TOO MANY OPEN CURSORS PROBLEM ... PLEASE HELP

Hi,
my problem is the following :
I got data from a system in flat file format. ( ascii, semicolon separated )
I wrote mapping classes to different tables and insert via Oracle thin driver.
The data I got isn't 100% consistent. It may happen that there are double
records for tables whith unique indexes.
I catched the Exception like in the segment below
Statement insertStmnt = null;
try{
insertStmnt = connection.createStatement();
insertStmnt.execute(insertString);
connection.commit(); // autocommit is diabled
} catch ( Exception sql ) {
System.out.println(sql.toString());
connection.rollback();
insertStmnt.close();
The Problem : when receiving the SQLException ( UNIQUE CONSTRAINT VIOLATED )
the cursor remains open.
After exeeding the open_cursors system property ( Oracle )
no more data is loaded.
( the input files contains sometimes more than one million rows )
Any suggestion to my Mail
[email protected]
Thanks

Hi!
Now you only close your statement when you catch an error. You will have to close it if things works out fine as well:
Statement insertStmnt = null;
try{
insertStmnt = connection.createStatement();
insertStmnt.execute(insertString);
connection.commit(); // autocommit is diabled
insertStmnt.close();
} catch ( Exception sql ) {
System.out.println(sql.toString());
connection.rollback();
insertStmnt.close();
Good luck!
/Tale

Similar Messages

  • Report causes too many open cursors

    Hello there!
    I've got the following situation:
    I've a very heavy report used for generating our Users Manual. In Reports 6i this Report works fine, generating the Manual works.
    In 10g the Report starts, and formats about 240 pages (in 6i I can generate over 1000 pages and more with this report), and cancels with the message "too many open cursors".
    So I took a look at the open cursors:
    In 6i there are about 100 open cursors caused by this report; in 10g there are...uhm...in all cases to much for the max_open_cursors parameter of the database (standard value which is used by our application is 1000; increasing this to e.g. 5000 resulted in the same behaviour => too many open cursors).
    Checked the open cursors while running the report which showed the following behaviour:
    The report formats about 230 pages, and opens about 20 cursors (~30 sec.). for the next 10 sites the report opens the pending 980 cursors (~5 sec.), and stops formatting...
    So it seems the report server causes some bad recursion: When restarting the reports server and re-running the report, I get sometimes the following error:
    Mit Fehler beendet: REP-536870981: Interner Fehler REP-62204: Interner Fehler beim Schreiben des Bildes BandCombine: a row of the matrix does not have the correct number of entries, should be OpImage.getExpandedNumBands(source0.getSampleModel(), source0.getColorModel()) + 1.. REP-0069: Interner Fehler REP-50125: Exception abgefangen: java.lang.NullPointerException REP-0002: Unable to retrieve a string from the Report Builder message file. REP-536870981:
    or maybe the report server tries to paralellize some querys (as this report consists of about 5 querys)?
    As said - this is a very complex report (my colleague spent about 3 months of his life with creating it and that's not why he is a lamer in reports ;-)) so it's very hard to give you a repcase, but if anyone knows some advice like "edit the <repservername>.conf; append 'DO NEVER EVER PARALLELYZE QUERYS' to the config" or something this would be very useful ;-).
    many thanks
    best regards
    Christian

    I've now located the problem:
    The report consists of several querys based on a ref cursor; and this cursors are opend and not closed in 10g...
    I'll open a SR on metalink....
    best regards
    Christian

  • ORA-01000: maximum open cursors exceeded (please help / JDBC guru needed)

    ORA-01000: maximum open cursors exceeded
    I am getting this error when trying to execute 2,500 Sql DDL statements. I am executing the statement with:
    public boolean execute(String sql) ( like stmt.execute(sql); )
    After each execute() I close the statement ( like stmt.close() )
    I tried taking this a step further and decided to close and reopen the database connection after every 100 Sql statements processed and I still get this exception when continuing.
    ORA-01000: maximum open cursors exceeded
    Any help will be greatly appreciated. I need to figure how to close the cursors or how to finish processing all 2,500 statements. I do not have control over the init.ora file and can not increase the max cursors. I hope to figure out how to close the cursors so that no tweaking of the init.ora file is needed.
    ChrisTD

    Why dont you allocate dukes for this problem ???
    am getting this error when trying to execute 2,500 Sql DDL statements. I am executing the statement with:
    public boolean execute(String sql) ( like stmt.execute(sql); )
    After each execute() I close the statement ( like stmt.close() )
    What kind of DDL is that? are you using any cursor operations to fetch the data? What kind of query does this sql parameter contain?
    Look there is only 3 solutions for this kind of problem.
    1) shutdown the database and restart it.
    I dont think closing connection will shutdown the database as you
    told.
    2) shutdown the database access init.ora and increase the
    OPEN_CURSORS and then restart it.
    You told that you dont have access to init.ora.
    3) close every cursor that you open.(Probably you are not closing the cursor once you fetch the data).

  • TOO many OPEN CURSORS during loop of INSERT's

    Running ODP.NET beta2 (can't move up yet but will do that soon)
    I don't think it is related with ODP itself but probably on how .Net works with cursors. We have a for/next loop that executes INSERT INTO xxx VALUES (:a,:b,:c)
    statements. Apparently, when monitoring v$sysstat (current open cursors) we see these raising with 1 INSERT = 1 cursor. If subsequently we try to perform another action, we get max cursors exceeded. We allready set open_cursor = 1000, but the number of inserts can be very high. Is there a way to release these cursors (already wrote oDataAdaptor.dispose, oCmd.dispose but this does not help.
    Is it normal that each INSERT has it's own cursor ? they all have the same hashvalue in v$open_cursor. They seem to be released after a while, especially when moving to another asp.net page, but it's not clear when that happens and if it is possible to force the release of the (implicit?) cursors faster.
    Below is a snippet of the code, I unrolled a couple of function-calls into the code so this is just an example, not sure it will run without errors like this, but the idea should be clear (the code looks rather complex for what it does but the unrolled functions make the code more generic and we have a database-independend datalayer):
    Try
    ' Set the Base Delete statement
    lBaseSql = _
    "INSERT INTO atable(col1,col2,col3) " & _
    "VALUES(:col1,:col2,:col3)"
    ' Initialize a transaction
    lTransaction = oConnection.BeginTransaction()
    ' Create the parameter collection, containing for each
    ' row in the list the arguments
    For Each lDataRow In aList.Rows
    lOracleParamters = New OracleParameterCollection()
    lOracleParameter = New OracleParameter("luserid", OracleDbType.Varchar2,
    _ CType(aCol1, Object))
    lOracleParamters.Add(lOracleParameter)
    lOracleParameter = New OracleParameter("part_no", OracleDbType.Varchar2, _
    CType(lDataRow.Item("col2"), Object))
    lOracleParamters.Add(lOracleParameter)
    lOracleParameter = New OracleParameter("revision", OracleDbType.Int32, _
    CType(lDataRow.Item("col3"), Object))
    lOracleParamters.Add(lOracleParameter)
    ' Execute the Statement;
    ' If the execution fails because the row already exists,
    ' then the insert should be considered as succesfull.
    Try
    Dim aCommand As New OracleCommand()
    Dim retval As Integer
    'associate the aConnection with the aCommand
    aCommand.Connection = oConnection
    'set the aCommand text (stored procedure name or SQL statement)
    aCommand.CommandText = lBaseSQL
    'set the aCommand type
    aCommand.CommandType = CommandType.Text
    'attach the aCommand parameters if they are provided
    If Not (lOracleParameters Is Nothing) Then
    Dim lParameter As OracleParameter
    For Each lParameter In lOracleParameters
    'check for derived output value with no value assigned
    If lParameter.Direction = ParameterDirection.InputOutput _
    And lParameter.Value Is Nothing Then
    lParameter.Value = Nothing
    End If
    aCommand.Parameters.Add(lParameter)
    Next lParameter
    End If
    Return
    ' finally, execute the aCommand.
    retval = cmd.ExecuteNonQuery()
    ' detach the OracleParameters from the aCommand object,
    ' so they can be used again
    cmd.Parameters.Clear()
    Catch ex As Exception
    Dim lErrorMsg As String
    lErrorMsg = ex.ToString
    If Not lTransaction Is Nothing Then
    lTransaction.Rollback()
    End If
    End Try
    Next
    lTransaction.Commit()
    Catch ex As Exception
    lTransaction.Rollback()
    Throw New DLDataException(aConnection, ex)
    End Try

