To save to the server, correct the invalid or missing required fields.

We have a SharePoint 2010 document library that has a required field that is from an external data source. When we open existing Excel documents, a ribbon appears stating "To save to the server, correct the invalid or missing required fields.".
If you go File>Info>Document Information Panel you will see this external data source field with a Red Asterisk and it says "Show Details". If you click "Show Details" it will show you the "Document Properties - Server"
toolbar and you will see this field populated. It is however read only, and I believe that it is because its an external data source. It will not let us save any excel documents as it seems that Excel feels this field is empty or incorrect.
The same happens with Microsoft Word documents, in that if you open an existing document and go to the document control panel you will see the external data field with a Red Asterisk and it says "Show Details". If you click "Show Details"
it will show you the "Document Properties - Server" toolbar and you will see this field populated but read only; the difference is with the Word documents we can save and close the documents. If we upload a new excel document, it behaves
just like word documents, so it seems its only applicable to existing excel documents.
Over the past 2 weeks we have upgraded from SharePoint RTM to SharePoint SP2. This is has never been reported prior to the upgrades so I am assuming, but cannot confirm, if it was caused by the upgrades.
I see there are workarounds online for Word, but nothing for excel.
Any help for further troubleshooting would be greatly appreciated.
Thanks
Ken
Kenneth Clebak

Hi Ken,
According to your description, the error will occur when saving the documents in the library which has an external data column from client application.
The document which cannot be saved may contain invalid XML information or invalid XML properties.
I recommend to remove the invalid XML information before you save the documents:
Open the document in corresponding client application.
Click File, click Info, click Check for issues, and then click Inspect Document.
In the Document Inspector dialog box, accept the default options, and then click Inspect.
In the Document Inspector dialog box, click Remove All, and then click Close.
Best regards.
Thanks

Similar Messages

The document could not be saved. The server said: "The operation failed because an unexpected error occurred. (Result code 0×80020005)" Please ensure you have completed all required properties with the correct information and try again.

I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010

Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta

Could not connect to the server because the name or password is not correct

Everyday I use Command + K to bring up the "Connect to Server" dialog, select the server from "Favorite Servers", click the Connect button, receive a prompt to provide my credentials to access the network share, then the share mounts and I access the files on it.
Starting yesterday I no longer get the prompt asking me to provide the domain, username and password, it just tries to connect to the server then reports the following error:
"Could not connect to the server because the name or password is not correct."
I've restarted my Mac but still does the same thing. I'm able to connect to other server shares just fine, prompts me for the username and password, but this one particular server just will not prompt me for the username and password.
I've done the following to try and resolve it but without any success in doing so:
I've restarted the server
I ran Repair Disk Permissions in Disk Utility
Ran Keychain Access --> First Aid --> Repair
Tried to find an entry in Keychain to remove, none listed
Able to connect to share within Fusion running XP
Anything I missing?

Hi Troy-
It surely is starting to look like it's some kind of security setting on the Win-Server...something that's different from the other server you just patched.
If you've looked at local and domain policies that do not 'require' digital signing, then I'm a a loss. (I don't have the exact settings, but it's been discussed here ad nauseum over the past two years)
Has something to do with disabling digital signing of communications "always", and enabling "when possible"... other than that, I've forgotten the exact policies...Look in security policies, and you'll probably see what I'm trying to describe.
(Glad I got my daily brain-hiccup out of the way early today!)

Just found out that my intrnet service provider has an imap email set up and means that I cannot leave a copy of my emails on the server, correct?

Just found out that my intrnet service provider has an imap email set up and means that I cannot leave a copy of my emails on the server, correct?

IMAP email is server based. All messages remain on the server and are viewed remotely when using an email client like Thunderbird. If you delete the message from a remote device it is removed from the server.

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

An Error Occurred During Report Processing - Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 12019

When I run the report on production I got the following error message:
Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the
request on the server. The status code returned from the server was: 12019
It hasn’t happen on Dev and Test before.
I googled, The error is described as:
12019 ERROR_INTERNET_INCORRECT_HANDLE_STATE
The requested operation cannot be carried out because the
handle supplied is not in the correct state.
But I cannot find the solution for that.
Has it happend to you before? How to solve that?

