Total Last Cell from last row, last column into another table

What I'm trying to do is create a sum in a final table that will add together all the last cell Sums in the last column, last row from all Ten tables.
Example of where I want to get the information from:
I know I could use something like this *=SUM(Table 1 :: K45,Table 2 :: D9)* but in the future I want to be able to add extra rows in the Ten tables and therefore have the final table calculate the last cell without having to manualy change the cell numbers in the Sum.
Message was edited by: Pongify

Pongify wrote:
Your "Bingo" solution worked a treat, now with Ten tables do I have to put the code in the last table cell Ten times changing the table number on each?
Yes you have, the last table is perfectly unable to guess from which table it must grab datas.
CAUTION There is an oddity which I call a bug.
If you rename one of the table from which you grab datas, the two first occurences (in bold) in the formula will be adjusted accordingly but the 3rd one will not (the underlined one).
=INDIRECT(ADDRESS(ROWS( *Tableau 1* :: A),COLUMNS( *Tableau 1* :: 1:1),,,"_Tableau 1_"))
My guess is that the designers forgot that this "string" has exactly the same status as the first two occurences. Of course it's reported to Apple but at this time, we have to live with it.
Here is a slightly modifier formula:
=INDIRECT(ADDRESS(ROWS(Tableau 1 :: A),COLUMNS(Tableau 1 :: $1:$1),,,"Tableau "&ROW()))
I replaced 1:1 (in the COLUMNS operand) which was modified during the fill down process by $1:$1 which remains unchanged.
As I am lazy, I modified the last reference to the tables so it is automatically adjusted during the fill down process (my tables are named Tableau 1 thru Tableau 10).
Yvan KOENIG (from FRANCE dimanche 6 juillet 2008 16:27:30)

Similar Messages

Display last value from a row or column?

I'm using Numbers 09 and want to display the last value entered in a column in another table.
For example in Table A I have columns set up by date with simple sums at the bottom of each column. I add new sums every day depending on the values from that day. What I'd like to do is get the last daily total and enter that value into another table called Table B. Is there a formula that will do that?
If I'm not being clear enough please let me know what additional information you need and I will be happy to provide it.
Thanks,
rkaufmann87

rkaufmann87 wrote:
Hi Barry,
Thanks for posting the example, not quite though. In your sample Table A is transferring all the totals to Table B. What I'd like is as I enter the data in the columns in Table A Table B then picks up the latest update in a single cell. For example lets say Table A's Column A is May 1 and the total is 45, let's say that sum is placed in A15. Table B automatically picks up A15 from Table A and makes a duplicate in Table B cell A1, then the next day Table A's Column B is May 2 and the total is 90 (cell B15), then Table B senses the latest total is 90 and enters that in cell A1 again. Is this possible?
Here's another go.
Table 1 has a second Header row added (row 2) Cells in this row contain the formula
=IF(A1=MAX($1:1),COLUMN(),"")
Which returns the column number of the cell in row 1 containing the latest date. (4) This number is used by Table 2 to determine the column from which to return the total in the bottom (footer) row. (see below)
A1 in Table 2 and Table 3 contain the same formula:
=MAX(Table 1 :: $1:1)
This returns the latest date from row 1 of Table 1.
A2 in Table 2 and Table 3 contain formulas that return the value in the bottom cell of the column containing the latest date in row 1.
Table 2: =OFFSET(Table 1 :: $A$1,ROWS('May 1, 2010')-1,MAX(Table 1 :: $2:2)-1)
Table 3: =OFFSET(Table 1 :: $A$1,ROWS('May 1, 2010')-1,COUNT(Table 1 :: $1:1)-1)
Both use the same base ($A$1) and the same row offset (ROWS('May 1, 2010')-1) to reach the bottom row of Table 1.
Table 2 uses the maximum (and only) numerical value in row 2 of Table 1 ( MAX(Table 1 :: $2:2) ), then subtracts 1 to reach the fourth column of table 1.
Table 3 uses the same means to determine the row offset, but counts the number of dates entered into row 1 of Table 1 ( COUNT(Table 1 :: $1:1) ), then subtracts 1 to reach the same cell.
I prefer the method in Table 3 because it avoids the need for the second Header row and the possibility of overwriting the formulas in that row. (Row 2 of Table 1 may be deleted without affecting Table 3.) It does require that there be no empty cells in Row 1 from Column A to the column containing the latest date.
Regards,
Barry

How do I read text from specific rows and columns in a tree structure?

