Total Score in Sum Total not correct

We are using Captivate 4 and the Sum Total LMS. Our course consists of 2 lessons which are not scored and an assessment which is scored. The settings for the lessons are Slide Views Only so the lessons have the Topic Status Complete or Incomplete on the Sum Total LMS Learning Activity Progress Detail page, with the Score % blank. The assessment also has Topic Status Complete or Incomplete, and also a Score % (80% required to pass). The Topic Status and Score % values are correct for the lessons and the assessment, however the Total Score is not correct. When the user completes the 2 lessons and the assessment with a score of 100%, the Total Score shows as only 33%. So it seems that Sum Total is including the lessons in the Total Score, and calculating the Total Score by (100+0=0)/3 = 33%, i.e. assigning 0% to the lessons even though the Score % is blank for the lessons.
Is there a way to have the Total Score be just for the assessment? If the user scores 100% on the assessment we would like the Total Score to be 100%.

Hi,
Can you make your question more clear, it is not clear what is you requirement exactly.
'.Total stock not issued from gate in stock.' : Yuou mean to say GR made with 103 but 105 not done for that
or Total stock in store but not issued yet ) : there is no GI with any movemen type ??
regards,
zafar

Similar Messages

Appraisal Total Score & Overall Score Calculation

Dear All,
While Manager is initiating the appraisal total Score & Overall Rating is not calculating though I have attached a formula.
here im using 12.0.6 please help me in resolving this issue.
Thanks in Advance
Regards,
Jithin

I am also facing same problem , I am able to calculate the total of employee created objects but I am unable to calc the total of manager created objects ,
Can any one suggest me ...........

The page total amount is not correct on discoverer plus 10.1.1.48.18

on my discoverer report, there is sunnary field based on a column.
for example, I have a salesrep expense discoverer report.
the salesrep name is the page item, each page has one salesrep, under the page item there are many line which show the expense detail amount, there is a column called expense, under the expense column there is a total amount summary field to sum the expense for this salesrep.
Sometimes, the total amount is not the sum of the expense column, sometimes the total amount show negative zero as: -0.00. What I thought this maybe a number round issue.
Does anybody has similar issue? how to fix this ?
Thanks

I actually used toad to run the query and exported to EXCEL then sum it in excel, I got the correct total amount.
the following is the SQL query, we use the total feature to sum the commission:
select
pt.payee_salesrep_id,
sr.name||','||sr.attribute9 salesrep_name,
sr.attribute15 employee_number,
pt.payrun_id,
pr.name payrun_name,
decode(pt.incentive_type_code,'COMMISSION',2,'PMTPLN',4,'PMTPLN_REC',1,'MANUAL_PAY_ADJ',2) Sort,
decode(pt.incentive_type_code, 'PMTPLN','To be Applied in Future','PMTPLN_REC','Previous Payments Affecting Commissions',q.description) Variable,
sum(decode(pt.incentive_type_code,
'COMMISSION',decode(q.attribute3,'ARR 12-36',apps.sg_oic_reports.get_multiple(q.name,to_number(ch.attribute16)),1) sign(pt.payment_amount) abs(pt.input_achieved) ,
pt.payment_amount)
) Revenue,
sum(pt.payment_amount) commission
from apps.cn_payment_transactions pt,
apps.cn_commission_headers ch,
apps.jtf_rs_salesreps sr,
apps.cn_quotas q,
apps.cn_payruns pr
WHERE pt.quota_id = q.quota_id
and ch.commission_header_id(+) = pt.commission_header_id
and pt.payee_salesrep_id = sr.salesrep_id
and pt.payrun_id = pr.payrun_id
and hold_flag <> 'Y'
and pr.accounting_period_id>2005012
and pt.payment_amount<>0
group by
pt.payee_salesrep_id,
sr.name||','||sr.attribute9,
sr.attribute15,
pt.payrun_id,
pr.name,
pt.incentive_type_code,
decode(pt.incentive_type_code,'COMMISSION',2,'PMTPLN',4,'PMTPLN_REC',1,'MANUAL_PAY_ADJ',2) ,
decode(pt.incentive_type_code, 'PMTPLN','To be Applied in Future','PMTPLN_REC','Previous Payments Affecting Commissions',q.description)
having sum(pt.payment_amount) <>0

