Track INBOUND (BBP_EXTREQ_INB)- T-Code BBPTRACE

Hi,
we are using SRM 5.5 wit he extended classic scenario.
We are facing some problems while transferring external requirements to the SRM System.
I would like to trace the inbound queue within the srm system.
I found out, that FM BBP_EXTREQ_INB is called to create the shopping carts out of the external requiremets.
Is there any possibility to track the transferred data?
I found transaction BBPTRACE but unfortunately no test data or any other tracking data is created while transferring external requirements to SRM.
Any hints how to find out which data is used via FM bbp_extreq_inb in the srm system?
Thanks and regards
Andreas

Hi Muthu,
I know the SLG1 transaction.
I get a hard dump within SRM and I want to process the inbound interface.
Simple question:
Is there any chane to track/debug the incoming data in SRM?
I can`t use a external breakpoint because RFC interface is used without a dialog user....
I found out transaction BBPTRACE, any input available concerning this transaction?
If you have a look on FM bbp_extreq_inb you can see that there is a FM calling the BBPTRACE so you can write test data, question is how?
Regards
Andreas

Similar Messages

How to track changes of VBA Code in AO?

Hi Community,
is it possible to track changes of VBA code in Excel or AO. Is there any future for that?
Does anybody have experience with that?
Thanks
Andreas

Hi,
there exist also no possiblity to get some Infos from the "Microsoft
Office Alerts?
Thanks Andreas

Handling with T-Code BBPTRACE

Hi All
I found out t-code BBPTRACE, any input available concerning this transaction?
After calling the BBPTRACE so you can write test data, question is how? Where can I find the result or the output?
Regards
MM

Hi,
Which system have you tried thi tcode. I could not find the same in an SRM system
Regards
Sam

How to track the standard function code eg. PRI

Dear All,
I have a requirement that says that I will execute a report. Now when the user will click on the print button may be customized or can be taken from menu (Standard PRI) I want to update a table when the printout has been taken. I am not able to track down the print functionality through AT USER-COMMAND. Can anyone please help me out.
Thanks and regards,
Atanu

open the standard program in se80
check the standard menu items in GUI status.
check the function code there..
regards.
santhosh reddy

IDod Type,Message Type,Inbound Function,Process Code Required

Dear All,
I require
1. IDoc Type
2. Message Type
3. Inbound Function
4. Process Code
for
a. Vendor Master Creation,Updation,Deletion
b. Customer Master Creation,Updation,Deletion
c. Vendor Invoice(TCode-FB60) Creation,Updation,Creation
d. Vendor Credit Memo(Tcode-FB65) Creation,Updation,Creation
e. Customer Invoice(TCode-FB70) Creation,Updation,Creation
f. Customer Credit Memo(TCode-FB75) Creation,Updation,Creation
i require to insert all the above detail into SAP from another system so please provide me the full detail.if the IDoc type is separate for Creation Updation Deletion then provide likewise.
Everybody will rewarded.
Thanks,
RP

hi
use t code wedi and goto EDI administration menu. in that goto development menu. there you can find all items like Idoc type, message type or process code all information is available. You can also use t code WE30,WE31,WE80,WE81, WE42 - Inbound process code and WE41 Outbound process code.
Hope this helps. Assign points if useful.
Rago

Inbound Idoc - Process code

Hey Guys,
I've done one Z* inbound Idoc, but for some reason I am not able to see my process code in the WE20(partner configuration) when I'm trying to set it up. My process code is not appear in the Matchcode(F4). See below the steps I've followed:
WE31
WE30
WE81
WE82
BD51
WE57
WE42
WE20 -> The Process ok is not reachable.. in the inbound area.
Any idea?
Best regards,
Alex

Looks to be good, Hence request you to delete the process code and then reassign the same.
Hope that should work.
Regards
Shiva

Problem in ALE inbound With process code

i want to give a function module to the in bound process code in transaction WE42 but i am not able to give the function module name .after giving the function module name if i say save system giving message "The ALE table is not yet maintained for process code ZTEST".

