To populate values in Table

Hi,
I need to populate values in a table which i got from the bean...
i have retrived the values in Class[] and if i populate the table (as in code  below).. i get only the first record..
i have created a value node (GroupNode) in the view context and iam binding the values to it from my Java Command Bean (CategoryBean)..
The code is as follows..
GroupDTO[] groupDTOs = wdContext.currentCategoryBeanElement().modelObject().RetSameCatidObj();
    //   Collection groupList = new ArrayList();
   for(int i=0;i<groupDTOs.length;i++){
     groupList.add(groupDTOs<i>);
     IPrivateDel_sda.IGroupNodeElement ele =  wdContext.createGroupNodeElement();
                    ele.setCategoryid(groupDTOs<i>.getCategoryid());
                    ele.setGroupid(groupDTOs<i>.getGroupid());                              
wdContext.nodeGroupNode().bind(ele);
Is there any workaround to solve the issue...
Thanx.
Shravan.

this my code which gives first record in the table
wdContext.currentCategoryBeanElement().modelObject().setCategoryid(wdContext.currentGroupbeanElement().getCategoryid());
GroupDTO[] groupDTOs = wdContext.currentCategoryBeanElement().modelObject().RetSameCatidObj();
for (int j = 0; j < groupDTOs.length; j++)
  IPrivateDel_sda.IGroupNodeElement ele =  wdContext.createGroupNodeElement();
  ele.setCategoryid(groupDTOs[j].getCategoryid());
  ele.setGroupid(groupDTOs[j].getGroupid());                                   
  wdContext.nodeGroupNode().addElement(ele);
thnxs 4 ur reply
shravan
Edited by: Armin Reichert on Jan 19, 2008 12:15 PM

Similar Messages

  • Populate field1 in table, based on dropdown value of a field2 in same row

    Hi Experts,
    I have created an offline interactive Adobe form and need help with java-script on events. I will describe my scenario below -
    I have written an SE38 report program which will generate the PDF. To pre-populate fields in the PDF, I have a structure Default_Values which has a few internal tables. One of the internal tables Employees has 2 fields Emp_Code and Emp_Name. I have written code to obtain a list of employees and populate this internal table Empoyees. I call the Adobe form and along with other parameters, pass this structure Default_Values. Thus all the default values along with the internal table Employees pre-populated with the Employee Code and Employee Names have been passed to the Context.
    In the Adobe form I have a table with 10 lines with Employee details (6 columns, 2 of which are Emp_Code and Emp_Name)
    In this table control, the column Employee Name is a drop down list. For this column, under List Items, I have created a binding to the internal table Employees with default values. This binding Items looks like this - $record.DEFAULT_VALUES.EMPLOYEES.DATA[*] with Item Text and Item Value having the value EMP_NAME.
    When I test the form, I can see all the Employee Names in the drop down list in the column Employee Name of the table control.
    My requirement is that when a user selects an Employee Name from the drop-down list, the field Emp_Code for that row in the table control should be automatically populated with the corresponding value of Emp_Code  depending on the Emp_Name which the user has selected.
    I am new to Java-scripts and Adobe forms. I have searched this and other forums, however I couldn't find the right code which I can place in either the Change or Exit event of the drop-down to accomplish this.
    Can someone please provide me with sample code to achieve this.
    Any help will be greatly appreciated.
    Thanks in advance.
    Regards,
    Neha

    Hi Neha,
    I would prefer not to use FormCalc for this requirement.
    Array Processing shall be done in Java Scripting and you simply cannot have two different scripting language elements in the same scripting block.
    First create a table type parameter in the interface or GT_* type in Global variable and pass all the necessary entries of dropdown to the table type parameter. Once included in the context it shall be available in your data view of the form.
    To access any repeating instance node of the form in the data view, use te following script -
    var theFields = xfa.resolveNodes(
                      "xfa.datasets.data.data.CUSTOMERS.DATA[*].NAME");
    assuming that you have a table named CUSTOMERS in the Data View.
    For more details on XFA Data Model refer to
    [http://help.adobe.com/en_US/livecycle/es/lcdesigner_scripting_reference.pdf]
    Hope these inputs help.
    Regards,
    Rohit

  • How to populate values in to dropdown in table ui element

    Hi,
    according to my scenario  i have atable with five records ...andi have acolumn name DATE and  it contains 5 dropdowns with some values i.e dates from jan 1 2008-dec 31 2008.user needs to select only those values which are in dropdown. can u tell me the code to populate values in to dropdown in table UI element.
    Thanks
    Raju