Incrementing Total not correct(adding +1) in some group totals

Hi All,
I have an incrementing total that appears to work fine except when I try to display the total's final count only SOME groups have a +1 count. There doesn't seem to be a logical reason for it.
Any ideas?
Incrementing total formula:
Whileprintingrecords;
if Not({Command.BI_UPD_DT_TM} > {@f_ConvertRevYrMo_DtTm})
then
Global numbervar memberlinecnt := memberlinecnt +1
else
memberlinecnt+0;
Formula to call incrementing total's final group total:
Global numbervar memberlinecnt:={@f_RRTMemberIncrement};
memberlinecnt;
Note: I've not been able to use Running Total fields with this report because I need to evaluate totals based on group criteria and there are multiple groups and criteria.

Hi Sharon,
I do have a reset, just didn't include it in my post.
Reset
//@Reset (Place this in the group header section suppressed)
WhilePrintingRecords;
Global NumberVar memberlinecnt:= 0;
Like I said,the whole thing appears to work, counting for ever group, resetting; except for only some groups, the total is +1 of the total. I don't know why.
Thanks,
John

There is an error in the sum total displayed in infoty type 8.

Hi,
In infotype 8 there is an error in the sum total . Recently few wage types were added in the system.
Now the total amount of all the wagetypes is not displayed correct.
please tell me is there any functional aspect through which it can be corrected.

2BAS     Basic Salary          30.964,00      INR
2HRA     House Rent Allowance     15.482,00      INR
2SPL     Special Allowance          871,00      INR
1LTA     Leave Travel All. (CTC)     2.580,00      INR
1DRI     Driver's Pay Reimb. (CTC)     6.000,00      INR
1MED     Medical Reimb. (CTC)          1.250,00      INR
1PET     Petrol Reimb. (CTC)          4.000,00      INR
1GRA     Gratuity (CTC)          1.489,00      INR
1LEN     Leave Encashment (CTC)     300,00      INR
1BON     Bonus(CTC)          6.881,00      INR
1IMC     Medical Insurance (CTC)     179,00      INR
IV 24.10.2008 - 31.12.9999                 * 47.317,00 INR*
Here the total amount for all the wage types is incorrect. This is my problem. How to correct the displayed total amount.

Any method to create a SUM Total for a column whose values based on LAG?

I have a question here, and the challenge is to explain my situation well. I am trying to develop a workbook that shows by project and month, the cost this period and the change in cost from the prior period. I want a SUM total on the Cost This Period and Cost Change From Prior Mth columns. So what I want to do looks something like this -
Project Month Cost This Period Cost Chg from Prior Mth
ABCDE Jan $50,000 NULL (since no preceeding row)
ABCDE Feb $75,000 $25,000
ABCDE Mar $60,000 -15,000
Total $185,000 $10,000
I do the Cost Chg from Prior Mth as a new calculation, and use the Insert Formula from Template process to use the F(x) Difference template to create my calculation. That is working just great. If you look at the underlying code for this new column, you can see the LAG function being utilized in calculating this value. I am lagging one row, as you can see from the example above.
I can create a new total and do a SUM for the Cost This Period column and get the correct answer (the $185,000).
The problem I am running into is that I am not getting anything when I try to sum my Cost Chg from Prior Mth column. The result is just blank (does print the total's text, but no amount).
My thought is that the NULL row in this column was messing up the SUM from working. So I created a new calculation and said CASE WHEN Cost Chg from Prior Mth IS NULL THEN 0.00 ELSE Cost Chg from Prior Mth. So I get a new column with the same numbers except for the first row, where I now have a 0 instead of NULL. I then created a new total (SUM function) on this brand new column. Darn. Same result as for the other column. I do not get an amount.
Has anyone else run into an issue with trying to sum up a column of numbers that are being calculated from a LAG function in Discoverer? Any suggestions on how I could get a SUM to properly calculate for this Cost Chg from Prior Mth column? Or have I run across one of those irritating "cannot handle in Discoverer" issues?
Of course I can export the workbook run results to Excel and create the calculation in there, and that works just fine.
John Dickey

