Trace a user setting

Hi,
Is there a way to trace a user settings in the portal EP6 Sp2 Patch 40, I need to know where a settings is stored in the oracle database of the portal. The reason I am asking is, i want to activate the accessibility feature for all user and i just want to activate it for all user at once. Then they can turn it off if they want, but by default it will be on.
Thanks
Jean Seguin

Hi,
Just activate and launch the SQL Trace and try setting this accessibility setting for user from Portal. In your SQL Trace, you will see into which DB Table the settings are saved.
http://help.sap.com/saphelp_nw70/helpdata/en/17/358df9c9fee2469105731e10756921/frameset.htm
Greetings,
Praveen Gudapati
[Points are welcome for helpful answers]

Similar Messages

Unable to capture trace, when user logs in throuigh Web Interface

The Trace shows 'No Records Found', when user logs in through Web Interface of CRM. But there is Trace found, when the same user logs in through logon pad and carries out normal actvities.
sufficient auth. is provided.
Is there any setting in ST01, through which i can get trace , when user logs in through Web Interface
Regards

ST10 traces 1 instance only.
Your CRM web interface could use another instance than your backend. Go to transaction SM21, choose the appropriate server and run ST10 again.
Succes!
Kind regards,
Lodewijk Borsboom

How to trace a USER in oracle?

Hi Sir,
I have a rquirement that I need to Trace a session created through the Application. The only data I have is that I know the application will connect to a Database schema and nothing else. How is it possilbe that I can create a trace file for it.
Also is it possilble, that i can trace complete user. how to find all the trace as it create number of process inturn number of trace, how do I find it and combine. I read the documentation but can't understand it clearly?
Any help will be great.

sanora600 wrote:
Aman, thanks for replying. This is the problem, they have not implemented dbms_application_info.
That is the reason I want to know how to trace user(all session of a schema) and combine all the session generated trace(something like trcsess) and then generate tkprof. I am on Oracle 10g.Well, first off, users connect to databases, they don't connect to schemas. And as a follow on, users have sessions, schemas don't.
That said, you might investigate a logon trigger that initiates a 1046 trace. Something like this:
-- create a logon trigger for capturing extended trace data
-- NOTE: must be run as SYS
-- NOTE: Be sure to change both occurances of the target username
-- ('user = xxx' and 'TRACEFILE_IDENTIFIER=') to the
-- correct value for the session you want to trace.
create or replace trigger logon_trigger
after logon on database
begin
if (user = 'SCOTT' ) then
execute immediate 'ALTER SESSION SET TRACEFILE_IDENTIFIER=''SCOTT_APP''';
execute immediate 'alter session set timed_statistics=true';
execute immediate 'ALTER SESSION SET EVENTS ''10046 TRACE NAME CONTEXT FOREVER, LEVEL 12''';
end if;
exception
when others then
null;
end;
end;
Of course, you can play around with the 'if' condition, and delete or disable the trigger when it is no longer needed. The resulting trace file can be run through tkprof.
Edited by: EdStevens on Dec 19, 2008 9:03 AM

How to trace which user shutdown oracle database in unix OS?

our organization is having 10 DBA with sysdba priviladge. We are using UNIX operating system. At morning say for example if some one (SYSDBA user) shutdown the oracle database how other sysdba user trace the user who shutdown the database? the information i need is terminal from where oracle got shutdown and the username? Please help...

Hello,
You are right Sybrand, SYSDBA connections are always audited.
My answer was about enabling auditing to any connections, which may give informations about who access to the Database in general. And, this is true, it was not the scope of the OP question.
However, so as to enlarge audit of SYS/SYSDBA/SYSOPER operations, setting the parameter audit_sys_operations=TRUE may be interesting:
http://download.oracle.com/docs/cd/E11882_01/network.112/e16543/auditing.htm#DBSEG0611
To the OP:
Where the audit tracefile get genareted for sys user?You may execute this:
show parameter audit_file_destThank again Sybrand for correcting me.
Best regards,
Jean-Valentin

How to trace an user access

Even if I've got no DBA permission (for example I don't see the v$session table), have I got any way to trace the users accessing the DB? How can I do? I was told about trace but can someone tell me more? I'd like to know the user accessing the DB and the operation that he's launching. Is it possible?
Thanks!

