Trace stops working

for reasons that are not apparent, the trace function will stop working.
I am running in debug mode and I always see the usual sets of output:
[SWF] Volumes:DATA:Flex Projects: .... etc
I have re-installed both the Flash Player and the Debugger ... and yet this problem continues to appear.
The most consistant method I've found for restoring the trace function is to quit Flash Builder, and then the first thing I do after reopening it is to Project/Clean.
I may have to repeat this process a few times, but eventually it works.

no ... than'ts not it.
It will occur even when the previous time I ran the pgm it was in debug mode and tracing stmts, so if anything is cached and replaying, then it would be one that worked.
I have yet to identify anything that causes the trace to stop functioning, but it will suddenly stop and I need to go throught the proceedure describe above to get it working again.
Thanks for the suggestion though, I hadn't considered that before.

Similar Messages

Laserjet pro 400 color MFP m475dw scanner stopped working in windows 8.1. Please help!

updated my laptop to windows 8.1 and the hp scanning software stopped working. It would not find the printer even though i could print from it. I uninstalled the entire software suite, removed all traces of the printer from contol pannel and then proceeded to download the 8.1 64 bit version of the full solution suite. Tried to run it and the program gets to about 80%, says a problem occurred while preparing to install software to your system and tells me to restart computer and try again.
Tried restart, no go. then tried to load just the basic print and scan and same problem. Restarted, tried again and nothing. then i turned off firewall and antivirus. did prior steps and nothing. I can manually install the printer through control pannel but I cant get the HP software to load at all. plum out of ideas and of course HP wants to charge me to troubleshoot a year old printer but cant guarantee it will work. Lovely.... Any help is appreciated.

I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial printer. You can do this at http://h30499.www3.hp.com/hpeb/
I hope this helps.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Dell XPS 15 l502x mini-Display Port stopped working after update.

