Tool tip throwing error

Hi
I have a code that dynamically creates checkbox objects after reading a XML file and at the same time when I say JCheckBox obj = new JCheckBox(name) im also assigning the tooltip as obj.setToolTipText(name)
the code seems to be working fine and all the check boxes are also displayed with the name as shown on the checkbox but when I hover the mouse over the checkboxes it throws the exception java.lang.Error: Destination component not connected to component tree hierarchy
that too not allways.. sometimes the code works fine and sometimes it gives error
rgds

com'n guys...Where are we going?

Similar Messages

Configuration cannot recreate domain. Restart of Config tool also throws error.

It is first time I installed OIM on my laptop (Windows XP- 32 bit system, OIM 11.1.1.7.0), installation is successful but it failed at Step 18, Configuration Progress, Restart Domain.
When I try to re-launch configuration tool:
Start - Programs - Oracle IDM 11 g - Home1 - Configure Identity Management Components.
It fails with a pop up message "Could not create the Java Virtual Machine".
Kindly help to resolve this issue.

Hi ,
Did you set the Environment Variable ? Please check weather JAVA_HOME is set or not.
I would suggest Install Java run time which can solve this issue.
Thanks

Tool Tip Error

Hi,
Below is the error we are facing when we transported a WAD 7.0 template from Dev to QA and then executed the same in QA environment.
The metadata of "ITE" "DROPDOWN_ITEM" are incorrect for parameter "TOOLTIP".
This error does not occur when executing the WAD in Dev environment. It occurs only in QA.
Where do we have to make the change for the metadata settings or parameter values?
Thanks,
Sri Arun Prian

I've just noticed that the tool tip doesn't go lower than
lowest part of the initial browser height. Weird. This seems to be
a Firefox problem. I'm only able to test on Firefox3 and Safari.
Can anyone let me know it works in IE?
Thanks
DWS

[svn:fx-4.x] 14985: Add support for mirroring for both error tips and tool tips in positionTip ().

Revision: 14985
Revision: 14985
Author:   [email protected]
Date:     2010-03-24 09:40:24 -0700 (Wed, 24 Mar 2010)
Log Message:
Add support for mirroring for both error tips and tool tips in positionTip(). The layoutDirection of the toolTip will be the same as the component it goes with, or LTR, if the component is not ILayoutDirectionElement.
QE notes:
Doc notes: None
Bugs: SDK-25821
Reviewed By: Jason
Tests run: checkintests
Is noteworthy for integration: No
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-25821
Modified Paths:
    flex/sdk/branches/4.x/frameworks/projects/framework/src/mx/managers/ToolTipManagerImpl.as
    flex/sdk/branches/4.x/tools/dependencychecker/frameworkSwcExceptionsList.txt

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

How to get an error icon with tool tip in a displaying table in a particu

How to get an error icon with tool tip in a displaying table in a particular field..
Thanks.

Hi,
In the context create an attribute of type string .
Create the attribute in the node which you bind for table.
In the layout .
1.create a Table UI element.
2 create binding for UI element.
3Right click on the Table UI and select insert table column.
4.once the table column is inserted right click on table column and select insert cell editor.
5.create the cell editor of the type image.
6.Bind the source property of the image to the attribute in the node which you have created.
so depending on what image(type of icon) needs to be displayed set the attibute accordingly.
refer to the link for image :
[http://help.sap.com/saphelp_nw70ehp1/helpdata/en/d1/af8841349e1909e10000000a155106/frameset.htm]
Priya

Spry Tool Tip Error

Hi there, I'm really interested in getting the SPRY tool tips
working. I have a page that uses them on all my images. The first
line of tool tips work. The second doesn't follow the mouse
completely and on the last line of images the tool tip appears half
way up the page. Anyone work out why?
The page is:
http://www.hforhome.co.uk/development/tool-tip-deleteme.html
Thanks in advanced for any help.
DWS
The
page in question

I've just noticed that the tool tip doesn't go lower than
lowest part of the initial browser height. Weird. This seems to be
a Firefox problem. I'm only able to test on Firefox3 and Safari.
Can anyone let me know it works in IE?
Thanks
DWS

