Toolbar Key

Hi All
I have created a script to export some field values from master agreement in excel format. I am trying to add this script in the script definition.Here it is asking me for Toolbar Key while giving script definition. Can anybody please elaborate what should I put here.
Also while creating a script system gives me follwing options
Document Lifecycle Event
Collection Validation
Field Validation
Toolbar
Field Data Edit
I am not very sure what functionality each of these offers. Please help me with this.
Regards
Tripti

Hi Tripti,
All scripts are created in one of those six context options. So check your script and see the context it is for.
If it is a toolbar script, then on the UI, we are required to enter the 'Toolbar Key' which should be unique and this same value is required by the excel.
Take a look at the scripting and workflow guide on the SAP service marketplace for more details.
Regards,
Reshma

Similar Messages

  • Workshop tree and Field tree have become undocked

    Hi All ,
    I have 11.5 and have somehow undocked my Workshop tree
    and Field tree in the Formula Editor.  Now all my reports are that way !
    Is there a reset button or something ?
    I couldn't find anything in the Crystal environment
    for something as simple as redocking a window.
    Help 
    Thanks,
    JImmy

    Hi Jimmy,
    There is a registry key that can reset the toolbars and dock them back.
    Before you edit the registry, please back it up and make sure u2018Allow Dockingu2019 is selected for the particular tree that is not docked. Just right-click the blank area of the floating tree and check if u2018Allow Dockingu2019 is selected.
    Go to start > run > regedit.
    Browse through HKEY_CURRENT_USER > Software > Business Objects > Suite 11.5 > Crystal Reports > Formula Workshop.
    Under this, the keys ToolBar-Bar1 to ToolBar-Bar3 are for each of the three trees. Depending on which one of them is undocked, click on the correct ToolBar-Bar1/2/3 keys. If you click on one of these keys, there should be a value on the right called u2018WindowNameu2019; this will show what tree the current key belongs to.
    Once you select the right ToolBar key, on the right side look for u2018DockingStyleu2019 and set it to u2018f000u2019. Also look for u2018MRUFloatStyleu2019 and set it to u20180u2019.
    Restart CR and open the Formula Workshop, the tree would still be undocked. To Dock it, just double-click the tree.
    Hope this helps!
    -Abhilash

  • Clear the IP address list under Add Printer

    In the "Add printer" window, under the IP tab, there is a dropdown menu next to "Address" that lists my IP address. Is there a way to clear this dropdown menu?

    I also see a "com.apple.print.PrintingPrefs.plist" that also shows a history of IP addresses. Do I do anything with those?
    I will show here what I see in "com.apple.add.plist" and tell me what part to delete:
    <?xml version=1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
    <key>NSWindow Frame com.apple.print.add.window</key>
    <string>136 452 520 378 0 0 1440 830 </string>
    <key>com.apple.print.add.toolbar</key>
    <dict>
    <key>SelectedItemIdentifier</key>
    <string>com.apple.print.pbm.ip</string>
    </dict>
    <key>com.apple.print.pbm.ip</key>
    <dict>
    <key>Recent Addresses</key>
    <array>
    <string> [IP address]</string>
    </array>
    </dict>
    </dict>
    <plist>
    Thanks.

  • ADA 508 Compliance Workflow Overview (tab key for navigation / WebAim Toolbar)

    Hi,
      I've been assigned to update interactive training for a State agency..... with of course, an emphasis on ADA / 508 compliance.
    So, before I pinpoint my two questions/scenarios, here is a basic, initial attempt at providing an overview of ADA compliance workflow in Captivate and beyond. 
    PS - useful Captivate forum urls are at the end of this post. I'm using Captivate v.6
    ADA Compliance Workflow Overview:
    1. All assets need an alt tag and conceivably a description > highlight the asset, like a pic, and click the Accessibility button under Properties.
    2. Create slide notes for each slide > load slide, highlight no assets and click the Accessibility tab under Properties. Copy and paste your notes > for screen readers.
    3. Need closed captioning for video/audio content > I use Camtasia for CC and will use the JW player for screen reader of video content.
    4. Interactivity needs to be accessible via the tab and enter keys.
    What else am I missing?
    Question 1
    My question targets how to get the enter key to initiate after a successful tab. To be clearer.... I hit tab and I can navigate through all the buttons in the correct order, but hitting enter provides no action. I am gettining the yellow highlights around buttons when I tab through. Everything works very well when using the mouse, but blind users don't use mice.
    I did create my own animation buttons in Flash and imported them in as animations. I then placed a Click Box behind the button animation to engage the rollover action. Could this be causing problems? The prebuilt (and clunky looking) buttons on the quizzes do work (ie) tabbing to them and hitting enter provides effective navigation.
    I'm opting not to use the playback control skin, only my Flash nav bar.
    Question 2 (Scenario 2)
    I have downloaded the WebAim Toolbar feature designed for FireFox, used to check ADA compliance issues.
    I am getting this error message:
    A frame does not have a title attribute or value. Okay... I bet I can fix this via the .html file or via the standard.js file??
    and these warnings:
    Alert: Javascript in head - A javascript element is present in the page head section.
    Alert: Flash - A Flash object is present.
    Does anyone know if these alerts are worth fixing?
    Obviously Captivate is going to pump out, or rather publish... javascript elements, but is this bad in the page head section?
    And..... of course a Flash object is present...Captivate produces Flash / Shockwave files.
    I'll obviously ask the programmers at WebAim for guidance as well. As always any help would be appreciated and Tanks in advance.
    http://forums.adobe.com/message/117985#117985
    http://gneil.blogspot.com/2008/09/target-6-million-settlement-is-your.html
    http://kb2.adobe.com/cps/403/kb403160.html
    http://forums.adobe.com/message/3515968#3515968
    Screen grabs are attached.
    Thanks, Calif Dreamin'

