Total weight in delivery document

Hi gurus,
  1. how total weight in delivery document is determined when i am doing multiple orders in single delivery.
  2. My requirement is to delete a delivery documnet but it was not deleting, i analised that " total weight in delivery document " usually determined " as "KG" but instead of "KG" UOM is determined as 3"(cubic inches).
anybody help me in this issue to solve this.
regards,
kishore.

Dear Kishore
Your UoM in delivery will always flow based on the weight details you maintain in material master Basic Data 1. 
In Delivery, you cant change the weight but can change in sale order.
Thanks
G. Lakshmipathi

Similar Messages

  • Weight of delivery showing zero

    Hi Gurus
    The issue we are facing is that  in case of a few deliveries the Total weight of delivery is showing ZERO instead of sum of weight of all items. In fact the gross weight of first line item is also showing zero. I checked material master, but the weight is maintained correcly  there. And also it is coming correctly in SO.
    This generally happens in case of materials managend in batches. I searched forum and only got to know that one possible reason could be copy control . But if that is the problem then it should happen in case of all delvieries whcih is not the case.

    Dear,
       As per your talk, I think there is only one reason ans that is material master. Please recheck material master.
    Regards,
    Sandip

  • Maximum "Total weight" LIKP-BTGEW in delivery

    The business requirement is as follows u2013 If the Total weight LIKP-BTGEW u2013 in the delivery, at header level - is greater than X kg. Then the user cannot save the delivery (i.e. create a delivery). The user shall get a popup saying u201CDelivery can not be created / saved because the Total weight is greater than X kgu201D
    Which program and userexit can I use?
    Many thanks, in advance!

    Hi
    Related with USEREXIT_MOVE_FIELD_TO_LIKP. It's true that this subroutine was designed to provide our own additional fields. If we modify standard field (not advisable), note says:
    If standard fields of the structure LIKP are changed, you may have
    to carry out determinations and checks that have already been
    performed again to avoid data inconsistencies. Therefore, analyze
    the dependencies before you change standard fields in the table
    LIKP in this exit.
    It goes on:
    Data from preceding documents should be prioritized and transferred
    using the copy control.
    so, the solution to solve it in copy rules in my opinion is the proper solution. I'm not sure if LIKP-BTGEW is populated in this moment
    So, create your own subroutine (999 for instance) with a coding as this:
    FORM bedingung_pruefen_999  USING bp_subrc LIKE sy-subrc.
    * Perform all checks as in routine 001
      perform bedingung_pruefen_001 using bp_subrc.
      check bp_subrc = 0.
      IF likp-btgew > your_weight.
        perform message_handling in program (programmname)
                                           using posnr_low
                                             '001'
                                             'E'
                                             'ZVL'
                                             'excess of weight'
                                             space
                                             space
                                             space.
        bp_subrc = 1.
        EXIT.
      ENDIF.
    ENDFORM.
    where you must create your own message ZVL in SE91 or other.
    Other suggestion is set a warning message in copy rules, and set the error message when you save it (think that it could be modify in a future). So use the USEREXIT_SAVE_DOC_BEFORE_PREP
    Purpose
    This routine can be used for the final change of all delivery data. At the
    time of the call, the delivery is complete and consistent; only the
    document number has not yet been determined in the creation case and the
    final processing of the requirements has not yet taken place. Therefore,
    changes to the delivery at this time must be made with particular care
    because no subsequent checks can prevent possible data inconsistencies.
    Since requirements processing has not yet occurred, this user exit is, in
    particular, suitable for changes relevant for requirements when the
    delivery is saved.
    Remeber to avoid messages during PGI. As it says:
    Display of messages
    With the output of messages or user dialogs, you must make sure that this
    exit can be run both in the dialog and in the background. In particular,
    during goods issue posting, messages or user dialogs must never be output
    because this may result in incorrect material documents.
    Regards
    Eduardo
    Edited by: E_Hinojosa on Nov 14, 2011 12:14 PM

  • What is the total weight and dimentions of a Mac Pro with retina 13"? Including any extra delivery packaging (i.e box, bubble rap, etc)? Thx

    What is the total weight and dimentions of a Mac Pro with retina 13" including any extra delivery packaging (i.e box, bubble rap, etc)? Thx

    What is the total weight and dimentions of a Mac Pro with retina 13" including any extra delivery packaging (i.e box, bubble rap, etc)? Thx

  • What INCLUDE calculates total Weight on Outbound Delivery?

