Too Many Concurrent AP Image Downloads

I have a new 5508 controller running 7.0.235.3 code in a lab setting, so currently there are no APs associated to it. I am trying to get a 3502 AP to join this controller. I configured the AP with the controller IP address and put it on the same subnet as the controller. The AP will boot, then gets to the point where is is trying to translate capwap-cisco-controller.domain. It seems to time out, then go through the whole process again. I checked the AP join statistics on the controller and it sees the AP try to join, but fails with the 'Too Many Concurrent AP Image Downloads' message. Since this is the only AP attempting to make a connection, I know this message is errant.
Any issues anyone is aware of or possibly a setting I overlooked?

So this error can be a little misleading. Is the license or eval license activated and in use to allow APs to join? If your number of supported APs is 0 often times I see this error. You can verify this by going into the Monitor section in the Web GUI and it will tell you how many Access Points are supported above the controller picture

Similar Messages

Too many concurrent AP image downloads, AP will not Join

peeps,
wonder if any of you have seen this before, trying to join an 1142 on a WLC_SRE version 7.4.
the AP can ping the controller and vice versa. In the controllers GUI: Monitor>Statisticc>AP join, I can find the mac of the AP that I am trying to get joined.
the details of this mac show:
Last error occurred:      Lwapp discovery request rejected
last occurred error reason: Too many concurrent AP image downloads
Last Join Timestamp:
any idea where I can increase the threshold for this?
I have probably tried once too often.
Thanks

sys info:
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.100.0
RTOS Version..................................... 7.4.100.0
Bootloader Version............................... 7.4.100.0
Emergency Image Version.......................... 7.4.100.0
Build Type....................................... DATA + WPS
System Name...................................... RINGWOOD_xxxxxxxxx_WLC
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1230
IP Address....................................... 192.168.7.1
System Up Time................................... 0 days 0 hrs 8 mins 46 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... AU - Australia
--More-- or (q)uit
State of 802.11b Network......................... Disabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 0
Memory Current Usage............................. Unknown
Memory Average Usage............................. Unknown
CPU Current Usage................................ Unknown
CPU Average Usage................................ Unknown
Burned-in MAC Address............................ E4:D3:F1:AF:9C:A0
Maximum number of APs supported.................. 0
Trying to join 1142N LAPs.    when getting the boot up process on the LAP, it endlessly loops in finding a valid WLC, although I have primed them to go to 192.168.7.1.
The WLC log shows:
*spamReceiveTask: Jan 23 09:38:26.863: #CAPWAP-3-DISC_MAX_DOWNLOAD: capwap_ac_sm.c:1716 Ignoring discovery request from AP ac:f2:c5:f3:ea:f0 - maximum number of downloads (0) exceeded
(every 10 seconds).
Will post the bootup as soon as I have access.

ORA-29278: SMTP transient error: 421 Too many concurrent SMTP

Hi Gurus,
I'm send emails by using UTL_MAIL in oracle 10g but some time I got this error
ORA-29278: SMTP transient error:
421 Too many concurrent SMTP connections;
please try again later
my database detail are as under
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
PL/SQL Release 10.2.0.1.0 - Production
CORE 10.2.0.1.0 Production
TNS for Linux: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
please help to resolve this issue.
Thanks in advance
sadiq