Same behaviour here, Sharepoint 2013 with SSRS in integrated mode
Error: Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status
code returned from the server was: 12019

On the iPhone, when the server rejects the email address and it sits in the outbox, why doesn't it automatically resend when the server is fixed?

On the iPhone, when the server rejects the email address and it sits in the outbox, why doesn't it automatically resend when the server is fixed?

Hi Razmee,
Thanks for your response.
The mail server worked when I originally set it up and continued to work for months afterwards.
What would make the outgoing mail server not be set up correctly after all that time?
Thanks again.

The server returned the error: The connection to the server on port 143 timed out.

Hello,
I recently got a MacBook Pro which cam ewith Mavericks. I have entered the email addresses I use the most, they are a combination of Gmail and personal ones that are set up with two different hosting companies. After a random amount of time which may be 5 minutes after opening Mail up to 8 or 9 hours the mailboxes start giving the error 'The server returned the error: The connection to the server xxxx.xxxx on port 143 timed out.' where xxxx.xxxx is the IMAP incoming mail server, the port is 993 for the Gmail accounts. Once it happens for one the others soon follow. The same accounts on my Mac Pro still work correctly at the same time. Anyone have any ideas?
Edit: I have run the Connection Doctor and while it can connect to each of the SMTP servers it cannot connect to any of the IMAP ones. A restart of Mail will cure this temporarily.

Mobileme has moved to moved iCloud:
http://www.apple.com/icloud/setup/
Note, if you have Mac OS X 10.6.8 or earlier, read this tip before updating to 10.7:
https://discussions.apple.com/docs/DOC-6271
And this tip about changes to iCloud from Mobileme:
https://discussions.apple.com/docs/DOC-2551

I bought a new imac running Loin and Office 2011. The server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software.

I bought a new imac running Loin with Office 2011. I am the only mac in the office and the Server we use to access emails runs exchange 2003 and my IT person says the imac is not compatible with the server. The server does not want to let me access using any email software other than webmail access through our website. It looks as though 2011 is not compatible with 2003 per some searches online, but what are some options I have to gain full access again? I purchased parallels in hopes that this my help and I am able to use remote desktop connection to log on to server but can not drag and drop files I need. There is a shared drive on that Server we all use to exchange files.
The two main issues are gaining access to my email again and ability to drag and drop files from mac to pc. I hope this is enough info to get some solutions.
PS - IT person says my iMac's IP is what his server does not understand so that is why I can not login.

Office 2011 is not compatbile with Exchange 2003.
I suggest you post further Office related questions on Microsoft's own forums for their Mac software:
http://answers.microsoft.com/en-us/mac

I have a mac mini server with leopard, macbook pro, imac and iphone 4 i would like to use the server as the host for all mail, contacts, directories, intranet etc i would like all devices to have mail pushed using outlook as the prefered mail client?

can anyone shed some light on how to do this i am currently using the server as a file storage system but feel it can deliver far more; ideally i would like the following;
email to push to all devices once sent form one device all devices have a copy of the sent item
accounting software that is shared on the server
access the files and directories securely form anywhere
create and host an intranet site
any ideas of how to setup easily or step by step guides
help would be greatly appreciated
regards
rd

Start by getting DNS properly configured. If DNS isn't properly configured, most other services won't work right.
http://labs.hoffmanlabs.com/node/1436
http://labs.hoffmanlabs.com/node/1594
Then, the OS X server documentation will provide a wealth of knowledge on configuring services.
http://www.apple.com/server/macosx/resources/documentation.html

SSRS Report Manager error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"

Hi All,
I am getting error "Sys.WebForms.PageRequestManagerServerErrorException: An unknown error occurred while processing the request on the server. The status code returned from the server was: 500"
in one of my Test Environment when trying to run the SSRS 2012 report from report manager.
Any clue why it is happening.
Thanks Shiven:) If Answer is Helpful, Please Vote

