Toad Error after installed Oracle Work Flow Builder

Hi,
I have using Toad 9.6.1 version. I installed newliy Oracle Work Flow Bulider 10g. After installed when i trying to open Toad it is giving Access Vioalation Error.
Please advice what may be the reason and how to correct it.
Thanks

Hi,
Did you use exsisiting oracle_home while installing workflow builder? if yes then may be reinstallation of toad is the soluiton.
Is toad throwing error at startup or when you fire any query? and what is complete error message...
Thanks,
JD

Similar Messages

Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110

eth0      Link encap:Ethernet HWaddr 00:15:17:F7:81:53
          inet addr:192.1.1.11 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::215:17ff:fef7:8153/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:220 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:0 (0.0 b) TX bytes:15868 (15.4 KiB)
          Memory:dfcc0000-dfce0000
eth1      Link encap:Ethernet HWaddr B8:AC:6F:92:C2:0C
          inet addr:192.1.1.9 Bcast:192.1.1.255 Mask:255.255.255.0
          inet6 addr: fe80::baac:6fff:fe92:c20c/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
          RX packets:263812 errors:0 dropped:0 overruns:0 frame:0
          TX packets:58 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:18959341 (18.0 MiB) TX bytes:9476 (9.2 KiB)
          Interrupt:169 Memory:dfbf0000-dfc00000
lo        Link encap:Local Loopback
          inet addr:127.0.0.1 Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING MTU:16436 Metric:1
          RX packets:1393 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1393 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4035655 (3.8 MiB) TX bytes:4035655 (3.8 MiB)Any help please. I am a first time Linux user.
Thanks
A/A

This looks like a follow up of Re: Error after installing Oracle Enterprise Linux (Release 5) on Dell T 110
Can you give more details what you are trying to do or trying to accomplish. Where are you trying to ping to?
It could be that you have not defined your gateway or DNS server for name to IP mapping. What is the output of
# netstat -rn
# cat /etc/resolv.conf

500 internal server error after installing oracle EBS 12.1.1

After installing oracle 12,1.1 using rapidwiz . the login page didn't open because of error 500 internal server,
i run autoconfig for database and i face that error below. how can i unlock that account and how can i connect sqlplus to oracle ebs.
thanks.
getConnectionUsingSID() -->
JDBC URL: jdbc:oracle:thin:@apps.appsdomain:1521:VIS
Exception occurred: java.sql.SQLException: ORA-28000: the account is locked

Please see:
R12: Clone fails with error "ORA-28000 The account is locked" (Doc ID 1114244.1)
APPS User Account Is Locked While Applying a Patch. Patch Fails With "ORA-28000" (Doc ID 420001.1)
Thanks,
Hussein

Hyperion errors after installing Oracle Database 11G

Hello,
The company I work for has a bunch of Oracle databases available, two which I connect to (use to connect to). I have multiple applications that I use to connect to these databases, Hyperion Interactive Reporting Studio 9.3.1 being one of them. I'm using Windows XP as my client.
I made the mistake of installing Oracle Database 11G Express Edition and now I cannot connect to any of the database using my applications, but I can connect to the same databases using SQL Developer. When I try connectiing using Hyperion, I get "SQL NATIVE ERROR [12504] SQL MESSAGE [[INTERSOLV][ODBC ORACLE 8 DRIVER][ORACLE 8][ORA-12504; TNS LISTERNER WAS NOT GIVEN THE SERVICE_NAME IN CONNECT DATA".
When connectiing using other company applications, which use the same database, i get "IM006: [INTERSOLV][ODBC ORACLE 8 DRIVER] DRIVERS SQLSETCONNECTATTRFAILED. UNABLE TO CONNECT TO DATABASE. CHECK USER NAME AND PASSWORD AND TRY AGAIN"
I'm assuming that I updated a driver or registry setting and I need to know how to reverse . I also copied a tnsnames and listerner from an associates computer and placed it in the same location on my computer, but this has not helped at all, even after rebooting the computer.
I even double checked and logged onto anothe computer and I can connect to the database using these same applications, so I definetly messed something up locally on my computer.
Any help is appreciated. Joe.