    I have run into this problem as well. To my mind
    Phillip's solution will work but seems completey unnecessary. This is work the provider itself should be managing.
    I've done extensive testing with both ODP and OracleClient. Here is one of the scenarios: In a tight loop of 10,000 records, each of which is either going to be inserted or updated via a stored procedure call, the ODP provider throws the "too many cursor errors at around the 800th iteration. With over 300 cursors being open. The exact same code with OracleClient as the provider never throws an error and opens up 40+ cursors during execution.
    The applicaation I have updates a Oracle8i database from a DB2 database. There are over 30 tables being updated in near real time. Reusing the command object is not an option and adding all the code Phillip did for each call seems highly unnecessary. I say Oracle needs to fix this problem. As much as I hate to say it the microsoft provider seems superior at this point.

  • Runtime Error - DBIF_RSQL_INVALID_RSQL - Too many OPEN CURSOR

    When I try to train a Decision Tree Model via an APD process in RSANWB, I get a runtime error when my model is configured with too many parameter fields or too many leaves (with 2 leaves it works, with more it fails).
    By searching SAP Notes I see that there are many references to this kind of runtime errors. But no note on occurences of it in RSANWB / RSDMWB .
    Any information on this anyone?
    Claudio Ciardelli
    Runtime Errors         DBIF_RSQL_INVALID_RSQL
    Date and Time          29.07.2005 16:19:21
    |ShrtText                                                                                |
    |    Error in RSQL module of database interface.                                                   |
    |What happened?                                                                                |
    |    Error in ABAP application program.                                                            |
    |                                                                                |
    |    The current ABAP program "SAPLRS_DME_DECISION_TREE_PRED" had to be terminated                 |
    |     because one of the                                                                           |
    |    statements could not be executed.                                                             |
    |                                                                                |
    |    This is probably due to an error in the ABAP program.                                         |
    |                                                                                |
    |Error analysis                                                                                |
    |    The system attempted to open a cursor for a SELECT or OPEN CURSOR                             |
    |    statement but all 16 cursors were already in use.                                             |
    |    The statement that failed accesses table "/BIC/0CDT000030 ".                                  |
    |    The erroneous statement accesses table "/BIC/0CDT000030 ".                                    |
    |Trigger Location of Runtime Error                                                                 |
    |    Program                                 SAPLRS_DME_DECISION_TREE_PRED                         |
    |    Include                                 LRS_DME_DECISION_TREE_PREDU06                         |
    |    Row                                     103                                                   |
    |    Module type                             (FUNCTION)                                            |
    |    Module Name                             RS_DME_DTP_EVALUATE                                   |
    |Source Code Extract                                                                               |
    |Line |SourceCde                                                                                |
    |   73|* Prepare for Data evaluation                                                               |
    |   74|  CATCH SYSTEM-EXCEPTIONS OTHERS = 15.                                                      |
    |   75|    CREATE DATA ref TYPE (i_enum_dbtab).                                                    |
    |   76|    ASSIGN ref->* TO <fs_wkarea>.                                                           |
    |   77|    ASSIGN COMPONENT gv_class_dbposit OF STRUCTURE                                          |
    |   78|                      <fs_wkarea> TO <fs_class>.                                            |
    |   79|    CREATE DATA ref TYPE TABLE OF (i_enum_dbtab).                                           |
    |   80|    ASSIGN ref->* TO <ft_data>.                                                             |
    |   81|                                                                                |
    |   82|  ENDCATCH.                                                                                |
    |   83|  IF sy-subrc = 15.                                                                         |
    |   84|*   Error on Assignment.                                                                    |
    |   85|    CALL FUNCTION 'RS_DME_COM_ADDMSG_NOLOG'                                                 |
    |   86|      EXPORTING                                                                             |
    |   87|        i_type    = 'E'                                                                     |
    |   88|        i_msgno   = 301                                                                     |
    |   89|        i_msgv1   = 'EVALUATION_PHASE'                                                      |
    |   90|      IMPORTING                                                                             |
    |   91|        es_return = ls_return.                                                              |
    |   92|    APPEND ls_return TO e_t_return.                                                         |
    |   93|    EXIT.                                                                                |
    |   94|  ENDIF.                                                                                |
    |   95|                                                                                |
    |   96|* For the un-trained Rec-Ids, evaluate.....                                                 |
    |   97|  REFRESH lt_recinp.                                                                        |
    |   98|  APPEND LINES OF i_t_records TO lt_recinp.                                                 |
    |   99|  SORT lt_recinp .                                                                          |
    |  100|* Open Cursor..                                                                             |
    |  101|  DATA: l_curs TYPE cursor.                                                                 |
    |  102|  DATA: l_psize TYPE i VALUE 10000.                                                         |
    |>>>>>|  OPEN CURSOR WITH HOLD l_curs FOR                                                          |
    |  104|   SELECT * FROM (i_enum_dbtab)                                                             |
    |  105|     WHERE rsdmdt_recid NOT IN                                                              |
    |  106|        ( SELECT rsdmdt_recid FROM                                                          |
    |  107|             (i_learn_tab) ).                                                               |
    |  108|                                                                                |
    |  109|*  Start Fetch...                                                                           |
    |  110|  DO.                                                                                |
    |  111|    FETCH NEXT CURSOR l_curs                                                                |
    |  112|      INTO CORRESPONDING FIELDS OF TABLE <ft_data>                                          |
    |  113|      PACKAGE SIZE l_psize.                                                                 |
    |  114|    IF sy-subrc NE space.                                                                   |
    |  115|      EXIT.                                                                                |
    |  116|    ENDIF.                                                                                |
    |  117|                                                                                |
    |  118|*     Process records...                                                                    |
    |  119|    LOOP AT <ft_data> ASSIGNING <fs_wkarea>.                                                |
    |  120|                                                                                |
    |  121|*     Call Prediction Function.                                                             |
    |  122|      CALL FUNCTION 'RS_DME_DTP_PREDICT_STRUCTURE'                                          |

    Hi Claudio,
    well the message is very clear and I think in your case you need to split your model into a few somehow equal models, each not having more than 2 leaves.
    Another option might be to do more things serially instead of parallel.
    Hope it helps
    regards
    Siggi