How do I read text from specific rows and columns in a tree structure? In a table you can specify the cell to read from but I have not been able to figure out how to do this with a tree structure.

You need to set two properties to activate the correct cell and then you can read it's string property.
The positioning properties are the "ActiveItemTag" and
"ActiveColNum" properties. With them you select the tree item by it's tag and the active column. The string can then be read from the "Cell String" property.
MTO

Why do i get 2 curves and not just 1 when i create a diagram from a row of data in a table ?

Why do I get 2 curves and not just i when I create a diagram from a row af data in a table ?

Erik,
Thank you for giving me the points. Generally you wait to award points until your problem is solved. It is totally your at your descretion.
OK.
This is still not clear. To post a screenshot get the "stuff" you want to show in view on your screen, then type the key combination <Command>+<Shift>+3. The cursor will change to a crosshair. Click and hold on the top-left corner, then drag to enclose what you want to show (to the bottom-right corner), then release. The screenshot will appear on your desktop and will be named something like "".
Now click the camera icon in the tool bar for this forum:
, click the text box to allow you to navigate to, and select your screenshot.
Here is what you sent me:
The graph does not seem to be associated with the table of data you are showing. Generally when you highlight a graph the corresponding table will highlight and show the source of each of the series in the graph (dark and light blue).
This is what I would expect to see when highlighting a graph:
Right now I think there is ANOTHER table arround that is the source for the graph and the table you show is "just another table". You can move your data into the table the graph refers to by copy and paste, or simply typing the values. You can change how many series there are by grabbing the little circle at the bottom right of the highlighted cells (when you have the graph highlighted) and dragging as shown:
The Numbers Users' Guide is a great resource you should utilize and can be found here:
http://support.apple.com/manuals#macosandsoftware
The chapter on graphing (or charting) is 7 and starts on page 134.

How to convert rows to columns of a table?

I want to convert rows to columns of a table..
Query in SQL??

965373 wrote:
I want to convert rows to columns of a table..
Query in SQL??PIVOT by Frank Help for a query to add columns
PIVOT by TomK http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:766825833740

Copy selected values from a table control into another table control

hi there,
as seen in the subject i need to copy selected values from a table control into another table control in the same screen. as i dont know much about table controls i made 2 table controls with the wizard and started to change the code... right now im totally messed up. nothing works anymore and i don't know where to start over.
i looked up the forums and google, but there is nothing to help me with this problem (or i suck in searching the internet for solutions)
i have 2 buttons. one to push the selected data from the top table control into the bottom tc and the other button is to push selected data from the bottom tc into the top tc. does somebody has a sample code to do this?

you're funny
i still don't get it... can't believe, there is no tutorial or sample code around how to copy multiple selected rows from a tc.
here's my code, maybe you can tell me exactly were i have to change it:
tc1 = upper table control
tc2 = lower table control
SCREEN 0100:
PROCESS BEFORE OUTPUT.
MODULE status_0100.
MODULE get_nfo. --> gets data from the dictionary table
MODULE tc1_change_tc_attr.
LOOP AT   it_roles_tc1
       INTO wa_roles_tc1
       WITH CONTROL tc1
       CURSOR tc1-current_line.
ENDLOOP.
MODULE tc2_change_tc_attr.
LOOP AT   it_roles_tc2
       INTO wa_roles_tc2l
       WITH CONTROL tc2
       CURSOR tc2-current_line.
ENDLOOP.
PROCESS AFTER INPUT.
LOOP AT it_roles_tc1.
    CHAIN.
      FIELD wa_roles_tc1-agr_name.
      FIELD wa_roles_tc1-text.
    ENDCHAIN.
    FIELD wa_roles_tc1-mark
      MODULE tc1_mark ON REQUEST.
ENDLOOP.
LOOP AT it_roles_tc2.
    CHAIN.
      FIELD wa_roles_tc2-agr_name.
      FIELD wa_roles_tc2-text.
    ENDCHAIN.
    FIELD wa_roles_tc2-mark
      MODULE tc2_mark ON REQUEST.
ENDLOOP.
MODULE ok_code.
MODULE user_command_0100.
INCLUDE PAI:
MODULE tc1_mark INPUT.
IF tc1-line_sel_mode = 2
AND wa_roles_tc1-mark = 'X'.
    LOOP AT it_roles_tc1 INTO g_tc1_wa2
      WHERE mark = 'X'.    -
> big problem here is, that no entry has an 'X' there
      g_tc1_wa2-mark = ''.
      MODIFY it_roles_tc1
        FROM g_tc1_wa2
        TRANSPORTING mark.
    ENDLOOP.
ENDIF.
MODIFY it_roles_tc1
    FROM wa_roles_tc1
    INDEX tc1-current_line
    TRANSPORTING mark.
ENDMODULE.                    "TC1_MARK INPUT
MODULE tc2_mark INPUT.
IF tc2-line_sel_mode = 2
AND wa_roles_tc2-mark = 'X'.
    LOOP AT it_roles_tc2 INTO g_tc2_wa2
      WHERE mark = 'X'.             -
> same here, it doesn't gets any data
      g_tc2_wa2-mark = ''.
      MODIFY it_roles_tc2
        FROM g_tc2_wa2
        TRANSPORTING mark.
    ENDLOOP.
ENDIF.
MODIFY it_roles_tc2
    FROM wa_roles_tc2
    INDEX tc2-current_line
    TRANSPORTING mark.
ENDMODULE.
thx for anybody who can help with this!