    Hi,
      Attached is my zipped project file. I did create my own buttons in Flash - this might be the problem. I have only been problem solving with navigation on the first four slides.
      To clarify, hitting the Enter key does engage navigation, however I’m having difficulty controlling the navigation so that it goes to the correct location.
      I’m using Captivate v.6 / publishing SCORM 1.2 / Using IE to deliver via the SyberWorks LMS.
    Here is question 1:
    Question 1
    My question targets how to get the enter key to initiate after a successful tab. To be clearer.... I hit tab and I can navigate through all the buttons in the correct order, but hitting enter provides no action. I am getting the yellow highlights around buttons when I tab through. Everything works very well when using the mouse, but blind users don't use mice.
    I did create my own animation buttons in Flash and imported them in as animations. I then placed a Click Box behind the button animation to engage the rollover action. Could this be causing problems? The prebuilt (and clunky looking) buttons on the quizzes do work (ie) tabbing to them and hitting enter provides effective navigation.
    I'm opting not to use the playback control skin, only my Flash nav bar.
    Thanks for reaching out!!
    Thanks,
    Bill Farrell  (aka Calif Dreamin’)

  • I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar. Enter key also will not work on toolb

    I have updated to Mozilla 16.0.1 and yahoo toolbar 2.4.8.20120412011105. Search assist now no longer works on the toolbar, nor does the enter key. I've reinstalled both Mozilla and the yahoo toolbar. I've followed the instructions given in the customize toolbar section, but I am thinking that perhaps this toolbar just doesn't work with Mozilla?

    '''Try the Firefox Safe Mode''' to see how it works there. The Safe Mode is a troubleshooting mode, which disables most add-ons.''
    ''(If you're not using it, switch to the Default theme.)''
    * You can open the Firefox 4.0+ Safe Mode by holding the '''Shift''' key when you use the Firefox desktop or Start menu shortcut.
    * Or use the Help menu item and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
    ''Don't select anything right now, just use "'Start in Safe Mode"''
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shift key) to open it again.''
    '''''If it is good in the Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one.
    Please follow the [[Troubleshooting extensions and themes]] article for that.
    ''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''

  • How to set luma key in FCX 10.1.2?  Luma key adjustments do not open when selecting the  Effects button on the toolbar.

    Using FCPX 10.1.2 and trying to adjust a luma key, when selecting the Effects button on the Toolbar, the adjustments do not appear.  Any suggestions?

    TThe effects controls should be in the inspector. Select the clip in the timeline and post a screen shot of the video inspector.

  • Adobe toolbars do not show with F8 key

    Dear Adobe Forms expert!
    We are looking at display forms in e-recruiting. When we want to show the Adobe toolbars within the SAP display, we can hit the F8 key and they show and if we want to hide them again, we just hit the key again.
    This is as well mentioned in the last sentence of the [SAP Help|http://help.sap.com/saphelp_nw2004s/helpdata/en/45/2dbb13d79f3446e10000000a155369/frameset.htm] document.
    For most users it does work but one for one of our team members it does not want to work. We tried different PCs as well. The F8 works for her in the Acrobat reader itself, but not in the portal.
    Any ideas how we can fix this?
    Thanks and best regards,
    Mathias

    Thanks for your reply...but thats did not work. As I said earlier, I have a Structure in my rows and 2 characteristics in my free chracteristics and in my columns I have a selection of key figures...
    What I want is when I drill down on one of my 2 free characteristics, I do not want to see rows with amounts (KFs) zero or space.
    RR

  • Shortcut Key v. Toolbar Button - Set in point/set out point

    I know that the shortcut keys to insert an in-point and out-point are Alt+[  and Alt+]  - but is there actually a button to add these points in Adobe After Effects CS6?   I'm terrible at remembering shortcut keys and can't believe that it doesn't appear at least somewhere on the toolbar?
    Thanks, Lisa

    There is nothing in the tool bar but at the bottom of the timeline there is this:
    You can use the in/out/duration/stretch panel to set in and out points numerically. It takes a bit of gettin used to so I'd suggest that you read through some of the training materials on the timeline by typing Timeline in AE's search help field and run through some of the tutorials.