  • Too many open cursors

    Could someone help me understand this problem, and how to remedy it? We're getting warnings as the number of open cursors nears 1200. I've located the V$OPEN_CURSOR view, and after investigating it, this is what I think:
    Currently:
    SQL> select count(*)
    2 from v$open_cursor;
    COUNT(*)
    535
    1) I have one session open in the database, and 40 records in this view. Does that mean my cursors are still in the cursor cache?
    2) Many of these cursors are associated with our analysts, and it looks like they are likely queries TOAD runs in order to gather meta-data for the interface. Can I overcome this?
    3) I thought that the optimizer only opened a new cursor when a query that didn't match one in the cache was executed. When I run the following, I get 105 SQL statements with the same hash_value and sql_id, of which, they total 314 of the 535 open cursors (60% of the open cursors):
    SQL> ed
    Wrote file afiedt.buf
    1 SELECT COUNT(*), SUM(cnt)
    2 FROM (SELECT hash_value,
    3 sql_id,
    4 COUNT(*) as cnt
    5 FROM v$open_cursor
    6 GROUP BY hash_value, sql_id
    7* HAVING COUNT(*) > 1)
    SQL> /
    COUNT(*) SUM(CNT)
    104 314
    4) Most of our connections in production will use Oracle Forms. Is there something we need to do in order to get Forms to use bind variables, or will it do so by default?
    Thanks for helping me out with this.
    -Chuck

    CURSOR_SHARING=EXACT
    OPEN_CURSORS=500
    CURSOR_SHARING
    From what I've read, cursor sharing is always in effect, although we have the most conservative method set. So I'm not sure how this affects things. Several identical queries are being submitted in several separate cursors.
    OPEN_CURSORS
    This value corresponds with the maximum number of cursors allowed for a single session. We're using shared servers, so I'm exactly sure if this is still 'per session' or 'per shared server', but 500 should be more than enough.
    It sounds like you're suggesting that a warning is being triggered based upon our init params. If that's the case, then what are people seeing as a limit for cursors on a 2-CPU Linux box with 2G of memory?
    -Chuck

  • "Too many activations" NOT TRUE, please help

    How can I activate Indesign? I get a too-many-activations error, but there is no way to deactivate the copy that I am replacing. The Mac it was on went down, and the hard drive is not readable. I installed from the original disc and put in the serial# as requested. There is no option in the app to contact Adobe. When I use the website, I get an endless loop of click-around that ends at contact-support. Click that and it sends me back to the start. This should be a simple phone call with an easy to find number. I eventually found, by accident, the chat feature, but it was and is, unavailable. Please offer some real-world advice on how to get this fixed. I don't really want to go back to Quark...activation

    Yes, call support to reset activations server-side. The numbers are prominently featured on the support and store pages.
    Mylenium

  • Too many open cursors exception caused by LRS Iterator

    Using Kodo4.1.4 with Oracle10, and Large Result Set Proxies, I encountered
    the error "maximum number of open cursors exceeded".
    It seems to have been caused because of incomplete LRSProxy iterators within
    the context of a single PersistenceManager. These iterators were over
    collections obtained by reachability, not directly from Queries or Extents.
    The Iterator is always closed, but the max-cursors exception still occurs.
    Following is a pseudocode example of the case... Note that if the code is
    refactored to remove the break; statement, then the program works fine, with
    no max-cursors exception.
    Any suggestions?
    // This code pattern is called hundreds of times
    // within the context of a PersistenceManager
    Collection c = persistentObject.getSomeCollection(); // LRS Collection
    Iterator i = c.iterator()
    try
    while(i.hasNext())
    Object o = i.next();
    if (someCondition)
    break; // if this break is removed, everything is fine
    finally
    KodoJDOHelper.close(i);
    }

    XSQL Servlet v. 0.9.9.1
    Netscape Enterprise / JRUN 2.3.3 / Windows NT
    I modified the document demo (insert request).
    The XSQL document:
    <?xml version="1.0"?>
    <?xml-stylesheet type="text/xsl" href="newdocinsform.xsl"?>
    <page connection="demo" xmlns:xsql="urn:oracle-xsql">
    <xsql:insert-request table="xmlclob" transform="newdocins.xsl"/>
    <data>
    <xsql:query null-indicator="yes" max-rows="4">
    select id, doc
    from xmlclob
    order by id desc
    </xsql:query>
    </data>
    </page>
    The difference between this and your demo is the table: the table xmlclob has
    ID NUMBER and DOC CLOB. No constraints were enforced, so I was inserting the ID and the DOC. Upon page reload, several rows with the same values were inserted.
    I had a similar problem in the previous release.
    As a general question, how can I configure the XSQLConfig file for optimal performance?
    Although you provided default values, I'm not sure how much is necessary for connection pooling.

  • ORA-01000: Too many open cursors -- Need Help

    Hi All,
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    PL/SQL Release 11.1.0.7.0 - Production
    I am getting error ora-01000 for  the following procedures gather stats
    Could you please guide how to get-rid-off this error.
    thanks in advance;
    CREATE OR REPLACE PROCEDURE SHEMA_NAME ANALYZE_TABLES IS
       rec_table_name   VARCHAR2 (30);
       CURSOR c1
       IS
          SELECT table_name
            FROM USER_tables;  ------ 18000 table for this cursor
    BEGIN
       OPEN c1;
       LOOP
          FETCH c1 INTO rec_table_name;
          EXIT WHEN c1%NOTFOUND;
          -- block was hereÿÿÿ
          BEGIN
             DBMS_STATS.
             GATHER_TABLE_STATS (
                OWNNAME            => 'SHEMA_NAME',
                TABNAME            => rec_table_name,
                PARTNAME           => NULL,
                ESTIMATE_PERCENT   => 30,
                METHOD_OPT         => 'FOR ALL COLUMNS SIZE AUTO',
                DEGREE             => 5,
                CASCADE            => TRUE);
          END;
       END LOOP;
       CLOSE c1;
    EXCEPTION
       WHEN OTHERS
       THEN
          raise_application_error (
             -20001,
             'An error was encountered - ' || SQLCODE || ' -ERROR- ' || SQLERRM);
    END;

    Look at the following:
    SQL> begin
      2          raise no_data_found;
      3  end;
      4  /
    begin
    ERROR at line 1:
    ORA-01403: no data found
    ORA-06512: at line 2
    The error code the caller executing this code receive is -01403. A unique error number that has a known and specific meaning.
    In addition, the error stack tells the caller that this unique error occurred on line 2 in the source code.
    The caller knows EXACTLY what the error is and where it occurred.
    SQL> begin
      2          raise no_data_found;
      3  exception when OTHERS then
      4          raise_application_error(
      5                  -20000,
      6                  'oh damn some error happened. the error is '||SQLERRM
      7          );
      8  end;
      9  /
    begin
    ERROR at line 1:
    ORA-20000: oh damn some error happened. the error is ORA-01403: no data found
    ORA-06512: at line 4
    In this case the caller gets the error code -20000. It is meaningless as the same error code will be use for ALL errors (when OTHERS). So the caller will never know what the actual real error is.
    For the caller to try and figure that out, it will need to parse and process the error message text to look for the real error code. A very silly thing to do.
    In addition, the error stack says that the error was caused by line 4 in the code called.. except that this is the line that raised the meaningless generic error and not the actual line causing the error.
    There are 3 basic reasons for writing an exception handler:
    - the exception is not an error
    - the exception is a system exception (e.g. no data found) and needs to be turned into meaningful application exceptions (e.g. invoice not found, customer not found, zip code not found, etc)
    - the exception handler is used as a try..finally resource protection block (which means it re-raises the exception)
    If your exception handler cannot tick one of these three reasons for existing, you need to ask yourself why you are writing that handler.