CREATE OR REPLACE PROCEDURE production_status_email
AS
v_sender VARCHAR2 (100) := '[email protected]';
v_recipients VARCHAR2 (100) := '[email protected]';
v_cc VARCHAR2 (200) := '[email protected]';
v_date date default sysdate-1;
v_subj VARCHAR2 (200) := 'Production Status of ' || to_date(v_date);
l_mesg LONG := NULL;
v_mtype VARCHAR2 (30) := 'text/html; charset=us-ascii';
l_greetings LONG := NULL;
l_table_heading LONG := NULL;
l_table_data LONG := NULL;
l_line_total LONG := NULL;
l_line_bpcs LONG := NULL;
l_table_footer LONG := NULL;
l_regards LONG := NULL;
n_row_counter NUMBER := 0;
n_sr_counter NUMBER := 1;
d_date DATE;
n_sum_frozen_quantity NUMBER;
n_sum_plan_quantity NUMBER;
n_sum_achieve_quantity NUMBER;
n_sum_price NUMBER;
n_sum_b_pieces NUMBER;
n_sum_b_price NUMBER;
BEGIN
l_greetings :=
'Dear sir,'
||'Following is Production Status of '
|| v_date
|| '
l_table_heading :=
'<table border = "1" cellpadding="1" width="100%" >
<tr bgcolor="CYAN">
<th align="LEFT" width="100">Main Resource</th>
<th align="LEFT" width="150">Sub Resource</th>
<th align="LEFT" width="60">UOM</th>
<th align="RIGHT" width="100">Frozen Quantity</th>
<th align="RIGHT" width="100">Plan Quantity</th>
<th align="RIGHT" width="100">Acheived Quantity</th>
<th align="RIGHT" width="100">Amount</th>
<th align="LEFT">Reason</th></tr>';
FOR mr IN (SELECT DISTINCT mrno, mresource
FROM image.production_status_v
WHERE pdate = TO_DATE (v_date)
ORDER BY 1)
LOOP
l_table_data :=
l_table_data
|| '<tr><th align="LEFT">'
|| mr.mresource
|| '</th>';
n_sr_counter := 1;
FOR sr IN (SELECT srno, sresource, uom, frozen_quantity, plan_quantity, achieve_quantity,price,
remarks
FROM image.production_status_v sr
WHERE mresource = mr.mresource
AND pdate = TO_DATE (v_date)
ORDER BY srno)
LOOP
IF n_sr_counter > 1
THEN
l_table_data := l_table_data || '</tr>';
l_table_data :=
l_table_data || '<tr><td></td>';
END IF;
l_table_data :=
l_table_data
|| '<td align="LEFT">'
|| sr.sresource
|| '</td>'
|| '<td align="LEFT">'
|| sr.uom
|| '</td>'
|| '<td align="RIGHT">'
|| TO_CHAR (sr.frozen_quantity, '99,999,999')
|| '</td>'
|| '<td align="RIGHT">'
|| TO_CHAR (sr.plan_quantity, '99,999,999')
|| '</td>'
|| '<td align="RIGHT">'
|| TO_CHAR (sr.achieve_quantity, '99,999,999')
|| '</td>'
|| '<td align="RIGHT">'
|| TO_CHAR (sr.price, '99,999,999')
|| '</td>'
|| '<td align="LEFT">'
|| sr.remarks
|| '</td>';
n_sr_counter := n_sr_counter + 1;
n_row_counter := n_row_counter + 1;
END LOOP;
l_table_data := l_table_data || '</tr>';
IF n_sr_counter > 2
THEN
SELECT SUM (frozen_quantity)
INTO n_sum_frozen_quantity
FROM image.production_status_v
WHERE mresource = mr.mresource AND pdate = TO_DATE (v_date);
SELECT SUM (plan_quantity)
INTO n_sum_plan_quantity
FROM image.production_status_v
WHERE mresource = mr.mresource AND pdate = TO_DATE (v_date);
SELECT SUM (achieve_quantity)
INTO n_sum_achieve_quantity
FROM image.production_status_v
WHERE mresource = mr.mresource AND pdate = TO_DATE (v_date);
SELECT SUM (price)
INTO n_sum_price
FROM image.production_status_v
WHERE mresource = mr.mresource AND pdate = TO_DATE (v_date);
l_line_total :=
'<tr bgcolor="#F0F0F0">'
|| '<th align="RIGHT" colspan="3">Total</th>'
|| '<th align="RIGHT">'
|| TO_CHAR (n_sum_frozen_quantity, '99,999,999')
|| '</th><th align="RIGHT">'
|| TO_CHAR (n_sum_plan_quantity, '99,999,999')
|| '</th><th align="RIGHT">'
|| TO_CHAR (n_sum_achieve_quantity, '99,999,999')
|| '</th><th align="RIGHT">'
|| TO_CHAR (n_sum_price, '99,999,999')
|| '</th>
</tr>';-- <td></td>
l_table_data := l_table_data || l_line_total;
END IF;
IF mr.mresource = 'Stitching' then
SELECT SUM(bqr)
into n_sum_b_pieces
from image.bundle2
WHERE to_date(bqr_date) = TO_DATE (v_date);
SELECT SUM(bqr * (SELECT ROUND (oe.price * er.rate)
FROM orderent oe, ex_rate er
WHERE oe.currency = er.currency
AND oe.order# =
SUBSTR (b2.order#, 1, 7)))
into n_sum_b_price
from image.bundle2 b2
WHERE to_date(bqr_date) = TO_DATE (v_date);
l_line_bpcs :=
'<tr bgcolor="#F0F0F0">'
|| '<th align="RIGHT" colspan="3">B Pieces</th>'
|| '<th align="RIGHT">'
|| ''
|| '</th><th align="RIGHT">'
|| ''
|| '</th><th align="RIGHT">'
|| TO_CHAR (n_sum_b_pieces, '99,999,999')
|| '</th><th align="RIGHT">'
|| TO_CHAR (n_sum_b_price, '99,999,999')
|| '</th>
</tr>';-- <td></td>
l_table_data := l_table_data || l_line_bpcs;
END IF;
END LOOP;
l_table_footer := '</table>';
--------------------------regards sectionstarts-
l_regards :=
'<Address> Regards, Information Systems
</address>';
-----------------------regards section ends;
l_mesg :=
l_mesg
|| l_greetings
|| l_table_heading
|| l_table_data
|| l_table_footer
|| l_regards;
IF n_row_counter > 0
THEN
UTL_MAIL.send (v_sender,
v_recipients,
v_cc,
NULL,
v_subj,
l_mesg,
v_mtype,
NULL
END IF;
END;
/