After the updates on the 11-10-2014 my mini-display port (which worked great previously and is part of the Intel Graphics) stopped working.
Am running Arch 64bit with Slim + E19
The symptoms are:
1. Detects monitor from the laptop and xrandr throws no errors
2. Enlightenment thinks the screen is connected and it appears in the screen setup as on.
3. The monitor no longer recognizes that there is a laptop plugged in and just stays off...
kernel.log
Oct 13 10:10:19 localhost kernel: [drm:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo underrun on pch transcoder B
Oct 13 10:10:19 localhost kernel: [drm:cpt_serr_int_handler] *ERROR* PCH transcoder B FIFO underrun
Oct 13 14:09:35 localhost kernel: [drm] Wrong MCH_SSKPD value: 0x16040307
Oct 13 14:09:35 localhost kernel: [drm] This can cause pipe underruns and display issues.
Oct 13 14:09:35 localhost kernel: [drm] Please upgrade your BIOS to fix this. (Will look for an update...)
lspci | grep Intel | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
Here are the packages that I think I may have to swap around...
[2014-10-11 19:16] [PACMAN] removed ati-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed svga-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-intel-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] removed lib32-nouveau-dri (10.2.8-1)
[2014-10-11 19:16] [PACMAN] upgraded apache-ant (1.9.4-2 -> 1.9.4-3)
[2014-10-11 19:16] [PACMAN] upgraded libdrm (2.4.56-1 -> 2.4.58-1)
[2014-10-11 19:16] [PACMAN] installed mesa-dri (10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded wayland (1.5.0-1 -> 1.6.0-1)
[2014-10-11 19:16] [PACMAN] upgraded mesa (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded mesa-libgl (10.2.8-1 -> 10.3.0-3)
[2014-10-11 19:16] [PACMAN] upgraded libva (1.3.1-2 -> 1.4.0-1)
[2014-10-11 19:20] [PACMAN] upgraded linux-lts (3.14.19-1 -> 3.14.20-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-ati (1:7.4.0-3 -> 1:7.5.0-1)
[2014-10-11 19:27] [PACMAN] upgraded xf86-video-intel (2.99.916-2 -> 2.99.916-3)
As far as I can see my options are to try and roll back via pacman -U in my /var/cache... or to figure out how to make my Nvidia HDMI output work using Synergy...
I suspect this is some type of driver regression (kernel/mesa/xorg) but am not sure as I have not seen much information about this issue online.
Unless someone has a better idea... when I get time to try to resolve the issue I will update this post.
Ok I missed this from dmesg:
[11671.333426] WARNING: CPU: 0 PID: 486 at drivers/gpu/drm/i915/intel_dp.c:137 intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]()
[11671.333428] invalid max DP link bw val 0, using 1.62Gbps
[11671.333430] Modules linked in: ctr ccm bnep ipt_REJECT xt_conntrack iptable_filter xt_CHECKSUM xt_tcpudp iptable_mangle ipt_MASQUERADE iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ip_tables x_tables uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core fuse v4l2_common ecb videodev media btusb bluetooth 6lowpan_iphc coretemp hwmon intel_rapl x86_pkg_temp_thermal intel_powerclamp joydev mousedev snd_hda_codec_hdmi kvm_intel arc4 snd_hda_codec_realtek snd_hda_codec_generic kvm iwldvm snd_hda_intel snd_hda_controller crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel cryptd snd_hda_codec r8169 iwlwifi snd_hwdep dell_wmi snd_pcm sparse_keymap iTCO_wdt snd_timer snd mii iTCO_vendor_support dell_laptop microcode pcspkr dcdbas dell_smo8800 psmouse serio_raw
[11671.333467] thermal soundcore i2c_i801 shpchp evdev mac_hid mei_me mei lpc_ich wmi processor ac battery pci_stub vboxpci(O) vboxnetflt(O) vboxnetadp(O) vboxdrv(O) udlfb syscopyarea sysfillrect sysimgblt fb_sys_fops tun nfs lockd sunrpc fscache vhba(O) bridge stp llc brcmsmac cordic brcmutil led_class bcma mac80211 cfg80211 rfkill bbswitch(O) ext4 crc16 mbcache jbd2 sd_mod sr_mod crc_t10dif cdrom crct10dif_common atkbd libps2 ahci libahci ehci_pci libata xhci_hcd ehci_hcd scsi_mod usbcore usb_common i8042 serio i915 button intel_gtt i2c_algo_bit video drm_kms_helper drm i2c_core
[11671.333506] CPU: 0 PID: 486 Comm: Xorg.bin Tainted: G W O 3.16.4-1-ARCH #1
[11671.333509] Hardware name: Dell Inc. Dell System XPS L502X/0YR8NN, BIOS A04 03/25/2011
[11671.333511] 0000000000000000 00000000c0982604 ffff8800b2b4fa80 ffffffff8152ba1c
[11671.333515] ffff8800b2b4fac8 ffff8800b2b4fab8 ffffffff8106e45d ffff880037c92000
[11671.333518] 0000000000000000 0000000000000004 ffff88014e2d8c00 ffff8801b5a2f800
[11671.333521] Call Trace:
[11671.333528] [<ffffffff8152ba1c>] dump_stack+0x4d/0x6f
[11671.333534] [<ffffffff8106e45d>] warn_slowpath_common+0x7d/0xa0
[11671.333537] [<ffffffff8106e4dc>] warn_slowpath_fmt+0x5c/0x80
[11671.333553] [<ffffffffa00f543e>] intel_dp_max_link_bw.isra.9+0x3e/0xa0 [i915]
[11671.333566] [<ffffffffa00f5539>] intel_dp_compute_config+0x99/0x660 [i915]
[11671.333579] [<ffffffffa00da214>] __intel_set_mode+0xb14/0x1670 [i915]
[11671.333608] [<ffffffffa00dd4e6>] intel_set_mode+0x16/0x30 [i915]
[11671.333638] [<ffffffffa00de623>] intel_crtc_set_config+0xa83/0xdd0 [i915]
[11671.333666] [<ffffffffa0025fa1>] drm_mode_set_config_internal+0x61/0xe0 [drm]
[11671.333690] [<ffffffffa002984b>] drm_mode_setcrtc+0x2ab/0x5b0 [drm]
[11671.333712] [<ffffffffa0019b9f>] drm_ioctl+0x1df/0x680 [drm]
[11671.333728] [<ffffffff811d4db0>] do_vfs_ioctl+0x2d0/0x4b0
[11671.333737] [<ffffffff811df4ee>] ? __fget+0x6e/0xb0
[11671.333745] [<ffffffff811d5011>] SyS_ioctl+0x81/0xa0
[11671.333753] [<ffffffff815317a9>] system_call_fastpath+0x16/0x1b
[11671.333758] ---[ end trace 64be8044e26ca3c5 ]---
Last edited by scmurcott (2014-10-13 19:12:07)