  • STARTING DATABASE : PROBLEM OF Linux Error: 23: Too many open files in syst

    Hi everybody,
    I am running an RMAN script and get this error,
    9> @/u01/app/oracle/admin/devpose/backup/configuration.rcv
    RMAN> ###################################################################
    2> # Configuration file used to set Rman policies.
    3> #
    4> ###################################################################
    5>
    6> CONFIGURE DEFAULT DEVICE TYPE TO DISK;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of configure command at 08/26/2009 20:03:30
    RMAN-06403: could not obtain a fully authorized session
    ORA-01034: ORACLE not available
    RMAN> CONFIGURE RETENTION POLICY TO REDUNDANCY 1;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of configure command at 08/26/2009 20:03:30
    RMAN-06403: could not obtain a fully authorized session
    ORA-01034: ORACLE not available
    RMAN> #CONFIGURE RETENTION POLICY TO RECOVERY WINDOW OF 7 DAYS;
    2> CONFIGURE DEVICE TYPE DISK PARALLELISM 2;
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of configure command at 08/26/2009 20:03:30
    RMAN-06403: could not obtain a fully authorized session
    ORA-01034: ORACLE not available
    RMAN>
    RMAN> CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/u01/app/oracle/backup/db/ora_df%t_s%s_s%p';
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of configure command at 08/26/2009 20:03:30
    RMAN-06403: could not obtain a fully authorized session
    ORA-01034: ORACLE not available
    But this problem is understandable, as the database is not running. The main problem why database is not running, I have found the reason but do not understand how to solve the problem.
    Since, the database was not running, I tried to startup the database, I then came across the following which is my problem (Why so many files are open? Linux OS error says too many files open. See below,
    SQL> conn /as sysdba
    Connected to an idle instance.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 419430400 bytes
    Fixed Size 779516 bytes
    Variable Size 258743044 bytes
    Database Buffers 159383552 bytes
    Redo Buffers 524288 bytes
    Database mounted.
    ORA-00313: open failed for members of log group 2 of thread 1
    ORA-00312: online log 2 thread 1: '/u01/app/oracle/oradata/devpose/redo02.log'
    ORA-27041: unable to open file
    Linux Error: 23: Too many open files in system
    Can anybody has run into such problem and guide me to a solution, please?
    Thanks

    Hi,
    yes, this DB was functioning o.k. this configuration script was part of RMAN daily backup.
    Last night the backup failed. So, when I opened "Failed job" in the EM, I saw this type of messages.
    That was the starting point. Gradually, I tried to narrow down on to the actual problem and found the findings as I have posted.
    One way of sovling problem, I thought that, all these processes I would kill and then try to open the database, it might startup. However, that wouldnot lead me in ensuring this won't occur again.
    That's why I am trying to understand why it should open, so many processes (why spawn so many .flb files?) Any thoughts you have around this?
    I will try to restart the OS as the last resort.
    Thanks for your help and suggestions.
    Regards,

  • I am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    i am using firefox 3.6.17 i upgraded it to 4.1.but it does not work properly sometimes it opens every website and most of the time it does not work . so what is the problem please help . thank you

    Did you check your security software (firewall)?
    A possible cause is security software (firewall) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process.
    See:
    * [[Server not found]]
    * [[Firewalls]]

  • Hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

    hi guys i have an ipad 1 and when i plug it in to my macbook pro picasa opens up and show its name but when i open itunes i cant find the name, ive been working my head out to solve the problem please help me:(

    Pay no attention to iinami, the amount of replies to people saying their handsets must have been jailbroken everytime iTunes throws out an error is tremendous. (Clearly you don't need to have any real knowledge to get to level 3 on these forums, let's hope apple's geniuses know a lot more than some of their customers.)
    http://support.apple.com/kb/TS3694
    Solution below.
    Error 9
    This error occurs when the device unexpectedly loses its USB connection with iTunes. This can occur if the device is manually disconnected during the restore process. This issue can be resolved by performing USB troubleshooting, using a different USB dock-connector cable, trying another USB port, restoring on another computer, or by eliminating conflicts from third-party security software.

