To merge data in 1 internal table

Hi Abap gurus,
I have some probolem during merging data in internal table . I have four inernal tables and I want to merge data in one final internlal table. Is there any way of doing that without using nested loop ?
It is urgent .

Use the APPEND LINES statement.
APPEND LINES OF: itab1 to final_itab,
itab2 to final_itab,
itab3 to final_itab. ...

Similar Messages

SAP Query Display data from 2 internal tables

Hi ABAP Gurus,
I am developing a SAP Query.
I have created an infoset with the custom infotype 9050 and added the table ZPA9050 into the Infoset.
How do I input values to the ZPA9050 fields? A checkbox for making a Selection field is not available in the Query (SQ01)
For every pa9050 entry there exist multiple records of ZPA9050. I need to display the pa9050 fields in the 1st row and the corresponding zpa9050 fields in the subsequent rows.
Kindly advise how to accomplish this task.
A quick reply is highly appreciated.
Useful answers will be rewarded.
Thanks
Sriram

Hi Deepika,
Your reqirement is to print data from the two internal tables ..and if u r not using interactive alv then u need to merge data into single internal table... if anycase u dont want to merge in the table itab as u told u can use another final internal table in which u can merge data from the two previous interal tables then u pass this final internal table to ur FM.
Thanks & Regards
Ashu Singh

Populate data in dynamic internal table

Hi ppl,
I have a requirement where I need to display certain fields in the report output.
The output contains 8 fixed fields (common for all rows in output) and some dynamic fields (number of column varies with rows) which will be determined at runtime.
I am able to create the dunamic internal table....and at runtime I see the fields created in the internal table correctly.
Now my requirement is to fill this table with the data from 2 internal tables.
The values for the 8 common fields comes from the internal table t_output and the values for dynamic fields come from t_dynamic.
Please let me know the logic to merge these 2 internal tables into the dynamic internal table <dyn_table>.
Regards.

Hello David,
This has been discussed many times before in this forum. Since the table structure is dynamic the fields are determined at runtime.
To assign data to this table you have to use [ASSIGN COMPONENT ... |http://help.sap.com/abapdocu_70/en/ABAPASSIGN_MEM_AREA_DYNAMIC_DOBJ.htm#!ABAP_ALTERNATIVE_4@4@] variant.
Please refer to the example provided in the documentation for details.
BR,
Suhas

Moving the data from multiple internal tables into a single one

Hello everyone,
I am creating a classical report which uses the following tables.
tables : ekko, ekpo, mara, makt,lfa1.
my input parameter is
Select-options Purchase Order number
Following fields are getting used.
Doc no                  EKKO-EBELN
Material              EKPO-MATNR
Item number          EKPO-EBELP
Quantity             EKPO-MENGE
Material Group          MARA-MATKL
Vendor                  EKKO-LIFNR
Old Material code   MARA-BISMT
Material Desc.           MAKT-MAKTX
Vendor name         LFA1-NAME1
Now i need to do the following task.
1 Select record from EKKO Using document number.
2 Select record from EKPO using EKKO record using Document no as key.
3 Find out Old Material code of each and every material from Material master.
4 Find out Material description for each and every material from MAKT.
5 Sort record on Vendor, Purchase Order number and Material.
I have defined seperate internal tables for these operation.
Once i have fetched records into these individual internal tables from the corresponding DB tables i need to move these values into a new internal tables which has all the above fields mentioned
I need to move these values into a new internal table because to display the values on the report.
Any idea for the above ? Plz help with a sample example or some relevant.
Regards,
Ranjith Nambiar

Hi
1 Select record from EKKO Using document number.
2 Select record from EKPO using EKKO record using Document no as key.
Use inner join and retrive data into one internal table.for Ex ITAB1
3 Find out Old Material code of each and every material from Material master.
Use ITAB1 with for allentries in MARA table to get the onl materil number populate in to one table.
4 Find out Material description for each and every material from MAKT.
Get the Material desc with the same manner as above,
5 Sort record on Vendor, Purchase Order number and Material.
now sort the ITAB1 as you req.
now Loop on the ITAB1.
and read above 2 tables for old matnr and matner deac and append into another table as you want.
Hope this will help.
Regards,
Hiren Patel

How to read a table and transfer the data into an internal table?

Hello,
I try to read all the data from a table (all attribute values from a node) and to write these data into an internal table. Any idea how to do this?
Thanks for any help.