Internal Email recipient Status: 400 4.4.7 Message delayed, too many concurrent deliveries of this message at this time

Hi All,
I've read the other threads on this but not found one exactly like it. We are running Exchange 2010 SP3 Update 1. We recently sent out an internal email to a distribution that had a couple of dynamic DL's in it and a few regular DL's.
A lot of people got the initial email and others didn't until the following day. There was around 3000 or so users in that group. When investigating it with the message tracking log, a lot of users had "400 4.4.7 Message delayed, too many concurrent
deliveries of this message at this time" for the status.
Could this be to do with message throttling? I can find very little information on this on the Internet.
Thanks in advance,
Chris

This is not throttling.
How many HT servers do you have? What is the name of queue they all are residing?
Cheers,
Gulab Prasad
Technology Consultant
Thanks for your response Gulab,
I have two HT servers and I'm not sure what queue they were residing in as they eventually all went through. Is there any way I can tell this with the message tracking logs?
Thanks again,
Chris

421 Too many concurrent SMTP connections; please try again later.

Hi,
At first I send an email, it works fine. After i try again but this time, i get "421 Too many concurrent SMTP connections; please try again later". What do i have to do? Thanks
create or replace PROCEDURE SEND_MAIL
(name_in IN Varchar, surname_in IN Varchar, email_in IN Varchar)
IS
conn utl_smtp.connection;
BEGIN
conn := utl_smtp.open_connection ( 'mail.ppp.com', 25 ); -- SMTP database host and on port 25
utl_smtp.ehlo( conn, 'mail.ppp.com' );
utl_smtp.command(conn, 'auth login');
utl_smtp.command(conn,UTL_RAW.CAST_TO_VARCHAR2(utl_encode.base64_encode(utl_raw.cast_to_raw('oooo'))));
utl_smtp.command(conn,UTL_RAW.CAST_TO_VARCHAR2(utl_encode.base64_encode(utl_raw.cast_to_raw('oooo'))));
utl_smtp.mail( conn, '[email protected]' );
utl_smtp.rcpt( conn, email_in );
utl_smtp.data( conn,
'From: Rental' || utl_tcp.crlf ||
'To: ' || eremail_in || utl_tcp.crlf ||
'Subject: ' || 'Confirmation' ||
utl_tcp.crlf || 'Dear'||' '||name_in||' '||surname_in||','
||chr(13)||chr(10)||chr(13)||chr(10)||'Welcome'
utl_smtp.quit(conn);
END;
Message was edited by:
veledrom

