got will retrieve the single value of the property
    for the current user. You're getting the default value because the
    current user doesn't have Locations property set, so the ProfileWrapper
    returns the default value from the property set.
    I assume you want to get the list of available values that you entered
    into the .usr file in Workshop. If so, I've attached a
    SetColorController.jpf, index.jsp, and GeneralInfo.usr (put in
    META-INF/data/userprofiles) I wrote for an example that does just this.
    It uses the PropertySetManagerControl to retrieve the restricted values
    for a property, and the jsp uses data-binding to create a list from that
    pageflow method.
    For a just-jsps solution, you can also use the
    <ps:getRestrictedPropertyValues/> tag. I've attached a setcolor-tags.jsp
    that does the same thing.
    Greg
    Dirk wrote:
    How can I retrieve ALL values of a single restricted user property from within
    a .jpf file?
    I want to display a dropdown list within a form in a JSP which should contain
    all the locations listed in the property 'locations'. I ever get just the default
    value when I access the property via
    ProfileWrapper pw = userprofile.getProfileForUser(user);
    Object prop = pw.getProperty("ClockSetup", "Locations");
    [att1.html]
    package users.setcolor;
    import com.bea.p13n.controls.exceptions.P13nControlException;
    import com.bea.p13n.property.PropertyDefinition;
    import com.bea.p13n.property.PropertySet;
    import com.bea.p13n.usermgmt.profile.ProfileWrapper;
    import com.bea.wlw.netui.pageflow.FormData;
    import com.bea.wlw.netui.pageflow.Forward;
    import com.bea.wlw.netui.pageflow.PageFlowController;
    import java.util.Collection;
    import java.util.Iterator;
    * @jpf:controller
    * @jpf:view-properties view-properties::
    * <!-- This data is auto-generated. Hand-editing this section is not recommended. -->
    * <view-properties>
    * <pageflow-object id="pageflow:/users/setcolor/SetColorController.jpf"/>
    * <pageflow-object id="action:begin.do">
    * <property value="80" name="x"/>
    * <property value="100" name="y"/>
    * </pageflow-object>
    * <pageflow-object id="action:setColor.do#users.setcolor.SetColorController.ColorFormBean">
    * <property value="240" name="x"/>
    * <property value="220" name="y"/>
    * </pageflow-object>
    * <pageflow-object id="action-call:@page:index.jsp@#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
    * <property value="240,240,240,240" name="elbowsX"/>
    * <property value="144,160,160,176" name="elbowsY"/>
    * <property value="South_1" name="fromPort"/>
    * <property value="North_1" name="toPort"/>
    * </pageflow-object>
    * <pageflow-object id="page:index.jsp">
    * <property value="240" name="x"/>
    * <property value="100" name="y"/>
    * </pageflow-object>
    * <pageflow-object id="forward:path#success#index.jsp#@action:begin.do@">
    * <property value="116,160,160,204" name="elbowsX"/>
    * <property value="92,92,92,92" name="elbowsY"/>
    * <property value="East_1" name="fromPort"/>
    * <property value="West_1" name="toPort"/>
    * <property value="success" name="label"/>
    * </pageflow-object>
    * <pageflow-object id="forward:path#success#begin.do#@action:setColor.do#users.setcolor.SetColorController.ColorFormBean@">
    * <property value="204,160,160,116" name="elbowsX"/>
    * <property value="201,201,103,103" name="elbowsY"/>
    * <property value="West_0" name="fromPort"/>
    * <property value="East_2" name="toPort"/>
    * <property value="success" name="label"/>
    * </pageflow-object>
    * <pageflow-object id="control:com.bea.p13n.controls.ejb.property.PropertySetManager#propSetMgr">
    * <property value="31" name="x"/>
    * <property value="34" name="y"/>
    * </pageflow-object>
    * <pageflow-object id="control:com.bea.p13n.controls.profile.UserProfileControl#profileControl">
    * <property value="37" name="x"/>
    * <property value="34" name="y"/>
    * </pageflow-object>
    * <pageflow-object id="formbeanprop:users.setcolor.SetColorController.ColorFormBean#color#java.lang.String"/>
    * <pageflow-object id="formbean:users.setcolor.SetColorController.ColorFormBean"/>
    * </view-properties>
    public class SetColorController extends PageFlowController
    * @common:control
    private com.bea.p13n.controls.ejb.property.PropertySetManager propSetMgr;
    * @common:control
    private com.bea.p13n.controls.profile.UserProfileControl profileControl;
    /** Cached possible colors from the User Profile Property Set definition.
    private String[] possibleColors = null;
    /** Get the possible colors, based upon the User Profile Property Set.
    public String[] getPossibleColors()
    if (possibleColors != null)
    return possibleColors;
    try
    PropertySet ps = propSetMgr.getPropertySet("USER", "GeneralInfo");
    PropertyDefinition pd = ps.getPropertyDefinition("FavoriteColor");
    Collection l = pd.getRestrictedValues();
    String[] s = new String[l.size()];
    Iterator it = l.iterator();
    for (int i = 0; it.hasNext(); i++)
    s[i] = it.next().toString();
    possibleColors = s;
    catch (P13nControlException ex)
    ex.printStackTrace();
    possibleColors = new String[0];
    return possibleColors;
    /** Get the user's favorite color from their profile.
    public String getUsersColor()
    try
    ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
    return profileControl.getProperty(profile, "GeneralInfo", "FavoriteColor").toString();
    catch (P13nControlException ex)
    ex.printStackTrace();
    return null;
    // Uncomment this declaration to access Global.app.
    // protected global.Global globalApp;
    // For an example of page flow exception handling see the example "catch" and "exception-handler"
    // annotations in {project}/WEB-INF/src/global/Global.app
    * This method represents the point of entry into the pageflow
    * @jpf:action
    * @jpf:forward name="success" path="index.jsp"
    protected Forward begin()
    return new Forward("success");
    * @jpf:action
    * @jpf:forward name="success" path="begin.do"
    protected Forward setColor(ColorFormBean form)
    // set the color in the user's profile
    try
    ProfileWrapper profile = profileControl.getProfileFromRequest(getRequest());
    profileControl.setProperty(profile, "GeneralInfo", "FavoriteColor", form.getColor());
    catch (P13nControlException ex)
    ex.printStackTrace();
    return new Forward("success");
    * FormData get and set methods may be overwritten by the Form Bean editor.
    public static class ColorFormBean extends FormData
    private String color;
    public void setColor(String color)
    this.color = color;
    public String getColor()
    return this.color;
    [GeneralInfo.usr]
    [att1.html]