Hi,
Check this code.
Here i creates context one node i.e flights and attributes are from SFLIGHT table.
DATA: lo_nd_flights TYPE REF TO if_wd_context_node,
 lo_el_flights TYPE REF TO if_wd_context_element,
 ls_flights TYPE if_main=>element_flights,
 it_flights type if_main=>elements_flights.
navigate from <CONTEXT> to <FLIGHTS> via lead selection
lo_nd_flights = wd_context->get_child_node( 'FLIGHTS' ).
CALL METHOD LO_ND_FLIGHTS->GET_STATIC_ATTRIBUTES_TABLE
IMPORTING
 TABLE = it_flights.
now the table data will be in internal table it_flights.

Xml data to abap internal table

I'm presently working on a interface where data in abap internal table is converted into xml format and placed in the frontend and vice versa.
I'm through with the first part and in secodn part also I'm able to transfer the data from frontend to Document Object Model(DOM) by parsing but finally am not able to put it into an internal table.
Please help (Urgent).
Thanks and regards,
S.K.Tripathy

Hi sitakant,
1. itab --- > xml
   xml ---> itab.
2. This program will do both.
   (just copy paste in new program)
3.
REPORT abc.
DATA
DATA : t001 LIKE TABLE OF t001 WITH HEADER LINE.
DATA : BEGIN OF itab OCCURS 0,
a(100) TYPE c,
END OF itab.
DATA: xml_out TYPE string .
DATA : BEGIN OF upl OCCURS 0,
       f(255) TYPE c,
       END OF upl.
DATA: xmlupl TYPE string .
FIRST PHASE
FIRST PHASE
FIRST PHASE
Fetch Data
SELECT * FROM t001 INTO TABLE t001.
XML
CALL TRANSFORMATION ('ID')
SOURCE tab = t001[]
RESULT XML xml_out.
Convert to TABLE
CALL FUNCTION 'HR_EFI_CONVERT_STRING_TO_TABLE'
EXPORTING
    i_string         = xml_out
    i_tabline_length = 100
TABLES
    et_table         = itab.
Download
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
    filetype = 'BIN'
    filename = 'd:\xx.xml'
TABLES
    data_tab = itab.
SECOND PHASE
SECOND PHASE
SECOND PHASE
BREAK-POINT.
REFRESH t001.
CLEAR t001.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    filename = 'D:\XX.XML'
    filetype = 'BIN'
TABLES
    data_tab = upl.
LOOP AT upl.
CONCATENATE xmlupl upl-f INTO xmlupl.
ENDLOOP.
XML
CALL TRANSFORMATION ('ID')
SOURCE XML xmlupl
RESULT tab = t001[]
BREAK-POINT.
regards,
amit m.

How to get data from an internal table in some other program

I would like to get data from the internal table in the other program. When I using FM "LIST_FROM_MEMORY" to get the data, it doesn't work and the exception is not fount.
If any special code need in the other program, like write data to memory .
Many thx .
From Ross Wang

Hi
<li>You need to have interaction if you want to use EXPORT/IMPORT statments.
<li>The internal tables in both programs must be same
<li>Program one ..Calling program
REPORT ZTEST_NOTEPAD.
DATA: BEGIN OF it_t001 OCCURS 0,
 bukrs TYPE t001-bukrs,
 butxt TYPE t001-butxt,
 END OF it_t001.
START-OF-SELECTION.
SUBMIT ztest_notepad1 AND RETURN.
IMPORT it_t001 FROM MEMORY ID 'ZTEST_T100'.
LOOP AT it_t001.
 WRITE:/ it_t001.
ENDLOOP.
<li>Program two ...Called program
REPORT ztest_notepad1.
DATA: BEGIN OF it_t001 OCCURS 0,
 bukrs TYPE t001-bukrs,
 butxt TYPE t001-butxt,
 END OF it_t001.
START-OF-SELECTION.
SELECT * FROM t001 INTO CORRESPONDING FIELDS OF TABLE it_t001 UP TO 10 ROWS.
IF sy-dbcnt > 1.
 EXPORT it_t001 TO MEMORY ID 'ZTEST_T100'.
ENDIF.
I hope that it gets you some idea.
Thanks
Venkat.O

How to populate data into Dynamic Internal Table.

Hi Experts,
I had created one Dynamic Internal table and one static internal table.I want to move data from Static Internal table to Dynamic interal table.And aslo the number of coloum of these two tables are not same.
So please help me for solving this issue.
Thanks,
Seema.

