To print line item number in workflow message

Hi Experts ,
I want to print line item numbers of a sales order in a single workflow message .
Can this be achieved ?
I am generating WORKFLOW item , for a sales order , and want certain line item numbers to appear on the WORKFLOW message .
Something like Sales Order XXXX has line item 20 30 50 .
Regards,
Sunitha

1. Enhance appropriate custom BOR Object.
2. Create one Attribute which will gives you String output - Write program to this attribute to fill the string will all relevant texts for example : Line Items 10, 30, 54, 89.
3. Place this string in your work item description. So that your work item / email will carry this string under certain conditions.
you many need to handled exception.
Example -
Dear User.
Please Check the Sales Order 23456. The below line items went for Delivery block.
Line Items 10, 30, 54, 89.
Regards,
Admin
All the best,
Vamsi

Similar Messages

GR Doc# and GR Line Item Number

Hi All,
We have custom defined infocube actually WM-stocks.Now our requirement is to add GR Number and GR line Item Number. can be these be added to Infocube or should we go for ODS? any help from experts?
Data has been loaded from generic datasource which is based on LQUA table.
regards

Hi,
We implemented just the opposite:
A cube for line items, an ODS for header data which didn't went to the cube (I mean those data that cannot be calculated by summing up item data).
If we need summary data from ODS, we use RRI.
Everything depends on a level of details you need. In our case we needed analysis on item data.
Best regards,
Eugene
Message was edited by: Eugene Khusainov

Clear line item number

hi experts,
My requirement is to clear line item number(zeili) so that it can't be seen in the form output.
but after clearing zeili in print program , it is showing '000' in print o/p.
I don't want to show anything in print o/p of the form.
Plz tell me how to remove this '000' from the output.
Replies will be rewarded.
Thanks in advance.
SM

Hi,
Use &itab-fld(I)& which suppresses the initial value of the field. Chk out, it may work.
Regards,
Narendra.
Reward points if helpful!!

F-54 Balancing field "Profit Center" in line item 002 not filled Message no. GLT2201

Hi,
During F-54 error "Balancing field "Profit Center" in line item 002 not filled" "Message no. GLT2201" showing.
I have gone through previous posts with message no. I got below solutions but those applicable belongs to EHP 600 but ours is EHP 605.
1. Note: 930365 not applicable for EHP 605
2. Note: 887794 correction process according to note applies max EHP 600.
3. http://wiki.scn.sap.com/wiki/display/ERPFI/Document+split+when+clearing+down+payment+with+taxes
My querrys are If i apply above 2 & 3 points solutions what will happen. However instead of creation of new "Document type" if i do configuration changes for existing document type "KA" what will the negative impact and risk.

Dear Mr Rahul
Thanks for your suggestion
but there's something odd about this..
the other company code is working just fine for years..
and i've already maintain configuration both for doc splitting especially the splitting rule and GSP_KD1
yet the error still occur
is there any suggestion Mr Rahul?
or anyone?
Best Regards
Rumi

Reset Cleared Doc - Balance of the line item is not zero" Message no. F5136

I have this error : Balance of the line item is not zero" Message no. F5136
This error arise when we tried to reset cleared document dated June 6,2007 during data migration from Legacy system to SAP.
We wanted to reset this cleared document because it was wrong executed (cleared) way back 2007.
The entries are:
Debit to GL (B/S) --> 3,758.48
Credit (1100039-Vendor) with special GL (408319) --> 3,758.48
=====================================================
For us to correct the clearing, we need to reset first the cleared document via FBRA, however, this error arise saying "Balance of the line item is not zero" with Message no. F5136.
I read several posted issue here, however, it doesn't resolve my problem.
Hoping to hear from your inputs on this problem.
Regards,
macalonge