SSRS dataset throws error when another stored procedure is called inside dataset stored procedure

Hello;
I am using Report Build 3.0, I have a simple report which gets data using dataset which is created from a Stored Procedure. I have another stored procedure which updates the data in the table which is used for the report. I want to get the live data on report everytime
the report is run so that I call that stored procedure (sp_updatedata) inside my report dataset stored procedure and here where my report fails as it throws error while creating dataset.
Here is sample:
sp_updatedata (this only returns "Command(s) completed successfully"
Create Proce sp_getReportData
As
Begin
Exec sp_updatedata -- I call it to update the data before it displays on the report
Select * from customers
End
If I remove this line it works.
Exec sp_updatedata -- I call it to update the data before it displays on the report
Thanks
Essa Mughal

Hi MESSA,
According to your description, you create a dataset based on a stored procedure. In this procedure, it calls another procedure. Now it throws error when creating dataset. Right?
In Reporting Services, when creating dataset, all the query or stored procedure will be executed in SSMS. So if the procedure can be executed in SSMS, it supposed to be working in SSRS. However, it has a limitation in SSRS. In a dataset, it can only return
one result set.
In this scenario, I don't think it's the issue of calling other procedure inside of procedure. Because we tested in our local environment, it works fine. I guess the sp_updatedata returns a result set, and the "select * from customers" returns
another result set. This might be the reason cause the error.
Reference:
Query Design Tools in Report Designer SQL Server Data Tools (SSRS)
Reporting Services Query Designers
If you still have any question, please post the error message and the store procedure (sp_updatedata).
Best Regards,
Simon Hou

Spry tool tip does not work in template or child pages within an editable region. Why not?

Ok. so I am getting pretty frustrated. I take the time to learn how to use CSS and to create a template page for a Contractor Site (www.ContractorInsurance.net). The idea is to create a page that I can use for different classes of Contractors...right?
Then I get all happy about being able to insert ToolTip onto pages to help the user. Great!
LIfe to turn to Sorrow after nearly five hours of searching for a "eeking" answer.
So what good does it do to have an Editable region to update if we cannot have the flexibility to insert a tool tip on child pages? Ok so the fast solution is to what... Have a question mark image, insert another apDiv, name it toolTip_Not and provide it with a show=hide behavior?
RRRRRrrr...
This really sucks not being able to find a solution within a reasonable amount of time.

I have tried thank you. However...it is still not working.
www.ContractorInsurance.net/course_of_construction.php
The error message is "Making this change would require code that is locked by a template translator"
Re: Spry tool tip does not work in template or child pages within an editable region. Why not?
created by altruistic gramps in Spry Framework for Ajax - View the full discussion
If you have a look at the following simple document with a tooltipTooltip trigger goes here.
Tooltip content goes here.
you will notice that a couple of lines have been placed in the HEAD section of the document. When using DW templates, the HEAD section is usually not editable, hence the error mesaage. By default, your template should have an editable region in it just before the closing tag. It looks like this:  Dreamweaver should be able to find that editable region and insert the
<script> tag there automatically. Because you don't have an editable region like that in the <head>, open the master template, and paste the code above just before the closing </head>
tag. Gramps
Edited to remove personal data

Add tool tip to left right button in JTabbedPane??

Hi,
I am using a tabbed pane with follwong setting.
tabPane.setTabLayoutPolicy(JTabbedPane.SCROLL_TAB_LAYOUT);
So when the no of tab is more a left right button appears.
I want to add tool tip to these button
How do i get the instance of these buttons
thnx
Neel