Hi,
Check out this sample program for dynamictable report.
REPORT YMS_DYNAMICDEMO
 NO STANDARD PAGE HEADING
 MESSAGE-ID zcs_c2c_001.
type-pools : abap.
field-symbols: <dyn_table> type standard table,
 <dyn_wa>,
 <dyn_field>.
data: dy_table type ref to data,
 dy_line type ref to data,
 xfc type lvc_s_fcat,
 ifc type lvc_t_fcat.
selection-screen begin of block b1 with frame.
parameters: p_table(30) type c default 'T001'.
selection-screen end of block b1.
start-of-selection.
perform get_structure.
perform create_dynamic_itab.
perform get_data.
perform write_out.
form get_structure.
data : idetails type abap_compdescr_tab,
 xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
Get the structure of the table.
ref_table_des ?=
 cl_abap_typedescr=>describe_by_name( p_table ).
idetails[] = ref_table_des->components[].
loop at idetails into xdetails.
 clear xfc.
 xfc-fieldname = xdetails-name .
 xfc-datatype = xdetails-type_kind.
 xfc-intlen = xdetails-length.
 xfc-decimals = xdetails-decimals.
 append xfc to ifc.
endloop.
endform.
form create_dynamic_itab.
Create dynamic internal table and assign to FS
call method cl_alv_table_create=>create_dynamic_table
 exporting
 it_fieldcatalog = ifc
 importing
 ep_table = dy_table.
assign dy_table->* to <dyn_table>.
Create dynamic work area and assign to FS
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
endform.
form get_data.
Select Data from table.
select * into table <dyn_table>
 from (p_table).
endform.
form write_out.
Write out data from table.
loop at <dyn_table> into <dyn_wa>.
 do.
 assign component sy-index
 of structure <dyn_wa> to <dyn_field>.
 if sy-subrc <> 0.
 exit.
 endif.
 if sy-index = 1.
 write:/ <dyn_field>.
 else.
 write: <dyn_field>.
 endif.
 enddo.
endloop.
endform.
Thanks,
Shankar

How to copy data from one internal table to another

i am using some function module to get some data for my function module
and the retrieved data is not getting populated in mu fumctional module
i am sucessful in getting the data to an internal table in my function module but dont know how to pass it to my table parameter
thanks in advance

Hi Naval,
Declare an internal table of type table parameter structure and pass it the table parameters of the Function module.
Check the code for this function module.
DATA IT_MARA LIKE MARA OCCURS 0 WITH HEADER LINE.
SELECT * FROM MARA UP TO 10 ROWS INTO TABLE IT_MARA.
CALL FUNCTION 'GUI_DOWNLOAD'
 EXPORTING
 FILENAME = 'C:\TEST.TXT'. FILETYPE = 'ASC'
 WRITE_FIELD_SEPARATOR = 'X'
 TABLES
 DATA_TAB = IT_MARA
 EXCEPTIONS
 FILE_WRITE_ERROR = 1
 NO_BATCH = 2
 GUI_REFUSE_FILETRANSFER = 3
 INVALID_TYPE = 4
 NO_AUTHORITY = 5
 UNKNOWN_ERROR = 6
 HEADER_NOT_ALLOWED = 7
 SEPARATOR_NOT_ALLOWED = 8
 FILESIZE_NOT_ALLOWED = 9
 HEADER_TOO_LONG = 10
 DP_ERROR_CREATE = 11
 DP_ERROR_SEND = 12
 DP_ERROR_WRITE = 13
 UNKNOWN_DP_ERROR = 14
 ACCESS_DENIED = 15
 DP_OUT_OF_MEMORY = 16
 DISK_FULL = 17
 DP_TIMEOUT = 18
 FILE_NOT_FOUND = 19
 DATAPROVIDER_EXCEPTION = 20
 CONTROL_FLUSH_ERROR = 21
 OTHERS = 22.
IF SY-SUBRC <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
Thanks,
Vinay

How to insert data from different internal table into a data base table

hi all,
I want to insert a particular field in an internal table to a field in a data base table.Note that the fields in the internal table and database table are not of the same name since i need to insert data from different internal tables.can some one tell me how to do this?
in short i want to do something like the foll:
INSERT INTO ZMIS_CODES-CODE VALUE '1'.
*INSERT INTO ZMIS_CODES-COL1 VALUE DATA_MTD-AUFNR .(zmis_codes is the db table and data_mtd is the int.table)

REPORT ZINSERT.
tables kna1.
data: itab LIKE KNA1.
data lv_kUNAG LIKE KNA1-KUNNR.
lv_kuNAG = '0000010223'.
ITAB-kuNNR = lv_kuNAG.
ITAB-name1 = 'XYZ'.
INSERT INTO KNA1 VALUES ITAB.
IF SY-SUBRC = 0.
WRITE:/ 'SUCCESS'.
ELSE.
WRITE:/ 'FAILED'.
ENDIF.
Here lv_kunag is ref to kna1 kunnr passed in different name
In internal table .
Try and let me know if this logic dint work.