So I downgraded those packages and the kernel with no luck.
I tried to get the HDMI working via Synergy... and failed
I then tested the Display Port on Windows and it did not work there either - exhibiting the same symptoms as Linux - the OS sees the monitor but no data was transferred.
So I ended up using one of my Display Link monitors at work... the USB monitors were ok, just an irritation with a flickering mouse.
I hope it is the miniDP>HDMI adapter and not the port... very frustrated by this problem.
I hope to test another adapter soon.
I think as nobody else is experiencing this issue that it may well be hardware/firmware related.
Hope there is a happy end to this post but not feeling so positive right now.

BBM & Email stop working every morning....

Every morning my BBM, Whatsapp, Email and Facebook notifications stop working....
BBM has a red clock when sending and doesn't receive and the others don't receive or send anything...
The only fix has been pulling the battery or doing a soft reset with ctrl+alt+delete.
I have tried reinstalling the apps, reinstalling the OS (don't know how to format and reinstall tho)
Can anyone give me some solutions? Does it sound like a hardware problem?
My phone is a brand new out the box Blackberry Curve 8520, its got an etisalat sim card as I live in Dubai if that matters.

Cat and Maximo,
> Let me try to get that straight. Your BM does static NAT for your
> mailserver (and other boxes), and suddenly UDP and ICMP from these
> natted servers through the BM still works, but TCP doesn't?
Yes. That's what it looks like.
> Can you still do TCP *to* the BM from the natted devices when that
> happens? As you say your proxy continues to work, it sounds as if TCP in
> general on the server continues to work, but does it also work from the
> mailserver?
Everyone browsing via BM proxy continues with no interuption.
The mail server can telnet to any other server on the internal LAN but
nothing past BM. DNS continues working for the mail server too.
> If really nothing changed, this might be a (succesful) DOS attack of
> some sort. I wonder if a LAN trace could reveal anything of interest.
Do you mean port scan the BM server?
I know that "nothing has changed" is a loaded statement. The only thing
(that I know of) that has changed relatively recently is the addition of
the Squid server. It has been running behind the BM server for about 3
weeks. Recently I added a filter exception allowing the Squid server to
access higher ports (dyn/tcp).
But, as I noted before, I think removing ipflt should eliminate any
doubts there. Is there some way Squid could be corrupting something there?
The problem was compounded this morning (saturday). I came in today so I
would have the network essentially to myself. But, to my surprise,
everything was ok.
Cat, You're right. This server is no spring chicken. It is an IBM
Netfinity 3000. Its probably 3 or 4 years old (maybe more). I will think
about this as a hardware problem but I just wish the thing would die
altogether and get it over with. :o)
Thanks,
Brian

Office 2013: Microsoft setup bootstrapper has stopped working

I cannot install Office Professional Plus 2013 on Win 7 64-Bit. Neither x86 nor x64 Office 2013 can be installed sucessfully.
I've tried to uninstall the previous versions of Office 2007, via using the Microsoft Fixit tool
MicrosoftFixit50154 in
http://support.microsoft.com/kb/971179, but after that, it still failed to install Office 2013.
I've tried to remove all traces of the new Office installed on the system via
O15CTRRemove in http://support.microsoft.com/kb/2739501, but this fix cannot work with error code
0x80300113.
Can anyone help me? Thanks!