Dear:
SAP Note 400530 - FBRA - F5136: Balance of line items not zero
describes your issue as
Summary
Symptom
A payment using a payment card fails, in other words, the payment is reversed using Transaction FBRC where the customer or vendor item is reopened.It is not possible to reset a payment document posted again for the open customer or vendor item by using Transaction FBRA, "Reset Cleared Items" and it responds with the error message "Balance of the line items is not zero".
Other terms
Error message F5136, FBRA, FBRC, payment cards
Solution
A solution is available in the Support Package for Release 4.0B and 4.6C. An advance correction is possible. The solution consists of a repair report, so that the current payment document can be reset by means of 'Reset Cleared Items', and of a correction.
1. Repair-report ZREPAIR_BSEGC_FBRA:Create it temporarily as a test report using Transaction SE38. First the current payment/clearing document must be cleaned up of payment card data by means of the repair-report. Afterwards you can reset the payment document by means of 'Reset Cleared Items'. The report takes the current payment document as a parameter. In this case only changes are made to the database if the option "DO_UPD" is set.
2. Advance correction:Supplement the interface for function module CREDIT_CARD_POST_REFUSAL with table parameter T_BSEG with reference type BSEG. The following describes the procedure in more detail.
a) Transaction SE37: Enter function module CREDIT_CARD_POST_REFUSAL and choose "Change".
b) On the "Tables" tab page, create parameter T_BSEG with reference to structure BSEG.
c) Save and activate the function module.
3. After you implemented the correction or the R/3 Support Packages valid for this note, read Note 450081 to avoid the unwanted deletion of payment card data.
Hope it will help
Regards

How to print line item 2times in two different main window in Sap Script

Hi,
I am designing check printing form using Sap script. I need to print line items 2times in different 2main window.can yu pls explain how print like this.
JK

i cud not get ur query..pls elaborate

Line item number per invoice

Hi Gurus,
i need to display the line item number in the report as per the FB03 tcode per a document
i have a query on a multi provider which includes 0FI_AP_4(FIAP) and 0FI_TX_4(FI TAX) cubes
iam not getting the correct lineitem value as per FB03 tcode
how to get this value in the report
Please provide inputs
Thank you

Hi,
0FI_GL_4 extractor pulls data from BSEG table as well as FB03 does.
Check if the data from this extractor suits your requirement.
Regards,
Tiago.

BAPI_SALESORDER_CREATEFROMDAT2 Purchase order line item number

Hi Freinds,
I have small issue using the function module "BAPI_SALESORDER_CREATEFROMDAT2" , it is creating incomplete sales orders when the Saleorder line item number and POline item number are different.
Example:
If i assign the same value like "000010" for ptb_items-itm_number,ptb_items-po_itm_no it works fine and sales order doesn't have any incomplete log.
but when i have different values like "000010" for ptb_items-itm_number and "000123" for ptb_items-po_itm_no. both the cases all other information is same.
Could anybody helps me to fix this problem so that i can avoid creating incomplete sales orders.
Thanks for the quick reply and help.
Regards,
Praveen

Hello Praveen
The items structure BAPISDITM has a field PO_ITM_NO (Item Number of the Underlying Purchase Order) which most likely links the two numbers together.
Regards
Uwe

Printing line items in next line smartforms

how to print line item description in next line...
suppose
i have line item description as
"this is description of line item"
then i need to print as
"this is"
"description of line item"
in two lines......
so that no trunkation takes place please reply me ....

Use offset
v_text(20)
in the second line use
v_text+20(40)
If this does not work
then declare two more fileds
and write the code
v_text1 = v_text(20)
v_text2 = v_text+20(40)
and print the new fields
Reward points if useful,
Regards,
Nageswar

Purchase requistion number and line item number linkage with work order opr

Hello,
I want to know what is the link between Purchase requisition number along with its line item number with work order operation number.
For the non stock component assign to Work order operation ( say operation 10) the PR get generated for that component which assign to that operation .
in which table we can find that PR as input and output as Work order number along with its operation .
In AFVC table if we put PR as input then it does not show any entry for that PR number?
Regards
Vaibhav

HI Vaibhav,
If you have the Work Order Number AUFNR, then you can get AUFPL from AFKO.
Then Pass AUFPL to AFVC table to get BANFN(Purchase requisition number) and BNFPO(Item number of the purchase requisition in the order).
Regards,
Ravi