  • Getting ORA-06512: at "SYS.UTL_HTTP", line 1022 ORA-29270: too many open

    hi
    I am getting the following error while calling the procedure in the batch process
    ORA-06512: at "SYS.UTL_HTTP", line 1022
    ORA-29270: too many open HTTP requests
    Could you please help me on this? As this is getting affected in the live databases.
    ORA-06512: at "SYS.UTL_HTTP", line 1022
    ORA-29270: too many open HTTP requests
    CREATE OR REPLACE PROCEDURE Send_To_Spg(
    PTRANSACTION_ID               IN          VARCHAR2,
    PCHANNEL_TYPE               IN VARCHAR2 DEFAULT NULL,
    PCSS_ORDER_NUMBER          IN VARCHAR2 DEFAULT NULL,
    PTELEPHONE_NUMBER          IN VARCHAR2 DEFAULT NULL,
    PSCENARIO_TYPE               IN VARCHAR2 DEFAULT NULL,
    PCUSTOMER_REQUIRED_DATE IN          VARCHAR2 DEFAULT NULL,
    PCUSTOMER_REQUIRED_TIME IN          VARCHAR2 DEFAULT NULL,
    PCANCELLATION_REASON     IN          VARCHAR2 DEFAULT NULL,
    PCANCELLATION_NOTES          IN          VARCHAR2 DEFAULT NULL,
    PSMPF_RETENTION               IN          VARCHAR2 DEFAULT NULL,
    PEMERGENCY_WINBACK          IN          VARCHAR2 DEFAULT NULL,
    PCSS_PROJECT_ID               IN          VARCHAR2 DEFAULT NULL,
    PCSS_ORDER_NOTES          IN          VARCHAR2 DEFAULT NULL,
    PREASON_FOR_CESSATION     IN          VARCHAR2 DEFAULT NULL,
    P_RESPONSE                    OUT VARCHAR2,
    PSMART_USER_ID               IN VARCHAR2 DEFAULT NULL,
    PORACLE_ERROR               OUT VARCHAR2,
    PORACLE_ERROR_MESSAGE     OUT          VARCHAR2,
    PRESPONSE_TIME               OUT          NUMBER,
    PDATA_TRANSFER_STATUS     OUT          VARCHAR2)
    IS
    v_scenario_type               VARCHAR2(20); -- Varialble to Hold Time Out of every request to SPG
    v_transaction_time          NUMBER;          -- Total time in which Request to SPG was processed
    v_record_inserted_at     DATE;          -- Date/Time about the record insertion to the Error Handler
    v_start_time               NUMBER;          -- Variable to hold Start Time for calculationg Transaction Time
    v_url                         VARCHAR2(32767);-- URL to use when sending data to SPG
    vtransaction_id               VARCHAR2(18); -- Variable to hold Transaction ID for the request
    v_buffer                    VARCHAR2(32760);-- Variable to read response from the SPG interface
    v_timeout                    PLS_INTEGER; -- Time Out for each Transaction
    v_oracle_err_msg          VARCHAR2(600); -- Variable to hold Oracle Error Message
    v_resp                UTL_HTTP.RESP; -- Response Object
    v_req                UTL_HTTP.REQ; -- Request Object
    v_userid_pwd               SMT_ORACLE_PARAMETERS%ROWTYPE; --Variable declared to contain User ID & Password
    vl_RetCode          VARCHAR2(5000);
    vl_std_returnCode     VARCHAR2(3000);
    --PDATA_TRANSFER_STATUS Holds the Data Transfer Status which can have possible values as
    -- N => Data Has not been sent to SPG
    -- Y => Received Successful response from SPG
    -- F => On the First try to Send data to SPG Oracle Error Occured or response from SPG was a faulure
    -- S => On the Second try to Send data to SPG Oracle Error Occured or response from SPG was a faulure
    -- T => Data Has been transferred to the Error Log Table
    -- X => Data need not be transfered to Error Log Table.
    --Location of the timeout, URL & User Id & Password in Standing Data.
    c_url_stopwlr SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_WLR';-- Stop WLR URL
    c_url_cancelown SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_OWN';-- Cancel own URL
    c_url_cancelother SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_OTH';-- Cancel other URL
    c_url_amendcrd SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPG_CRD';--Amend CRD URL
    c_spg_useridpwd SMT_ORACLE_PARAMETERS.PARAMETER_CODE%TYPE:='SPGIDPWD'; --Contains user id and pwd
    ctimeout smt_parameters.parameter_code%TYPE:='SPGTO'; --This holds the timeout parameter
    BEGIN
         --In case the calling batch process can pass this value this SQL read will not be required & can be deleted
         --Read data transfer status for the transaction Id
         SELECT data_transfer_status INTO PDATA_TRANSFER_STATUS     FROM SPG_INTERFACE_TABLE
         WHERE transaction_id     =     PTRANSACTION_ID;
         --Record the start time
         v_start_time:=DBMS_UTILITY.GET_TIME;
         --If Data transfer status is S then send the record to error handler
         IF PDATA_TRANSFER_STATUS = 'S' THEN
              Error_Handler(PTRANSACTION_ID,PSMART_USER_ID,PORACLE_ERROR,PORACLE_ERROR_MESSAGE,v_record_inserted_at,PDATA_TRANSFER_STATUS);
         ELSE
         --In case Data Tranfer Status is something other than S then send the request to SPG
              --Initialise other variables which will be populated during the journey
              P_RESPONSE                    :=     '';
              PORACLE_ERROR               :=     NULL;
              PORACLE_ERROR_MESSAGE     :=     NULL;
              PRESPONSE_TIME               :=     0;
         --Read timeout parameter from standing data.
              BEGIN
                   SELECT VALUE INTO v_timeout FROM smt_parameters WHERE parameter_code=ctimeout;
              EXCEPTION
                   WHEN NO_DATA_FOUND THEN
                   v_timeout:=30;
              WHEN OTHERS THEN
                   v_timeout:=30;
              END;
         -- Construct the URL for Stop WLR Scenario
              IF PSCENARIO_TYPE = 'STOP_WLR' THEN
                   BEGIN
                   -- Read the Initial URL from Standing Data
                   SELECT VALUE
                        INTO v_url
                        FROM SMT_ORACLE_PARAMETERS
                        WHERE parameter_code = c_url_stopwlr
                        AND host_id = ( SELECT host_id
                                                      FROM SMART_HOSTS A
                                                      WHERE EXISTS ( SELECT 1
                                                                     FROM DB_PARAMETERS b
                                                                     WHERE A.hostname = b.hostname
                                                                     AND A.database_id = b.database_id));
                   --handle unforseen exception
                   EXCEPTION
                   WHEN NO_DATA_FOUND THEN
                        v_url:='Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_winback_details'; --After testing the same, URL will be fetched from the Query
                   WHEN OTHERS THEN
                        v_url:='Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_winback_details'; --After testing the same, URL will be fetched from the Query
                   END;
                   --construct the URL depending on the parameters to be passed to the url
                   v_url := v_url || '?';
                   v_url := v_url || 'p_data_entered=' || Smart_Urlencode('xmloverhttp') || '&';
                   v_url := v_url || 'p_channel_type=' || Smart_Urlencode(PCHANNEL_TYPE)|| '&';
                   v_url := v_url || 'p_css_start_order_no=' || Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
                   v_url := v_url || 'p_tel_no=' || Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
                   v_url := v_url || 'p_crd=' || Smart_Urlencode(PCUSTOMER_REQUIRED_DATE)|| '&';
                   v_url := v_url || 'p_take_over_time=' || Smart_Urlencode(PCUSTOMER_REQUIRED_TIME)|| '&';
                   v_url := v_url || 'p_retainsmpf=' || Smart_Urlencode(PSMPF_RETENTION)|| '&';
                   --v_url := v_url || 'p_emergency_winback='                    || Smart_Urlencode(PEMERGENCY_WINBACK)|| '&';
                   v_url := v_url || 'p_projectno=' || Smart_Urlencode(PCSS_PROJECT_ID)|| '&';
                   v_url := v_url || 'p_ordernotes=' || Smart_Urlencode(PCSS_ORDER_NOTES)|| '&';
                   v_url := v_url || 'p_reason_cessation=' || Smart_Urlencode(PREASON_FOR_CESSATION);
              ELSIF PSCENARIO_TYPE='CANCEL_OWN' THEN
              --Fetch the URL for cancel own from standing data.
                   BEGIN
                        SELECT VALUE
                        INTO v_url
                        FROM SMT_ORACLE_PARAMETERS
                        WHERE parameter_code = c_url_cancelown
                        AND host_id = ( SELECT host_id
                                                      FROM SMART_HOSTS A
                                                      WHERE EXISTS ( SELECT 1
                                                                     FROM DB_PARAMETERS b
                                                                     WHERE A.hostname = b.hostname
                                                                     AND A.database_id = b.database_id));
              --handle unforseen exception
                   EXCEPTION
                             WHEN NO_DATA_FOUND THEN
                             v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelown_details'; --After testing the same, URL will be fetched from the Query
                   WHEN OTHERS THEN
                             v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelown_details'; --After testing the same, URL will be fetched from the Query
                   END;
              --construct the URL
              v_url := v_url || '?';
              v_url := v_url || 'p_data_entered=' ||Smart_Urlencode('xmloverhttp')|| '&';
              v_url := v_url || 'p_channel_type=' ||Smart_Urlencode(PCHANNEL_TYPE)|| '&';
              v_url := v_url || 'p_css_start_order_no=' ||Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
              v_url := v_url || 'p_tel_no=' ||Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
              v_url := v_url || 'p_cancel_reason=' ||Smart_Urlencode(PCANCELLATION_REASON)|| '&';
              v_url:= v_url || 'p_cancel_notes=' ||Smart_Urlencode(PCANCELLATION_NOTES);
              ELSIF PSCENARIO_TYPE='CANCEL_OTHER' THEN
              --Fetch the URL for cancel own from standing data.
              BEGIN
              SELECT VALUE
                        INTO v_url
                        FROM SMT_ORACLE_PARAMETERS
                        WHERE parameter_code = c_url_cancelother
                        AND host_id = ( SELECT host_id
                                                      FROM SMART_HOSTS A
                                                      WHERE EXISTS ( SELECT 1
                                                                     FROM DB_PARAMETERS b
                                                                     WHERE A.hostname = b.hostname
                                                                     AND A.database_id = b.database_id));
              --handle unforseen exception
              EXCEPTION
                   WHEN NO_DATA_FOUND THEN
                        v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelother_details'; --After testing the same, URL will be fetched from the Query
                   WHEN OTHERS THEN
                        v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_cancelother_details'; --After testing the same, URL will be fetched from the Query
              END;
              --construct the URL
              v_url := v_url || '?';
              v_url := v_url || 'p_data_entered=' ||Smart_Urlencode('xmloverhttp')|| '&';
              v_url := v_url || 'p_channel_type=' ||Smart_Urlencode(PCHANNEL_TYPE)|| '&';
              v_url := v_url || 'p_css_stop_order_no=' ||Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