    Hi,
    you can go for two drop downs like DropDown by Key or Drop Down by Index as per requirment.
    Create context Node for the table UI, in that one will be for ur drop down. Create element for the Context node and add thses to the conetxt.
    Code example for DropDownBy Key:-
    ISimpleType simpleType =               wdContext     .nodeProjEstiTable().getNodeInfo()
         .getAttribute("projphasname")               .getModifiableSimpleType();
    IModifiableSimpleValueSet svs1 =
    simpleType.getSVServices().getModifiableSimpleValueSet();
    svs1.clear();
    for (int j = 0; j < projphasname.length; j++) {
         svs1.put(projphasname[j][1], projphasname[j][1]);
    for DropDownBy Index you can work in normal way means try to create element for the respective context attribute.
    Hope this may help you...
    Deepak

  • Populate Values for Drop Down by Index in Table in Web Dynpro Java

    Hi Experts,
    I have a table and having a column table cell editor as Drop Down by Index.
    I have created the table node (tbnode) and child node for DDBI (ddbinode) and set the singleton property for DDBI node to false.
    I have same local variable node as same as above node and the values are available.
    I have one button ADD.On click the add button i need to populate the values to table node and as well as DDBI Node.
    I created supply function for DDBI node and populate the values for DDBI Node.
    Add Method:
    IPrivateMdTest8CompView.ItbnodeElement tbnode = wdContext.nodetbnode().createtbnodeElement();
    tbnode.setDescription(wdContext.currentCn_LocalVariableElement().getDescription);
    wdContext.nodetbnode().addElement(tbnode);
    Supply Function Method:
    for(int j=0;j<wdContext.nodetbnode().size();j++)
    wdContext.nodeddbinode().setLeadSelection(j);
    IPrivateMdTest8CompView.IddbinodeElement ddbinode = wdContext.nodeddbinode().createddbinodeElement();
    ddbinode.setddvalue(wdContext.currentCn_localddvalueElement().getddvalue);
    wdContext.nodeddbinode().addElement(ddbinode);
    Problem is one i got the values in the drop down and i click the second row in table again the supply function calls and reset the first row drop down to original value.
    If you any problem like please provide the solution.
    Thanks & Regards,
    SatheshKumar R

    If you created the supply method by setting the supply property of the node, you should have variable 'node' available as argument of the supply method, which will be related to the table row of the triggered dropdown. Opening the dropdown does not change the lead selection of the parent node, so
    ddbinode = wdContext.nodeddbinode().createddbinodeElement();
    wdContext.nodeddbinode().addElement(ddbinode);
    does always relate to the first row of the table (given that leadSelection == 0). With the node variable you can
    IddbinodeElement ddbiElement = node.createddbinodeElement();
    node.addElement(ddbiElement);

  • How to populate a text field by some value from table in Oracle seeded page through Personalization?

    I have to populate Description field by default in AGIS page (Advanced Global Intercompany System).
    Field Description:
    messageTextInput: Description
    VO: FunTrxHeaderVO
    VO Attribute: Description
    VO is entity based.
    Now if the field is null then I have to populate this value by some value from table for selected batch_id.
    Example:
    (SELECT DESCRIPTION FROM fun_trx_batches WHERE batch_id =
    211061)
    Also, this value is being populated in the Batch Information region in the same page. So the problem is also be treated as to copy a value from one messageStyledText to messageTextInput in a same page.
    Can this be done through personalization, w/o coding?
    Please suggest if you any idea how to resolve..
    Regards,
    Pahari

    Not sure why it is not displying in the front page list??
    I have to search it.
    Admin team, please help.
    Regards,
    Pahari

  • Auto populate values in the the database table

    Hi All,
    I have a requirement where user enter values in one of the ZTransaction. This will update a Ztable. So the new requirement is to add two new columns in the fields, which is completed. Now this two new fields are supposed to auto populate values based upon the key field .
    The transaction code is defined with Transaction as SM30 and Default values as
    Name of the screen field     value
    Update                               X
    VIEWNAME                      "table name which the values are updated".
    Please let me know how to do this.
    Thank you!!

    Hi Swetha,
    I am unsure of what you are trying to accomplish so I will make a few assumption and perhaps you can find some benefit in it.
    I suppose you are trying to add new fields to a custom (Z) database table.
    If so then use SE11 to add the two new columns.
    After this is complete then rebuild the table maintenance by using the following path: SE11-> Utilities->Table Maintenance Generator.  (Remember to double check the Recording Routine Radio button.)
    If the user needs fields automatically populated then check the following link.  It describes how to use table maintenance events.  I suppose you need to use Event 01 and Event 05.
    http://help.sap.com/saphelp_nw04/helpdata/en/91/ca9f0ea9d111d1a5690000e82deaaa/frameset.htm
    Good luck and reward points if helpful,
    AK
    Moderator message -  Asking for points is against the Forum's RoE
    Message was edited by: Suhas Saha