How to download data from an internal table to a text

Hi All,
I want to download data from an internal table to a text file.
The fields should be pipe(|) separated. I have tried GUI_DOWNLOAD but it is not taking the field separator.
The sample of the desired data that i require should be this way:-
13456TR|M|COUP|MATERIAL|KGS
Thanks in advance.
Regards
Satish.

Hi,
Try this..
REPORT zc1download message-id zc1dwnmsg.
*& Declaration Section for the Tables *
TABLES: makt.
*& Declaration Section for the Internal Tables
DATA: intab TYPE TABLE OF makt,
 wa_intab LIKE LINE OF intab,
 no_of_rec TYPE i,
 count TYPE i.
DATA: BEGIN OF f_intab,
 str(255) TYPE c,
 END OF f_intab.
DATA: t_intab LIKE TABLE OF f_intab,
 w_intab LIKE LINE OF t_intab,
 temp(255) TYPE c.
FIELD-SYMBOLS: <f> TYPE ANY.
*& Selection ScreenSection for the file download
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETERS: file TYPE rlgrap-filename MEMORY ID file,
 tab RADIOBUTTON GROUP rad1 DEFAULT 'X',
 others RADIOBUTTON GROUP rad1,
 delimit TYPE c.
SELECTION-SCREEN END OF BLOCK b1.
START-OF-SELECTION.
IF file IS INITIAL. " check to ensure file.
 MESSAGE i001.
 EXIT.
ENDIF.
IF others = 'X'. " check to ensure delimiter.
 IF delimit = ' '.
 MESSAGE i002.
 EXIT.
 ENDIF.
ENDIF.
SELECT * FROM makt INTO TABLE intab.
IF tab = 'X'. " default delimiter tab is used
 CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 filename = file
 filetype = 'DAT'
 mode = 'A'
 TABLES
 data_tab = intab
 EXCEPTIONS
 file_open_error = 1
 file_write_error = 2
 invalid_filesize = 3
 invalid_type = 4
 no_batch = 5
 unknown_error = 6
 invalid_table_width = 7
 gui_refuse_filetransfer = 8
 customer_error = 9
 no_authority = 10
 OTHERS = 11.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ELSE. " If user defind delimiter is to be used
 Counts the number of fields *
 DO.
 ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
 IF sy-subrc <> 0.
 EXIT.
 ELSE.
 count = count + 1.
 ENDIF.
 ENDDO.
 LOOP AT intab INTO wa_intab.
 DO count TIMES. " Adding the delimiter in required places
 ASSIGN COMPONENT sy-index OF STRUCTURE wa_intab TO <f>.
 CONCATENATE temp delimit <f> INTO temp.
 ENDDO.
 SHIFT temp.
 APPEND temp TO t_intab.
 CLEAR temp.
 ENDLOOP.
 CALL FUNCTION 'WS_DOWNLOAD'
 EXPORTING
 filename = file
 filetype = 'ASC'
 mode = 'A'
 TABLES
 data_tab = t_intab
 EXCEPTIONS
 file_open_error = 1
 file_write_error = 2
 invalid_filesize = 3
 invalid_type = 4
 no_batch = 5
 unknown_error = 6
 invalid_table_width = 7
 gui_refuse_filetransfer = 8
 customer_error = 9
 no_authority = 10
 OTHERS = 11.
 IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
 ENDIF.
ENDIF.
WRITE:/ 'The Data has been tranfered to :', file.
Cheers
Kathir!~

How to read data from an internal table into a real table?