              v_url := v_url || 'p_tel_no=' ||Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
              v_url := v_url || 'p_cancel_reason=' ||Smart_Urlencode(PCANCELLATION_REASON);
              ELSIF Pscenario_type='AMEND_CRD' THEN
              --Fetch the URL for cancel own from standing data.
              BEGIN
              SELECT VALUE
                        INTO v_url
                        FROM SMT_ORACLE_PARAMETERS
                        WHERE parameter_code = c_url_amendcrd
                        AND host_id = ( SELECT host_id
                                                      FROM SMART_HOSTS A
                                                      WHERE EXISTS ( SELECT 1
                                                                     FROM DB_PARAMETERS b
                                                                     WHERE A.hostname = b.hostname
                                                                     AND A.database_id = b.database_id));
              --handle unforseen exception
              EXCEPTION
              WHEN NO_DATA_FOUND THEN
                   v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_amendcrd_details'; -- After testing the same , URL will be fetched from the Query
              WHEN OTHERS THEN
                   v_url := 'Http://wls.brassi1c.devenv1.bt.co.uk:64738/pls/spgenv/spg_btrc.add_btrc_amendcrd_details'; -- After testing the same , URL will be fetched from the Query
              END;
              --construct the URL
              v_url := v_url || '?';
              v_url := v_url || 'p_data_entered=' ||Smart_Urlencode('xmloverhttp')|| '&';
              v_url := v_url || 'p_channel_type=' ||Smart_Urlencode(PCHANNEL_TYPE)|| '&';
              v_url := v_url || 'p_css_start_order_no=' ||Smart_Urlencode(PCSS_ORDER_NUMBER)|| '&';
              v_url := v_url || 'p_tel_no=' ||Smart_Urlencode(PTELEPHONE_NUMBER)|| '&';
              v_url := v_url || 'p_crd='                         ||Smart_Urlencode(PCUSTOMER_REQUIRED_DATE)|| '&';
              v_url := v_url || 'p_css_change_order_numbers='||Smart_Urlencode(PCANCELLATION_REASON);
              END IF;
              --this is start of setting parameters for utl http object. the show begins...
              utl_http.set_transfer_timeout(v_timeout);
              --Set the wallet
              --XXXXX e.g.UTL_HTTP.SET_WALLET(?file:DirectoryPath?,'put password here?);
              --Set proxy
              --YYYYY e.g. utl_http.set_proxy(p_proxy_in, p_no_proxy_domains_in);
              v_url := REPLACE(v_url,'%27%27','%27'); -- Fix to ensure Double Quotes are converted to Single Quotes
              --set the required URL to utl http.
              v_req := utl_http.begin_request(v_url);
              --Authentication setting
              --Fetch the user id and password from stnding data.
              BEGIN
                   SELECT *
                        INTO v_userid_pwd
                        FROM SMT_ORACLE_PARAMETERS
                        WHERE PARAMETER_CODE=c_spg_useridpwd
                        AND HOST_ID = ( SELECT HOST_ID
                                            FROM SMART_HOSTS A
                                            WHERE EXISTS ( SELECT 1
                                                                FROM DB_PARAMETERS B
                                                                WHERE A.HOSTNAME = B.HOSTNAME
                                                                AND A.DATABASE_ID = B.DATABASE_ID));
              EXCEPTION
                   WHEN NO_DATA_FOUND THEN
                   P_RESPONSE := 'ORACLE_ERROR: USER id AND Password NOT configured IN SMT_ORACLE_PARAMETERS:SPGIDPWD';
                   WHEN OTHERS THEN
                   P_RESPONSE := 'ORACLE_ERROR: USER id AND Password NOT configured IN SMT_ORACLE_PARAMETERS:SPGIDPWD';
              END;
              --utl_http.set_authentication(v_req, p_username_in, p_password_in);
              utl_http.set_authentication(v_req, v_userid_pwd.description, v_userid_pwd.VALUE);
              v_resp := utl_http.get_response(v_req);
              --Fill in the the response time
              PRESPONSE_TIME := (DBMS_UTILITY.GET_TIME - v_start_time)/100;
              IF v_resp.reason_phrase = 'OK' THEN
                   -- Fetch the response
                   BEGIN
                        LOOP
                        utl_http.read_line(v_resp, v_buffer);
                             P_RESPONSE := P_RESPONSE || v_buffer;
                        END LOOP;
                             utl_http.end_response(v_resp);
                        EXCEPTION
                        WHEN utl_http.end_of_body THEN
                        utl_http.end_response(v_resp);
                        P_RESPONSE := P_RESPONSE || v_buffer;
                   END;
              ELSIF v_resp.reason_phrase <> 'OK' OR P_RESPONSE = '' THEN
                   --error handling starts
                   --If the HTTP Status is not OK then store the error information
                   PORACLE_ERROR_MESSAGE     :=     'Status Code: '|| v_resp.STATUS_CODE||'. Reason Phrase ' ||v_resp.reason_phrase;
                   P_RESPONSE                    :=     'ORACLE_ERROR: '||     ' Reason Phrase ' ||     v_resp.reason_phrase;
                   PORACLE_ERROR               :=     v_resp.STATUS_CODE;
              END IF;
              --In case we got successful response from SPG
              IF P_RESPONSE LIKE '%<RetCde>0</RetCde>%' THEN
                   PDATA_TRANSFER_STATUS     :=     'Y';
              ELSE
                   BEGIN
    SELECT message
                                  INTO vl_std_returnCode
                                  FROM SMT_MESSAGES
                                  WHERE MESSAGE_CODE='SPGANTIDTS';
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
         vl_std_returnCode := '-12545,-29273,-1,401,';
    WHEN OTHERS THEN
                        vl_std_returnCode := '-12545,-29273,-1,401,';
    END;
                   --In case there was an error do not update Data Transfer Status
                   IF PORACLE_ERROR <> NULL AND INSTR(vl_std_returnCode, PORACLE_ERROR || ',', 1, 1) <> 0 THEN
                             PDATA_TRANSFER_STATUS:=PDATA_TRANSFER_STATUS;
                   ELSE
                        vl_RetCode := SUBSTR(P_RESPONSE, INSTR(P_RESPONSE,'<RetCde>', 1, 1),
                        INSTR(P_RESPONSE,'</RetCde>',1,1)+9 - INSTR(P_RESPONSE,'<RetCde>', 1, 1));
                        BEGIN
                             SELECT VALUE
                                  INTO vl_std_returnCode
                                  FROM SMT_ORACLE_PARAMETERS
                                  WHERE PARAMETER_CODE='SPGRCS'
                                  AND HOST_ID = ( SELECT HOST_ID
                                       FROM SMART_HOSTS A
                                       WHERE EXISTS ( SELECT 1
                                                           FROM DB_PARAMETERS B
                                                           WHERE A.HOSTNAME = B.HOSTNAME
                                                           AND A.DATABASE_ID = B.DATABASE_ID));
                   EXCEPTION
                        WHEN NO_DATA_FOUND THEN
                             vl_std_returnCode := '<RetCde>4244</RetCde><RetCde>4245</RetCde><RetCde>4246</RetCde>';
                        WHEN OTHERS THEN
                             vl_std_returnCode := '<RetCde>4244</RetCde><RetCde>4245</RetCde><RetCde>4246</RetCde>';
                        END;
                        IF INSTR(vl_std_returnCode, vl_RetCode, 1, 1) <> 0 THEN
                             --needs not to re attempted.
                             PDATA_TRANSFER_STATUS:='X';
                        ELSE
                             --In case we did'nt got SUCCESSFUL response FROM SPG THEN UPDATE the Data Transfer Status so that the failed requests can be picked up BY the NEXT batch job RUN
                             IF PDATA_TRANSFER_STATUS='N' THEN
                                  --initially if data transfer status was N then update it now to F
                                  PDATA_TRANSFER_STATUS     :=     'F';
                             ELSIF PDATA_TRANSFER_STATUS='F' THEN
                                  --initially if data transfer status was N then update it now to S
                                  PDATA_TRANSFER_STATUS     :=     'S';
                             END IF;
                        END IF;
                   END IF;
              END IF;
              --Now Update all the modified Values
         UPDATE SPG_INTERFACE_TABLE
                   SET     response          =     P_RESPONSE,
                   data_transfer_status     =     PDATA_TRANSFER_STATUS,
                   oracle_error               =     PORACLE_ERROR,
                   oracle_error_message     =     PORACLE_ERROR_MESSAGE,
                   response_time               =     PRESPONSE_TIME
                   WHERE transaction_id     =     PTRANSACTION_ID;
              COMMIT;
    END IF;
    EXCEPTION
         WHEN OTHERS THEN
         --Handling the unhandled exception
         PORACLE_ERROR               :=     SQLCODE;
         PORACLE_ERROR_MESSAGE     :=     SQLERRM;
         P_RESPONSE                    :=     'ORACLE_ERROR: '|| PORACLE_ERROR_MESSAGE;
         PRESPONSE_TIME               :=     (DBMS_UTILITY.GET_TIME - v_start_time)/100;
         SELECT data_transfer_status INTO PDATA_TRANSFER_STATUS
         FROM SPG_INTERFACE_TABLE
         WHERE transaction_id=PTRANSACTION_ID;
         --New functionality to update the oracle error and oracle error message and not the Data Transfer Status
    BEGIN
    SELECT message
    INTO vl_std_returnCode
    FROM SMT_MESSAGES
    WHERE MESSAGE_CODE='SPGANTIDTS';
    EXCEPTION
    WHEN NO_DATA_FOUND THEN
    vl_std_returnCode := '-12545,-29273,-1,';
    WHEN OTHERS THEN
    vl_std_returnCode := '-12545,-29273,-1,';
    END;
         vl_RetCode     :=     PORACLE_ERROR || ',';
    IF INSTR(vl_std_returnCode, vl_RetCode, 1, 1) <> 0 THEN
    --If the error is found in above maintained standing data do not change the Data Transfer Status
                   pdata_transfer_status:=pdata_transfer_status;
    ELSE
              IF pdata_transfer_status='N' THEN
                             PDATA_TRANSFER_STATUS     :=     'F';
                             DBMS_OUTPUT.PUT_LINE('DUE TO ERROR DATA COULDN''T GET TRANSFERED TO SPG FOR TRANSACTION'||' '||PTRANSACTION_ID);
                             DBMS_OUTPUT.PUT_LINE(SQLERRM);
              ELSIF pdata_transfer_status='F' THEN
                             PDATA_TRANSFER_STATUS     :=     'S';
                             DBMS_OUTPUT.PUT_LINE('DUE TO ERROR DATA COULDN''T GET TRANSFERED TO SPG FOR TRANSACTION'||' '||PTRANSACTION_ID);
                             DBMS_OUTPUT.PUT_LINE(SQLERRM);
    ELSE
                             DBMS_OUTPUT.PUT_LINE('Failure WHEN sending data TO Error LOG. Data Transfer Status IS ' || PDATA_TRANSFER_STATUS || '. TRANSACTION ID '|| PTRANSACTION_ID);
              END IF;
    END IF;
              --Now update all the information gathered above to the table
         UPDATE SPG_INTERFACE_TABLE
              SET     response          =     P_RESPONSE,
              data_transfer_status     =     PDATA_TRANSFER_STATUS,
              oracle_error               =     PORACLE_ERROR,
              oracle_error_message     =     PORACLE_ERROR_MESSAGE,
              response_time               =     PRESPONSE_TIME
              WHERE transaction_id     =     PTRANSACTION_ID;
              COMMIT;
    END;
    /