Need to compare values in two columns of one table against values in two columns in another table

Hi, as the title reads, I'm looking for an approach that will allow me to compare values in two columns of one table against values in two columns in another table.
Say, for instance, here are my tables:
Table1:
Server,Login
ABCDEF,JOHN
ABCDEF,JANE
FEDCBA,SEAN
FEDCBA,SHAWN
Table2:
Server,Login
ABCDEF,JOHN
ABCDEF,JANE
FEDCBA,SHAWN
In comparing the two tables, I'd like my query to report the rows in table1 NOT found in table2. In this case, it'll be the 3rd row of table one:
Server,Login
FEDCBA,SEAN
Thanks.

create table Table1([Server] varchar(50), Login varchar(50))
Insert into Table1 values ('ABCDEF','JOHN'),('ABCDEF','JANE'),('FEDCBA','SEAN'),('FEDCBA','SHAWN')
create table Table2([Server] varchar(50), Login varchar(50))
Insert into Table2 values ('ABCDEF','JOHN'),('ABCDEF','JANE'), ('FEDCBA','SHAWN')
select [Server] ,Login from Table1
Except
select [Server] ,Login from Table2
select [Server] ,Login from Table1 t1
where not exists(Select 1 from Table2 where t1.[Server] = t1.[Server] AND Login=t1.Login)
drop table Table1,Table2

Inserting results from select query into another table

Hi: Is there a way to insert results returned from a SQL query into another table within the same SQL statement.
For example
SELECT a.SRCID,
SUM(DECODE(a.CLASS_ID,91147,1,0)) BLOCK,
SUM(DECODE(a.CLASS_ID,91126,1,0)) ALLOW,
FROM EVENT_DATA a
where
a.class_id in (91147,91126)
GROUP BY SRCID
order by TOTAL DESC;The columns returned SRCID, BLOCK and ALLOW need to go into another table called AGGREGATE_COUNT. This table has fields SRCID, BLOCK and ALLOW. Or is the only way this can be done from outside of SQL like using perl or C.
Thanks
Ray

INSERT INTO aggregate_count
     ( chart_id
     , srcid
     , block
     , allow
SELECT 2234 chart_id
     , srcid
     , SUM(DECODE(class_id, 91147, 1, 0))
     , SUM(DECODE(class_id, 91126, 1, 0))
FROM event_data
WHERE class_id IN (91147, 91126)
GROUP BY chart_id, srcid
ORDER BY total DESC;

How could I insert the deleted row into another table within a trigger?

