Tranferring video between laptop and desktop

Is it possible to -via a USB/Firewire- to transfer some FCE work from my laptop directly to my Imac or do I need to pop it onto a DV tape and load it into the Imac?
Thanks.

You can transfer files from one Mac to another via Firewire using what's called Target Disk Mode.
To do this, power on your iMac while holding down the letter T key. Keep holding down the T key until you see the standard yellow firewire logo appear on the iMac's screen (that's all that will be on the screen, just the firewire logo.) Then connect your laptop to your iMac with a Firewire cable and start up your laptop. Your iMac will show up on your laptop's desktop just as if it were another disk drive. From there you can use the Finder (on your laptop) to copy files & folders to your iMac.
When you're done, shut down your laptop. Then turn off your iMac by holding down the power button until it shuts off. Then turn off the power to both Macs. Then unplug the firewire cable.
Voila ... done.
ps. This is not a hack ... this is a standard Apple procedure. And, obtw, it cannot be done via USB

Similar Messages

  • Moving Music Videos between laptop and desktop

    I have purchased 4 music videos from iTunes store. They are on my laptop. I was travelling on business and wanted to try out the new music videos.
    Now that I am home and using my Dual G5 desktop, how do I move or share these videos off my laptop top to my desktop? Is there any way to sync two iTunes libraries to keep them the same. Since I own both laptop and desktop seems rather stupid to not be able to do this.
    I really just started using iTunes when the video part was released, so I maybe overlooking something really easy to fix this issue.
    I have turned on iTunes music library sharing on the laptop but only audio music is shown when viewing from my iTunes desktop. No videos are listed. I event made a playlist folder on my laptop called Videos and copied the videos into this list.
    The list "Video" shows up when looking from my desktop, but no vidoes are listed in the playlist.
    thanks

    Bill,
    "Is there any way to sync two iTunes libraries to keep them the same. Since I own both laptop and desktop seems rather stupid to not be able to do this."
    I have the very same situation as many others do, so I've asked the very same question to an Apple Genius at the Manhattan Village Store in CA, and the answer is no. Why? You can have multiple iPods connected to a single computer, but not multiple computers connected to a single iPod. The reason for that is DRM.
    Your best bet is to keep both libraries synched using apps like "You Synchronize" or "Folder Synchroniser", this way you'll have the same library across both Macs, and you can use any one as a Master for your iPod. Works for me!
    * Guy

  • Using FF7; Syncing my data between laptop and desktop; everything syncs fine, but for the tabs. I have no history of the open tabs of the other device, nor can I find an option to let start a session the latest session of the other device

    FF7.0 beta
    sync on laptop and desktop
    no tab history of the other devices
    solution to start session with latest session of synced device?
    win 7 64bit

    Good instinct not to shut down!
    Open your current Firefox settings (AKA Firefox profile) folder using
    Help > Troubleshooting Information > "Show Folder" button
    Copy all sessionstore files (e.g., sessionstore.bak, sessionstore.js) to a safe location (e.g., your Documents folder). Whatever was saved before is in one or both of those files.
    This problem of a window sometimes loading the correct number of tabs but the tabs not being navigated to the corresponding pages has been mentioned before, but I do not recall anyone identifying what causes it or how to solve it. If Firefox saved the URLs of those pages, they will be in one or both of those sessionstore files.
    These threads have suggestions on how to "mine" the old file to extract the URLs:
    * Using Firefox's Browser Console (formerly known as Error Console): https://support.mozilla.org/en-US/questions/969046#answer-471950
    * Using Firefox developer tool "Scratchpad": http://forums.mozillazine.org/viewtopic.php?f=38&t=622036&start=60&p=12098147#p12098147
    * Using a third party website: https://firefox-session-restore.herokuapp.com/
    Can you recover them?

