Transaction an user was running for a given period

Hi All,
Can any body tell me ho to get the compleate information what all the transaction executed by an user in a perticular period.
I have tried STAT and STAD.
But couldnt get the information required.
Regards,
Sekhar.

Hi,
Use ST03N. Transaction profile, You will get all the transactions
for all the users try to filter them out.
Regards,
Vamshi.

Similar Messages

How to find what transaction an user was running for a given period

hi
could anybody tel me
how to find what transaction a particular user was running for a given period
in the past.............

Hi,
U need to findout the list of Tcode excuted by SAP user
1) Tcode: ST03N
2) Select Expert Mode option
(there u find Server Host name & Today)
If u select Host name u find DAY/WEEK/Month (same thing will in Today option)
3)Now u need to select the option of DAY,WEEK etc.
Now u can find in two ways
1) Transaction profile (Standard / EarlyWatch)
2) User (user profile)
If u select the Transaction profile
Under these u find the option of Aggregation----application/package/tranasation etc.
I hope these will help u to findout.
Regards
ASR

To find whether the reports are in use or not for a given period

Hi Basis Gurus,
We have an requirement here that the client wants to know that the whether the reports for a given period are in use (working) or not.
I think we can do it when we have audit logging activated ,but now we dont have audit logging activated now.
Let me give you an example below
Suppose for past 1 year 100 reports are prepared and out of 100 reports 95 reports are not working and remaining 5 reports are working.How can i get the detials from the SAP system without audit logging activated.
Please help me
Regards,
Anil.

Hello,
See if ST03N helps you.
Switch to expert mode in ST03N. Naviagate to Workload > Month > month . Click on the available month. Then in the " Analysis Views" visible on the lower LHS, Select transaction profiles > standard. See if you have your 'Z' report in that.
Thanks and regards,
Anish

Generate report for employees on leave for a given period

Hi,
I want to know how can i extract a report of a list of employees who are on leave for a given period of time?
For instance i want to a list of employees who are on vacation / leave (any kind of leave) for the period of April 2010
Is there a standard report to generate this info? or any other way of doing it?
Regards,
Humaira

HI all,
Thanx for the response.
The info set Query was great help.
the Tcode PT_QTA10 only gives me the leave Quota of the employees which was also helpful. Thanx
Regards,
Humaira

Automatically log back in for a given period of time

I just started to work on web and have the following issue:
We want some (mobile) users to be able to automatically log back in for a given period of time. It is not difficult to set cookie (valid user information without clear text) on the mobile device. For now the question is how we can log in using this cookie info.
Web application uses "j_security_check", "j_security_check" checks the user/password.
Question is how we can autologin using cookie information. Thanks guys!

it is not problem to check cookie on exists and valid. Problem is 'where' where can I do it using 'j_security_check'

Easy way to schedule a job to run for a set period?

Is there an easy way to schedule (dbms_scheduler) a job to run for a set period -say, half an hour- and then to stop.
Currently, I schedule a procedure to do the work (a bunch of inserts or updates, say) and the first line of that procedure assigns sysdate to a variable when it starts. Then as the procedure loops through its work, I compare the current sysdate with that original one, and if the new sysdate>original one by more than 30 minutes, I raise an application error. But it's messy, and I was wondering if there was a nicer way of doing it?

"Admin" -I think you'll find that 'end_time' merely states a time after which the job will not be run. It doesn't do anything to kill off a job which is already running at the time that comes round. Similarly, repeat_interval merely states how often the job should be run, not a time interval within which it must run and outside of which it must stop being run.
Satish: your suggestion looks great. Do you have, or know of, any examples where that is used, though? The doco you pointed to says the parameter raises an event, but that it's up to my event handler to deal with it. I wouldn't have the first idea of how to deal with this in code myself. If I could see a simple example, it would help a lot! Unfortunately, that page doesn't contain such an example!

Pending GR / IR Balances report for a given period

Hi,
How can you check pending GR / IR doc's for a given period ? In MB5S there is no date field in selection sreen as well as output layout.
Please give suggetions .
Thanks & Regards,
Aruna.