Probably you could solve odbc driver issues by removing the PATH entry from XE installation.
It looks something like:
Path=C:\oracle\oraclexe\app\oracle\product\11.2.0\server\bin;<remaining paths>
In system variabels settings, edit PATH to remove the "oraclexe" path and semicolon, leaving only <remaining paths>.
However, removing it will likely have an affect on XE usage. But that may be preferred over other apps working.
Edited by: orafad on Oct 12, 2011 2:55 PM

Getting FRM -18103 , and FRM 10039 error after installing oracle Froms

Hi,
I tried to install the Oracle Developer Suite 10g (10.1.2.0.2) on a Windows XP SP2 64 bit machine . After the installation, when I try to start the form, I get the following Error
FRM-18103: Failed to initialize the Development Environment
and
FRM -10039 Error.
Any suggestions ?
I checked the path
for the user variable path, the value is :
;C:\oracle\product\Developer\bin;C:\oracle\product\Developer\jdk\jre\bin\classic;C:\oracle\product\Developer\jdk\jre\bin;C:\oracle\product\Developer\jdk\jre\bin\client;C:\oracle\product\Developer\jlib;C:\oracle\product\Developer\jre\1.4.2\bin\client;C:\oracle\product\Developer\jre\1.4.2\bin;C:\app\feroz\product\11.2.0\dbhome_1\bin;C:\Program Files (x86)\SSH Communications Security\SSH Secure Shell;c:\apacheant\bin;C:\Program Files (x86)\Java\jre6\bin;C:\Sun\SDK\jdk\bin;C:\Sun\SDK\lib;c:\bea\jdk160_18\bin;%M2%
for the system variable path , the value is :
C:\oracle\product\Developer\bin;C:\oracle\product\Developer\jdk\jre\bin\classic;C:\oracle\product\Developer\jdk\jre\bin;C:\oracle\product\Developer\jdk\jre\bin\client;C:\oracle\product\Developer\jlib;C:\oracle\product\Developer\jre\1.4.2\bin\client;C:\oracle\product\Developer\jre\1.4.2\bin;C:\app\feroz\product\11.2.0\dbhome_1\bin;%SystemRoot%\system32;%SystemRoot%;%SystemRoot%\system32\WBEM;C:\oracle\product\ODAC\bin;C:\oracle\product\Client\bin;C:\oracle\product\Client\jre\1.4.2\bin\client;C:\oracle\product\Client\jre\1.4.2\bin;C:\oracle\product\10.1.0\Client_1\bin;C:\Business Objects\common\3.5\bin\NOTES\;C:\Business Objects\common\3.5\bin\NOTES\DATA\;C:\Program Files (x86)\Common Files\Roxio Shared\DLLShared\;C:\Program Files (x86)\Common Files\Roxio Shared\9.0\DLLShared\;C:\Program Files (x86)\cvsnt;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;c:\apacheant\bin;C:\bea\jdk160_18\bin;;C:\Program Files (x86)\WinMerge;C:\Business Objects\BusinessObjects Enterprise 11.5\win32_x86;C:\Brief\;C:\Program Files (x86)\QuickTime\QTSystem\
Thanks

I had the same error today. The problem was that I set up the ORACLE_HOME to a fixed value on my windows environment but have multiples Oracle homes (for a variety of products installed, like database, developer suite, etc.). So you need to delete or remove the ORACLE_HOME environment variable and problem solved. Try it and let me know. Cheers.