try this for east/west, similar for north/south
(hopefully there's an easier way)
import java.awt.*;
import javax.swing.*;
class Testing extends JFrame
public Testing()
    setLocation(300,200);
    setSize(150,100);
    setDefaultCloseOperation(EXIT_ON_CLOSE);
    JTabbedPane tp = new JTabbedPane();
    tp.setTabLayoutPolicy(JTabbedPane.SCROLL_TAB_LAYOUT);
    tp.setUI(new MyUI());
    for(int x = 0; x < 12; x++)
      JPanel p = new JPanel();
      p.add(new JLabel(""+x));
      tp.addTab(""+(char)(x+65),p);
    getContentPane().add(tp);
class MyUI extends javax.swing.plaf.metal.MetalTabbedPaneUI
    protected JButton createScrollButton(int direction)
      if (direction != SOUTH && direction != NORTH && direction != EAST && direction != WEST)
          throw new IllegalArgumentException("Direction must be one of: SOUTH, NORTH, EAST or WEST");
      return new ScrollableTabButton(direction);
    private class ScrollableTabButton extends javax.swing.plaf.basic.BasicArrowButton implements javax.swing.plaf.UIResource,SwingConstants
      public ScrollableTabButton(int direction)
        super(direction, UIManager.getColor("TabbedPane.selected"),
                         UIManager.getColor("TabbedPane.shadow"),
                         UIManager.getColor("TabbedPane.darkShadow"),
                         UIManager.getColor("TabbedPane.highlight"));
        if(direction == WEST) setToolTipText("<<<<<");
        else if(direction == EAST) setToolTipText(">>>>>");
public static void main(String[] args){new Testing().setVisible(true);}
}

SL500 throws error 1804 (unauth. WAN card), impossible to boot

Just as a note upfront: I'm aware of similar threads like for example SL300 throws error 1804 (unauth. WAN card), impossible to boot. So here is my posting:
I get the 1804 error during boot. I can not enter BIOS any longer. Yesterday I could boot one time despite the fatal error message that says it halts the system (and it does normally), I somehow managed to get into the BIOS anyway, changed some settings and the could boot into the OS. Unfortunately today this does not seem possible any longer.
I tried to remove the WAN card to boot again but one of the two screws is wasted and I can not remove it. The other went out with no problems. So right now, the card is stuck inside and I can not remove it.
I also tried to disconnect the CMOS backup battery, but this did not help.
So I need help from someone with actual technical expertise to circumvent that fatal error on boot time. I know that normal IBM/Lenovo support personal can reset the bios, change the serial number etc. So I assume some tools and key-kombinations exist so that I can still boot this laptop.
As written, yesterday already I could boot that laptop even that error comes all the time. But I don't know how I managed that.
The only way I can imagine right now is to physically break up the WAN card so that it can removed in parts and the edge with the screw in can stay in while the card is destructed and therefore could be disconnected from the slot. However doing that, there is high risk to destroy more of that computer which I would like to prevent.
Any help is greatly appreceated. The WAN card was not in use. I have no clue why that problem pops up after years of use of that devide without any changes.

If you can enter BIOS again, go to Security > I/O Port Access > WWAN and set it to Disabled.
As for the screw/card, I had the exact same experience with an X61's WLAN card. It's far harder to rip apart the card than it is to drill through the screw head. (I ended up trying to snap the card before drilling, so...)
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Tool Tip / GUI-script battle

I've got a slider that invokes a handler that performs some AppleScript GUI scripting ( ... unfortunate, yes, but there's no other way.)
The slider has a Tool Tip.
If I click and drag outside of the slider's mouseDown region, no problem. The GUI stuff works as expected.
If I drag inside the slider's mouseDown region, the ToolTip appears at it designated time, as if I were hovering. This causes a NSReceiverEvaluationScriptError: 4 (1) error. Certainly makes sense that I'd get an error when the Tool Tip comes to the front. But I'm confused as to why it appears. None of my non-GUI related sliders have this problem.
Suggestions?
Here are a few other Tool Tip questions:
1) Can I increase or decrease the display length for all tool tips?
2) Is it possible to keep tool tips visible indefinitely while the user hovers the mouse over the object, closing on mouseLeave?
3) Can I toggle all Tool Tips to enabled or disabled?
Thanks, John

I've got a slider that invokes a handler that
performs some AppleScript GUI scripting ( ...
unfortunate, yes, but there's no other way.)
The slider has a Tool Tip.
If I click and drag outside of the slider's mouseDown
region, no problem. The GUI stuff works as expected.
If I drag inside the slider's mouseDown region, the
ToolTip appears at it designated time, as if I were
hovering. This causes a
NSReceiverEvaluationScriptError: 4 (1) error.
Certainly makes sense that I'd get an error when the
Tool Tip comes to the front. But I'm confused as to
why it appears. None of my non-GUI related sliders
have this problem.
Suggestions?
Just noticed: on another computer (a powerBook) I get the NSReceiver error at any click or drag. Cleaned all targets and got the same result.
I set a one second delay to make sure the GUI window gets time to come to the front but to no avail. There's a error at every click or drag.
John