Anything is possible if you have the correct privileges. But then you probably don't have those privileges, and probably for a reason, as you probably also don't have the DBA role for a reason.
If you are to enable trace in a different session, you would need execute access on an Oracle provided package, which differs by version, and of course you assume Oracle never changes, and there is only one version out there: yours.
For a DBA it would be the easiest to grant you the select_catalog_role and the execute_catalog_role.
But then again one would ask why you think you should spy on him, and why you don't cooperate with him and/or try to convince him.
Sybrand Bakker
Senior Oracle DBA

Default User setting at Dashboard level

Hi SAP Users,
i want default dashboard user setting & all users will only see my setting
Is it possible to have default user setting for dashboard?
Regards
Ravindra

In the administration mode, you can update the current configuration settings/layout (right-click on the UI group you want to update, can be a dashboard, a field...) and save them as the default (standard) settings.
Please try with the administration url I provided you with, and let me know if it helps.
http://server:port/irj/portal?sap/bc/webdynpro/sap/cprojects?sap-config-mode='X'
Matthias

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

So I just bought a used MacBook from Amazon with OSX 10.5.8. I am trying to install new software and operating system, but I don't have the passwords to the Users set up in the computer. What do I do?

Put your install DVD into the optical drive (CD/DVD drive) and reboot. Be sure to either use the disc that came with your Mac, or, if you installed a later Mac OS X version from disc, use the newer disc. As soon as you hear the boot chime, hold down the "c" key on your keyboard (or the Option Key until the Install Disk shows up) until the apple shows up. That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Reset Password. After resetting the password use Startup Disk from the same menu to choose your hard drive for startup and restart.

Network.http.max-persistent-connections-per-server keeps reverting to user set 4

I didn't used to have this problem as far as I'm aware, but as of recently, I've noticed that if I try to download more than 4 of one thing at a time from the same site, it would fail. For instance, if I have up 5 web pages of streaming content, only 4 will load, the other 5th one will do nothing until I finish one of the others. Upon looking up some information on this, I saw that the network.http.max-persistent-connections-per-server is set at "user set = 4", and if I change that number to anything else, it corresponds. If I click to 'reset' the number, it goes to the default of 6 - which is still less than what it used to be. I used to not even have a limit on this as far as I'm aware, or if I did, it was well beyond 10 and that wasn't a product of me manipulating it.
What I'm asking is this:
1) How do I make this so it permanently switches to a higher number? Every time I reset it to 6 or I manually change the number to something higher, once I close it, those settings go back to 4.
2) Why is it reverting and not staying the way I change it?
3) What's the purpose of this and why is it just recently doing it when I haven't put any new add-ons or made any other refinements to Firefox that I'm aware of?
Any help would be appreciated

Two possible causes for it resetting to 4 that I can think of.
# You have an add-on handing that pref and that is resetting it to 4 when Firefox is restarted.
# That pref is set via user.js and that causes it to go to that value as Firefox starts.
http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes <br />
http://kb.mozillazine.org/User.js_file

How to enable user sets from tools in sales order

Hi,
How to enable user sets from tools in sales order..it is greyed out..
and is there anyway we can do to add shipsets from other place?
Thanks

Hi Ruchi
I hope u had gone to the screen fields which u want them not to be editable. So there u select all the fields contents which u do not want to to be changed and check the boxes with W.content and Display and save it. Once evrything is done u have to activate the particular transcation going in to the standard variants and put the name and click the activate button.
Hope its clear
Reward if help ful
Sri