Hi John
Thanks for the question and the great information. That really helped. I love these kinds of questions. They make me think :-)
Just a thought but have you tried altering the SUM to be a CELL SUM?
The SUM will try to evaluate the LAG over the total which would be invalid whereas, at least in theory, the CELL SUM should literally add the values.
Best wishes
Michael

SSRS 2008 R2 Report - Sum Totals of a Filtered Group

I'm at a loss here, so any help will me much appreciated. I will do my best to explain, but if you need additional information, please let me know:
I have a very large dataset of patient data. Specifically for the numbers I need, I have a patient number field, a county field, a 1 or 0 for LastYear field, and a 1 or 0 for CurrentYear field.
Example:
PtNo    County PY CY
45676 Scott     0    1
45322 Cape     1     0
47686  North     0     1
The thing I am shooting for on my report is, "Volume growth in 3 counties (+20 cases)."
I created a group and grouped by County (group name County) and I included a group filter to only include "total cases of CY" are greater than "total cases of PY" to narrow my data to only counties that had a higher current year sum
than previous year sum.
Example:
County PY    CY Difference
Scott    141 143     2
Cape     90    98      8
North    78     88    10
All is working well, except I don't need to see the Counties themselves, I just need the 3 counties and a difference of 20.
I explored online and found tutorials that said to right click on the field and select "Add Total" but this total did not have my filter in it and gave me everyone. I also tried adding a row outside the group and used the RunningValue function
(i.e. RunningValue(Fields!FYTD_Current_Year.Value, Sum, "County"))  but it gave me a message that states "The Value expression for the text box 'Textbox456' has a scope parameter that is not valid for an aggregate function. The scope
parameter must be set to a string constant that is equal to either the name of a containing data region or the name of a dataset."
When I move the row with the RunningValue function inside the group, it runs but I get the same information repeated twice for each county with no final total.
So I am not sure how to go about getting my values I need for my report. Anybody know how to resolve this?
Thanks,
Cyndi
cpemtp1

Hi Cyndi,
Based on my understanding, you specify a filter condition in group properties. Then you want to sum the filtered values for each field.
In this scenario, we need to specify a filter condition on group level. If we use sum() function out of group, the expression will calculate the total values on dataset level instead of group level. So we can’t simply use expression to achieve this goal.
However, we can use custom code to record the filtered values for each field, then we can calculate the total based on these values. Please refer to the steps and screenshots below:
1. Add the custom code below into the report:
Public Shared Value1 as Integer=0
Public Shared Function GetValue1(Item as Integer) as Integer
value1= value1 + Item
return Item
End Function
Public Shared Function GetTotal1()
return value1
End Function
Public Shared Value2 as Integer=0
Public Shared Function GetValue2(Item as Integer) as Integer
value2= value2 + Item
return Item
End Function
Public Shared Function GetTotal2()
return value2
End Function
2. Design the tablix like below:
3. The result looks like below:
If you have any question, please feel free to ask.
Best regards,
Qiuyun Yu

Adding Sum Totals from Multiple Tables in A single Document

Hello All,
I'm having trouble adding sum totals from multiple tables I've created in a Pages 09 doc. I putting together a spreadsheet for cost projections for a house remodel. I created tables for each room of the house. At the bottom of the document I'd like to have another table that takes the totals from each individual room and adds them up. Problem appears to be that each table has the same x/y axis labels so row and column numbers/letters are repeated so the final table can't quantify thing correctly.
Any easy solutions? I can't find anything that's helped in my search efforts.
Thanks,
Josefis

Jerry,
Thanks for the feedback. I thought that might be the case. And you were correct to assume I was more comfortable in Pages. I'm halfway through converting everything to numbers. In the end it will work great too. Just some different formatting/design choices to be made as numbers doesn't appear to be as versatile in the same way pages is with design. So far it looks pretty good though.
Thanks again,
Josefis