Help ! Error after install Oracle Database patch 9.2.0.5 on AIX

My database version on AIX server is 9.2.0.1, and I installed the 9.2.0.5 patch to update it .
But when i run the catpatch.sql, the out of process memory exception always occured even if i change the java_pool_size and share_pool_size both to 200M in init.ora file.
and when i run bi_checkconfig.sh to check weither the olap can be used, I got these errors:
Error: Olap API initialization failed; SQLException occurred when calling OlapiB
ootstrap procedure: ORA-37111: Message 37111 not found; product=RDBMS; facility
=ORA
; arguments: [ 0509-022 Cannot load module /u01/app/oracle/9.2.0.1/lib/libolapa
pi9.so.
0509-150 Dependent module /usr/lib/libC.a(ansi_64.o) could not be load
ed.
0509-152 Member ansi_64.o is not found in archive
0509-022 Cannot load module /usr/lib/libC.a.
0509-150 Dependent module /usr/lib/libC.a could not be loaded.]
ORA-06512: ÔÚ"SYS.OLAPIBOOTSTRAP", line 0
ORA-06512: ÔÚline 1
See G:\jdev904\bibeans\bi_checkconfig\bi_error.log
I reinstalled xlC , but the message is still there!
some one can help me ?

Why don't you (or your system administrator) simply do,what the message recommands?
The root user should execute '/usr/sbin/slibclean' You cannot remove the message itself. Run 'slibclean' and answer 'Y'. Unfortunately on the AIX platform it interrupts a silent installation.
http://publib.boulder.ibm.com/infocenter/aix/v6r1/index.jsp?topic=/com.ibm.aix.cmds/doc/aixcmds5/slibclean.htm
Werner

Login Page error after installing Oracle BI EE

Hi,
I finished installing OBIEE 10.1.3.2.1 with no errors in a Windows machine. I used the Basic installation using OC4J as Web server.
After finishing the install and restarting the server, all services are started but I get the following when I try to access the http://localhost:<port>/analytics or http://localhost:<port>/analytics/saw.dll?
web page:
The page cannot be found
The page you are looking for might have been removed, had its name changed, or is temporarily unavailable.
Please try the following:
Make sure that the Web site address displayed in the address bar of your browser is spelled and formatted correctly.
Can anyone help me to resolve this issue?
Thanks

Have you actually started the OC4J? Test that your webservice is running by access the root home page.

After installing oracle 10g on linux im getting this error

Hi,
Can any one give me any solution on i getting an error after installing oracle 10g on linux.
ERROR:-
/oraeng/app/oracle/product/10.2.0/bin/clscfg: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
Failed to initialize Oracle Cluster Registry for cluster

Hi, please ensure that both 'libclntsh.so.10.1' and 'libttsh10.so' has 755 permission and owned by Oracle.
That is the critical step.
After re-execute the root.sh file
Has been known to reset the permissions from the previous step - bug in some patch releases.
Suggest OP records permissions for those two files before running root.sh Or run root.sh before setting the permissions.

Error while installing Oracle 10g on Solaris 9 x86

Hi all,
I got several error after install oracle 10g. After I run the root.sh. It prompt :
Starting Oracle CSS service under init(1M)
Expecting the CRS daemons to be up within 120 seconds.
Giving up: Oracle CSS stack appears NOT to be running.
and when I start sqlplus, it prompt:
ERROR:
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Intel SVR4 UNIX Error: 2: No such file or directory
and following the error message prompt every minutes.
"oracle: (Oracle CSSD will be run out of init)"
"root: Failure in CSS initialization opening OCR."
I don't think reinstall oracle will solve my problem if I don't figure out what going wrong. Could anyone tell me what I need to do? Thanks very much for helping.
Cheers,
Alex

Check also if the t-bit is set:
[root@vtl1g121 ~]# ls -dl /tmp
drwxrwxrwt 11 root root 4096 Apr 10 11:44 /tmp
This is needed to mark the filesystem/directory as temporary.
Sometimes this can cause such problems also
Command: chmod +t /tmp