  • Entering mulitple values for a single user parameter

    Hello,
    Can anyone explain to me how to allow multiple values for a single parameter?
    For example, say I want to allow the report to display a list of employees based on their employee id. I want to allow the user to enter mulitple
    employee id's into a single field to get their report. SO the user would enter "241, 459, 832" to return the list of those 3 employees. I have the SQL set up below, but obviously I need to set up something different to break it out into 3 separate values. Any help would be greatly appreciated!
    SELECT * FROM EMPLOYEE
    WHERE EMPLOYEE_ID IN (:P_EMP_ID)

    Hi,
    Another way to do this is to use the lexical parameter, but then you have to create the parameter form in Forms. Your SQL would look like this for example:
    select * from emp where empno is not null &empno
    where &empno is a lexical parameter.
    Then on your parameter form you would have a text field F_empid, say 200 character long, allowing the user to enter multiple values separated by a ",".
    Then in the trigger that calls the report you would create a parameter list, and a variable that holds the values read from the form, this variable is where you define the value to be passed to the report's lexical parameter. For example:
    declare
    v_empid varchar2(200); (consistent with the length of the lexical parameter in the report).
    begin
    v_empid:='and empno in ('||F_empid||')';
    then you pass v_empid to &empno in the call to the report.
    This method works well. Good luck.

  • Passing multiple values for a single field in URL to call sap Transaction

    Hi All,
    I need to pass multiple values for a single field to SAP transaction .
    means if i have say a field "Date" which can contain more than one value, <b>but its not a range which has two fields</b> . How is it possible.
    Let me know pls.
    Regards,
    Sirisha.R.S.

    Hi Satyajit,
    I need to call a transaction with multiple values which gives me the report based on those values.
    So I need to pass multiple values for a single parameter.
    I hope u got it.
    Regards,
    Sirisha.R.S.

  • Passing ALL values to a single parameter

    In Bi Publisher Report, I need to pass 'ALL' values to a single parameter
    Here is brief explanation about my requirement,
    I have 3 parameters
    Parameter A,
    Parameter B,
    Parameter C
    I have to pass ALL values to last parameter i.e; Parameter C and the rest should pass only single value, how should I do that?
    Any help would be greatly appreciated.
    Thank you

    Hi,
    have a look here: http://www.oracle.com/global/de/community/bip/tipps/dynamische_queries/index_en.html
    This might give you an idea how to work with multi-value parameters.
    Regards
    Rainer

  • Any way to pass Multiple Values for a single Label in the Parameter?

