To Open 11g Forms output on a seperate popup window

Hi,
Anybody help me, how to Open 11g forms output on a seperate popup window. Now it is comming in browser itself.
regards
Ahamed Rafeeque CH

This is controlled in the Forms Services configuration. You will need to modify the "separateFrame" configuration setting using the WebLogic Server interface. You could also modify the formsweb.cfg using a standard text editor, but it is not recommended. The default value for separateFrame is FALSE. By setting the value to TRUE it instructs Forms Services to use a seperate browser window for the Java Applet.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Similar Messages

I'm using "window.open()" to show one Calendar in a popup window. I can see that the popup is re-sizable. How can I prevent the user from re-sizing the popup?

I'm using "window.open()" to show one Calendar in a popup window. I can see that the popup is re-sizable. How can I prevent the user from re-sizing the popup? I have tried "resizable=yes|no|1|0" and that seems to be not working.

You can't prevent users from resizing a pop-up.
*https://developer.mozilla.org/en-US/docs/Web/API/window.open

How to open a single WD Component in a popup window?

Hi,
I want to open a WD component in a popup window but don't know how. I have searched this forum without a result.
The following situation:
DC1 (main DC) with a button to open the popup
DC2 (popup DC)
How can I open DC2 in a popup window without destroying DC1 in a way like
if (!DC1.hasActiveComponent()) {
mainR_Usage.createComponent("my.comp.DC2","my.comp/comp~DC2~wd");
and of course how can I destroy the DC2-popup from DC1?
The general problem is not to open a popup window inside DC1. The problem is to open DC2 as a popup!
Thanks ahead

Hi Bernd,
You can try this:
1.Create a context attribute of the type IWDWindow in your view/Component Controller of DC2, say 'PopupWindow'
2.Create a method in your DC2, say
openPopup()
IWDWindowInfo winInfo = (IWDWindowInfo)wdComponentAPI.getComponentInfo().findInWindows("DC2Window");
       IWDWindow popup= (IWDWindow)wdComponentAPI.getWindowManager().createModalWindow(winInfo);
       wdContext.currentPopupElement().setPopupAttribute(popup);
       popup.setTitle("Hello, this is DC2");
       popup.setWindowSize(600,500);
       popup.setWindowPosition(100,100);
       popup.show();
                       +// Save WindowIsnstance in Context
     wdContext.currentContextElement().setPopUpWindow(window);+
3.Expose this method in your Interface controller so that it is available to be called by DC1
4.in your DC1 you can call this method
      if((!DC1.hasActiveComponent())
     wdThis.wdGetDC2ComponentUsage().createComponent();
     wdThis.wdGetDC2Interface().openPopup();
5.This should open the popup window from DC2.
6. You can have a close button or any other event on the view contained in this window itself. On click of this button you can retrive the window instance stored in the context and destroy it.
e.g we have an action assigned to a Close button. this will be in the view from the window you are trying to open as a popup.
onActionCloseWindow()
         IWDWindow window = wdContext.currentContextElement().getPopUpWindow();
         window.destroyInstance();
this should close yourr popup window.
Regards,
Ajay
Edited by: Ajay Patil on Jul 6, 2010 10:27 PM

Want to open a abstract portal component in a popup window

i have created two abstract portal components and corresponding jsp files, say a.jsp and b.jsp in a project.
i have written a javascript "OpenNewWindow" in a.jsp. and i am calling it when user clicks on a link to b.jsp
i have used window.open() function in that script. and i hae passed <project name>.<component name> as parameter to the function.
the output opens a new window with all, masthead, toolarea and b.jsp. <u>But i want only b.jsp to popup, without masthead and toolarea.</u>
can you please help me out?

Hi Jack,
Try this in your script,
window.showModalDialog(component, 'warning', 'dialogHeight: 190px; dialogWidth:
439px; edge: Raised; center: Yes; help: No; resizable: No; status: No');
Component is the name of your component...
Regs,
jaga

Popup window not opening in IE 6.0, SP1

Hi Friends,
Whats the version information for Popup windows to open.
Not able to view the popup window on Internet Explorer 6.0 , build 2800.1106, SP1.
It gives Runtime Error.
I can see the popup windows in IE6.0.2900.2180, SP2
any clue?
Thanks.
Message was edited by: Nav

Naveen,
Normally the browser should support the javascript version you are using. The best way is to upgrade the browser to higher SP if it runs on a different SP.
Usually, Javascript erros are very abstract, so tough to handle. So, got to be careful when coding.
Check this link for details on Javascript erros etc
http://www.irt.org/script/general.htm
Hope this helps,
Kumar

Error in opening the PDF file created from the smart form output.