AE5.2:Automatic ESS User Set up and email notification to the User

Forum,
In AE, stageless ESS user set up creates the ESS user and sends an email to new user like below...
This is to inform you that your request REQUESTNUMBER provisioning has been done. Your account has been created. Please find the information below.
User ID:
Password:
SAPSystem:
Is it possible to change the wording in the email? Has anyone tried it? I am aware that it is a system generated Email, but is it configurable?
Thanks for any insight.
Edited by: Bhanu Reddy on May 22, 2008 1:26 AM

Just an FYI - the free Yahoo accounts do NOT use POP mail...If you want this type of access, you have to pay for the upgraded version of Yahoo Mail...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

How to trace other user's session?

Dear Experts,
I would like to trace other user's session, I am on Oracle 10g R2 (10.2.0.4) on a Windows box. I did search on google and found tons of articles explaining about tracing techniques. But unfortunately, trace file is not getting generated in my case. Below are the steps I am following:
SQL> conn /as sysdba
Connected.
SQL>
SQL> select sid, serial# from v$session where username = 'TEST';
       SID    SERIAL#
        38         17
SQL> show parameter user_d
NAME                                 TYPE        VALUE
user_dump_dest                       string      C:\DB10G\UDUMP
SQL> show parameter timed_s
NAME                                 TYPE        VALUE
timed_statistics                     boolean     TRUE
SQL>Connect a new SQL*Plus session as TEST and then
SQL> show user
USER is "SYS"
SQL>
SQL> select sid, serial# from v$session where username = 'TEST';
       SID    SERIAL#
        19      24465
        38         17
SQL> exec dbms_system.set_ev(38,17, 10046, 12, '');
PL/SQL procedure successfully completed.
SQL> exec dbms_system.set_ev(38,17, 10046, 0, '');
PL/SQL procedure successfully completed.
SQL> grant execute on dbms_system to test;
Grant succeeded.
SQL> exec dbms_system.set_ev(38,17, 10046, 12, '');
PL/SQL procedure successfully completed.in the new session (TEST):
SQL> select * from tab;
TNAME                          TABTYPE CLUSTERID
T                              TABLE
T3                             TABLE
T1                             TABLE
T2                             TABLE
MYEMP                          TABLE
SQL>Yet, no trace file is generated in "C:\db10g\udump" folder.
C:\db10g\udump>dir
Volume in drive C is SYSTEM
Volume Serial Number is AC21-0462
Directory of C:\db10g\udump
12/15/2008 12:36 PM    <DIR>          .
12/15/2008 12:36 PM    <DIR>          ..
               0 File(s)              0 bytes
               2 Dir(s)   9,891,508,224 bytes free
C:\db10g\udump>Your help/advice in this regard will be very helpful.
Regards

You must be using shared server.
You can verify this by referring to the SERVER column of v$session.
In shared server several servers will execute your code, so that's why you don't find a trace file.
The method described in this article should work in your case also:
http://technology.amis.nl/blog/1794/how-to-trace-a-java-application-through-a-connection-pool-using-dbms_monitor-6
Hth
Sybrand Bakker
Senior Oracle DBA

Is there a user setting which may affect fillable forms?

On our home PC running Widows 7 Ultimate and Adobe Reader 11, we have 2 users. One which has admin rights the second is just a user. Accessing a Benefit Form on the Sunlife Website which is fillable the regular user is able to complete it yet the user with Admin rights can only check boxes and is unable to enter any text. Is this a Windows user setting?
Thanks

Hello,
I would suggest you to try clearing the browser cache or try to fill same form using a different browser.
Note:- Account privileges does not affect the ability to fill on-line forms.
Regards,
Nakul