Hi,
Check ME2l, ME2M report..use Selection Parameters as "RECHNUNG" for pending IR and "WE101" or "WE103" for open GRs and ur required selection of vendor, material and document date
Regards,
Vikas

Material stock received and issued for a given period of time

HOW to get the material stock received and issued for a given period of time including the open orders.
if there is any BAPI Available then please tell me. or give me the table relations thaks.
thanks inadvance

hi friend,
Why don't you try using a TIMER. Try using this code
Timer timer = new Timer((TIMER), new ActionListener()
public void actionPerformed(ActionEvent ae)
// perform your task here...
timer.setInitialDelay(TIMER);
timer.setRepeats(true);
timer.start();
I think this will work fine.
Bye,
Ravi.

Need a function to calculate employee attendance data for a given period

need a function to calculate employee attendance data for a given period
as
Working days,
CL ,
SL,
PL,
LWP
regards,
Gaurav Sood.

Issue resolved

BAPI to extract from MBEW/MBEWH for a given period

Hi ABAPpers,
We have two tables MBEW and MBEWH for Material Valuation. Based on the changes in few fields like VERPR, the record in MBEW will be transferred to MBEWH. Is there any BAPI that helps me to extract the data for a given period of a given fiscal year without asking me to probe from which table we need to fetch data from and which record in MBEWH is valid for that period of that year. Please suggest possible ways to do it.
Thanks.
Edited by: VKUPPILI on Dec 19, 2011 2:53 PM

Hi
Although it's not your question, see SAP Note 193554 - Stock/valuation data of previous periods, I think that it helps you to understand how to understand how to work the history tables.
I hope this helps you
Regards
Eduardo

Projectwise settlement report for a given period

Dear PS experts,
Is there any report which i can see the projectwise settlement to AUC, Fixed asset and Cost center for a given period?.
Regards
Vetrivelan.

May be you could try Tcode : KSB5 to see the settlement documents through dynamic selection and export to excel and filter it for your project.

Posting an unplanned depreciation run for the previous period

Hi SDN forum,
May I just ask if it's possible to run an unplanned posting run for a previous period wherein the depreciation run has already been executed?
The scenario is more like a "repeat unplanned posting run"
I can't seem to include this unplanned depreciation whenever I select the repeat run for the previous period.
Please help.
Thanks

Hi
Through T.Code: ABAA you can able to post unplanned dep for previous period.
Executing AFAB for previous
1 - open FI Periods (OB52)
2 - Post Unplanned Dep T.Code: ABAA
3 - Run AFAB with Repeet run & Test run
you feel it is ok with test run execute production run
Regards
Viswa

Query on a transaction table breaks after running for sometime - Oracle 11g

Hi,
I'm running the below query to pull the sum of amount on trans table (which has 12 years of data partitioned yearly) whose last transaction date is 19-MAY-2013. The calendardatekey column is the one which is used in place of transaction date (each day has a unique calendardatekey). The query runs for couple of hours and breaks. When I contacted DBA they told that its trying to do a full table scan and pulling huge amount of data and doing a kind of sort and then breaks. Could someone please help if there is a better approach? If it works out for one day I will have to perform this for few more days.
Oracle version - 11g
trans table :
columns customerkey, programid and amount - are indexed.
card table :
column customerkey, status are indexed.
select t.customerkey, t.programid, sum(t.amount), max(calendardatekey) from trans t
where
exists (select null from card c where t.customerkey = c.customerkey and c.status = 'A')
--and t.programid = 10
group by t.customerkey, t.instprogkey
having sum(t.amount) < -100
and max(calendardatekey) =4888
Thanks for your help!