Hi All,
i have a simple smart form which takes 3 values like customer no, name and no of times customer called and gives an out like
Customer 0001000000 with name Ravi called 5 times today.
I have to send this output to mail as an attachment.
for this i am coding as below.
******Call the SSF Function module
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = Form name
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
fm_name = lv_fmname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3
lv_partner_number = '0001000000'.
lv_name_org1 = 'Ravi'.
lv_z_no_calls_day = '5'.
lw_ctrlop-getotf = 'X'.
lw_ctrlop-no_dialog = 'X'.
lw_compop-tdnoprev = 'X'.
lw_compop-tddest = 'LP01'.
*******Call the Form Function module and get the OTF of form output
CALL FUNCTION lv_fmname
EXPORTING
name_org1 = lv_name_org1
partner_number = lv_partner_number
z_no_calls_day = lv_z_no_calls_day
control_parameters = lw_ctrlop
output_options = lw_compop
user_settings = ' '
IMPORTING
job_output_info = w_return
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
i_otf] = w_return-otfdata[.
*********Now here if i look in to the OTF data i got in debug it has the data i aniticipated along with some other data.
the output is in the format
TDPRINTCOM(2) TDPRINTPAR(70)
ST XXXX.. customer 0001000000 with
name.....
i have my data in the above format spread in three lines of the output otf table where XXXX... is some number.
***********To convert to PDF Format
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
format = 'PDF'
max_linewidth = 132
IMPORTING
bin_filesize = lv_len_in
BIN_FILE =
TABLES
otf = i_otf
lines = i_tline
EXCEPTIONS
err_max_linewidth = 1
err_format = 2
err_conv_not_possible = 3
err_bad_otf = 4
OTHERS = 5
*********For testing purpose i created a file on the desktop with the the data in i_tline. it created PDF file but when i tried to open it it's giving an error.
i_objtxt = 'test with pdf-Attachment!'.
APPEND i_objtxt.
DESCRIBE TABLE i_objtxt LINES v_lines_txt.
READ TABLE i_objtxt INDEX v_lines_txt.
wa_doc_chng-obj_name = 'Smart Form'.
wa_doc_chng-obj_descr = 'Frequent Caller Alert_Day'.
wa_doc_chng-doc_size = ( v_lines_txt - 1 ) * 255 + STRLEN( i_objtxt ).
*********Creating the Entry for the document
CLEAR i_objpack-transf_bin.
i_objpack-head_start = 1.
i_objpack-head_num = 0.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_txt.
i_objpack-doc_type = 'RAW'.
APPEND i_objpack.
i_objbin] = i_tline[.
DESCRIBE TABLE i_objbin LINES v_lines_bin.
READ TABLE i_objbin INDEX v_lines_bin.
i_objhead = 'Frequentcaller list_Day.pdf'.
APPEND i_objhead.
************Creating the entry for the attachment.
CLEAR : i_objpack.
i_objpack-transf_bin = 'X'.
i_objpack-head_start = 1.
i_objpack-head_num = 1.
i_objpack-body_start = 1.
i_objpack-body_num = v_lines_bin.
i_objpack-doc_type = 'PDF'.
i_objpack-obj_name = 'ATTACHMENT'.
i_objpack-obj_descr = 'FCA'.
i_objpack-doc_size = v_lines_bin * 255 .
APPEND i_objpack.
CLEAR i_reclist.
i_reclist-receiver = 'mail id'.
i_reclist-rec_type = 'U'.
APPEND i_reclist.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
document_data = wa_doc_chng
put_in_outbox = 'X'
commit_work = 'X'
TABLES
packing_list = i_objpack
object_header = i_objhead
contents_bin = i_objbin
contents_txt = i_objtxt
receivers = i_reclist
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
operation_no_authorization = 4
OTHERS = 99.
This is all i am doing.
It is sending a mail with the attachment but we are not able to open the attachment. it's giving an error like file is damaged and couldn't be repaired.
I serched in the forum but i couldn't get the answer.
I suspect there is a problem in getting the OTF data..
Please help me in resolving this issue....
Thanks in advance.
RK