Copy user setting

Hi,
I used this query for copy user setting from Manager to all other users. This query running successfully but problem is this all the setting is copied but manager user lost all settings i.e all udf's come under general category which is previously distributed to different category. Which is fine for rest of the users.
ALTER PROCEDURE [dbo].[CopyUserSettings] AS
Declare @ManagerId int
Declare @MaxId int
Declare @NextId int
Declare @TempId int
-- Change value below if copying from other than Manager(1)
Select @ManagerId = 1
Select @MaxId = max(UserID) + 1 FROM OUSR
Select @TempId = 1
Select @NextId = @ManagerId
if exists (select 1 from sysobjects where name = 'temp_dev_sup')
Begin
drop table temp_dev_sup
End
select * into temp_dev_sup from cprf where usersign=@ManagerId
Delete from cprf where usersign= @ManagerId
WHILE @TempId < @maxid
BEGIN
If @tempid <> @managerid
BEGIN
Update temp_dev_sup Set usersign= @TempID where usersign=@NextId
Insert into cprf Select * from temp_dev_sup where usersign= @TempId
END
Select @NextId = @TempId
Select @TempId = @TempId + 1
If @TempId >= @maxid
BREAK
Else
CONTINUE
END
Thanks
Rahul

Hi Rahul,
Change Select @ManagerId = 1 from 1 to some other user id having correct form settings and execute belwo procedure again.
ALTER PROCEDURE [dbo].[CopyUserSettings] AS
Declare @ManagerId int
Declare @MaxId int
Declare @NextId int
Declare @TempId int
-- Change value below if copying from other than Manager(1)
Select @ManagerId = 1
Select @MaxId = max(UserID) + 1 FROM OUSR
Select @TempId = 1
Select @NextId = @ManagerId
if exists (select 1 from sysobjects where name = 'temp_dev_sup')
Begin
drop table temp_dev_sup
End
select * into temp_dev_sup from cprf where usersign=@ManagerId
--Delete from cprf where usersign= @ManagerId
WHILE @TempId < @maxid
BEGIN
If @tempid <> @managerid
BEGIN
Update temp_dev_sup Set usersign= @TempID where usersign=@NextId
Insert into cprf Select * from temp_dev_sup where usersign= @TempId
END
Select @NextId = @TempId
Select @TempId = @TempId + 1
If @TempId >= @maxid
BREAK
Else
CONTINUE
END
Thanks,
Neetu

LDAP authentication not minding user set

I have a publishing rule for an internal website setup with LDAP authentication setup for two different domains, the domain the TMG 2010 is joined to (domain1) and another external domain (domain2). I want users from either domain to be able to authenticate
and I thought it was working perfectly, but found that anyone from domain2 can authenticate successfully (anyone can authenticate from domain1, but that's okay).
I have a LDAP user set with the AD group from domain2 that I want to allow access, but the TMG doesn't seem to adhere to this and lets any authenticated user from that domain in. I have added both user sets for domain1 and domain2 to the "This
rule applies to requests from the following user set:" under the Users tab in the publishing rule.
Any clues?

Hi,
Based on my experience,
Server Authentication Certificates
should exist on DCs that you want TMG to use for authentication and
TMG must trust issuer of the Server Authentication Certificate. You can check that in
Trusted Root Certification Authorities on TMG.
In addition, when you add LDAP server Set for LDAP user authentication, you need to add the DCs and type the AD domain name. Please note that the domain name
is the domain in which the user accounts are defined, and not the domain to which Forefront TMG is joined.
More information:
Configuring LDAP authentication on AD LDS
Setting Up and Troubleshooting LDAPS
Authentication in Forefront TMG 2010
Best regards,
Susie

How to trace connect user ?

Hi,
How can I trace all user connection in a file ?
I would like to know who connected (user oracle) and when.
Thanks for your help,
gnom92.

You can see the figure how many connection made since the db starts up quering v$sysstat;
select name,value from v$sysstat where name like '%logon%';
NAME VALUE
logons cumulative 132671
logons current 175
Generally, Oracle doesn't keep this information. You have to enable audit to keep this info.

Trace a user setting

Similar Messages

Maybe you are looking for