Hi,
This are the steps which involoves the Idoc processing .
For ur query, check the bold letters .. do that part . it will solve ur problem
Create Idoc type Transaction WE30.
Idoc type Idoc segments
Z_idoc
Create Message Type Transaction WE81.
Message type
z_msg
Assign Message Type to Idoc type Transaction WE82.
Idoc type Message type
z_idoc z_msg
Create a function module through SE37
z_idoc_input
Assign characteristic of function module BD51
Assign fn module to Idoc type and Message Type WE57
Idoc type Message type Fn Module
z_idoc z_msg z_idoc_input
Create Inbound process code and assign inbound function module Transaction WE42.
Process code Inbound function module
zcode z_idoc_input
Create a distribution Model - Transaction BD64
Create distribution model for distribution of messages
with the message type of z_msg
Update inbound parameters of the Partner profile Transaction WE20
For the Logical system A for the above message type update the partner profile
inbound parameter and specify the process code of zcode.
For Outbound ALE Configurations: (Example)
IDoc definitions and necessary ALE configurations settings for the outbound .
Create Idoc segments Transaction WE31.
Create Idoc type Transaction WE30.
Create Message Type Transaction WE81.
Assign Message Type to Idoc type Transaction WE82.
Create a distribution Model - Transaction BD64.
Reward points if it is Useful.
Thanks,
Manjunath MS

Using MBGMCR03 Inbound for reason code

I'm in the Functional Speccing stage of a project. the process I need to document is this: Requirement to post goods movements interfaced into SAP from an external system. I have scoured the forums throughout the web and found only 1 thing similar (on this site) - solution is to use WMMBXY/WMMBID02.
The problem with this is that there is no specific field for reason code (which I need to use) in WMMBID02 as there is in MBGMCR03.
How can I use MBGMCR03 inbound when it has no associated inbound process code bearing in mind that the SAP system is to have no custom developments/modifications? If I have to do some mods what is the minimum that needs to be done either for WMMBID02 to have additional reason code field or for MBGMCR03 to become inbound-friendly?
Thanks in advance for any help!
Jay

More info? In WMMBID02 the field E1MBXYI-GRUND for reason code (as in table MSEG) is there but its text refers to Asset master records. It has only 3 characters allowed and refers to table T098.
The MBGMCR03 field E1BP2017_GM_ITEM_CREATE-MOVE_REAS (data element MB_GRBEW (same as in MSEG-GRUND)) refers to table T157D and has 4 characters and so seems to have no correlation with WMMBID02.
Anyone have any ideas? Can I still use the GRUND field from E1MBXYI?
Jay

Track inbound ALEAUDs for the outbound DESADVs

hi all,
I am send an outbound DESADV by triggereing an output type on the delivery.
I can track the outbound idoc for the delivery uisng NAST entries.
Now i get the inbound ALEAUD( an acknowledgemnet for the outbound DESADV). The inbound idoc contains the delivery no that was sent.
Programatically searching an inbound idoc with the delivery no takes more time as delivery no is not any key field in the idoc, it is avialble as sdata.
My question is , programatically is there any way of tracking the ALEAUD and DESADV for a particluar delivery?
Regards,
Chandan

Hello Chandan
If I remember correctly then the ALEAUD IDoc sets a specific status record in the DESADV IDoc (cannot remember which one).
Thus, if you want to select for outbound deliveries that have not yet been confirmed search for DESADV IDocs where this status is missing (or the other way around for confirmed DESADV where this status record is there).
Regards
Uwe

Tool to keep track of the changed code

Hi
Is there any tool to track the changes i made to the code..like for ex
if iam customizing somebodys code i need to know where exactly i made the changes..
Regards
vijaya

Hi,
SE38 and in menu
Goto--->attributes and found last changed by.....
Utilities>Version>Versionmanagement..
and compare two codes
Message was edited by:
Vishnu Reddy

Subtitles of the video wouldn't show up when I embed subtitles through track tag in html code

Used these two lines in <video> tag
source src="Game.of.Thrones.S02E03.HDTV.x264-ASAP.What.Is.Dead.May.Never.Die.mp4" type="video/mp4"
track kind="subtitles" src="Game of Thrones - 2x03 - What Is Dead May Never Die.720p HDTV.IMMERSE.en.srt"

I'm assuming you already have the subtitle file.
Here's something that might help.
**I'm not a developer so just try it out.**
A little tip: Rename your .srt and .mp4 to gameofthrones.mp4 and gameofthrones.srt respectively to make it easier.
Your original code is: 
 
''source src="Game.of.Thrones.S02E03.HDTV.x264-ASAP.What.Is.Dead.May.Never.Die.mp4" type="video/mp4" 
 
''track kind="subtitles" src="Game of Thrones - 2x03 - What Is Dead May Never Die.720p HDTV.IMMERSE.en.srt"''
However, try changing to the things in bold: (''with rename of files of course'')
source src="gameofthrones.mp4" type=video/mp4" 
 
'''track src="gameofthrones.srt" kind="subtitle" srclang="en-US" label="English'''
Try that out. Again, I'm not a developer.