  • PAGEUP and PAGEDOWN keys won't work in Bookmarks Toolbar. HOME and END key works fine though.

    I have tried the ui.elantech_gesture_hacks.enabled method, Firefox in Safe Mode as well as deleting an existing profile and running a new one, uninstalled Firefox and removed all entries/folders associated with it and reinstalled, restarted computer numerous times in between methods, have also updated and rolled back drivers for wireless keyboard and mouse. Nothing works. Problem started when I installed Firefox 4, now I have version 23.0.1 and still can't use the mentioned keys.
    I could still use PGUP/DN if I open the bookmarks using CTRL+B on the side but it makes work more productive and less stressful on the wrists if I can just scroll through by Bookmarks via the toolbar.
    Thanks in advance for any advice.

    Yes, those keys seems to be not implemented for the bookmarks toolbar.
    If this for folder the you have created yourself then you can consider to organize the bookmarks in sub folders that do not require scrolling.
    I personally use code in userChrome.css to add scroll bars to make it easy to reach content like live feeds that require scrolling.
    *[[/questions/968861]]
    Here is another thread by the OP: [[/questions/969577]]
    <blockquote>Have tried using the following methods and restarting the PC between methods:
    * ui.elantech_gesture_hacks.enabled 3. Change its value from -1 to 0 4
    * Deleted old profile and created a new one
    * Firefox in Safe Mode
    * Rolled back updated drivers for Mouse and Wireless Keyboard
    * Uninstalled Firefox and deleted all folders and registry entries associated with it and then reinstalling Firefox
    * Caret mode enabled / Caret mode disabled </blockquote>

  • No toolbar unless startup w/shift key?

    No toolbar unless startup w/shift key?

    I don't know which "toolbar" you refer to, but if starting up in Safe Mode is necessary to see it, this suggests some third party software conflict.
    charlie

  • I want to access my Bookmark Toolbar with the Apple Key

    Is there a way to have Firefox access the bookmarks in my bookmarks toolbar using the Apple Key + a number key?
    For example, hitting Apple+1 would go to the first bookmark on my toolbar, Apple+2 would go to the second, etc.
    Thanks

    Thank you. very helpful. I have not found all the JSON and other files, but I now think I now what to do, and will be able to get to where I want.
    Once again, thanks for efforts and reply

  • What is "hold down the option key" to get toolbar back?

    I lost the toolbar and had instruction to reset tool bars and controls for windows. I was told to hold down the option key. What is option key?

    Reference to the option key was found in the instructions to Reset toolbars and controls from support Mozilla.
    Thank you for the info. Pressing the alt key does produce the tool bar temporarily. I can use bookmarks if I act quickly before the toolbar disappears. With your info I will go back and try to get the toolbar back permanently.

  • How do I install the yahoo toolbar with shortcut keys to firefox 5.0? Says its not supported

    Firefox said it was time to update, so I did, and it gave me firefox 5.0. I had to uninstall a lot of my add-ons as they were not compatible with the new 5.0 version, including my yahoo toolbar with shortcut keys, and my favorite add-on. I have lost all my shortcuts on my yahoo toolbar, and all my favorites. When will these add-ons be updated to work with 5.0 or what can I do to downgrade to 4.0 so my internet/computer will function properly again?

    You can use the [https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/ Compatibility Reporter add-on] to re-enable your other add-ons to see if they work in Firefox 5.

  • When link is opened by clicking middle button, it appears in tab toolbar;but when opened via left button (set to open in new tab) it is not shown - hidden under BACK key? I'd like left clicked tabs shown. & use mid.button for Enter.

    Windows XP; FireFox 4.0
    Would like not to have to use any keyboard shortcuts.

    No. The Tab bar is a regular toolbar in current Firefox versions, so you get the normal right-click context menu of a toolbar if you right-click the tab bar.
    You can double click on empty space on the tab bar to open a new tab if you do not want to use the new tab button.<br />
    You can drag a link on that new tab button to open that link in a new tab.<br />
    You can also drag the new tab button on another toolbar if you would like that better.<br />
    Open the Customize window via "View > Toolbars > Customize" or via "Firefox > Options > Toolbar Layout"<br />

  • Get the node key while using button on toolbar

    HI All
    I'm using alv tree (class - CL_GUI_ALV_TREE ) and I want to add a button
    to the toolbar (class - CL_GUI_TOOLBAR ) that User can delete
    a row from the tree .
    assume the user put the cursor on row
    how can i know on which node_key is it ?
    I am using the event function selected for the button ...
    Regards
    Alex

    Alex,
    check this sample program BCALV_TREE_04
    call method g_alv_tree->get_selected_nodes
              changing
                ct_selected_nodes = lt_selected_nodes.
    Thanks
    Bala Duvvuri

Maybe you are looking for