Sorting of Sum Totals at category & subcategory levels in Answers -Resubmit

I am resubmitting this as there with some alignment issues in the previous text. I am not able to get it in proper order here so have identified the category & sub category by bold & italics.
I have a requirement where i need to sort by $$ within a category and sub category, first i need to show the highest YTD $$ under the category with total & the sub categories also should be sort as given in the example, GM having the highest value is in top, in the same way AT&T having the highest value is at the top.
Category Sub Category YTD $$ by S
Automobile GM 12000
Toyota 10000
Honda 8000
Automobile Total 30000
Telecom AT&T 10000
Verizon 8000
Sprint 5000
Telecom Total 23000
I am able to achieve this if i do it at the Category level, and the sub category is sorted in alphabetical order and not by YTD $$ and the moment i add the sorting to the Sub category, it shows category & the sub category totals as individual line items instead of single category & multiple sub-categories .
Thanks again for your time & help!!

Thanks for the response, i can only select a value from the dimension if i select Sort Order, but the YTD value is from the fact. Let me try to show the requirement here again as in the last mail somehow the format was not correct. The text in bold refers to the Category & the text in italics refers to the sub category.
Category Sub Category YTD $$ by S
Automobile GM 12000
Toyota 10000
Honda 8000
Automobile Total 30000
Telecom AT&T 10000
Verizon 8000
Sprint 5000
Telecom Total 23000
The category with the largest total should be at the top and within the category, the sub category with the max $$ should be at the top.

Sorting of Sum Totals at category & sub category levels in Answers

I have a requirement where i need to sort by $$ within a category and sub category, first i need to show the highest YTD $$ under the category with total & the sub categories also should be sort as given in the example, GM having the highest value is in top, in the same way AT&T having the highest value is at the top.
Category Sub Category YTD $$ by S
Automobile GM 12000
Toyota 10000
Honda 8000
Automobile Total 30000
Telecom AT&T 10000
Verizon 8000
Sprint 5000
Telecom Total 23000
I am able to achieve this if i do it at the Category level, and the sub category is sorted in alphabetical order and not by YTD $$ and the moment i add the sorting to the Sub category, it shows category & the sub category totals as individual line items instead of single category & multiple sub-categories .
Thanks again for your time & help!!

Thanks for the response, i can only select a value from the dimension if i select Sort Order, but the YTD value is from the fact. Let me try to show the requirement here again as in the last mail somehow the format was not correct. The text in bold refers to the Category & the text in italics refers to the sub category.
Category Sub Category YTD $$ by S
Automobile GM 12000
Toyota 10000
Honda 8000
Automobile Total 30000
Telecom AT&T 10000
Verizon 8000
Sprint 5000
Telecom Total 23000
The category with the largest total should be at the top and within the category, the sub category with the max $$ should be at the top.

How to Suppress Report Total When Using Sum on Columns & Break Formatting

I need to know how to NOT show the report total line when using the sum functionality with a break in a report.
I am summing two columns, a debit amount and credit amount. I am breaking on the first column which is the level of a hierarchical query. I want to see something like this:
Parent Record xxxxxxxxxxxxxx
Parent Sum $$ $$
Child Record xxxxxxxxxxxxxx
Child Record xxxxxxxxxxxxxx
Child Sum $$ $$
However, when I run the report, I also get a report total line under the child sum which is really meaningless for this report.
I have also tried creating this report as an interactive report. When applying the sum on the two columns, I do get the sum totals on the break only - no report total - however, it is reversing the order of the hierarchical query results putting the child records first and the parent records second.
Thanks in advance for your help.