    I have fixed the problem by own.
    Seems there are some while space in the endpoint url.
    Fix
    http_req:= utl_http.begin_request
    trim(l_endpoint_url)
    ,'POST'
    ,'HTTP/1.1'
    It works...
    Regards
    BS

  • ORA-29270: too many open HTTP requests

    Hi,
    We have a requirement like, we will get bulk data (2 GB) data file with different languages(Russian, chinese, Japanese, German) etc. and we need to load these data into our databse also we have to translate the same.
    We are using Oracle 11g.
    We had used Oracle httpuritype - And the below mentioned procedure PROCEDURE TEST.PRC_TRANS_GERMAN will call the function - trans_jef
    Input parameter for PRC_TRANS_GERMAN - > To_language and from Language. and this procedure will store the translated word in the seperate table.
    Input parameter for the function trans_jef - > Word to be translated , from languae, to_language. And this function will return the translated word.
    The issue I am facing is when I am passing the table of around 10000 records, around 4000 rows are not getting translated. So when i try to capture the error in exception- the error is
    ORA-29273: HTTP request failed
    ORA-06512: at "SYS.UTL_HTTP", line 1819
    ORA-29270: too many open HTTP requests
    When I try to re execute the missed words, they were translated. But they are not getting translated in one go because of the too many http open request.
    So could you please let me know how to resolve this ORA-29270 errror. I know we have to end the request and start again. But not sure how to do. Can some one help with this~!!!!
    Translator
    CREATE OR REPLACE FUNCTION trans_jef (v_RawText    IN VARCHAR2,
                                          v_SrcLang    IN VARCHAR2,
                                          v_DestLang   IN VARCHAR2)
       RETURN CLOB
    IS
        v_EscRawText    VARCHAR2 (3000);
       v_XlateUrl      VARCHAR (3000);
       --v_SrcLang Varchar(10) ;-- := 'de';
       --v_DestLang Varchar(10) ; -- := 'en';
       v_XlateResult   CLOB;
       l_result        CLOB;
    BEGIN
       DBMS_OUTPUT.ENABLE (10000000);
        v_EscRawText := UTL_URL.escape (v_RawText, TRUE, 'UTF-8');
       v_XlateUrl :=
             'http://translate.google.com/translate_a/t?client=t&text='
          || v_EscRawText
          || '&hl='
          || v_DestLang
          || '&sl='
          || v_SrcLang
          || '&tl='
          || v_DestLang
          || '&ie=UTF-8&oe=UTF-8&multires=1&oc=1&prev=btn&ssel=0&tsel=0&sc=1';
         v_XlateResult := httpuritype (v_XlateUrl).getclob ();
       -- dbms_output.put_line (v_XlateResult);
       l_result := TRIM (BOTH '"' FROM REGEXP_SUBSTR (v_XlateResult, '"[^"]+"'));
        RETURN l_result;
    END;
    /* Formatted on 07-09-2012 09:21:05 (QP5 v5.215.12089.38647) */
    CREATE OR REPLACE PROCEDURE TEST.PRC_TRANS_GERMAN (TO_LANG1     IN VARCHAR2,
                                                       FROM_LANG1   IN VARCHAR2)
    IS
       P_CHINESE         VARCHAR2 (3000);
       FROM_LANG         VARCHAR2 (3000);
       FROM_LANG_CODE    VARCHAR2 (3000);
       TO_LANG_CODE      VARCHAR2 (3000);
       FROM_LANG_CODE1   VARCHAR2 (3000);
       TO_LANG_CODE1     VARCHAR2 (3000);
       cnt               NUMBER := 1;
       counter           NUMBER;
       CURSOR C1
       IS
          SELECT RAW_VAL_TXT FROM T_TRANS_VAL;
       VC1               C1%ROWTYPE;
    BEGIN
       OPEN C1;
       LOOP
          FETCH C1 INTO VC1;
          EXIT WHEN C1%NOTFOUND;
          BEGIN
             TO_LANG_CODE :=
                CASE TO_LANG1
                   WHEN 'English' THEN 'en'
                   WHEN 'Chinese Simplified' THEN 'zh-CN'
                   WHEN 'Chinese Tradational' THEN 'zh-TW'
                   WHEN 'German' THEN 'de'
                   WHEN 'Japanese' THEN 'ja'
                --other languages
                END;
             FROM_LANG_CODE :=
                CASE FROM_LANG1
                   WHEN 'English' THEN 'en'
                   WHEN 'Chinese Simplified' THEN 'zh-CN'
                   WHEN 'Chinese Tradational' THEN 'zh-TW'
                   WHEN 'German' THEN 'de'
                   WHEN 'Japanese' THEN 'ja'
                other languages
                --                 else 'auto'
                END;
             SELECT trans_jef (VC1.RAW_VAL_TXT, FROM_LANG_CODE, TO_LANG_CODE)
               INTO P_CHINESE
               FROM DUAL;
    -- same translator function is used. Language used is simplied chinese.
    -- We can use traditional Chinese as well ('zh-TW'), which works perfectly.
             FROM_LANG_CODE1 := --decode(from_lang,'en','English','ar','Arabic', from_lang);
                CASE FROM_LANG_CODE
                   WHEN 'en' THEN 'English'
                   WHEN 'zh-CN' THEN 'Chinese Simplified'
                   WHEN 'zh-TW' THEN 'Chinese Tradational'
                   WHEN 'de' THEN 'German'
                   WHEN 'ja' THEN 'Japanese'
                --other languages
                END;
             TO_LANG_CODE1 := --decode(from_lang,'en','English','ar','Arabic', from_lang);
                CASE TO_LANG_CODE
                   WHEN 'en' THEN 'English'
                   WHEN 'zh-CN' THEN 'Chinese Simplified'
                   WHEN 'zh-TW' THEN 'Chinese Tradational'
                   WHEN 'de' THEN 'German'
                   WHEN 'ja' THEN 'Japanese'
                --  other languages
                END;
             INSERT INTO t_trans
                  VALUES (FROM_LANG_CODE1,
                          VC1.RAW_VAL_TXT,
                          TO_LANG_CODE1,
                          P_CHINESE);
             COMMIT;
          EXCEPTION
             WHEN OTHERS
             THEN
                 INSERT INTO excep_trans (P_WORD_EXP, UPDATE_TIME, COUNTER)
                     VALUES (VC1.RAW_VAL_TXT, SYSDATE, cnt);
                INSERT INTO error_message
                     VALUES (DBMS_UTILITY.FORMAT_ERROR_STACK);
                 COMMIT;
          END;
        END LOOP;
       CLOSE C1;
    END;
    /Edited by: 950814 on 6 Sep, 2012 11:16 PM