  • Syncing Lightroom between laptop and desktop

    I  did large, two day studio shoot last week.
    I do the majority of  my work on my desktop, and for the first time I used a laptop for this  shoot.
    I used an exteranl hard drive that I plugged into the laptop, and I kept my catalog and all my images on that external hard drive. I shot tethered directing into Lightroom. I did a little  work at the shoot, changing things in the develop module, cropping, and  adding metadata.
    Now, I'm at home, I've got my external hard  drive still plugged into my laptop, and on my  laptop I selected all my images and chose 'Save Metadata to file'  (command S) so all my changes would transfer.
    A window popped up that said 'One or more of these  photos has been changed in an external application. Should Lightroom  overwrite the Settings on disk??' I then have the option of hitting  'cancel' or 'Overwrite Settings'.
    I'm confused by this as I have  only amended these images in Lightroom. If I say 'Overwrite Settings',  will I loose information? For example, every image has been cropped, but  I would like to be able to retain access to the full image, and I'm  nervous if I hit overwrite settings I'll lose this.
    Am I being crazy?
    Ellen

    Ellen,
    This is a long-standing bug that seems to get better but never completely go away.  There is probably one or two images that LR "thinks" have been changed from somewhere outside of LR and when you select all images it is just telling you that at least one is in this state.  Unfortunately there is no way I know of to sort or automatically isolate images with potential metadata conflicts except to browse the grid display looking for conflicting icons.
    I usually select less than all (say 40 or 50 at a time) and keep saving until I isolate the image or images that is in question such that I save data to all the other images that are not in conflict first, then attack the error images one at at time.  In all cases though, I end up overwriting the data since I trust the database of LR to have stored the most correct data.  I just want to know what images were at risk so I can review them immediately after overwriting the data to make sure indeed they are alright.  I generally use a temporary quick collection to isolate them.
    The good news is I have never had a result that required me to go back in and re-develop an image.  The bad news is I still am not comfortable hitting "overwrite" after selecting all images and just letting it rip.  Hmmm ...
    Jeff

  • Share one copy between laptop and desktop Macs?

    I intend to do recording with Logic Express on location using my MacBook, then to transfer the projects to my desktop Mac with the good studio monitors and work on them at home. Do I have to buy a 2nd copy of LE8 to do this legally?

    The package showed up today, and yes, it explicitly states in the license that I can install one copy on my laptop and one on my desktop.
    I wasn't sure if the fine print differed across the Atlantic. Thanks Fox!

  • Having problems transfering music to my Nano between laptop and desktop.

    Recently my desk top PC broke down. I then got a Nano for my birthday (cool) so bought some podcasts and tracks from i-store and downloaded a small proportion of my cd collection using my laptop. For some reason it takes a couple of hours to download a cd into i-tunes. For that reason, now my PC is back with me I downloaded the rest of my cd collection onto the hard drive then transfered the music into the recently installed i-tunes.
    Here's the problem, when I connected the nano to the PC for the first time I was asked if I wanted to replace the present library (laptop) with the new PC library. I want both as I don't see how to get the bought and paid for stuff off the laptop, onto my PC and then on to the Nano.
    I can understand why this may of happened as you could just plug your i-pod/nano etc into someone elses laptop and bootleg their music but I don't want to have tp pay for my downloads twice. Can anyone help me out?

    your iphone can only synce with one pc at a time, but when you want to add songs to your iphone for another pc, and you don't want to lose the data that you already have,
    1- on your music store creat a new list(on your iphone)
    2-press synce
    3- the songs that are on the pc, drag them to the play list you created and synce.
    that is what i always do

  • Coordinating Aperture between laptop and desktop

    I'm working on a photo archival project that involves several thousand images, mainly scanned.
    I do my scanning and image cleanup on my desktop (a 24"3.06 GHz iMac with 4 GB RAM). Then import the images into my Aperture project.
    However, when I am meeting with colleagues working on this project, I need to use a laptop (Macbook Pro 2.4 GHz, 2gb RAM) so we can meet outside my office.
    Here is my question: how can I keep the copies of the Aperture project on both computers reasonably synchronized?
    Thanks for any advice.
    Rich

    I have a single Aperture library that I move between my desktop G5 and my laptop MBP.
    The library resides on a portable 2.5" drive (200 GB) that has both eSATA and USB 2.0 connections. On my G5 I get the speed of eSATA, and when I'm using my laptop, the USB speed is tolerable.
    The great thing is, I keep some images IN the library (managed), and most of the images on another, much larger drive (referenced). Any projects I'm actively working on, I can keep the images managed in the Aperture library, so I have them on both my desktop and laptop. The rest of the images I simply "push out of" the library and reference them on the big hard drive, which stays attached to the desktop G5.
    For me, this arrangement works very well. If I am on a trip, shooting, I create a new project and Aperture "manages" my images in the library. When I get home, I tell Aperture to "push" the images in the new project out to the big hard drive, and "reference" the images. It works quickly and easily.
    Perhaps something similar would work for you?
    Enjoy!