Hi,
How could I insert the deleted row into another table within a trigger? The destination table has the same columns as the source table. Since the statements are in the trigger, it is not allowed to query the source table named 'test'. Thanks! The trigger is as follows, uncompleted:
CREATE TRIGGER delete_trigger
AFTER DELETE
ON test
FOR EACH ROW
BEGIN
-- How could I insert the deleted row into another table
END delete_trigger;
Message was edited by:
user569548

Hi,
I'm not sure what's wrong there.
I read the oracle docs about ANALYZE and ALL_TAB_COLUMNS, and did the following:
ANALYZE TABLE my_tab VALIDATE STRUCTURE; //went ok.
SELECT column_name
FROM all_tab_columns
WHERE table_name = 'my_tab'; //but no rows selected?
This topic might not be what this thread should be about. Here I posted a new thread:
How to get colum names of the newly created table?
Thanks.
Message was edited by:
user569548

Need help in SQL Query: Update a row in a table & insert the same row into another table

I want to update a row in a table say Table A and the updated row should be inserted into another table say Table B. I need to do it in a single SQL query and i don't want to do it in PL/SQL with triggers. And i tried with MERGE statement but its working with this scenario. (Note: I'm using Oracle Database 10g Enterprise Edition Release 10.2.0.1.0).
Thanks in Advance.

Using Sven's code as an example, you could save the updated row in a sql plus variable. (also untested):
SQL> var v_id number
update tableA
set colB='ABC'
where colC='XYZ'
returning id into :v_id;
insert into table A_History (ID, colA, colB, ColC)
select id, ColA, ColB, ColC
from tableA
where id = :v_id;

Multi-row uipdate with an insert into another table [I think]

Folks,
I'm trying to get a multi row region with a checkbox against each row. When a user checks a box I want to insert a corresponding row into another table. So I've tried to simplify the questions and distill the problem down using the EMP table.
So, here goes:
I have table EMPS, which looks like this:
EMPNO     Number
FIRSTNAME     Varchar2(9)
LASTNAME     Varchar2(10)
HIREDATE     Date
I have table EMP_CANDIDATES, which looks like this:
EMPNO     Number
SELECTION_DATE     Date
NOTES Varchar2(53)
- I want to create a multi-row region based on EMPS, with a checkbox on each employee row.
- The user should be able to select any number of employees in the region and then press submit.
- on-submit there needs to be a process, which inserts a record into EMP_CANDIDATES for each checked employee.
I've tried pre-populating a collection with the EMPS records and using apex_item.checkbox to produce a checkbox, using this code:
=============
if apex_collection.collection_exists(p_collection_name=>'EMPS') then
apex_collection.delete_collection(p_collection_name=>'EMPS');
end if;
apex_collection.create_collection_from_query(
p_collection_name=>'EMPS',
p_query=>'select
p.empno,
p.hiredate,
p.firstname,
p.lastname,
null selection
from emps p');
=========
I can create a report region on this using tthe following SQL:
select c001 empno
, c002 hiredate
, c003 firstname
, c004 lastname
,apex_item.checkbox(1,c005) selection
from apex_collections
where collection_name ='EMPS'
======
So how do I now get a MRU that will insert a row into EMP_CANDIDATES for each checked row in my region? Or have I gone about this the wrong way?
TFH
Derek

Hi Derek,
Firstly, your checkbox should be on the c001 field as this is the one that contains your empno.
Then, you need a page process that can be triggered by a button. The process should be set to run "On submit (After computations and validations)" and the PL/SQL code would be something like:
DECLARE
v_empno NUMBER;
BEGIN
IF HTMLDB_APPLICATION.G_F01.COUNT = 0 THEN
raise_application_error(-20001, 'Please select at least one employee!');
END IF;
FOR i IN 1.. HTMLDB_APPLICATION.G_F01.COUNT LOOP
v_empno := TO_NUMBER(HTMLDB_APPLICATION.G_F01(i));
INSERT INTO EMP_CANDIDATES VALUES (v_empno, whateverdate, whatevernotes);
END LOOP;
END;
This will firstly count the items that have been ticked - if there aren't any, the user gets an error message. If there is at least one item ticked, the code will loop through these, get the empno relating to the ticked box and insert a record into the emp_candidates table. Please note that no account is taken here of any validation on this second table - if you need to ensure, for example, uniqueness of records in this table, you will have to update the above to perform this validation.
Regards
Andy

Generate xml from a table and insert the xml into another table

I want to generate an xml file from a table and insert it into another table all in one tsql
insert into table B(xmlfile)
select * from tableA
FOR
XML
PATH('ac'),TYPE,ELEMENTS
XSINIL,ROOT('Accum')
Is not working any help