  • To populate values into single field in an internal table

    Hi Friends,
    How we need to populate values into single field in an internal table.
    E.g itab consits of single field ( name)
           i need to assign values to this field name .like
          peter,
          john,
          abrahm,
          daneyal
    Pls tell me i how i need to code for this
    Thanks ,
    Parnith

    Hi,
    Please look at the below code :
    DATA : BEGIN OF itab OCCURS 0 ,
             name(20) TYPE c,
           END OF itab.
    START-OF-SELECTION.
      itab-name = 'Peter'.
      APPEND itab.
      CLEAR itab.
      itab-name = 'John'.
      APPEND itab.
      CLEAR itab.
      itab-name = 'Abrahm'.
      APPEND itab.
      CLEAR itab.
      itab-name = 'Daneyal'.
      APPEND itab.
      CLEAR itab.
      LOOP AT itab.
        WRITE : / itab.
      ENDLOOP.
    Thanks,
    Sriram Ponna.

  • How to Populate  local variable values to tables like likp .

    Hi..I have taken 3 local variables date1 date2 and date3 .How to populate them in table (likp-lfdat).In date1 i have dates of lfdat between 14/05 to 21/05 and date2 from 22/05 to 28/05 and date3 one more week.In o/p how can see data between these dates range only?

    Use Where clause as:
    WHERE
    LFDAT IN DATE1
    OR LFDAT IN DATE2
    OR LFDAT IN DATE3.
    Regards,
    Anil

  • How to populate the condition tables of CRM 7.0

    Hello Friends,
    How to populate values in CND* tables , i assume these are the tables that hold the conditions.
    Thanks and Regards,
    Vasu

    Hi,
    if you refer to CND* tables those are tables involved in the condition master data exchange between ERP and CRM (on CRM side). Actual condition tables for pricing related condition records start with CNC*. In the help there is a documentation of the condition master data tables for pricing available: http://help.sap.com/saphelp_crm70/helpdata/EN/0e/91f9392486ce1ae10000000a114084/content.htm
    Hope this helps.
    Best Regards,
    Michael

  • Create a table in SQL Server, Export tables from Microsoft Excel to Microsoft SQL Server, Populate the created table

    Hello team,
    I have a project that I need to do, what is the best approach for each step?
    1- I have to create a table in Microsoft SQL Server.
    2- I have to import data/ tables from Microsoft Excel or Access to Microsoft SQL Server. Should I use Microsoft Visual Studio to move data from Excel or Access?
    3-I should populate the created table with the data from the exported data.
    4-How should I add the second and third imported table to the first table? Should I use union query?
    After I learn these, I will bring up the code to make sure what I do is right.
    Thanks for all,
    Guity
    GGGGGNNNNN

    Hello Naomi,
    I have imported all the tables into SQL Server,
    I created a table:
    CREATE
    TABLE dbo.Orders
    Now I want to populate this table with the values from imported tables, will this code take care of this task?
    INSERT INTO dbo.Orders(OrderId, OrderDate)
    SELECT OrderId, OrderDate
    FROM Sales.Orders
    UNION
    SELECT OrderId, OrderDate
    FROM Sales.Orders1
    Union
    SELECT OrderId, OrderDate
    FROM Sales.Orders2
    If not, what is the code?
    Please advise me.
    GGGGGNNNNN
    GGGGGNNNNN

  • Retrieving values from table control using DYNP_VALUES_READ

    Hi all,
    I am trying to retrieve the values from the table control using the FM DYNP_VALUES_READ. I have a situation where user enter values in table control in T.code FB60 in Withholding tab for validation purpose. There i'll have to check based on some entries maintained in SET.
    I am unable to get the values when i scroll to the next page in the table control. FM raising an exception invalid_dynprofield.
    Expecting reply...

    You have to populate the dynpfields internal table before calling the function,
    data: repid like sy-repid.
    dynpfields-fieldname = 'PNAME'.
    append dynpfields.
    repid = sy-repid.
    call function 'DYNP_VALUES_READ'
    exporting
    dyname = repid
    dynumb = sy-dynnr
    tables
    dynpfields = dynpfields
    exceptions
    others.
    read table dynpfields index 1.
    pname = dynpfields-fieldvalue.
    Now you will have the field value in pname
    Hope this helps
    Vinodh Balakrishnan

  • Need help in creating a page that populates 3 related tables

    Hi All,
    I am pretty new to Oracle and have been trying to use the wizards in HTML_DB to create one page that will populate three tables. I have thus far have NOT been able to find my solutions. I do not know enough experience in SQL/PL_SQL to create the code on my own.
    Here is my dilemma. I have three tables:
    con (for contacts) - with regular contact info = l_name, f_name, phone...
    pro (for different programs) - with different program info = pro_name, priority..
    procon (Contact/program) - that joins the two together with initial, follow-up and close date fields.
    I created a composite primary key in the procon table that consists of the two pk's of the other two tables (using fk relationships).
    I want to be able to use one page in HTML_DB to enter in the data which will populate all three tables. Is there a way to do this in PL/SQL?
    * Also: Is there a book out there that you can recommend that really teaches SQL/PL_SQL?
    I would really, really, REALLY appreciate the help!!!!!
    Thanks,
    d.