Sounds like you have an exception in the code and not protecting the resource - which means resource leakage.
In your case, not closing TCP socket connections to the SMTP server. This then results in the SMTP server refusing to allow you more connections.
Or.. there is simply too many concurrent connections from different users/sessions/processes at the same time and it cannot service your connection.
PL/SQL does not specifically support a resource protection block. These are typically in the form of:
allocate resource;
try
use resource;
finally
release resource;The intention being that should sosmething go pear shape while using that resource, the resource is protected and released - thus preventing that resource from leaking all over the code and the server.
In PL/SQL we can only achieve this by creating an exception handler, releasing the resource (if allocated) and then re-raising the exception.
Suggest that you consider this approach whenever you allocate anything in PL/SQL - from a TCP socket handle to LOB locater or ref cursor.

Home Page loads slowly because of too many show/hide images.

I was asked to create a home page that displayed the correct product image in the background as you mouse over the menu item in the product portfolio navigation. I built the page using quite a few show/hide behaviors displaying the correct image. Now I have a HUGE home page that loads very slowly. Is there a better way to accomplish the same affect or do I need to scrap this idea and keep the images on the individual pages?
You can see this page here: http://www.keystonewalls.com
(mouseover the PRODUCT PORTFOLIO button and scroll down the menu to see the affect)
The client loves the fact that you don't have to leave the home page to get a good idea of what each product looks like but they aren't happy with how long it takes to load.
Help!

Yup. You've got some trimming to do.
http://www.websiteoptimization.com/services/analyze/
On a T1 connection (1.41 MB/sec) your home page takes 18.50 seconds to load. For dial-ups it's a very painful 395 seconds.
Page size: 1,943,483 bytes. Should be closer to 200 KB.
HTTP server requests: 41. This should be around 10.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

Error VC010 too many concurrent streams

Why do I get this message ?
There is only me online watching BT Sport as my Wife is watching anything else but football.
I was just starting the second half of Napoli v Roma when the VC010 struck.

Welcome to the forum. Is this any help?
You can click the white star next to this message if you think it was helpful.

Sendmail in Solaris 10 - 554 Too many connections from origin

I recently upgraded a server from Solaris 9 to Solaris 10. One of the apps that worked fine on S9 is now having a problem. I believe I have discovered the cause, but I'm not having any luck coming up with a solution.
The app in question queries a database for a list of e-mail addresses (all within our own domain) and then sends e-mail to each user. The messages are sent to our Barracuda firewall/spam filtering appliance, and it relays the messages on to our Exchange server.
The problem that arose after the upgrade is that sendmail is opening too many concurrent connections to the Barracuda, and the 'Cuda is replying with "554 Too many connections from origin".
I see that there is a sendmail configuration parameter "SingleThreadDelivery" that will only allow one connection to the Barracuda at a time. That appears to be overly restrictive, though.
My question is this: is there a way to tell sendmail to only allow some number of concurrent connections to the 'Cuda so as not to hit this limit?
Thanks,
Bill

Glen,
Thanks for the reply.
Yes, I did look at those, but my understanding was that those parameters effect inbound connection and in our case, the problem is that we want to limit the number of outbound connections.
As it turns out, the S10 upgrade was not the cause of this problem. At the same time that we upgraded we also added a second network interface (and IP address). Unknown to either myself or the current Barracuda admin, the old IP had been configured into the 'Cuda so that rate limits did not apply. The fix was to add the second IP, too (well actually, he decided to open it up to all of our servers' internal IPs).
Bill

Too many distributed transactions

I am programming an application with JDeveloper 10g and ADF Framework. It is a application that only queries data (no modifications). I created ViewObjects based on sql queries and an application module.
The problem is that is I execute that application for some time, I get the following error:
java.sql.SQLException: ORA-02042: too many distributed transactions
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.ttc7.TTIoer.processError(TTIoer.java:242)
     at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:554)
     at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java)
     at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:888)
     at oracle.jdbc.driver.OracleStatement.doExecuteQuery(OracleStatement.java:2346)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:2660)
     at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:457)
     at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:387)
     at oracle.jbo.server.QueryCollection.buildResultSet(QueryCollection.java:665)
As it is a query only program, i do not need transactions. How can fix this?
Thanks in advance