    Hi,
    We have a bug in our Outbound Delivery "total weight" calc on the Item Overview tab.
    I need to locate the logic that calculates this value.
    Can someone please tell me the Include or Module where I might find the code that calculates this.
    The Delivery Program seems to be SAPMV50A, but I don't know how to locate the module or user-exit/enhancement within that program that calculates the value for this field.
    Hope that makes sense...thank you for your help.
    Andy
    Edited by: Andrew Brusko on Nov 17, 2011 2:48 PM
    Edited by: Andrew Brusko on Nov 17, 2011 2:49 PM

    Hi Andy,
    You may go ahead to find out what technical field that total weight belongs.
    Then either search that element in your program and put break point at every where it is used through out or crerate a watch point to trigger when the value at the total weight field gets populated.
    Please analyze this way to get your answer.
    Hope this helps.
    Thanks,
    Sourya Prakash.

  • Total weight of the packed item at the delivery

    There is packing in delivery at our case and I have to have the total packed weight of the material. This means that the total weight of the material and the packing materail of the item. From which table I can have the total gross weight?

    Hi,
    Did you try with VEKP and VEPO?
    Regards

  • Delivery document is still open even already invoiced

    Good day! Could anyone help me on this?
    Here is the scenario:
    A new delivery document was created based in sales order. The delivery undergoes to approval procedure and then approved.
    Upon posting of the delivery doc and after past few days, sales return was requested. So, sales return was processed and successfully posted based in that delivery doc, but later that day another sales return was requested and did same procedure (successful).
    Two sales return was created based in that delivery doc and both SR were 'closed' while the delivery doc is still open, now to close that DR an invoice doc is required. Invoice was made base again in that DR and successfully posted. Expectedly, the DR should close but apparently it doesn't close. Why is that? Or did I miss something that would close that DR?
    Thanks in advance!

    Hi Nagesh,
    Yes your right, all marketing docs undergone with approval procedure are all saved as Draft until it was approved by the approver and then posted by the originator and that is the only time DR or any marketing docs should be called as official/posted transaction.
    Going back to my scenario, what I mentioned was approved and posted meaning the transaction was officially saved and undergone with the normal module flow SO->DR->SR->SI.
    And my concern was focused on why DR is still open even already invoiced.
    Correct me if I'm wrong, DR will still remain 'Open' only if the item total qty was not yet invoiced. For example:
    DR1              QTY            Amount
    Item 1             10              100
    SI
    Item 1              8                80
    Thanks,
    Rhod

  • Prevent creation of a delivery document

    Hi,
    We are making a delivery through project( Trx CNS0)
    A reservation is created for a material in project 1 and project 2  for plant stock and a storage location is specified.
    The material in question is available for 100 pc  in the storage location.
    When we create delivery for project 1 ( 100 pc) , system allows the creation of delivery document.
    It also allows the creation of delivery for project 2 ( 100 pc) , eventhough the total stock is only 100 pc.
    However , after PGI has been done for project 1 , system issues an error message " deficit stock" for project 2 at PGI.
    We have maintained 01-daily requirements in MRP3 view.
    We want to prevent creating a delivery document when there is no sufficient stock and do not want to wait until PGI is done.
    Please suggest how can we achieve this .
    Thanks,
    Manohar

    Thanks for your reply.
    We are making delivery through project ( using Trx CNS0).
    The sales order is for , say, supply of 1 no of building.
    The parts are delivered to site , in knocked down condition or in various assemblies. For this , we  use Trx CNS0 and pick the project stock / plant stock items and then create outbound delivery documents.
    To answer your questions :
    1) Is the requirements check box ticked in your schedule line category (VOV6) -. Not ticked for Category LP.
    2) In availability check control whether include sales requirements check box is ticked (OVZ9).
    There are many entries under 01-daily requirements. How does the system pick for deliveries through project ? is not clear to me. We have not created any new checking rules.
    3) In delivery item category availability check off is not X (0VLP). Relevant for picking is flagged.
    Expecting further replies,
    Thanks,
    Manohar

  • Population of Number of packages field(LIKP-ANZPK) in delivery document

    Hi,
    We have a requirement from our client that the number of packages field needs to be populated in the delivery document automatically.
    Scenario:
    The plant is a warehouse managed plant. The delivery document will be created and the TO will be created automaticaly and confirmed. On confirmation of the transfer order the delivery document should be updated with the number of packages field.
    We have setup the packing instructions using POP1. The number of materials in one carton will be mainatined through POF1(O/P type STOC with condition record for material/PLant/Sloc)
    We need information on any standard SAP program which will calculate the total number of cartons/Packing boxes required for the materials specified in the delivery document and this should be populated in the number of packages field in delivery document.
    Would appreciate help from someone who has worked on such a scenario.
    Thanks,
    Harish

    Hi,
    If you use pick and pack LM45 to pack the items as you pick when the TO is confirmed this field automatically updates with the number of HU used and you get an accurate packing hierarchy.
    James