Microsoft Office has stopped working.
Microsoft Word has stopped working.
Microsoft Outlook has stopped working.
Microsoft Excel has stopped working.
Microsoft PowerPoint has stopped working.
Microsoft Publisher has stopped working.
Microsoft Visio has stopped working.
If You have any Problem Please Visit . this is very usefulll artical
http://www.broovo.com/how-to-fix-microsoft-office-2013-bootstrapper-error/

Windows 7 - browser stops working still connected

As the title says Windows 7, browser stops working after some time passes.
This effects IE and Chrome. I can still ping www.google.com or it's IP address. (all other computers on the network are fine)
I've used both the wired and wireless connection without the same results.
I reboot and it works, I walk away from the work station and then boom no browsing.
I've turned off the firewall, released and renewed the IP, netsh winsock reset none off this worked.
I've gone into internet options and ensure that no "proxy' boxes are checked.
I've uninstalled the network card drives and restarted the machine.
I've ran Malwarebytes (no infections), ccleaner to check for registry problems. Nothing there.
I've disabled the power saving options and uncheck "let windows turn this device off"
I've also ran Norton and Mcgafee uninstallers just be sure there aren't any residue from those installed.
No bittorrent clients
So I'm online but can't browse on this one computer? what's the deal please Help!

ctrl+alt+del to display the tasksmanager...Processes tab,
any google processes running? googletoolbarupdater.exe (x86 or x64)?
any other suspicious/unknown processes running? see why not to use ccleaner on win7 machines http://forums.steampowered.com/forums/archive/index.php/t-971768.html spybot S&D installed? turn off 'Teatimer' Tools>Internet Options>Security tab, click "Reset all
zones to default".... there are security zone settings for meta refresh. running IE in noAddons mode is the first test (close all open IE windows first, if using IE8 reboot your computer to clear any hidden IE crash recovery processes or use the taskmanager
to kill any orphaned IE processes) Start>Control Panel>Sharing and Networking>run the diagnose connection problems tool to diagnose network connection issues. IE9....f12 to display the developer tool>Networking tab, click "Start Capturing"..... to trace network
requests and responses. IE8 and earlier.... download fiddler from http://fiddlertool.com HTH
Rob^_^
also Tools>ActiveX filtering (enable/disable) google.com injects an ActiveX 'object' (googletoolbar.dll) that tracks your search and surfing history, in their search and results pages.

Itunes stops working for windows 7 64bit

Hello,
As the title says, I am using Windows 7 Professional x64 on my home computer. I am trying to run itunes but it always says "iTunes has stopped working". if necessary, i will upload a screenshot of it but that's all the information I get.
it occurs when:
exporting music to my ipod classic
adding music in the "automatically add to itunes" folder
adding music by drag and drop
every 30 seconds (without doing anything) - this number is an approximate, it may be less
I have tried the following things:
uninstalling and reinstalling
uninstalling and emptying my music folder, then reinstalling
clean uninstall (using a tool such as iobit uninstaller with Advanced System Care), then reinstalling
tried downloading again, in case the download corrupted the first time
looking up some registry stuff
my sound drivers work, so do other players like VLC and codecs like media player classic's codecs. i can confirm that itunes was one of the first programs to be installed on my computer so the codecs do not effect it. i am also running a server on here through my WLAN to my PS3 and all the music is playing on there. Consequently, I do not think there should be anything wrong with the codecs/drivers themselves.
i can't think of anything else to do, i am resorting to using my little netbook; which i'm trying to get rid of and import all my songs from, hence this being quite a predicament to be in.
This is a brand new computer and a brand new install, built it myself, so there shouldn't be any issues with the OS and i do not think it's wise if i reinstalled because i've already filled up about 2.5TB of stuff. It's going to take too much effort to transfer everything.
As a result, my biggest question is whether it can be fixed. if not, i will just wait till the end of the year when i purchase a macbook air. Of course, i do not want this outcome but if i have to then i'll settle with it.
As with all forum posts i send, my appreciation will go out to anyone who can help in this matter.
kind regards
ehab563UTD

Guess you have to do Uninstall and Re-install of iTunes from scratch.
Try the following steps:
1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
http://support.microsoft.com/mats/Program_Install_and_Uninstall
Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
2. You should remove all instances of iTunes and the rest of the components listed below:
it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
Use the Control Panel to uninstall iTunes and related software components in the following order:
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