Hi, and welcome!
I don't think that there's an easy way to "switch off" the Total line on a report. The nearest I could suggest would be to either hide the entire row or colour the text so that it's the same as the background - either way, the total is calculated but the user won't see it.
If you put something like the following into your report region's Region Footer:
<script type="text/javascript">
var outertable = document.getElementById("#REGION_ID#");
var innertable = outertable.getElementsByTagName("TABLE")[1];
var rs = innertable.rows;
var lastrow = rs[rs.length-1];
if (lastrow.cells[0].innerHTML == '<b>TOTAL</b>')
rs[rs.length - 1].style.display = "none";
</script>Then, on your report's Report Attributes page, scroll down to the Break Formatting section and put TOTAL into the "Display this text when printing report sums" setting. Also, in the "Layout and Pagination" section, set "Enable Partial Page Refresh" to No.
The above code is based on the report and region templates that I'm using here: [http://apex.oracle.com/pls/otn/f?p=267:147] (Theme 18, "Report Region" region template and "Standard" report template). Your report may use different templates, so the first two lines on the code may have to change. #REGION_ID# would be replaced with the region's ID value (which would be "R" followed by a long number). As long as you can identify the HTML tag that uses this ID value, you can then get to the actual table that contains the data as it would be a TABLE within that tag - the [1] above is the second table within the region. In some instances, you may have to use "region_#REGION_ID#" as the starting point.
Andy

Need a formula to calulate multiple cells and add the sum total to a cell in a other table

Im a chef and my monthly inventory is a time consuming task. I get invoices from multiple suppliers on each day of the week. I enter them into a spread sheet and then need to add the sum total for all the invoices for say MONDAY. That total needs to be entered into a cell in another table called "daily spend". Is there a formula to automatically add say all the invoices from monday and input the daily spend cell on that table. Here is an example
I created a column B-to give each day a number(sometimes multiple invoices come from the same supplier for each day)<GREEN>..If there was a way to do this differently...Im happy to change the layout of the spreadsheet. I want to add the total $ (column F) for each day together(all the blue fields) and then insert the total into another cell seen in the next table . So in this example its F4+F16+F17=?, ? inserted into N2 of the next table
Thanks so much

"I ve finally has a play with the advice you gave me but I have realized that the formula you gave me is for a week....and like I mentioned in my reply to you, one table is weekly the other is monthly....is there a way to overcome this? (my answer to you explains it)"
Hi Gavin,
Unfortunately, the scale of your illustrations in that reply made them difficult (or impossible) to read, even on the Retina screen.
The first formula, used to fill column B, extracts the Weekday number for each date. Since these numbers should be equivalent to the day of the month, You'll need to replace this with a formula that returns the Day value of each date:
Old:
B2: =WEEKDAY(A,2)
New:
B2: =DAY(A)
Fill down to end of column.
Because of the arrangeent of your Data table, you will need to repeat this formula in column H (with references to column G), etc. for each set of dates in the table.
The SUMIF formula in column F is fine as is, except that it assumes all condition data will be in column B of Data, and all data to be summed will be in column F of Data. Since this is obviously not the case for your Data table, you will need a separate iteration of the formula for each week in the table, with the four SUMIF statements enclosed in a SUM statement:
E2: =SUM(SUMIF(Data :: $B,A2,Data :: $F),SUMIF(Data :: $H,A2,Data :: $L),SUMIF(Data :: $N,A2,Data :: $R),SUMIF(Data :: $T,A2,Data :: $X))
Fill down for as many rows as there are days in the month being summarized.
Column references in the formula assume that six columns are used for each week, and that there is no gap in the table between weeks.
Note that the formula does not distinguish between transactions on July 7 and those on June 7 or August 7. Because of this, the Data table must be limited to transactions in a single calendar month.
Regards,
Barry

Best way to add a score to a score box and total it up.

I am creating a game for children to make good food choices
for breakfast, lunch, dinner, and snacks. I need to have the food
choice add a value to a score box when clicked onto the plate and
subtract the same amount when clicked off. So far, all I have been
able to do is get the score to appear in the upper left hand
corner. When I can get the pancakes working properly, I will be
adding other foods which will do the same thing with different
numbers. The total score cannot go over 100. I am attaching the .as
code, but it is separate from the .fla and I'm not sure if I can
upload the .fla here.