No Company Code Track in Inter Company Code Transactions

Hi,
When we post an inter company code transaction system generates two documents in Both company codes involved in the transaction and an internal auto generated cross company code document number. But when i view these documents i am unable to see from which company receivable is standing and two which company payable is standing. it only shows in which company code the transaction was posted but no information is being provided against line item so that we can see on which company behalf have we booked or paid the expense. we are posting inter company code transaction through f-02. is there any other specific transaction code for this? or any report or any other way to view how much from which company is recyclable/Payable standing? please also not that we are using two different g/l for inter company receivable and payable.
Regards,

hi ,
Can you please post the screen shot of one of those document . IF i am not wrong you want to know that in which company ocde it posted . YOu can find out from the Number range and then Comapny code in Docuemnt number .( In this Trading Partner poplauted Automatically) So definately you need Tranding partner to do intercomapny reconciliation
IF you have Cross comapny code Transaction you will have cross comapny docuemnt number in FB03 as below which you can see in FBU3 .
Sometime you do not post Cross company transaction but you post in Individual companies with trading Partner .
in this case there will not be any cross company document .. Please check your OBYA configuration and check which GL code you have defined and whether you have maintaned the config tfor that

My simple Inbound ABAP Proxy code doesn't work in PI 7.1 EHP1 SP3 ?

Hi,
I just installed and configure new PI 7.1 EHP 1 SP3 and i tried some simple abap proxy but seems like doesn't work.
Please advise what is missing base on my simple abap code below :
=================================================================================================
METHOD zpi711ii_si_syn_in_aaeproxy~si_syn_in_aaeproxy.
**** INSERT IMPLEMENTATION HERE **** ***
DATA: inputdata TYPE ZPI711MT_REQ_1,
outputdata TYPE ZPI711MT_RES_1.
CONCATENATE inputdata-mt_req_1-firstname ' ' inputdata-mt_req_1-lastname INTO outputdata-mt_res_1-fullname.
ENDMETHOD.
=================================================================================================
i have put some break on the CONCATENATE seems like inputdata-mt_req_1-firstname is empty ? why ?
The sample xml input is :
=================================================================================================
<n0:MT_REQ_1 xmlns:n0="http://www.abeam.com/sample/pi" xmlns:prx="urn:sap.com:proxy:ST6:/1SAI/TAS1190827B531A473B357B:700:2008/06/25">
<FIRSTNAME>This is a string 4</FIRSTNAME>
<LASTNAME>This is a string 5</LASTNAME>
</n0:MT_REQ_1>
=================================================================================================
Please advise
Thank You and Best Regards
Fernand

Hi Fernand ,
Few things to check :
1. hope you are accessing the correct node of proxy structure and the correct message type too.
2.. If the occurrence of node is 1 to many than it will be a table type in that case your need to use a loop to access row values.
Make sure that you have used the correct message types for creating variables..
DATA: inputdata TYPE ZPI711MT_REQ_1,
outputdata TYPE ZPI711MT_RES_1.
--->inputdata-mt_req_1-firstname ' ' inputdata-mt_req_1-lastname
>once you have created the variable of particular messagetype than you have to use in this format inputdata-firstname and inputdata-lastname. seems some thing fishy here...inputdata-mt_req_1-firstname/lastname.
Regards ,

Idoc Monitoring (Inbound & Outbound Status codes)

Hi ,
In a scenario...whr IDOC has to be send to XI to file.....
and idoc is sent to XI ...if an error occurs ...wht is the process to troubleshoot...wht r the various reasons codes ? in a reverse way ..an IDOC needs to send to R/3 and an error occurs..wht is the process to trouble shoot....pls give a brief note on various idoc status ???
Best Regards,
Kir@n ; )

Main Tools
XI Runtime Workbench
Transactions:
●     IDX1
●     IDX5
●     SXMB_MONI
●     SM58
●     SM21
Analysis
For an overview of analysis steps see a very good link to troubleshoot
[http://help.sap.com/saphelp_nw04/helpdata/en/05/d5fc3f8fc2c542e10000000a1550b0/frameset.htm]

Changes to track in cjr2 t-code

cost Planning has been done in cjr2.
some one has made changes in cjr2?
hhow can i track, who has made the changes and wht changes he made?
Regards
SURYA

Hi,
Check if you hace this information in transacction CJI4 .
Regards,
Sara

Track INBOUND (BBP_EXTREQ_INB)- T-Code BBPTRACE

Similar Messages

Maybe you are looking for