    I have a Report that Contains 2 Parameters, @Customer & @Area. When trying to set up the Available Values for @Area, I'm having issues using multiple values for one Label, i.e. = "4006" Or "4610"
    One of the Filters in the Report is an Operation number, which is the [OPERATION] field, which is setup as a filter on the Tablix referencing the @Area parameter. 
    PROBLEM: I cannot retrieve any data when trying to use the ‘Or’ Operator here. If I simply put “4006” or “4610” I retrieve data, but when trying to combine it returns no data.
    Example, I need to allow a user to select ‘Chassis Incoming’, which would include data from Operations 4006 & 4610.
    QUESTION:
    Any way to pass Multiple Values for a single Label in the Parameter?
    I realize the typical solution may be to use ‘Multi-Value’ selection, but in this case we want the User to select the Area and the multiple values for Filtering will be automatically determined for them. Otherwise, they are subject to not getting
    it correct.
    I have tried several different ways, such as =”4006” Or “4610”, =(“4006”, “4610”), = In(“4006”, “4610”), etc….
    Note: We are using Report Builder 3.0

    Based on my experience, there's no way to 'intercept' the query that gets passed back to SQL Server, so a Split wouldn't work.
    Try creating either a function or stored procedure using the code below (compliments to
    http://www.dotnetspider.com/resources/4680-Parse-comma-separated-string-SQL.aspx) to parse the string: 
    CREATE FUNCTION dbo.Parse(@Array VARCHAR(1000), @Separator VARCHAR(10))
    RETURNS @ResultTable TABLE (ParseValue VARCHAR(100))AS
    BEGIN
    DECLARE @SeparatorPosition INT
    DECLARE @ArrayValue VARCHAR(1000)
    SET @Array = @Array + @Separator
    WHILE PATINDEX('%' + @Separator + '%' , @Array) <> 0
    BEGIN
    SELECT @SeparatorPosition = PATINDEX('%' + @Separator + '%', @Array)
    SELECT @ArrayValue = LEFT(@Array, @SeparatorPosition - 1)
    INSERT @ResultTable VALUES (CAST(@ArrayValue AS VARCHAR))
    SELECT @Array = STUFF(@Array, 1, @SeparatorPosition, '')
    END
    RETURN
    END
    Once created you can do things like this:
    SELECT * FROM Parse('John,Bill,David,Thomas', ',')
    SELECT * FROM (SELECT 'John' AS TestName union select 'David' AS TestName) AS Main
    WHERE TestName IN (SELECT ParseValue FROM dbo.Parse('John,Bill,David,Thomas', ','))
    This is what your SQL query would probably look like:
    SELECT OperationID, OperationName FROM dbo.Operations
    WHERE AreaID IN (SELECT ParseValue FROM dbo.Parse(@Area, ','))
    You may need to fiddle around with the Separator depending on whether SQL Server inserts a space between the comma and next value.

Maybe you are looking for

  • What is the best way to back up itunes library

    I have my imac time machine program set to back up my computer every day to an external hard drive. I recently updated itunes and I lost some of my songs. I tried to find them in time machine but I couldn't find them. itunes support was good and I wa

  • How to hide filename extensions Bridge Web Gallery

    HI, I am creating several web galleries using Bridge and I would like to display an individual title under each image to be seen when viewed in a browser. I am aware that you can switch the display of individual image filenames on and off in some gal

  • How to include the Pipe symbol ("|") in the column heading.

    Hi , Can somebody advice how to include the Pipe symbol ("|") in the column heading. Regards, Yagne

  • HTML5 Player still not working properly on Win 8.1 N

    Hello. I am writing here because firefox still doesnt work properly on 8.1 N version, and since it's happening for several months already... Maybe you don't even know about it ? :O So the problem is that I can't play mp3 content uploaded to eg. SOUND

  • SP2-0310 trying to upgrade PL/SQL Web Toolkit on 10g XE

    Hi, I upgraded my local Oracle 10g XE APEX installation to version 4.0.2.00.06 but then I realized that I probably also needed a newer version of the PL/SQL Web Toolkit. So I changed my path to the owa folder and then I executed owainst.sql connected