Hi All,
Upon investigation found that there was no space (0 Byte is available) in E drive where underlying SQL DB is residing.
Once I cleared the space, report started working and above error was not displaying.
Thanks Shiven:) If Answer is Helpful, Please Vote

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server

I have a Mac on my home network and also a Systemline music server on same network. My PC was able to find the server but my MAC cannot. I can ping the server from the mac, but cannot actually connect . Also can't add the mac as a location from server, despite following the Systemline instructions that impy this can be done.
Can anyone please advise what I am doing wrong?

Hi LowLuster
Thanks for reply. I am not an expert on these sharing protocols but I think I have turned on SMB sharing but still wont connect. I tried adding netwrik drive by using cntrl K in finder and using smb\\network address but nothing. It is driving me mad!!

Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.

Hi,
I am using APEX version 4.2.1.00.08 with Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
I've developed an application, that was working fine till 3 days ago...
At the moment, I can log into the application but when I enter my ID/PW it takes me to my 1st page but then it runs for a mint or so (trying to load charts) and then generates following error message
No data received
Unable to load the webpage because the server sent no data.
Here are some suggestions:
Reload this webpage later.
Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data.
interestingly, I haven't changed anything within the application
I've tried it with Chrome Version 27.0.1453.116 m and IE 8.0...
with IE 8.0, it shows I/O Error in place of my graphs and get's a pop up message that displays "Error - error unknown"
The only thing that I can recall doing differently is logging via remote desktop connection, but I've used remote desktop in the past as well and it worked.
Please advice

anyone...?

Exchange 2010 OWA : TMG Error 12302 The server denied the specified Uniform Resource Locator (URL).

Hello All,
We are using TMG2010 (SP2, rollup4) for publishing Exchange 2010 OWA sites. The issue is that after every 10-24 hrs , the TMG server stops logging in OWA sites and start giving below error. Then we have to restart the server one two times or the problem
solves by itself.
I have also install a new server and it is also giving same behavior. On TMG server the exchange edge server and Forefront Protection for exchange is also installed.
Please help to solve this issue.
Denied Connection
-TMG05 5/21/2014 11:44:39 PM
Log type:
Web Proxy (Reverse)
Status: 12302 The server denied the specified Uniform Resource Locator (URL). Contact the server administrator.
Rule:
PRC-OWA
Source:
119.157.175.238:56971
Destination:
111.68.105.121:443
Request:
GET http://mail.parc.gov.pk/owa
Filter information:
Req ID: 0e947d98; Compression: client=Yes, server=No, compress rate=0% decompress rate=0% ; FBA cookie: exists=yes, valid=yes, updated=no, logged off=no, client type=public, user activity=yes
Protocol:
https
User:
anonymous
Additional information
Client agent: Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.2; WOW64; Trident/6.0)
Object source: (No source information is available.)
Cache info: 0x0
Processing time: 125 MIME type:

Hi,
A similar thread:
http://social.technet.microsoft.com/Forums/forefront/en-US/e8fdc1bd-f023-4804-ad02-67899d8c7347/the-server-denied-the-specified-uniform-resource-locator-errors12302-ashttp-error-code-of-500?forum=Forefrontedgegeneral
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Unable to find the server in the MMC

Hi,
I had installed a server in my fine and it was running fine for a month.But after restarting my machine,i was not able to find the server in the SAP MMC. Only "SAP" was visible and all the components could not be found.But all the files are there..can anyone suggest me what could be the problem and what should be done to rectify it.
regards,
Uma

Hi Uma,
Open your SAP MMC and from menu option select file->add/remove snapin...
Click on add button and then select "SAP Systems manager".
Click next on the next screen and then specify System ID, Instance (as hostname instanceNumber) and then click on add button.
It will add this system in the list in sapmmc.
Regards,
Bhavik

To save to the server, correct the invalid or missing required fields.

Similar Messages

Maybe you are looking for