Check the sample , and see where you made the mistake.
REPORT ZPDF_MAIl.
DATA:
w_fm_name      TYPE rs38l_fnam,
w_bin_filesize TYPE i,
w_filesize     TYPE i,
w_lines_txt    TYPE i,
w_lines_bin    TYPE i.
DATA:
wa_ctrlop   TYPE ssfctrlop,
wa_outopt   TYPE ssfcompop,
wa_objhead TYPE soli_tab,
wa_buffer   TYPE string,
wa_doc_chng TYPE sodocchgi1.
DATA:
BEGIN OF t_mail_ids OCCURS 0,
    mailid TYPE ad_smtpadr,
END OF t_mail_ids,
t_otfdata TYPE ssfcrescl,
t_otf TYPE itcoo OCCURS 0 WITH HEADER LINE,
t_pdf_tab TYPE tline OCCURS 0 WITH HEADER LINE,
t_objpack LIKE sopcklsti1 OCCURS 0 WITH HEADER LINE,
t_objtxt LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_objbin LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_record LIKE solisti1 OCCURS 0 WITH HEADER LINE,
t_reclist LIKE somlreci1 OCCURS 0 WITH HEADER LINE.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
    formname           = 'Z195_TEST'
IMPORTING
    fm_name            = w_fm_name
EXCEPTIONS
    no_form            = 1
    no_function_module = 2
    OTHERS             = 3.
IF sy-subrc EQ 0.
ENDIF.                               " IF sy-subrc EQ 0.
wa_ctrlop-getotf = 'X'.
wa_ctrlop-no_dialog = 'X'.
wa_outopt-tdnoprev = 'X'.
CALL FUNCTION w_fm_name
EXPORTING
    control_parameters = wa_ctrlop
    output_options     = wa_outopt
    user_settings      = 'X'
IMPORTING
    job_output_info    = t_otfdata
EXCEPTIONS
    formatting_error   = 1
    internal_error     = 2
    send_error         = 3
    user_canceled      = 4
    OTHERS             = 5.
IF sy-subrc EQ 0.
ENDIF.                               " IF sy-subrc EQ 0.
t_otf[] = t_otfdata-otfdata[].
CALL FUNCTION 'CONVERT_OTF'
EXPORTING
    format                = 'PDF'
    max_linewidth         = 132
IMPORTING
    bin_filesize          = w_bin_filesize
TABLES
    otf                   = t_otf
    lines                 = t_pdf_tab
EXCEPTIONS
    err_max_linewidth     = 1
    err_format            = 2
    err_conv_not_possible = 3
    err_bad_otf           = 4
    OTHERS                = 5.
IF sy-subrc EQ 0.
ENDIF.                               " IF sy-subrc EQ 0.
LOOP AT t_pdf_tab.
TRANSLATE t_pdf_tab USING '~'.
CONCATENATE wa_buffer t_pdf_tab INTO wa_buffer.
ENDLOOP.
TRANSLATE wa_buffer USING '~'.
DO.
t_record = wa_buffer.
APPEND t_record.
SHIFT wa_buffer LEFT BY 255 PLACES.
IF wa_buffer IS INITIAL.
    EXIT.
ENDIF.
ENDDO.
t_objtxt = ' To Change the COR, Use the Transaction ZCOR_CHANGE'.
APPEND t_objtxt.
t_objtxt = ' Check the Attached PDF file for COR'.
APPEND t_objtxt.
DESCRIBE TABLE t_objtxt LINES w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
READ TABLE t_objtxt INDEX w_lines_txt.
wa_doc_chng-obj_name = 'COR Display'.
wa_doc_chng-expiry_dat = sy-datum + 10.
CONCATENATE 'COR' "w_cornr
            '-' "w_stat_descr w_action_desc
       INTO wa_doc_chng-obj_descr SEPARATED BY space.
wa_doc_chng-sensitivty = 'F'.
wa_doc_chng-doc_size = w_lines_txt * 255.
CLEAR t_objpack-transf_bin.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
t_objpack-body_num = w_lines_txt.
t_objpack-doc_type = 'RAW'.
APPEND t_objpack.
t_objpack-transf_bin = 'X'.
t_objpack-head_start = 1.
t_objpack-head_start = 1.
t_objpack-head_num = 0.
t_objpack-body_start = 1.
DESCRIBE TABLE t_objbin LINES w_lines_bin.
READ TABLE t_objbin INDEX w_lines_bin.
t_objpack-doc_size = w_lines_bin * 255 .
t_objpack-body_num = w_lines_bin.
t_objpack-doc_type = 'PDF'.
t_objpack-obj_name = 'COR'.
t_objpack-obj_descr = 'COR Test'.
* concatenate 'COR' w_cornr into t_objpack-obj_descr
*                           separated by space.
APPEND t_objpack.
*LOOP AT t_mail_ids.
CLEAR t_reclist.
t_reclist-receiver = 'INTENATEMAIL'.
t_reclist-rec_type = 'U'.
APPEND t_reclist.
*ENDLOOP.
CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
EXPORTING
    document_data              = wa_doc_chng
    put_in_outbox              = 'X'
    commit_work                = 'X'
TABLES
    packing_list               = t_objpack
    object_header              = wa_objhead
    contents_bin               = t_objbin
    contents_txt               = t_objtxt
    receivers                  = t_reclist
EXCEPTIONS
    too_many_receivers         = 1
    document_not_sent          = 2
    document_type_not_exist    = 3
    operation_no_authorization = 4
    parameter_error            = 5
    x_error                    = 6
    enqueue_error              = 7
    OTHERS                     = 8.
IF sy-subrc EQ 0.
ENDIF.

ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '/INS_PRECOMP.mk' in 11g Form

Hi,
I am installing 11g Forms & Report [11.1.2]s on AIX 6.1, all other JDK and Weblogic Server installed Successfully without any error.
When i installed 11g Forms & Reports i am getting this below error on 92% of completion.
ERROR IN INVOKING TARGET 'RELINK' OF MAKEFILE '///INS_PRECOMP.mk'
What is this error. Oracle Support says its a well known error to be solve by create a symlink as root user.
They advised us to do this following
Yes, there is a known issue with AIX OS.
Before starting the Oracle Fusion Middleware 11g Classic installation on IBM AIX, check for "xlc" availability on the system. It should be present either under /usr/bin/ or under >/usr/vac/bin directory.
If /usr/vac/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/vac/bin/xlc /usr/local/bin/xlc
If /usr/bin/xlc is present, create the following symlink as root user:
# ln -s /usr/bin/xlc /usr/local/bin/xlc
Please clean up the failed install and start new install once you follow the above steps and let me know the results.The above steps are given by metalink support.
But we do not have the XLC folder in our OS.
Will you kindly advice me, why is that XLC folder Required ?
If it is a Compilers folder why we need that in Production Server Installation. ?
Kindly Advice me, we are hanged in this step for a more than 3 Days..
Regards
Paja

XLC is a compiler for AIX. If you don't have it, and someone believes you do then you will need to install it. Because you did not mention what MOS note you were reading it is hard to say if this is a good plan or not. Take a look here:
http://www.google.com/search?q=aix+xlc
Also, if you haven't already done so, this note may offer some guidance:
<blockquote>Installing Oracle On Aix:'Error In Invoking Target 'Relink' Of Makefile ...' ld: 0706-006 Cannot find or open library file: -l m (Doc ID 309668.1)</blockquote>
And this patch is worth installing once you correct the current problem as you will need it for future patch installations: Patch ID: 13990099

11g Forms Tab-Page Navigation

I am using Forms 11g on Solaris.
A main navigator form opens another form which has a content canvas, tab-page canvas and (3) stacked canvases.
The problem I am having is with tab-page navigation.     CTRL+TAB ( next ) and CTRL+SHIFT+TAB ( previous )
As long as I do not initiate navigation from an item on a stacked canvas, navigation is as expected ( between tab pages only ).
However, navigating from an item within a stacked canvas causes navigation to the parent form.
Repeating the tab navigation keys from the parent form returns to the called form.
Note that both key-combinations simply toggle back and forth.
I have found no documentation on tab-page navigation so any help / insight is greatly appreciated !
Mike

Hi Soofi !
Changing block order in the called form does not affect the navigation between tab pages.
Note in my question that the resulting undesired navigation is to and from the calling form ( which only has one block ).
Navigation between items and blocks works as expected.
To reiterate -
     The only navigation that fails is when I attempt to CTRL+TAB or CTRL+SHIFT+TAB to another tab page from within an item on a stacked canvas.
     Attempting this navigation results in moving the cursor focus to the calling form.
     Repeating the attempt from the calling form moves back to the called form.
     None of your methods mention navigation between forms .
Thanks for your interest.