  • Synchronizing user data between Laptop and Desktop

    We have a Macbook and an iMac. While my kids and wife went to visit the Grandparanets I lent them my Macbook, used SuperDuper to create a copy of my Laptop's drive and booted it on the iMac (ok, that is pretty cool!).
    All worked very well and now they are returning and I need to merge the information on the Macbook itself and the SuperDuper drive I have been using on the iMac.
    There are multiple user accounts on each and all that was really added on the Macbook would be photos and movies and iTunes music one 3 of the accounts.
    Is there an easy way to sync user accounts between two computers? I am quite familiar with .mac and syncing wha I would call preferences. It cannot handle stuff like synching iTunes, iPhoto or iMovie though.
    Appreciate any suggestions
    JIm

    Well ... here is what I ended up doing. Hope it helps someone
    Once the laptop came home:
    1. I made a SuperDuper image just in case (to another Firewire drive partition)
    2. Then I logged into the user accounts on each and used Backup to backup Home, iLife ... for each user on the laptop that logged in while they were gone (I asked them)
    3. Then I used SuperDuper to overwrite the hard drive on the laptop using the SuperDuper image on the Firewire drive.
    4. Then I logged into each account on the laptop where I backuped up data and restored it.
    It took a little while but everyone is happy and has their data

  • Transferring photos between a laptop and desktop

    I am using Lightroom 3 on a laptop and desktop.  I am trying to export photos with adjustments that I have made to my desktop.  I have selected the photos as tried to export as a catalog and have checked the boxes for export negative files and include available previews.  I saved the files to a portable hard drive and then tried to import the files into lightoom on my desktop.  Only the original photos (with no adjustments show up).  Any help would be greatly appreciated.

    Instead of importing the files try importing the catalog.  The catalog contains your information about the adjustments.  The catalog you exported can be moved to your desktop machine and you can use your master catalog on you desktop to import the record from it.

  • Recommendation on laptop and desktops capable enough for full Adobe suite

    To: Adobe Community
    BACKGROUND:
    I've been using Creative Cloud for about 1 year now, and many of the CS6 titles.  One thing this has exposed with my
    laptop and my desktop is that they no longer have the memory or GPU horsepower to keep up with the software.  For
    example,  Photoshop has many very GPU intensive features, and my sad little Dell Latitude D630 (yes, a 4 year old
    laptop) doesn't even have a GPU that will work, and I can't really add one on for this sad little laptop.  I also have
    a Dell XPS with 2 older nVidia GPUs, and I can use all the new features, but my GPUs sound like they are going to take
    off when the processing gets intense.  So,  I'm looking to get 2 new systems (a desktop and laptop).   
    I've looked at some of the higher end gaming systems, but I'm not really a gamer.  My preference would be to
    get a laptop and desktop that have similar specs so my work can sync through my cloud account as I work on it.
    Too bad this syncronizaton agent is out and won't come back until June 17, anyway, I digress.
    I've been looking at some of these new Intel inspired systems, but haven't really dug into what GPUs they have.
    For the desktop, I need to drive 4 displays.
    QUESTION TO THE COMMUNITY:
    - If anyone has been in a simular situation, and have acquired a new high end system (desktop, laptop, or both)
    to use the Adobe CS6 suite to its max, what system configuration did you go with?
    - Make/model/price, and specs would be appreciated.
    - If you are like me, you probably spend more time and energy researching a system than what it is worth, and compare
    specifications, reviews, etc.  So my goal of this post is to see if folks that have done this research and are
    very happy with what they acquired would be willing to share with others who want to make similar IT upgrades.
    Thanks in advance to anyone who can contriute this info.  Yes, you would be giving away your homework, but making
    others very happy in the process.
    John