Deployejb and ejbdescriptor throws error

I tried to deploy the ejb application to database using oracle
tool deployejb at DOS prompt,, like this
deployejb -republish -temp H:/myprojects/temp -user system -
password aabbcc -service %ORACLE_SERVICE% -verbose -descriptor
My8iEJB.ejb -generated My8iEJBClient.jar My8iEJB.jar
where ORACLE_SERVICE = sess_iiop://ventas.ideas:1521:vtas
this throws error like this
Unable to initialize threads : cannot find class java/lang/Thread
And tried ejbdescriptor like this
ejbdescriptor -parse My8iEJB.txt My8iEJB.ejb
this throws error like this
Class not found : de

I tried to deploy the ejb application to database using oracle
tool deployejb at DOS prompt,, like this
deployejb -republish -temp H:/myprojects/temp -user system -
password aabbcc -service %ORACLE_SERVICE% -verbose -descriptor
My8iEJB.ejb -generated My8iEJBClient.jar My8iEJB.jar
where ORACLE_SERVICE = sess_iiop://ventas.ideas:1521:vtas
this throws error like this
Unable to initialize threads : cannot find class java/lang/Thread
And tried ejbdescriptor like this
ejbdescriptor -parse My8iEJB.txt My8iEJB.ejb
this throws error like this
Class not found : de

Tool Tip for Top Level Navigation - EP6SP2?

Hi,
Is it possible to provide tool tip for top level navigation.
We have only one level TLN and Detail Navigation. On mouse over of TLN objects is it possible to provide tool tip?
Thanks.

Hi Raja,
as Pankaj stated, the NavTagLib is the answer - but: it needs the LightFrameworkPage. And both together at the moment for example doesn't support Collaboration, means, if you click on some room, bang, error messages and nothing does work as expected.
If you don't need CollRooms, you might give it a try.
In addition, you can check out the "Hover effect", see http://help.sap.com/saphelp_nw04/helpdata/en/53/a16a3e54a2e946e10000000a114084/frameset.htm - it's probably not really what you want, I just want to point to that possibility (working within the standard framework page) for a complete overview.
The last possibility is to modify com.sap.portal.navigation.toplevel; the TLN entries are rendered through toplevelnavigation.js, methods printLevel/printLevel1Table/printLevel2Table.
Hope it helps
Detlev

Tool Tip Text for field values in ALV report

Hi,
How to get the tool tip text for the field values in ALV report.
Thanks & Regards,
Pallavi.

Hi,
In fieldcatalog specify the TOOLTIP.
<b>
LVC_S_FCAT-TOOLTIP
</b>
In this speicfyteh tooltip you want.
Then append this to the fieldcatalog.
Hope this solves ur problem.