SOLVED: W510 Wired Network Stops working

I had a problem with a W510 I ordered with Windows 7 32 bit. At random times, the exclamation point icon would appear over the network icon in the system tray, and the network adapter would no longer be recognized. I could use the built in Windows facilities to reset the adapter, but it would quickly fail again. The only cure was to restart the machine, which was annoying. Wireless networking was not affected - just the wired Ethernet connection.
I downloaded the latest drivers from the Lenovo site and that did not fix it. I have had numerous Thinkpads over the past 12 years and have NEVER had any sort of hardware fault before, so I doubted that it was a hardware fault. Therefore I wiped the machine clean and installed 64 Bit Windows 7 instead.
The first problem I had after installing Win7 x64 was that the internal USB controller was not recognized by Windows. Therefore, USB devices (i.e. my thumb drive with all the x64 Lenovo drivers on) were no longer recognized. Therefore, I burned the x64 drivers to a CD and used that instead.
All the devices including the USB controller then came to life, and it looks like the problem has been completely solved.
I post this, in case anybody else has such a problem.

I just started seeing this issue with my pen silo. The Wacom tablet component has completely stopped working, and I'm seeing "USB device not recognized" every time I insert and draw out the pen. My guess is that all the peripheral components in the tablet are connected to the motherboard via crappy silver trace ribbon cables, and they're susceptible to the tiniest amount of flex, heat, and disruption.
Since the USB device is, at least in my case, still operating well enough to report that it is having trouble, I'm guessing that the issue is transient, but that doesn't fix my problem - and probably won't fix yours. I'd recommend getting a refund.
Here's how to see if the device is reporting a problem:
1) Wait until you see the "USB device not recognized" message again.
2) CTRL+X -> Device Manager
3) Other Devices -> double-click "Unknown device"
4) Go to "Details" tab
5) Select "DevNode status" from the drop-down; the Value pane will have DN_HAS_PROBLEM on one of the lines.
6) Select "Problem code" from the drop-down; the Value pane will likely show "0000002B", or Microsoft USB problem code 43 in decimal.

My airprint has stopped working. It has work well for several weeks and stopped for no apparent reason.

I have performed all the abvious checks and cannot find anything wrong or anything that has been changed. I have consulted several forums and have not found anyone having the same problem. I have an iPhone4 and an iPad2. Air print has stopped working for both devices. I'm guessing it must be something with the printer, which does work very well with everything but airprint. The printer in a HP Officejet 6500A Plus.

After some research, I figured out a work around to sovle that problem. On the router, I created a entry for port fowarding, the trggering port and targeting port with 5353. That seems fixed the problem with lost 6500A plus communication with MAC issue. The problem seems related with Banjour service which is utilizing UDP 5353. I did a trace on the router and found most of MAC products, such as MacBook will trigger the 5353 when connected with router, but some how, the 6500A will only trggering 5353 on router initializing, then lost its communication through 5353 aftrer few mins. Don't know why, but the work around seems working fine.
Hope that give everyone still battling this issue some ideas.

Unable to launch After Effects CS6[Try] after installing (Stopped Working)