I have solved my issue all I did was to change my column datatype to xml

Inserting data from one table into another table using PL/SQL

HI,
I am trying to insert values from one table into another using PL procedure, the values I want to retrieve from the table riverside1 are charac_id and charac_type and insert these values into another table called riverside2 , the stored procedure zorgs_gorfs(x,y) accepts two parameters which are 2 charac_id's of d characters in riverside1 then using insert statements inserts these characters from riverside1 into riverside2.
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id)
          VALUES
               (x);
INSERT INTO riverside2
               (charac_id)
          VALUES
               (y);
      END zorgs_gorfs;
/This works but the problem im having is that when I also try to insert the charac_type as well as the charac_id it doesnt work below is the code:
CREATE OR REPLACE PROCEDURE zorgs_gorfs(x IN NUMBER, y IN NUMBER) AS
     BEGIN
          INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);
      END zorgs_gorfs;
/can someone kindly sort me out

modify this sql
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id = x);as
INSERT INTO riverside2
               (charac_id,charac_tye)
          VALUES
               (Select
                    charac_id,
                    charc_type
               FROM
                    riverside1
               WHERE
                    charac_id in ( x,y));But my suggestion would be consider revising your approach. It does not look that good.
Thanks,
karthick.

How to get the data from one table and insert into another table

Hi,
We have requirement to build OA page with the data needs to be populated from one table and on save data into another table.
For the above requirement what the best way to implement in OAF.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
Thanks

You can achieve this in many different ways, one is
1. Create another VO based on the EO which is based on the dest table.
2. At save, copy the contents of the source VO into the dest VO (see copy routine in dev guide).
3. commiting the transaction will push the data into the dest table on which the dest VO is based.
I understand that if we attach VO object instance to region/page, we only can pull and put data in to only one table.
if by table you mean a DB table, then no, you can have a VO based on multiple EOs which will do DMLs accordingly.Thanks
Tapash

How do I move all my files from one User Profile (account) into another? I needed to create a new account and want all of my files accessible in the new one.

How do I move all my files from one User Profile (account) into another?
I needed to create a new account and want all of my files accessible in the new one.

ok, what you're learning right now is 101 unix, which is good. Unix is a good thing
now: the way unix works, and macos (which uses unix underneath) the files and folders work like a hierarchy.
the start of that tree is /
so, if you were to do:
cd /
(cd means change directory)
it will bring you at the highest branch of the file system.
cd /Users
will bring you to where all the users are.
to see whats in /Users you can use your friend ls command
ls means list files/directories
so:
cd /Users
ls -la
(the -la here means show all (even hidden) and long format (very verbose)) this flag is very optional.
you will see
fred
user2
for example.
if you want to see the desktop of user2 you would change directory to it then list the files.
for example:
cd /Users/user2/Desktop
Note that the files and directory are case sensitive, so, desktop is NOT the same as Desktop, or DESKTOP
ls -la
you should then be able to see everything in users2 desktop
you could have done as well the same thing in smaller steps, for example:
cd /
cd Users
cd user2
cd Desktop
this is the equivalent of cd /Users/user2/Desktop
So, for your file, i don't know where it was, but know that if you log in as user2, it will directly put you in
/Users/user2
which most likely the file you had created from the other user was in /Users/user1
if you copied all the files from /Users/original_user to /Users/secondUser
most likely yes, all your mail, bookmarks etc would be copied over.
so in your case.
sudo chown -R seconduser:staff /Users/secondUser
should work
Remember that if you start a path with the character / it means start from the root of the file system, at the highest top you can ever get.
so
cd /Users/fred
is not the same as
cd Users/fred
unless you were in / already
i know it may be confusing at first but it's actually very logical if you play with it.
to simplify, think of it that / means C:\ on windows
you can't go any higher than C:\ (in a way)
if you're unsure which directory you're currently in, you can always type:
pwd
it will tell you where you are.
for example:
cd /
pwd
this shows /
cd Users
pwd
this now shows /Users
cd /System/Library
pwd will show /System/Library
cd /
cd /Users
cd fred
cd Library
pwd will show /Users/fred/Library
unix can look very scary but it's actually vital and very necessary to do tasks sometimes that would take for ever to do via the windows. This is good learning.
so for the myfile you had created, i can't tell you where it is, at the time you created, if you can do a pwd command you'll know the path,
ls -la (this shows all the files where you are)
if you see myfile in the list
do a pwd
whatever is return, the real location of the file would be:
whatever pwd returned / myfile
I hope that makes sense.

Total Last Cell from last row, last column into another table

Similar Messages

Maybe you are looking for