    This isn't as bad as you think. I would create one procedure in a package and pass the parameters to the package via htmldb
    procedure insval(in_a in number, in_b in number, in_c in number)
      begin
       insert into tablea(cola)
        values(in_a);
      insert into tableb(colb)
       values(in_b);
      insert into tablec(colc)
       values(in_c);
      end;and then you call it from htmldb using a process
    schema.package.insval(:p1_a,:p1_b,:p1_c);That's ultra-simplified, but will get the job done.
    -Scott

  • How to populate values in a Listbox parameter in selection screens

    I have a parameter(as list box) field in selection screens. And now I want to populate a list from a ztable field values.  How to do that.
    Thanks in Advance

    Hi,
    You have to use the FM VRM_SET_VALUES.
    Check this example..
    TYPE-POOLS: vrm.
    PARAMETERS: p_test TYPE char4 AS LISTBOX VISIBLE LENGTH 10.
    DATA: t_data TYPE vrm_values.
    INITIALIZATION.
    DATA: s_data TYPE vrm_value.
    <b>***Here you to have to do the select and populate the internal table
    ***t_data.</b>
    s_data-key = 'ABCD'.
    s_data-text = 'First four'.
    APPEND s_data TO t_data.
    s_data-key = 'EFGHI'.
    s_data-text = 'Second four'.
    APPEND s_data TO t_data.
    CALL FUNCTION 'VRM_SET_VALUES'
    EXPORTING
    id = 'P_TEST'
    values = t_data
    EXCEPTIONS
    id_illegal_name = 1
    OTHERS = 2.
    IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
    WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    START-OF-SELECTION.
    WRITE: / p_test.
    Thanks,
    Naren

  • How to populate data from table into datagrid in form

    hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks

    Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
    Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null.

  • How to populate value node with values?

    Hi Experts,
    I have created a new view with a vlaue node of table type.
    How can I populate values into the value node?
    Which method will be useful?
    Is there any material for Web UI Programing?
    Please help me in this.
    Thanks,
    Adi.

    Hi Adi
    If ZVal is your value node then,
      DATA: lref_entity    TYPE REF TO cl_bsp_wd_value_node,
            lref_bo_coll   TYPE REF TO if_bol_bo_col,
            lref_data TYPE REF TO <<your ZStructure>>,
             ls_data type <<your ZStructure>>.
    ls_data-<<field1>> = 'XYZ'
    ls_data-<<field2>> = 'XYZ'
         CREATE OBJECT lref_bo_coll TYPE cl_crm_bol_bo_col.
          CREATE DATA lref_data.
          CREATE OBJECT lref_entity
            EXPORTING
              iv_data_ref = lref_data.
          lref_entity->set_properties( ls_data ).
          lref_bo_coll->add( lref_entity ).
          typed_context->ZVal->set_collection( lref_bo_coll ).
    Hope this was helpful.
    Best Regards,
    Lakshminarayana

Maybe you are looking for

  • What will be ABAP adaptaion for this VB code

    Hi Experts, I am doing a program by integrating ABAP with EXCEL, i need to write the following code in ABAP which is recorded by macro. I need to change the Category Type of the AXIS from Default to Text. "ActiveChart.Axes(xlCategory).CategoryType =

  • Spool get lost while job runs in background

    Hi We wrote a custom program where in we use two custom bapi's which were copied from original bapi's. When we run this interface program in backgroud, we have lost the spool. But when we run the test with limited data in foreground, it works fine. W

  • How do I get the export value of a combox upon opening a document?

    I can't find a way to access the currently selected export value from a combobox upon opening a PDF document (without a keystroke event), so I'm using a very ugly trick (I have a function with a switch statement that returns a value that matches the

  • Sources of Supply

    Hi I am using function module 'BBP_EXTREQ_INBOUND' to create shopping carts in an ABAP program. It works well and the shopping cart is created. My question is when you go into the SRM Portal and check the data everything is populated ecept the sectio

  • Dreamweaver Login Wizard won't complete

    Hi I have coldfusion MX 7 installed on the remote server and Dreamweaver MX 2004 installed on my local desktop. I also installed the ColdFusion MX7 extension(CFMX7 Extensions version 1.1.0 by InterAKT Online) for dreamweaver on my local desktop. I wa