J1INPR - Balancing field "Profit Center" in line item 001 not filled Messag

Dear Expert,
I have made settings for WHT on provision of services received.
I have set document type SA for posting and relevant cearing A/c with FSG -G019
But when I run J!INPR below error message is coming:-
Balancing field "Profit Center" in line item 001 not filled
Message no. GLT2201
pl advise what needs to be done.
Regards,
Alok

Dear Lakshmipati,
Please inform me the solution message which is discussed earlier, i am not able to trace it in the forum,
Regards,
Alok

Line item number and ledger item number posted differently

Hi Friends ,
I have a BAPI for posting the documents in SAP from another system.This BAPI is using the standard BAPI - 'BAPI_ACC_DOCUMENT_POST' to post the documents.But when I post the document using this BAPI the line item number and ledger item number in the document are posted differently. ie . for line item no 1 ledger item is 24 .But when I am posting it directly it is same ie for line item no 1 ledger item no is also 1.Lot of other programs in our R/3 system is dependent in this logic.What could be the parameters in BAPI that could affect line item and ledager item ? Can anybody help me in finding out the reason for this ?
Thanks in advance ,
Joby

Hi ,
Anybody can help me on this issue ?
Thanks in advance ,
Joby

Hi,How to trace line item number in SHC

Hi friends,
I would like to know from where this line item number in SHC comes?
Wether we need to do any settings or it is system generated?
In my case this is jumping like if one item in SHC is having line item number 1 then next one is coming like 20 ?....so its a strange......
Regards,
Navneet

Hi
SPRO Path
Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Number ranges -> Define number ranges for shopping cart and follow-on documents
In SPRO Setting, you define number range settings for shopping cart, etc.. using SNUM / BBNU transactions.
Technically speaking, there is a field NUMBER_INT inside the BADI Standard SRM Structure, which is called at run-time to create a number (Satrting with 10, then 20, then 30, and similarly onwards... ). [Similar to the line item numbers, what are created in R/3 system Purchase order number, Sales order number transactions]. Incase you implement BBP_DOC_CHANGE_BADI, you can find the detailed numbers in every line item..
Hope this will help.
Do let me know.
Regards
- Atul

UDF for Line item number

Hi All,
Currently i'm working on a EDI2JDBC scenario. we have a field called LINE_ITEM_NUMBER at the target side. The incoming EDI signal doesn't contain the line item number and at the target side for every line item we need a create line item number. Lets suppose the incoming signals contains 3 line item number then at target side the value for LINE_ITEM_NUMBER should be 1,2 and 3. Can i achieve this functionality with any standard function or do i need to write an UDF? Can anyone provide the code for UDF?
Your hekp is highly appreciated.
Regards
Faisal.

Hi Faisal,
The Below mapping will work for your requirement..
Source(LineItemNumber)--->Index(Initial Value = 1, Increment = 1 )------\
 then
Source(LineItemNumber) ----> Exisists -----> If ------>Target(LineItemNumber)
 else
 Constant[0] ------------/
If Input is
<Source>
 <Line>aaaa</Line>
 <Line>bbbb</Line>
 <Line>cccc</Line>
</Source>
Your Target will be Like This
<Target>
 <Line>1</Line>
 <Line>2</Line>
 <Line>3</Line>
</Target>
I have Tested That Mapping.. Working as shown below.
Let me know For any clarifications..
Regards
Jyothi A.

CDPOS - Line Item Number

Hi
Table CDPOS gives the changes made onto a SO Line Item. But it has no infomormation on which Line Item Number.
Still, the program RVSCD100 gives the Line Item Number for that change.
I could not find out from where it picks the Line Item number!
Could anybody help me how to find the Line Item Number for the records in CDPOS?
Please help..
Richard

the field table key in CDPOS has the concatenated key field value.
If you are refering for vbap table:
for example
MANDANT    100
OBJECTCLAS VERKBELEG
OBJECTID   0000000001
CHANGENR   0000028225
TABNAME    VBAP
TABKEY     1000000000001000010
FNAME      NETPR
Here table key
client + sales order no + item no
derive the item no from there

To print line item number in workflow message

Similar Messages

Maybe you are looking for