Hi,
this is information from metalink:
The ORA-2042 indicates that you should increase the parameter
distributed_transactions.
The ORA-2063 indicates that this must be done at the remote
database.
Explanation
If the distributed transaction table is full on either side of
the database link you get the error ORA-2042:
ORA-02042: "too many distributed transactions"
Cause: the distributed transaction table is full,
because too many distributed transactions are active.
Action: increase the INIT.ORA "distributed_transactions" or
run fewer transactions.
If you are sure you don't have too many concurrent
distributed transactions, this indicates an internal
error and support should be notified.
Instance shutdown/restart would be a workaround.
When the error is generated at the remote database it is
accompanied with an ORA-2063. In this case the parameter
distributed_transactions must be increased at the remote
database.
If there is no ORA-2063 the parameter distributed_transactions
must be increased at the local database.

ORA-02042: too many distributed transactions

1. I have been working on a portal application for several weeks.
2. Portal is installed in 1 instance and my data is in another instance.
3. I've had no ora-02042 problems in the devt environment set up that way.
4. I've recently migrated the application/pages to a test environment set up that way.
5. I've been working in the test environment for several days with no problems.
6. For some portlets on some pages I'm now getting:
<BLOCKQUOTE>quote:<HR>
Failed to parse query
Error:ORA-02042: too many distributed transactions
Error:ORA-02042: too many distributed transactions
ORA-02063: preceding line from
LINK_TO_TEST (WWV-11230) Failed to parse as PACID_SCHEMA -
select user_action.userid, action.name,
user_action.created_date,
user_action.created_by, action.action_id,
'del' del_link from user_action , action
where user_action.action_id =
action.action_id and user_action.userid
LIKE UPPER(:userid) order by USERID
ASC, NAME ASC, CREATED_DATE
ASC (WWV-08300)
<HR></BLOCKQUOTE>
7. I cannot find anything about this error in the db log files for either instance.
8. I've increased distributed transactions to 200 in the portal db and bounced
it. Still get the error.
9. No records in dba_2pc_pending or dba_2pc_neighbors in the portal instance.
10. I get the error in various reports and form LOVs at different times. Pages with a lot of portlets seem to be more prone to the error.
Here is a typical LOV error:
<BLOCKQUOTE>quote:<HR>
COMBOBOX LOV ERROR:
LOV: "ASIMM_1022.TITLE_LOV"
Parse Message: Parse as pre-set global: "PACID_SCHEMA".
Find Message: LOV is of type DYNAMIC (LOV based on SQL query).
Query: "select code display_column, code return_column from codes where table_id = 'OFFICER_TITLE' order by code"
wwv_parse.parse_as_user: ORA-02042: too many distributed transactions ORA-02063: preceding line from LINK_TO_TEST wwv_parse.parse_as_user: Failed to parse as PACID_SCHEMA - select code display_column, code return_column from codes where table_id = 'OFFICER_TITLE' order by code wwv_security.check_comp_privilege: Insufficient privileges. wwpre_utl.get_path_id: The preference path does not exist: ORACLE.WEBVIEW.PARAMETERS.217_USER_INPUT_ASIMM_5423428
<HR></BLOCKQUOTE>
Why are these select statements being interpreted as distributed transactions? Note:1032658.6 suggests I "USE SET TRANSACTION READ ONLY". Is this necessary? If so how?
What puzzles me is that this set up has been working fine for several days. I don't know of any changes to my environment apart from me increasing distributed transactions.
null

Hi,
this is information from metalink:
The ORA-2042 indicates that you should increase the parameter
distributed_transactions.
The ORA-2063 indicates that this must be done at the remote
database.
Explanation
If the distributed transaction table is full on either side of
the database link you get the error ORA-2042:
ORA-02042: "too many distributed transactions"
Cause: the distributed transaction table is full,
because too many distributed transactions are active.
Action: increase the INIT.ORA "distributed_transactions" or
run fewer transactions.
If you are sure you don't have too many concurrent
distributed transactions, this indicates an internal
error and support should be notified.
Instance shutdown/restart would be a workaround.
When the error is generated at the remote database it is
accompanied with an ORA-2063. In this case the parameter
distributed_transactions must be increased at the remote
database.
If there is no ORA-2063 the parameter distributed_transactions
must be increased at the local database.

Trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed

trying to download a movie on a laptop. tellls me i can't play it on that computer because my apple account has too many users. how do i see who is listed as a user so that i can delete one if it's not needed
please help
[email protected]

The list you saw that shows what drivers are available from Apple Software Update is based on what drivers are supplied by the vendor to Apple. So it would appear that HP has not provided Apple with a scanner driver for 10.9 (known as an ICA driver), or provided an update if one was available for a previous version of OS X, so that you can scan from Image Capture.
I checked the HP web site for your model and they don't show any scanner driver or scanning software. If there was a scanner driver, you would be able to use Vuescan.
As for the Scan button not working, the following is documented by HP
Scanning to the computer from the printer control panel is not available when you scan with Preview, Image Capture, or Printer browser methods. You must use HP Scan software to scan from the printer.
But there does not appear to be any version of HP Scan software available for 10.9. So unless someone else has some workaround, it seems that you won't be able to scan with this model of HP.

My ipod touch won't let me download apps, it tells me that I have too many photos and videos but I haven't got any photos or videos at all.

My ipod touch 4g keeps telling me that I have too many photos and videos and will not let me download apps. I have deleted all the photos and videos and some of my old apps but it keeps telling me the same message. I have tried to sync it with the pc and I have turned it on and off and I have reset it but nothing has worked. Please help! Thank you

Go to Setting>General>About. oow much avaialbe storage do you have?
Have you tried resetting the iPOd?
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

HT5312 I forgot my security question answers and answered wrong too many times so now it won't let me download anything even though I know my password, what do I do?

I forgot my security question answers and answered wrong too many times so now it won't let me download anything even though I know my password, what do I do?

You need to contact Apple to get the questions reset. Click here, phone them, and ask for the Account Security team, or fill out and submit this form.
(95618)

I tried to restore my iPod Touch after too many incorrect passcodes were tried. iTunes downloaded an update for 4 hours, but nothing changed with the iPod.

My daughter's friends tried to guess her password on her iPod Touch 4th generation too many times, and now she is locked out, and the iPod displays the message, "iPod is disabled. connect to iTunes." I connected it and tried to restore it. iTunes recognizes the iPod. iTunes said it needed to download an update, although everything on both the iPod and iTunes should be current. The update ran for over 4 hours, but when it ended, nothing else happened. The iPod is still disabled. How can I fix this? Thanks.

- Try a reset. Nothing will be lost.
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Next try a manual install. See:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
- Place in recovery mode and the retore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

Firefox crashes when too many images are opened

Okay, so, a problem that appeared in 4.0 for me, and hasn't gone away ever since.
The problem is basically summarized in the short description - whenever too many heavy images are in the browser's tabs simultaneously, it slows down to a halt; then sometimes as I scroll it fails to redraw the page, with black non-redrawn area increasing as I scroll and disappearing as I change tabs back and forth.
After a dozen seconds of such sad behaviour, the browser crashes.
Sometimes, however, things go better. And it just crashes.
The problem can be easily replicated with Save Images extension, say, on any photo hosting, or by opening
http://danvolodar.livejournal.com/friends/big_picture
It should be noted that 3.6 never had that problem, and opened pages where I aggregated thousands of images, - slowly, of course, but it ''did'' work. 4 and 5 do ''not''.

Go to the address '''about:crashes''' and tell us your latest crash IDs. We can then look at the data specific to your crash and have a better idea of what is causing the problem.
Or you can go to '''Start''' and type in the Vista search box '''%APPDATA%''' then click on '''Roaming''' then go to '''Mozilla>Firefox>Crash Reports>Submitted''' then open the .txt files and copy the Crash report ID that starts with '''bp-xxxxx-xxxx'''

Too Many Concurrent AP Image Downloads

Similar Messages

Maybe you are looking for