    I suggest you go to the Adobe Hardware Forum and see what has been asked many times. Also consult the FAQ section there and look at the popular discussions on the right hand side. Lots of info there. Another source for some ideas may be Intro Part 1 and all of the following pages. Also look at Adobe Community: What PC to build? An update...
    The basic information lacking in your post is available budget for the desktop and budget for the laptop. Without that info, it is impossible to suggest a high end system, also because you don't mention what kind of workflows you have in mind.
    What is high-end for what purpose and with what budget? If the bulk of your work is with Illustrator and PS then high-end means something completely different than using mainly AE and PR. In the latter case the nature of your source material makes a huge difference. Editing 4K material and using multicam edits quite often means a completely different high-end system than single track HDV or P2 material. It can mean the difference between a $ 2K, $ 7K or even a $ 25K machine.
    General advise: Don't buy from a tier 1 company like Dell or HP unless you have a big budget. If you want to save money, build it yourself. If you think you need to buy a system, consider a custom builder. (I have a high-end DIY system, I think, at around € 7K and getting a system with the same performance from HP would cost around € 25K).
    If you want to get the best 'Bang for the Buck', BFTB, you need to build it yourself, assuming video editing is part of your workflow.

  • My friends updated laptop and desktop says "address book" while mine says "contacts"

    What is the difference between "Address Book" on my friends updated apple laptop and desktop and my desktop and laptop which says "Contacts"?

    The difference is different versions of the operating system. "Contacts" was called "Address Book" prior to 10.8 (Mountain Lion).

  • Synching Itunes Account Content on HP Laptop and Desktop

    In my home office I use an HP desktop and when travelling use my HP laptop. I have one Apple account that has all my music on as well as purchased movies from iTunes. I also have a load of "Home Movies" that are from my DVD collection.  Some of the Home Movies do not appear when I am in my account on my laptop and the others do not appear on my desktop. I don't understand why this is as i have uploaded Videos using both laptop and desktop? Any clues how to synch the two? I have also now purchased Apple TV and when I go to Home Share, two separate accounts are shown with the same name? Surely there has to be a way to sync? 

    You can have a maximum of two installs. Can be PC/PC, Mac/PC or Mac/Mac; any combo.
    Should be no need to register as long as you've signed in with your Adobe ID? (Best way to do all this is via the Creative Cloud Desktop app.)

  • When frequently switching between mobile and desktop view

    When I frequently switching between mobile and desktop view I have to open the layers every time since they get closed/collapsed. Adobe may need to fix it for the next version.

    You can use CTRL+# to switch between Code and Design View.
    By the way, this is the Dreamweaver Application Development forum which deals with questions about using server-side scripting languages like PHP or ColdFusion. General Dreamweaver questions should be posted in the regular Dreamweaver General Discussions forum.
    And while I´m at it: please use descriptive headlines such as "how to switch between Code and Design View" for your posts -- mentioning your screen name "Goula129" is not helpful to other users.

  • If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

    If I purchase Adobe Creative Cloud for student, can I have the programmes on both my laptop and desktop for the same price?

    Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
    -Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
    -Windows or Mac does not matter... 2 on the same operating system, or 1 on each

  • Can I install Creative Cloud on both my laptop and desktop?

    I'm an educator considering CC. Can I run it on both my laptop and desktop with one subscription?

    Yes you can install and run CC subscription on upto 2 Computer (Your Laptop + Desktop).
    Regards,
    Jatin Dembla

Maybe you are looking for

  • What is the part number for the fan for the dv7 2270 us

    what is the part number for the fan for the dv7 2270 us

  • Numbers crashes when scrolling

    Since updating to IOS 8, including all subsequent updates released for IOS 8, Numbers has exhibited crashing when scrolling horizontally or vertically when the spreadsheet exceeds the screen boundaries.  I have erased Numbers from the iPad Air (sympt

  • HT2305 just downloaded quicktime player, tried to play avi file and all I had was a black screen. HELP!

    I'm just after attempting to play an avi file with Quicktime player on windows7 and all I got was a blank screen. Is there any particular reason that this is happening, or is quicktime incapable of playing avi files without going pro?

  • Firewire 800?

    Hi, I have a MacBook Pro that I purchased in June, 2010. I also have a Canon miniDV camcorder that uses firewire 400 that I used with my old mac (that no longer works) and I'd like to be able to edit my videos on my new mac. From what I understand, t

  • Bulk Collect ... FORALL...Insert

    Hello, This works fine but when I want to insert the data in selective columns of TEST2 from TEST1 ,it raise "NOT ENOUGH VALUES" create or replace Procedure Proc_test(p_batch_id IN TEST.BATCH_ID%TYPE) is TYPE l_test IS TABLE OF TEST%ROWTYPE index by