Oracle 10gr2 locally is not working after installing Oracle 11g

hi ,
Does anyone has any idea after installing oracle 11g in system, Oracle 10g locally is not working. I am getting below error.
Forms session <2> failed during startup: no response from runtime process

Generally this is because the software you install last updates the system environment variables with its information, thereby break products that use files with similar names. Specifically, look at PATH and ORACLE_HOME. Likely you will see that entries for your 11g installation will be displayed first. In order to use v10, you would need to change this or use script files to start executibles. For Forms runtime, be sure to properly set default.env to point to the desired PATH

Error while Installing Oracle Services for Microsoft Transaction Server

I downloaded "Oracle9i Database Release 2 Enterprise/Standard/Personal Edition for Windows NT/2000/XP" and installed the personal edition. It did not install successfully and gave this error message:
Error while Installing Oracle Services for Microsoft Transaction Server
The specified key was not found while trying to GetValue
- stop installation of all products.
- stop installation of this component only.
The installation of Oracle 9i Database was unsuccessful
The Integration tools and client installed just fine from the same download. Why didn't the database install successfully? All the other components seemed to install just fine and the database appeared to be created - but I could not open it and there was not start menu option for DBA Studio.
I am running Windows 2000 professional with Service Pack 3 on a 2 GHz Pentium4 machine with 512MB Rambus RAM, 32bit color graphics ATI All-in-Wonder card, about 40GB of disk space, a local peer-to-peer network via cat5 cable to another Win2k P3 machine, and Creative Soundblaster Audigy card. Do I need to adjust any network settings? Would it help or hinder if I installed MS IIS? WinNT has a Microsoft Transaction Server (MTS) but Win2k has COM+ instead; does that make a difference in terms of the installer looking for MTS? Do I need to configure COM+ in some special way / change settings?

HI Salman,
I am doing the following.
1. I am installing Oracle 10.2.01 Database(Not Client) on my windows Xp laptop. While installation i Choose the custom option and Check the Oracle Windows Interface. In that i check the "Install Oracle Services for Microsoft Transaction server" checkbox. The installation goes on fine till 99% and when it tries to install the
Oracle Services for Microsoft Transaction server it gives an error saying that "Microsoft Transaction server" was not found on the system.
I had previously installed the same on my laptop and it was working fine. but after uninstallation when i try to re install i get this problem.
If i go to the services.msc option in windows i still see the OracleMTSRecoveryService option even when i have uninstalled oracle. But when i try to start the services i get the following error
Could Not start the OracleMTSRecoveryService on the local computer.
Error 3: The system cannot find the file specified.
Any help on how to resolve this issue will be highly appreciated

Error while installing oracle 9i(9.2.0.1.0) on Red Hat Linux 8

hi
friends,
i'm getting error while installing Oracle 9i(9.2.0.1.0). this eror was came when linking process was going on. Error is as follow.
"Error in invoking target install of make file"
/home/oracle/product/9.2.0/plsql/lib/ins_plsql.mk"
/home/oracle/product/9.2.0/precomp/lib/ins_precomp.mk"
/home/oracle/product/9.2.0/sqlplus/lib/ins_sqlplus.mk"
/home/oracle/product/9.2.0/network/lib/ins_oemagent.mk"
pls. help me what to do?
Dharmesh

See this :
I saw this error only in connection with Oracle 9i (9.0.1) installation.
Edit the file $ORACLE_HOME/bin/genclntsh and change the following line (people have sent me emails pointing out that this also works for Mandrake 8.1 and Mandrake 8.2):
LD_SELF_CONTAINED="-z defs"
to read:
LD_SELF_CONTAINED=""
Then run the script $ORACLE_HOME/bin/genclntsh as the user "oracle" and not as the user "root". Also make sure you have all the Oracle environments set! (I got so many emails because people were not doing this)
$ su - oracle
$ $ORACLE_HOME/bin/genclntsh
Created /opt/oracle/product/9.0.1/lib/libclntst9.a
$
After that hit retry in the error popup. This always worked for me.
(I was told that this also works for SuSE 8.0.)
Here is Oracle's official solution for Oracle 9iR1 or 9iR1 iAS on RedHat 2.1 Advanced Server:
http://otn.oracle.com/software/products/oracle9i/files/binutils_readme.html
from: http://www.puschitz.com/OracleOnLinux.shtml
Hope it help you
Basem