  • Message box to confirm choice in Delivery document

    Hi Everyone,
    I have a User Defined Field on my documents with three choices, "A", "B" or "C". Based on the type of Delivery, the user selects the appropriate choice.
    However, this User Defined Field needs to be set to default to "A" for all the other documents.
    The behavior I would like to set is to have this User Defined Field set to default to "A" for absolutely all documents, but pops up a message box with the message "Please confirm your choice" with Ok and Cancel buttons. If Ok then carry on else modify choice in Delivery document and pop up the message until Ok is clicked.
    I can do this as an error message from the Transaction Notification, but the error message is totally user UNfriendly.
    Could someone advise on how I can setup this message box from the Transaction Notification? I just need the message box syntax if such a thing exists.
    Thanks!
    Phil

    HI Phil,
    You may try an easy work around:
    Add another UDF (Y/N) next to this UDF that user must be select Y value but default value is N.
    Train user that always check the Default A for the first UDF is acceptable or not.
    A Transaction Notification can be created to block any document that user had not changed the other UDF value.
    Thanks,
    Gordon

  • Same gross weight & net weight in delivery

    Hi Gurus,
    Why net weight and total weight is coming same in delivery?
    In Delivery > Goto > Header > Loading > Total weight & Net weight
    as I see difference in  the gross weight & net weight in MMR.
    What could be the reason?
    Regards,
    Rakesh

    Hi,
    Chcek in VOV7, whether the field "Wght/Vol. Relevant" is flagged or not. It has to be flagged to calculate weight and volume for an item.
    Regards
    Vijay

  • Partial Goods Issue against a Delivery Document

    Dear Xperts,
    I am having a scenario regarding standard Stock Transport Process with Delivery(Material Movement 641).
    My requirement is, when I will create a Stock Transport Order the Delivery document will automatically be created at the same time.This can be achieved thru customization.
    But the problem is , the material quantity in the delivery document will be same as the order quantity in PO.My question is :
    1. Can the user change the quantity in delivery which is automatically got created at the time of PO creation.
    2. If yes, then for the remaining order quantities , shall the system will automatically create another delivery?
    3. If no, can we do partial goods issue against that delivery if total material is not available at sending plant?If yes , how to configure?
    Means , In delivery my material qty is 10, can I do Post Goods Issue of leass than 10 qty & create a proforma invoice against that delivery and do the P.G.I. and Billing again against that delivery?
    Plz advice.
    Regards,
    Soumick

    Hi
    As per your scenario you can do the PGI (post goods issue ) for partial quantity only if u required later for reaming quantity when ever stock is available that time you can do again PGI by using the same delivery no for reaming quantity but for this
    In PO you have unchecked the Delivery  completed indicator with   this when ever complete goods are coming then only PO will
    be close up to that PO will be in open Status
    Regards
    Balaraju

  • Capturing actual consumption weight in delivery VF01n

    Dear All,
    I want to capture actual consumption weight i;e weight consumed in production order, needs to be captured while making delivery document by VF01N, can any expert help me on this with any BADI our user exit.
    Thanks in advance.
    Moderator message: please do your own research before asking.
    Edited by: Thomas Zloch on Jan 10, 2011 2:02 PM

    Data flow to the delivery header/delivery item is controlled by data transfer routines assigned in copy control configuration.  Modify (or copy and create new) the routines assigned in your config.  Disclaimer...I can't say whether this covers a PP scenario appropriately though; I haven't done any PP in 10 years.

  • How can get total weight in shipment

    Hi,
    I want, How can get the total weight quantity in shipment (VT03N)? That is sum of delivery quantity of all line item.
    All ready, I have checked to table VTTP there only showing delivery number in field name VBELN.
    Is it possible please tell me which table through I can get the total weight quantity.
    Regards,
    Devendra

    Hi Prashanth,
    Thanks for reply,
    As suggested you, same think I used the logic and solved the problem.
    VTTP-TKUNM (Shipment Number)
    VTTP-VBELN (Pickup all delivery number)
    LIPS-VBELN (Give all delivery Number)
    LIPS-NTGEW (net weight) or LIPS-BRGEW (gross weight) sum up of all the quantities for the field.
    Regards,
    Devendra

  • Report of cancelled Delivery Document, Billing Document & Shipment Document

    Hi,
    How can I get list of cancelled Delivery Document, Billing Document & Shipment Document.
    Regards,
    VK

    Hi,
    Good Day,
    Cancelled Delivery will available in Table CDPOS
    Pass below parameter
    OBJECTCLAS    LIEFERUNG              
    OBJECTID       Delivery Number
    TABNAME       LIKP                   
    CHNGIND       D                      
    Cancelled Invoice available in Table VBRK Pass Below Parameter
    FKSTO = 'X'
    Shipment Document Once you delete i don't thinks will get the details.
    May we can use Userexist and maintain customized table to track the deleted shipment number.
    Best Regards,
    KSK

Maybe you are looking for