Hi
So after installing. I tried to launch AE, then during initialization or loading, it will prompt a message "Has stopped working".
I was able to install AE CS6 and launch it properly on my laptop but I am having difficulties launching it on my desktop.
Desktop Specs
Laptop Specs
CPU: i5-3570k
GPU:
ASUS Radeon HD 7850
Intel HD 4000
note: Using Lucid Virtu.
Motherboard: Asrock Pro 3 z77
Ram: G.Skill Ripjaw X 8gb dual kit 1600mhz ddr3
Storage:
SSD: OCZ Vertex 4 128gb [OS]
HDD: 1tb Seagate Barracuda 7200rpm
OS: Windows 8 Pro 64-bit with media center
CPU:Intel® Core™2 Solo processor SU3300/SU3500 (3 MB L2 cache, 1.20/1.40 GHz, 800 MHz FSB, 5.50 W), supporting Intel® 64 architecture
GPU:
Mobile Intel® GS45 Express Chipset with integrated 3D graphics, featuring Intel® Graphics Media Accelerator 4500MHD (Intel® GMA 4500MHD) with up to 1759 MB of Intel® Dynamic Video Memory Technology 5.0 (64 MB of dedicated video memory, up to 1695 MB of shared system memory), supporting Microsoft® DirectX® 10
RAM: 3gb of ddr3 1033mhz two module
Storage: 250gb WD Blue 5200 rpm HDD
OS: Windows 7 Ultimate 64-bit
Event Viewer LOG
Event 1
Event 2
Event 3
Event 4
Faulting application name: AfterFX.exe, version: 11.0.0.378, time stamp: 0x4f6d63ab
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x00000000011cb03d
Faulting process ID: 0x478
Faulting application start time: 0x01ce2baea1dc2c6a
Faulting application path: C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\AfterFX.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: ee78c1ad-97a1-11e2-bf55-bc5ff44842d6
Faulting package full name:
Faulting application name: Adobe QT32 Server.exe, version: 6.0.0.0, time stamp: 0x4f6d5e4e
Faulting module name: QuickTime.qts_unloaded, version: 0.0.0.0, time stamp: 0x50890e53
Exception code: 0xc0000005
Fault offset: 0x6ee2cce9
Faulting process ID: 0x103c
Faulting application start time: 0x01ce2baea914aa1d
Faulting application path: C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\32\Adobe QT32 Server.exe
Faulting module path: QuickTime.qts
Report ID: e7563660-97a1-11e2-bf55-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: Adobe QT32 Server.exe, version: 6.0.0.0, time stamp: 0x4f6d5e4e
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process ID: 0x103c
Faulting application start time: 0x01ce2baea914aa1d
Faulting application path: C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\32\Adobe QT32 Server.exe
Faulting module path: unknown
Report ID: e7428280-97a1-11e2-bf55-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: Adobe QT32 Server.exe, version: 6.0.0.0, time stamp: 0x4f6d5e4e
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process ID: 0x103c
Faulting application start time: 0x01ce2baea914aa1d
Faulting application path: C:\Program Files\Adobe\Adobe After Effects CS6\Support Files\32\Adobe QT32 Server.exe
Faulting module path: unknown
Report ID: e708bde9-97a1-11e2-bf55-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Here are some workaround/fix I tried to do:
Uninstal and re-install.
Uninstall, clear avery adobe product, remove paths and traces, relaunch, and then re-install.
Same as step 2, with firewall turned off, Anti-virus removed.
Run installation with Administrator rights.
Launch program via Compatibility settines Vista, Vista SP1, Vista SP2, Windows 7
All drivers are updated and reupdated.
Re-installed all GPU drivers.
Refreshed my Wndows 8 OS.
Reformated my Windows 8 OS then Installed AE cs6.
Installed AE on my F drive instead of C [C drive is an SSD and F Drive is an HDD]
I am able to see the AE CS6 splash screen but it will prompt a message "Has Stopped Working".
Other things to take note:
I am able to launch Renderer Machine without any issues.
I am also able to launch other Adobe Products that came along with AE CS6 try version.
Latest Quicktime version is installed.

Hi Todd,
Thanks you for replying.
After updating to 11.0.2, I am still unable to launch AE CS6.
Event LOG
Faulting application name: MsiExec.exe, version: 5.0.9200.16384, time stamp: 0x5010a60b
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x00000000
Faulting process ID: 0xe44
Faulting application start time: 0x01ce2bbe73884a20
Faulting application path: C:\Windows\syswow64\MsiExec.exe
Faulting module path: unknown
Report ID: b15899ff-97b1-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: GPUSniffer.exe, version: 0.0.0.0, time stamp: 0x5059906c
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x000000000004f657
Faulting process ID: 0x164
Faulting application start time: 0x01ce2bc0b512cd76
Faulting application path: F:\Program Files\Adobe\Adobe After Effects CS6\Support Files\GPUSniffer.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: f2ea4476-97b3-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: AfterFX.exe, version: 11.0.2.12, time stamp: 0x505998cf
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x000000000004f657
Faulting process ID: 0xcac
Faulting application start time: 0x01ce2bc0b48fa9b8
Faulting application path: F:\Program Files\Adobe\Adobe After Effects CS6\Support Files\AfterFX.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: 02e64db6-97b4-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: GPUSniffer.exe, version: 0.0.0.0, time stamp: 0x5059906c
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x000000000004f657
Faulting process ID: 0x8dc
Faulting application start time: 0x01ce2bc0c885d1ca
Faulting application path: F:\Program Files\Adobe\Adobe After Effects CS6\Support Files\GPUSniffer.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: 063e499a-97b4-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
Faulting application name: AfterFX.exe, version: 11.0.2.12, time stamp: 0x505998cf
Faulting module name: atio6axx.dll, version: 6.14.10.12172, time stamp: 0x51423773
Exception code: 0xc0000005
Fault offset: 0x000000000004f657
Faulting process ID: 0xd70
Faulting application start time: 0x01ce2bc0c86b9768
Faulting application path: F:\Program Files\Adobe\Adobe After Effects CS6\Support Files\AfterFX.exe
Faulting module path: C:\WINDOWS\SYSTEM32\atio6axx.dll
Report ID: 18b30dc0-97b4-11e2-bf56-bc5ff44842d6
Faulting package full name:
Faulting package-relative application ID:
And here are the error messages that I am getting everytime I try to launch AE.
After Effects error: After Effects crashed previusly attempting to initialize OpenGL. Cosult the manufacturer of your graphics card for a compatiple OpenGL driver.
After Effects error: Crash in progress. Last logged message was:<2640><GPUManager><2> Sniffer Result Code: 1