That worked! Now, I have another problem I can't seem to
figure out--when I add another food, berries, all it is doing is
moving the pancakes and not itself! Here is the revised coding:
package
//import any class being used by this package
import flash.display.MovieClip;
import flash.text.TextField;
import flash.text.TextFormat;
import flash.events.MouseEvent;
public class MealGame extends MovieClip
//altered version
var offPlate:Boolean; //variable for food off the plate
var gameScore:int = 0;
public function MealGame()
//Create a score field for the pancakes.
var gameScoreField:TextField = new TextField();
// set the position values
gameScoreField.x = 445;
gameScoreField.y = 530;
//Show the score field
addChild(gameScoreField);
var tf:TextFormat = new TextFormat();
var scoreBox:Object = getChildAt(numChildren-1);
//scoreBox.x = 445;
//scoreBox.y = 530;
//Create a new instance of the meal class.
var pancakes1:Pancakes = new Pancakes();
var berries1:Berries = new Berries();
//Display the food on this stage.
this.addChild(pancakes1);
this.addChild(berries1);
//Position the food item.
pancakes1.x = 11;
pancakes1.y = 42;
berries1.x = 211;
berries1.y = 396;
offPlate = true;
//make the food item a button
pancakes1.buttonMode = true;
pancakes1.addEventListener(MouseEvent.CLICK, onClick);
berries1.buttonMode = true;
berries1.addEventListener(MouseEvent.CLICK, onClick);
//toggle the food item to put on plate or off the plate
//toggle adding to the score or removing from the score
function onClick(event:MouseEvent):void
if(offPlate)
pancakes1.x = 119;
pancakes1.y = 380;
berries1.x = 515;
berries1.y = 55;
//add to score
gameScore = gameScore + 50;
gameScoreField.text = " " + String(gameScore);
tf.font = "Arial";
tf.bold = true;
tf.color = 0x000000;
tf.size = 32;
//Take this text formatting object; apply it to the
textfield
gameScoreField.setTextFormat(tf);
//toggle the offPlate value
offPlate = !offPlate;
else
pancakes1.x = 11;
pancakes1.y = 42;
//berries1.x = 211;
//berries1.y = 396;
//remove from score
gameScore = gameScore - 50;
gameScoreField.text = " " + String(gameScore);
tf.font = "Arial";
tf.bold = true;
tf.color = 0x000000;
tf.size = 32;
//tf.x = 426;
//Take this text formatting object; apply it to the
textfield
gameScoreField.setTextFormat(tf);
offPlate = !offPlate;
}

I tRounding the Total Scores for Objectives and Competencies in Application

Hello
Where does one change the format of the total scores for the Overall Ratings and Comments - Objectives and Competencies in the front end /application?
Currently the total scores are in the format Objectives: Total Score 3.375
Competencies Total Score 2.69230769230769
HR want to show the Total Scores as rounded to 2 decimal places in the application so 3.375 becomes 3.38 and
2.69230769230769 becomes 2.70
Now i know how to do this in Toad using a select on the TOTAL_SCORE column in the hr.per_assessments table, but this is not i want to do here. Here i want to change the format in the FRONT END, not in the back end.
I tried the fast formulas but they dont seem to work unless i am missing something
Edited by: iandekoker on Apr 2, 2009 2:53 PM

in case anyone wondered you use the package called apps.hr_appraisals_util_ss. Inside the package you can add round(,2) to obtain the result

Grand Total Issue - Weighted Sum

Here's the Issue
3 Columns
Hours Worked, Pay Amount, and Pay Rate
20 10 $.50
Pay Rate is a calculated column from "Hours Worked" and "Pay Amount"
I'm trying to add the grand total to my work sheet for "Pay Rate"
Discoverer simply adds all of the "Pay Rate" values.
I would like the Pay Rate grand total to be "Pay Amount Grand Total" / "Hours Worked Grand Total"
Is this even possible?

If you're using 10g, take a look at your aggregation options (tools/aggregation). Since Pay Rate is a calculated column, there should be an option that forces it to do a calculation on the totals (rather than a total of the calculation). If you're on an older version, you may need to look into the aggregation-related registry settings/preferences. Also make sure you're doing a sum (not a cell sum).
That behavior seems to change from version to version but if you search on MetaLink you should find some version-specific help.

Total Score in Sum Total not correct

Similar Messages

Maybe you are looking for