Hello experts,
I'm relatively new to ABAP and I'm trying to figure out how to read data from an internal table into a table that I created. I'm trying to use the RRW3_GET_QUERY_VIEW_DATA function module to read data from a multiprovider. I'm trying to read data from the e_cell_data and e_axis_data tables into a table that I've already created. Please see code below.
TABLES MULTITAB.
DATA:
query_name TYPE RSZCOMPID,
s_cubename TYPE RSINFOPROV,
t_cell_data TYPE RRWS_T_CELL,
t_axis_data TYPE RRWS_THX_AXIS_DATA,
t_axis_info TYPE RRWS_THX_AXIS_INFO,
wa_t_cell_data like line of t_cell_data,
wa_t_axis_data like line of t_axis_data,
w_corp_tab like line of t_cell_data.
s_cubename = 'CORP_MPO1'.
query_name = 'Z_corp_test'.
 CALL FUNCTION 'RRW3_GET_QUERY_VIEW_DATA'
 EXPORTING
 i_infoprovider = s_cubename
 i_query = query_name
 i_t_parameter = query_string_tab
 IMPORTING
 e_cell_data = t_cell_data
 e_axis_data = t_axis_data
 e_axis_info = t_axis_info.
If anyone has any information to help me, I would greatly appreciate it. Thanks.

Hi,
<li>Once you call the function module RRW3_GET_QUERY_VIEW_DATA, lets say data is available in the corresponding tables e_cell_data e_axis_data which you have mentioned.
<li>Modify your internal table defined for other purpose, with data from e_cell_data e_axis_data like below.
LOOP AT t_cell_data INTO wa_t_cell_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_cell_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
LOOP AT t_axis_data INTO wa_t_axis_data.
"Get the required data from t_cell_data.
MOVE-CORRESPONDING wa_t_axis_data TO it_ur_tab.
"Modify your internal table wih data
MODIFY it_ur_tab TRANSPORTING <field1> <field2> <field3>.
ENDLOOP.
Thanks
Venkat.O

How to move data from 2 internal table to 1 internal table

Can any body send me code that how to move data from 2 internal table into one internal table.
Moderator message : Read ABAP documentation. Thread locked.
Edited by: Vinod Kumar on Jun 13, 2011 11:45 AM

Hi Mohdarif92;
I don't know your full needs. But general method should be as below code.
Please check exam below code.
Best regards.
data : begin of gt_result.
            ... like mkpf-...
            ... like mkpf-...
            ... like mseg-...
            ... like mseg-...
          end of gt_result
select *
into table gt_mkpf
from mkpf where ...
select *
into table mseg
from mseg where ...
loop at gt_mkpf.
     loop at gt_mseg where ... = mkpf-...
        move-corresponding gt_mkpf to gt_result.
        move-corresponding gt_mseg to gt_result.
        append gt_result
     endloop.
endloop.

How to select data from an internal table

material                          norm                    date last modified
B2-SP HEAT                 50.000               20090420
BF COKE                                 575.000               20090419
GROSS COKE                 200.000               20090419
B2-SP HEAT                 100.000               20090419
TWT                                 33.000               20090330
B7-SP HEAT                 2.000               20090310
B1-SP HEAT                 1.000               20090309
B7-SP HEAT                 615.000               20090308
B2-SP HEAT                 585.000               20090308
B1-SP HEAT                 100.000               20090308
B3-SP HEAT                 610.000               20090308
BF COKE                                 68.500               20090308
GROSS COKE                 72.600               20090308
B8-SP HEAT                 600.000               20090308
B9-SP HEAT                 625.000               20090308
BX-SP HEAT                 615.000               20090308
B9-SP HEAT                 58.000               20090307
B1-SP HEAT                 100.000               20090307
B6-SP HEAT                 350.000               20090306
B2-SP HEAT                 888.000               20090306
Like above there r numerous data in a table :
how will i select data into another internal table where material above is not repeated with latest modified date.please help.

Hi Sonu,
The main task is to move the contents of the one internal table to another with some condition.
First sort and delete the duplicate entries from the First Internal table like below :
sort it_tab by material ascending date_modified descending.
delete adjacent duplicates from it_tab.
Then move that Internal table contents to another internal table.
Define another internal table with the same structure as you have first internal table and then
Second Step :
it_itab1 = it_itab.
If you are using seperate Header line and Body then you can do like below :
       it_itab1[] = it_itab[].
This will fix the issue.
Please let me know if you need any further explonation.
Regards,
Kittu
Edited by: Kittu on Apr 24, 2009 12:21 PM

In ALV reports how can we capture separate data in 3 internal table

HI
In ALV reports how can we capture data in 3 Internal tables and combine them in another internal table to display........

Hello Sudhanshu
Another option would be to display all three itabs together which is a piece of cake using OO-based ALV lists. Please refer to thread
Re: Alv
for a sample report.
Regards
Uwe

To merge data in 1 internal table

Similar Messages

Maybe you are looking for