Adobe Reader 11 stopped working and now will not install

For some reason my Adobe Reader 11 stopped working today when I tried to use it so I figured I would try to re-install it. Well, re-installing it helped none. The same error keeps re-occuring. Here is a screenshot of the error message I keep getting:
http://i45.tinypic.com/16ovpy.png
Any solutions?
Thanks!

You can try using this tool to remove all traces of Reader:
http://labs.adobe.com/downloads/acrobatcleaner.html
Then, you may download the offline Reader installer from
http://get.adobe.com/reader/enterprise/
After downloading, restart your computer and run the installer before doing anything else.

Windows 7 64-bit: Safari has stopped working

Help needed! I am one of those guys that has to use a Windows machine at Work. So I have a Windows 7 64-bit OS on my work laptop. I use Safari at home on my Macs. Since I have a browser choice, I surely want to use Safari 5 on my Windows 7 machine but so far I am having no luck. Safari runs for X minute (time varies) and then all of sudden crashes with a message "Safari has stopped working." I have uninstalled Safari, manually cleaned up all the Safari folders that go into user account preferences, ran a registry cleaner via WinUtilities so that all traces of Safari are gone. Then did a fresh install with Administrator privileges (I even tried the install with my own login ID) but either way the result is the same -- Safari 5 crashes at random. What can I do to make Safari 5 on Windows 7 stable? Please advice.
Thank you!
TS

Since I have a browser choice, I surely want to use Safari 5 on my Windows 7 machine but so far I am having no luck. Safari runs for X minute (time varies) and then all of sudden crashes with a message "Safari has stopped working."
Fingers crossed, the problem reports for those errors might cast some fresh light on the source of the problem.
Head into your Problem Reports and Solutions control panel (or the Windows 7 equivalent ... the Action Center?) and look for recent Safari problem reports. Open them up and look through. Do they all seem to be saying the same thing? If so, paste the contents of a typical problem report into a reply here so we can have a look.

Itunes "has stopped working" windows solution? HELP ME

this has beeng going on for about a week, one day i went to itunes and all of all sudden said itunes has stopped working. I have uninstalled itunes and quicktime, and reinstalled. I also searched the forums and did everything what everyone suggests. I located all the files removed them, did a virus check, spyware, adware. Installed itunes and then quick time separtely but still nothing. I just dont know what else to do. Do i have to whipe my whole hard drive and start from scratch. I dont care about my songs because they arent from itunes but just imported cds i just feel like somewhere there is a corrupt itunes file or what not. please someone help me, i dont like having my ipod work with windows media player?
HELP HELP