Error while installing oracle 11g in centos 5.3

I got this error while installing oracle 11g in my laptop with centos 5.3
the error is:
./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 80 MB. Actual 76430 MB Passed
Checking swap space: must be greater than 150 MB. Actual 6000 MB Passed
Checking monitor: must be configured to display at least 256 colors
Could not execute auto check for display colors using command /usr/bin/xdpyinfo. Check if the DISPLAY variable is set. Failed <<<<Some requirement checks failed. You must fulfill these requirements before
continuing with the installation,
Continue? (y/n) [n] y
Ignoring required pre-requisite failures. Continuing...Preparing to launch Oracle Universal Installer from /tmp/OraInstall2010-03-07_12-09-48PM. Please wait ...[oracle@www database]$ Xlib: connection to ":0.0" refused by server
Xlib: No protocol specified
Exception in thread "main" java.lang.NoClassDefFoundError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at java.awt.Toolkit$2.run(Toolkit.java:821)
at java.security.AccessController.doPrivileged(Native Method)
at java.awt.Toolkit.getDefaultToolkit(Toolkit.java:804)
at com.jgoodies.looks.LookUtils.isLowResolution(Unknown Source)
at com.jgoodies.looks.LookUtils.<clinit>(Unknown Source)
at com.jgoodies.looks.plastic.PlasticLookAndFeel.<clinit>(PlasticLookAndFeel.java:122)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:242)
at javax.swing.SwingUtilities.loadSystemClass(SwingUtilities.java:1783)
at javax.swing.UIManager.setLookAndFeel(UIManager.java:480)
at oracle.install.commons.util.Application.startup(Application.java:758)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:164)
at oracle.install.commons.flow.FlowApplication.startup(FlowApplication.java:181)
at oracle.install.commons.base.driver.common.Installer.startup(Installer.java:265)
at oracle.install.ivw.db.driver.DBInstaller.startup(DBInstaller.java:114)
at oracle.install.ivw.db.driver.DBInstaller.main(DBInstaller.java:132)
please help me solve this...i am new to linux so can anyone give me detailed instructions.i tried using the installation guide and even though i got this error...

Firstly Thank you everyone for giving me your suggestions.
I tried installing oracle 11g in centos using Tim's tutorial and i all went fine initially i got the oracle 11g installation GUI and i got an error while starting database configuration.
The error was : TNS failed
and i got two options in that dialog box "ignore" and "abort"
after press ignore a few times.the installation finished successfully.
When i opened terminal and typed
sqlplus SYS as SYSDBA
it asked for password
when i gave the password again it showed the error TNS failed
kindly help me solve this.....

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

MGR-02150 error after installing 8.0.6

After installing Oracle 8.0.6 on either a 'fresh' Windows 2000
or Windows NT4 server, I get the error message "MGR-02150: an
unrecognized database version was encountered" all the time.
All other versions (from 8.0.5 to 9.0.1) work just fine, it's
just the 8.0.6 version that won't work.
Any help on this is appreciated! (So I can finally finish my
test-lab ;-))

I've tried to setup Ora806 again, and this time I didn't have a problem at all... Most likely, I forgot to configure a Local Net Service Name before I started working with the database I created.
I just started working with Oracle databases a few weeks ago, so there's a chance I missed just a tiny little thing during database setup ;-)

Toad Error after installed Oracle Work Flow Builder

Similar Messages

Maybe you are looking for