How to avoid printing a balnk page at the end in the Adobe form output

Hello Experts,
Can anyone please let me know as how to avoid/delete the blank page at the end of adobe form output.
I have a master page with header n footer and a body page seperate.
For ex.. I have 3 line items and i want each line item to be displayed in the new page. I am able to get this functionality . I have set the settings in the paginationb tab of the subform as
"after " Go to Next content Area" " but an extra page is getting printed at the end. 3 + 1 extra pages total. I want to avoid this blank page. I have checked the Allow page break with in content box but it is still not working.
Can someone guide me as how to solve this problem.
Any help is appreciated. Thanks in advance.
Regards,
Mahesh

hey mahesh,
this normally happens because of triggering a new page manually, what u would have done is that you would be checking for the new line item and when this condition is satisfied , you are triggering a new page , the reason for the last blank page is that the condition gets satisfied ( beacuse the line item number changes from the last line item no to initial or space).
This can be handled by doing the following
By knowing the number of line items by the following stmt.
describe table itab lines v_lines.
Now you have the value in v_lines.
use a counter in ur form and keep it increasing it by 1 ( say v_sno ) ie v_sno = v_sno + 1 in the loop of ur internal table.
ONLY WHEN V_LINES IS LESS THAN OR EQUAL TO V_SNO , TRIGGER THE NEW PAGE
this should be along with the condition which u have already put, ie when ever line item no changes
when both these conditions are satisfied , then only the new page will be triggered.
Hope it helps,
Reward if useful,
Regards,
KP.

WEB.Show_Document(POP Up Window In 11g forms)

Is it possible to open a Http inside the POP Up Window In 11g forms.
This is what i tried to use:
Created a Dummy Window,dummy Canvas and by clicking the push button i gave this message:
web.show_document('http://www.google.com','Html_Window');
WEB.Show_Document will open only in seperated window but i need to open in the Pop Window is it possible please help on this.

As Denis mentioned, you cannot show html content natively in a form. You would need a bean to do that. However, if you are just trying to create something that looks like a standard browser pop-up window, there are several ways to do it. Be aware however, that in some cases, the following example will not work if you are using an older JRE. The latest JRE is 1.6.0_29 and runs the following code correctly assume the browser is not set to block pop-ups.
EXAMPLE 1:
web.show_document('javascript:window.open ("http://www.oracle.com","myPop","location=no,toolbar=no,menubar=no,status=no,resizable=yes,height=600,width=600");self.close();');
EXAMPLE 2:
Declare
     inJS      varchar2(32767);
Begin
     -- More info about window.open here:
     -- http://www.w3schools.com/jsref/met_win_open.asp
     inJS := 'new_win=window.open("http://www.oracle.com","new_win1","menubar=0,location=0,toolbar=0,status=0,scrollbars=1,resizable=1,width=500,height=600");';
     web.javascript_eval_expr (inJS);
End;

How do I open a form specific to particular user?

Hi All,
Please answer below questions:
1) How do I open a form specific to particular user?i.e I want to open a form as enterable mode for one user and non-enterable mode for another user.
2) How do I run a report specific to the particular user? i.e I want to run a report for one user here other user can not see the report.
Thanks in Advance,
Dhana

1) How do I open a form specific to particular user?i.e I want to open a form as enterable mode for one user and non-enterable mode for another user.Create a new responsibility, and set QUERY_ONLY=YES -- See old threads for similar discussion.
QUERY_ONLY
http://forums.oracle.com/forums/search.jspa?threadID=&q=QUERY_ONLY&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
2) How do I run a report specific to the particular user? i.e I want to run a report for one user here other user can not see the report.Through "Concurrent: Report Access Level" profile option.
Concurrent Report Access Level [ID 736547.1]
R12 View Concurrent Requests FAQ [ID 1261985.1]
Can't View Request's Output Submitted By Others [ID 949703.1]
How to View the Output of a Request Launched by Someone Else [ID 413382.1]
Thanks,
Hussein