Ok, the person above had the right idea:
Basically you need to remove ALL traces of iTunes and quicktime before reinstalling. Since you have Vista, its a little bit of a pain in the butt.
1) Go to your control panel and open "Program and Files" or whatever it is
2) Uninstall iTunes but do not reboot the computer yet.
3) Uninstall Quicktime, and any other apple products (Software Update and Media Devices)
4) Reboot.
5) Open "My Computer" and then your main drive (typically C:), scroll down to "Program Files." Verify iTunes and Quicktime folders do not exist. If they still exist, delete them.
6) Go back to C: and highlight the "Windows" folder
7) Go to the folder "System 32", and delete the Quicktime information in there.
8) Next, go to "Windows/User" and highlight each individual user's AppDate folder. Delete any "Apple" folders (it should only be Quicktime and iTunes information).
9) Finally, go to your user "Music" and move all your music to another location. Delete the iTunes cache files, including artwork. Reboot. You do not "have" to reboot, but why not.
10) Reinstall iTunes and Quicktime.
Please note: If you have just installed Ace Mega Codecs, that may be causing a conflict. It may just be a coincidence that I installed this (twice) and iTunes went down (twice), but who knows.
I hope that fixed your problems!

Hot Keys to switch tabs intermittently stop working (Apple-Option-[)

I've been used to using Apple/Command + Shift + [ to go to next and previous tabs for ages. I used to use Apple + Shift + Arrow keys, but when Safari made the brackets the new default, I figured I'd update.
I seem to keep having an issue multiple times a day where Safari stops responding to the Apple + Shift + Bracket shortcuts. When this happens, Ctrl + Tab still works, and I just discovered that Apple + Shift + Left/Right Arrows also still work.
I can't seem to trace the moment where they stop working, or when they return. Restarting the browser doesn't seem to help. Nor does sleeping and re-awaking, although a restart does. However, even without a restart, they do eventually come back.
I detest input managers and unsupported plugins, so neither are installed. I have NO keyboard shortcuts configured in SysPrefs. I have no idea what could be the cause. Is anyone else experiencing this?

The Mac inherently keeps all input methods active, such that you could type alternate keys on alternate keyboards.
If you have third party add-ons that might change the way Bluetooth works, those would be the primary suspects.
Be sure all your Drivers are completely up-to-date, and batteries in battery-powered devices are still strong.
Bluetooth uses the same part of the frequency spectrum (but a different modulation technique) as cheap WiFi Routers, baby monitors, and microwave ovens. if you live in a busy apartment building, there may be very high levels of interference.

ITunes has stopped working (iTunes store only) Help!

Not sure what happened, but just week, I keep getting the message 'iTunes has stopped working.'
I just downloaded and installed iTunes 10.5.
It seems to only be a problem when I try to access the iTunes Store.
I checked from problems, and found this message:
Keep in mind I have NO idea what any of this means. I'm not the most computer savvy person around.
Can someone help in simple terms?
Problem signature
Problem Event Name:          APPCRASH
Application Name:          AppleMobileDeviceService.exe
Application Version:          2.50.39.0
Application Timestamp:          4a5d2d41
Fault Module Name:          AppleMobileDeviceService.exe
Fault Module Version:          2.50.39.0
Fault Module Timestamp:          4a5d2d41
Exception Code:          c0000005
Exception Offset:          0000e98f
OS Version:          6.0.6002.2.2.0.768.3
Locale ID:          1033
Additional Information 1:          e5a3
Additional Information 2:          26f8b4ad5e847652d8a5e03abc22db9d
Additional Information 3:          cc8a
Additional Information 4:          48ab9676060c5b7d1a8b2efa207c5b2b
Extra information about the problem
Bucket ID:          1388964408

I have the same problem. I have tried to re-install Quicktime but it won't allow me. When I go to the Control Panel to the Programs to delete it, it shows the icon but it won't uninstall it as it says that it isn't there saying that the resource isn't available. When I download Quicktime from scratch and try to install it again, it says that it can't install as there is a newer version installed (it says 7.3.3 as the one installed and its also the one I'm trying to install). I've followed previous articles in trying to delete every trace of quicktime and itunes (to include the temp files and common files) and still it says that its gone but won't reinstall saying that there's a newer version already installed and it can't proceed. I've totally deleted all traces of all Apple items (per an apple article) and reinstalled everything but the Quicktime is still being a pain and not working. Any help given would be greatly appreciated.

Trace stops working

Similar Messages

Maybe you are looking for