doubtsinora wrote:
Hi,
I'm running the below query to pull the sum of amount on trans table (which has 12 years of data partitioned yearly) whose last transaction date is 19-MAY-2013. The calendardatekey column is the one which is used in place of transaction date (each day has a unique calendardatekey). The query runs for couple of hours and breaks. When I contacted DBA they told that its trying to do a full table scan and pulling huge amount of data and doing a kind of sort and then breaks. Could someone please help if there is a better approach? If it works out for one day I will have to perform this for few more days.
Oracle version - 11g
trans table :
columns customerkey, programid and amount - are indexed.
card table :
column customerkey, status are indexed.
select t.customerkey, t.programid, sum(t.amount), max(calendardatekey) from trans t
where
exists (select null from card c where t.customerkey = c.customerkey and c.status = 'A')
--and t.programid = 10
group by t.customerkey, t.instprogkey
having sum(t.amount) < -100
and max(calendardatekey) =4888
Thanks for your help!
"and breaks" is totally devoid of actionable information. Surely you got an actual error message (ora-nnnnn) that you could share with us?
Sounds like your DBA is trying to avoid providing any assistance .....

Batch wise stock for a given period or month

Hi,
My company wants to implement stock ageing report in MM.
We manage the stocks in Batches. For us the main criteria for stock ageing is batch creation date.
The report should run stock ageing based upon the date range given as an input screen
For ex : date range in input can be of today or as of 30.06.2010.
If the report is run as of today then I am able to get the batch stock from table MCHB . Quantity from field "CLABS" and the batch creation date from the field "ERSDA"
But if the report to be run as of 30-06-2010. Then I am not able to get the data from MCHBH as of 30.06.2010.
I have checked for one material in the table and as per stock it should be 351 as of 30-06-2010 but in the MCHBH table for the month 06. year 2010 it is showing as 136 pcs only.
As our LIS tables are not getting populated correctly I am not able to check those tables too.
Can any one guide me with the logic or the table where I can get the batch stocks for a particular month.
I need Material, Batch, Quantity month and year .
Please advice how can i get the data and from which table.
Thanks you for your support in advance.
Regards
Fazal

Hi Jurgen,
Thanks for your reply. I am not looking for any analysis report or LIS report.
i am looking for simple ageing report for a date entered by the user. I got the logic and tables for the current date but if i need to refer the stock ageing of previous date like my stock ageing at 30-06-2010. I am not able to get any tables where i can have the batch stock for a given date or a month.
The report output format to be
stock <=30 days
stock>30 and <=90
stock>90 and <=180
stock>180 days
The criteria for calculation will be the date entered by the user in the input screen. If the user enters the date as 30-06-2010 then all the stock received in the month of june and still lying in my storage location will fall the category <=30 and display in the report.
Stocks received in the month of march, april and may will fall under the category "stock >30 and <=90".
If I can get the batch wise stock for a particular month , I can pick the posting date of the Goods receipt from the batch number and calcuate my ageing (i.e date entered in the input scren of the report 30-06-2010 - batch posting date).
I am also referring to the note which you have sent but in the mean while if you can help me to identify the tables where I can get the batch stock for a particular month.
Thanks
Fazal.

Sequence Usage for a given Period

Hi All,
We would like to log the activity happening on a sequence and its usage in RAC environment. i.e In simple words
we would like to know the increase in the maxvalue of the sequences for a given range or period say on a given Day @ 9.00 AM start of business hours the Seq.currval returns 100 and @ 3.00 PM same day same Seq.currval returns 500. How or Where to get the sequence which was heavily used during a day/period/time, can we have this information from ORACLE metadata repository. We want to cache those sequences which are heavily being used in DMLs for a specific range/period, all though from the development perspective we might be able to answer this we want to know whether this is possible from querying metadata. Hope to have a healthy discussion on this.
Note - We are not storing the Sequence values in any of the physical tables in our schema.
Thanks in advance.

Thanks Asif for your participation. But we have around 900 sequenecs in our schema and we dont want to do this manually and we seek a way where System can say this to us by querying the metadata. Dont we have any metadata views which can give us about this particular data, we dont want to compare the snapshots between a period.
We invite more participants.
Thanks in advance

Transaction an user was running for a given period

Similar Messages

Maybe you are looking for