Problem i'm facing while trying to open the form builder

Hi all,
I'm facing a small problem while i'm trying to open the form builder via Portal - content management - form builder, i.e., intially a dialogue box statting that :
Applet(s) in this HTML page requires a version of java different from the one the browser is currently using. In order to run the applet(s) in this HTML page, a new browser session is required, press 'Yes' to start a new browser session.
is getting displayed.
when i click either of the buttons, only a statement as : java plug in dected JRE collission get's displayed.
If any one knows what this problem is all about, please share the same.
thanks in advance...

Hi Vipin,
It should be the problem with the JDK version you have currently got installed. Un Install the current version and install latest JDK and set your browser to use this JRE.
Also goto System Admin>System Config>Content Admin-->Form based publishing and ensure that the check box for "Allow HTML Output" is checked.
Regards
Ramesh.

How to run oracle 11g forms in windows xp

Hi friends,
I have installed weblogic 10.3.4, Oracle Fusion Middleware Forms 11g 11.1.4 version....
Configuration of domail also successful...
I use the following steps to run the form
1. WLS_FORMS
start -> programs - > Oracle Classic Instance - asinst_1_FR1 - > Forms Services -> Start Weblogic Server - WLS_FORMS
it is successfully running - showing the Running Mode
2. open the form bulider and connect to the database.
3. in form builder runtime path is - http://localhost:9001/forms/frmservlet
4. When i click on run button web page was invoked... but nothing is coming... blank page is displayed..
Please tell me how to run the form.... Am trying the test.fmx which is in D:\Oracle\Middleware\as_1\forms.
My system configuration in 2gb ram, windows Xp ser 2 , 2.4ghz processor...
Regards
Deepak Kumar H.R.

Do the following:
1. As Sarah mentioned, ensure that you have JRE 1.6.0_12 or newer installed.
2. In the Builder, ensure that you have entered both the Application Server URL and Web Browser Location values. Neither of these fields should be left blank. The browser location should be the complete path to the desired browser and include the exe name. For example if you were going to use IE it would look like this:
C:\Program Files\Internet Explorer\IEXPLORE.EXE
These settings are found in the Builder under EDIT > PREFERENCES > RUNTIME

11g forms builder is not able to initiate the Internet explorer

Hi,
my problem is that my forms builder is not able to open the form in IE during compilation if Internet explorer is not already running but it is able to open the form in a new tab if Internet explorer is already running.
My system's specifications :-
Oracle forms builder 11g
Windows 2008 SP2
Internet explorer version :-Internet explorer 9
Please help.
Thanks,
RS

1. In the Builder verify that you have valid values for the Application Server URL and Browser Location fields in the Builder Preferences Runtime (tab). Do not leave either field blank.
2. In the browser settings, on the Advanced tab, scroll down to the Security section and check the box labeled, "Allow active content to run in files on My Computer".
3. Click Ok to save the changes. Close ALL open browsers
4. Retest

Unable to open some forms

I have installed Adobe reader. I am able to open some forms from a particular website, but not others. The one I need it a fillable online PDF form. Why am I not able to open this form when I can open others in the same format from the same website?

I need some help on the Forms issue, users unable to open the Forms it gives following error.
FRM-40010: Cannot read form /ul01/app/applmgr/lasrx/gl/11.5.0/forms/US/GLXIQACC.fmx.
In fact those fmx are not in the above path, its in different mount point /ul03/app/applmgr/lasrx/gl/11.5.0/forms/US/GLXIQACC.fmx.Please post the output of the following commands:
$ echo $APPL_TOP
$ echo $GL_TOP
Was APPL_TOP set properly when you cloned the instance?
I am not sure from where it's reading the .fmxIt reads from the value of $GL_TOP
Could anybody tell where to check , might be some environmental files.Check the application context file as well as the application env file (search for u101 and replace it with u103). If you change the context file, run AutoConfig and bounce all the services.
Thanks,
Hussein

To Open 11g Forms output on a seperate popup window

Similar Messages

Maybe you are looking for