    Simply add the call to your exception hander. E.g.
    EXCEPTION
             WHEN OTHERS
             THEN
                   UTL_TCP.Close_All_Connections;
                   INSERT INTO excep_trans (P_WORD_EXP, UPDATE_TIME, COUNTER)
                     VALUES (VC1.RAW_VAL_TXT, SYSDATE, cnt);
    ..etc..
    END;Also consider using proper coding standards. There is NO modern day programming language standard that says to write (selective) reserved words in uppercase. Write in lowercase. Use camelcase and pascalcase for variable names and procedures/functions/methods. Restrict the use of uppercase to defining identifiers such as compiler macros or constants.
    Do yourself a favour and read, understand and apply the basic naming standards as detailed in .Net Guidelines for Names and Code Conventions for the Java Programming Language.

  • Operation Could Not Be Completed:  Too Many Open...

    I've had this error showing up a lot in the Safari 3.2 and 4.0 beta activity window when loading multiple tabs of pages with many images (usually gallery type pages or blogs with lots of thumbnails). The result is that some images or other elements like style sheets don't load, leading to the blue question mark, or messed up formatting. Unfortunately, the activity window can't be stretched wide enough to see the whole error, but in fact it's "Operation Could Not Be Completed: Too Many Open Files". The error "socket(PF_ROUTE) failed: Too many open files" shows up in the Console as well, at least with Safari 4. I had also experienced similar problems with "Operation Timed Out" errors as well.
    I've been pulling my hair out on this one, because it's rather inconsistent, not to mention annoying. You can usually get an individual page to load completely by refreshing it, but that kind of defeats the purpose of loading multiple tabs all at once. It's also less of a problem if more of those pages are already cached, but you never know for sure. Running your connection through a proxy also helps a bit, but not always.
    I found a fix, but it's actually not Safari's "fault" per se. The issue lies in the allowable number of open files per user process, which is set by the system's launchd process at boot time. Note that Safari is not entirely innocent, as FireFox doesn't have this problem. It Seems that Safari just tries to load everything all at once, whereas FireFox does a better job of managing its load requests. Anyway if you run the following command in Terminal:
    sudo launchctl limit
    the following list should show up (with perhaps slightly different values)
    cpu unlimited unlimited
    filesize unlimited unlimited
    data 6291456 unlimited
    stack 8388608 67104768
    core 0 unlimited
    rss unlimited unlimited
    memlock unlimited unlimited
    maxproc 200 532
    maxfiles 256 unlimited
    The second column is a "soft limit" and the third column is a "hard limit", though to be honest I'm not exactly sure what the difference entails. The image loading problem is caused by hitting the maxfiles limit of just 256 files. The solution is to change maxfiles to 4096/unlimited, and also change maxproc to 1000/2000 since it's pretty low as well. That sounds like a pretty big change, but OS X server is supposed to change them to numbers like this when services like Apache are enabled, and Apple even mentions how to change maxproc at http://support.apple.com/kb/TS1659
    To make these changes, run the following two commands in Terminal and restart the computer:
    echo "limit maxproc 1000 2000" | sudo tee -a /etc/launchd.conf
    echo "limit maxfiles 4096 unlimited" | sudo tee -a /etc/launchd.conf
    The commands add the two lines in quotes to the launchd.conf file in /etc/ (if no file exists yet, it creates it). That should clear up the loading issues. I haven't noticed any other problems with these increased numbers, but I'll report back if anything seems to go amiss. Hopefully this will be helpful to someone.

    I faced the same problem with an image gallery using css for image resizing. Thanks for the explanation.

Maybe you are looking for

  • Can "h:selectOneListbox" be used for navigation?

    I have an application that will be made up of several .war files. Each .war file is an application in itself. In other words, this is still considered as one big application, but for development purposes, each "feature" of the one big application is

  • HT4623 How do I update my iphone 5 to the new ios7 software using itunes on my computer?

    How do I update my iphone 5 to the new ios7 software using itunes on my computer?

  • Problem While Uploading Document in Upload Iview

    Hi,           Whenever am try to upload a document Url iview (Content Magmt --> explorer > Documents>folder->new-->upload)showing the following error " "upload.xls" does not exist, or file is empty; you cannot upload empty files". Whatever file i upl

  • DMA issues w/ DVD/CD

    I've been experiencing choppy playback of my DVDs, and I looked around, and noticed that I do not have DMA enabled for my combo drive. I've looked around in all the places I could, and tried all the fixes I could, and none of them work, hoping I'll f

  • Key code is not valid or expired.

    Hi All Problem: Upgrade from Crystal Reports XI Release 1 to Crystal Reports XI Release 2? Cannot use Release 1 Product Code when installing Release 2 Redistributable File on client workstations. .net 2005 Error msg: key code is not valid or expired.