PL/SQL throwing errors! trying to alter dates

the following code keeps throwing errors, I was wondering if it is due to me getting confused when to use ":" before a variable and also ":=" when setting values?
Can anyone see what I am doing wrong?
Here is the code, at the moment it is throwing an error on line 44
ORA-06550: line 44, column 1:
PLS-00103: Encountered the symbol "" when expecting one of the following:
CODE.....
DECLARE
     QNStart DATE;
     QNFinish DATE;
     Q1Start DATE;
     Q1Finish DATE;
     Q2Start DATE;
     Q2Finish DATE;
     Q3Start DATE;
     Q3Finish DATE;
     Q4Start DATE;
     Q4Finish DATE;
     Q5Start DATE;
     Q5Finish DATE;
     QNT NUMBER;
     Q1T NUMBER;
     Q2T NUMBER;
     Q3T NUMBER;
     Q4T NUMBER;
     QNR NUMBER;
     Q1R NUMBER;
     Q2R NUMBER;
     Q3R NUMBER;
     Q4R NUMBER;
BEGIN
     case current_date
          when current_date between to_date('01-JAN', 'DD-Mon') AND to_date('31-MAR', 'DD-Mon') then
                    QNStart := to_date('01-JAN', 'DD-Mon');
                    QNFinish := to_date('31-MAR', 'DD-Mon');
          when current_date between to_date('01-APR', 'DD-Mon') AND to_date('30-JUN', 'DD-Mon') then
                    QNStart := to_date('01-APR', 'DD-Mon');
                    QNFinish := to_date('30-JUN', 'DD-Mon');
          when current_date between to_date('01-JUL', 'DD-Mon') AND to_date('30-SEP', 'DD-Mon') then
                    QNStart := to_date('01-JUL', 'DD-Mon');
                    QNFinish := to_date('30-SEP', 'DD-Mon');
          when current_date between to_date('01-OCT', 'DD-Mon') AND to_date('31-DEC', 'DD-Mon') then
                    QNStart := to_date('01-OCT', 'DD-Mon');
                    QNFinish := to_date('31-DEC', 'DD-Mon');
     End Case
:Q1Start := ADD_MONTHS(:QNStart,-3);
:Q1Finish := ADD_MONTHS(:QNFinish,-3);
:Q2Start := ADD_MONTHS(:QNStart,-6);
:Q2Finish := ADD_MONTHS(:QNFinish,-6);
:Q3Start := ADD_MONTHS(:QNStart,-3);
:Q3Finish := ADD_MONTHS(:QNFinish,-3);
:Q4Start := ADD_MONTHS(:QNStart,-4);
:Q4Finish := ADD_MONTHS(:QNFinish,-4);
:Q5Start := ADD_MONTHS(:QNStart,-5);
:Q5Finish := ADD_MONTHS(:QNFinish,-5);
select COUNT(COUNT(*)) INTO :Q1T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q1Start AND :Q1Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q2T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q2Start AND :Q2Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q3T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q3Start AND :Q3Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q4T from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :Q4Start AND :Q4Finish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :QNT from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
WHERE f.DATE_ENTERED BETWEEN :QNStart AND :QNFinish
AND a.ACTION_SCORE = 'Y'
AND f.INPUT_TYPE = a.ACTION_NAME
GROUP BY f.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q1R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q1Start AND Q1Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q2Start AND Q2Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q2R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q2Start AND Q2Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q3Start AND Q3Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q3R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q3Start AND Q3Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q4Start AND Q4Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :Q4R from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN Q4Start AND Q4Finish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q5Start AND Q5Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
select COUNT(COUNT(*)) INTO :QNR from FF_ACTIONS a
WHERE a.DATE_ENTERED BETWEEN QNStart AND QNFinish
AND a.COMPANY_NAME IN
     (select f.COMPANY_NAME from FF_ACTIONS f, FF_ACTION_TYPE_LOV a
     WHERE f.DATE_ENTERED BETWEEN Q1Start AND Q1Finish
     AND a.ACTION_SCORE = 'Y'
     AND f.INPUT_TYPE = a.ACTION_NAME
     GROUP BY f.COMPANY_NAME)
GROUP BY a.COMPANY_NAME;
EXECUTE
Cheers
Simon

Dave had given you already some good advice.
Your code is not only too complicated, but you have also probably a bug in it. You have for instance a QNstart as to_date('01.01, 'dd.mm') and a corresponding QNfinish as to_date('31.03', 'dd.mm'). As this means, it is the time portion at 00:01, you are missing the complete last day of this interval. So you better do:
declare
l_QNstart      date;
l_Q1start      date;
l_Q1finish     date;
l_q1t          number
begin
l_QNstart := trunc(sysdate, 'Q');
l_Q1start := add_months(l_QNstart, -3);
l_Q1finish := l_QNstart;
-- your condition is now
select count(count(*))
into   l_q1t
from   ff_actions f, ff_action_type_lov a
where f.date_entered >= l_Q1start and f.date_entered < l_Q1finish
and    a.action_score = 'y'
and    f.input_type = a.action_name
group by f.company_name;
end;
/Message was edited by:
Leo Mannhart
btw: what is the difference between Q1Start / Q3 Start and Q1Finish / Q3Finish resp.?

Tool tip throwing error

Similar Messages

Maybe you are looking for