Transaction history for the database for 1 month
Hi,
I am looking for option in grid control which can give the information of trasaction history graph for 1 month.
Which is the option if available in grid control to find that.
Thanks in advance.
hi,
Am not sure if there is anything in GRID that will show this as a separate report.
You maybe able to get into the performance charts and look at AWR but this will I believe be on an hourly basis only.
you best bet may be to try and get the information directyl from the WRH$ tables in the database.
regards
Alan
Similar Messages
-
when i put firefox in offline mode, and then click on pages saved in history , it can't load any pages or any images. i put cach size to 250mb but the problem is the same, it saves history for two months, but can't load pages.
Hi there,
When I inspect your site in browser tools, I'm getting 404 errors from your page:
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (jquery-2.0.3.min.map, line 0)
[Error] Failed to load resource: the server responded with a status of 404 (Not Found) (edge.4.0.0.min.map, line 0)
BarnardosIreland wrote:
I would have thought that publishing should give a complete package that doesn't need any further edits to the code and can just be directly ftp'ed to the web - is this correct?
In general, you are correct - but also your server does need to be properly configured (and those errors above lead me to think it may not be) to serve the file types that your uploading - but it could be something else entirely. Can you zip up your composition folder, upload it to your Creative Cloud files, set it to share, and then post a link here so I can download it? If you'd rather not share it publicly, can you PM me with a link to your composition files?
Thanks,
Joe -
Where can I find the history in Safari? It shows only 2 days while I have saved the history for 1 month.
Hello Barbara,
Thank you for the question. It sounds like you are only seeing the 2 most recent days of your web browsing history in Safari.
If you haven't tried this yet, I suggest going to History > Show All History when Safari is open to see if more sites come up. You can find this step and more information at the following link:
Safari 6 (OS X Mountain Lion): Revisit webpages
http://support.apple.com/kb/PH11850
Thank you for using Apple Support Communities.
Best,
Sheila M. -
Want Transaction History for Particular Transaction for Particular User. .
Hello Friends,
I have one query.
I want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
One USER_ID in SAP Server is shared among 6-7 people to do their work.
So, I want to know that from which terminal that user has run that transaction to do its work on particular Date/time.
I tried STAT, STAD, ST03N, but did not help me very much to get deep level information.
May be, i am missing something to get the solution for this kind of situation.
Any Solution for this kind of Situation ?
I am waiting for your valuable Response.
Regards,
Bhavik ShroffI want to get detailed Transaction History for Particular Transaction for Particular User_Id for particular Time/Date period, with his/her Terminal ID info ,also.
ST01 will give you the Result after switching on the TRACE. I want to get Transaction History for a particular DAY/Weeks/Month .
e.g.
One User Id is shared among 6-7 people. One of the person did something using FB08 transaction on last 08/07/2008. But, as the User ID is shared among several User, How can i know the person who did that change and from which place/Terminal.
See,
I have the following information to fire the search.
-> User Id information
-> which transaction he/she used to do that work
-> When he did the change for something (means i know the exact date)
But , I want to know ,from which Terminal he/she executed that transaction, as the User ID is shared among several people.
You tell me the way ,so that i can have total required information for this kind of situation.
If i am wrong at any step , then let me know.
Regards,
Bhavik Shroff. -
How to find, the growth of the database since last month?????
How to find the growth of the database since last month
my db name is orcl
There are multiple operations perfomed in my database.......I want to find,
how much my database is increased with the last month......
Thanks in advance.......Define what you mean by growth?
More datafiles
More tablespaces
More table rows
More objects
More operating system space used
In what version to four decimal places?
On what operating system? -
Copy of Transaction History from source Tran to subsequent Tran
Hi Experts
I have a requirement where I need to copy the Transaction History (DOC FLOW) of the source Transaction(Service Complaint) to Targert Transaction(Repair Order).
i.e when Repair Order is created as Follow-up transaction from the Service Complaint(It has Service Contract in the Transaction History), while Repair Order creation it prompts the Item to copy from Compalint , Item is getting copied to Repair Order successfully, but Item related Service Contract is not copying from the Compalint Transction History to Repair Order.
Here I can impliment CRM_COPY_BADI, Method DOC_FLOW to copy Service Contract from the Transaction History of the Compalint to Repair Order.
If my approach is correct, Please share the sample code from the Method DOC_FLOW for this.
if it is not correct way of doing, Kindly suggest me the other way to achive this.
Thanks
ChandHi Chand Basha Shaik
While creating the follow up documents we can make use of CRM_COPY_BADI , to fill the required standard fields or custom fields.
You can make use of several API function modules related to document flow say for example if your want to read any runtime data from buffer related to document flow we can make use of the function module CRM_DOC_FLOW_READ_DB. Given the relevant code snippet
CALL FUNCTION 'CRM_DOC_FLOW_READ_DB'
EXPORTING
iv_header_guid = lv_guid
IMPORTING
et_doc_links = lt_doc_links
EXCEPTIONS
error_occurred = 1
OTHERS = 2.
Thanks & Regards
Raj -
How can I erase my call/SMS history on the website...
I really need to erase my call and SMS history on the website, they keep my history for 6 months, but I really need to erase it all now. Thanks in advanced
Call the number on the screen. It obviously was lost and belongs to someone else. You won't be able to activate and use it anyway.
-
Entity Bean Rollback fails: caches are out of synch with the database
We are encountering a critical issue where the rollback of a session transaction rolls back any database changes, but doesn't roll back bean changes in memory. When we next access the bean, it returns information that should have been rolled back. The memory cache is out of synch with the database.
We have a simple session bean S, using container managed transactions. We also have an entity bean E using bean managed persistence. E has a single member <name>.
We implement a method s() in S with <trans-attribute> Required as follows:
public void s() {
Context lookupContext = getLookupContext();
SHome shome = (SHome) lookupContext.lookup(SHome.NAME);
S s = shome.findByPrimaryKey(thePrimaryKey);
System.out.println("-- current name = " + s.getName());
s.setName("IGNORE");
EJBContext ejbContext = (EJBContext) getContext();
ejbContext.setRollbackOnly();
Since this is BMP, the setName call issues our SQL update against the S record. When the session transaction rolls back, the database changes are also rolled back. But the entity bean in memory shows the modified name. We can see this in the next call to s() since the getName() returns IGNORE rather than the original value. We have also gotten debugged into the underlying instance cache associated with the S bean descriptor. I.e.
AbstractEJBHome ejbHome = (AbstractEJBHome) lookupContext.lookup(SHome.NAME);
AlternateHashTable aht = ejbHome.getBeanDescriptor().getCache();
Looking at this map of bean instances also shows that the bean instance for S is not rolled back.
From previous conversations with the server technologies team, we understand that during the transaction, we should be working on a cloned copy of the S bean. Upon rollback, the copies should be discarded rather than merged back to the cached bean. They seem to be merged regardless of rollback state.
We are using OC4J 10.1.3.0.0 (build 060119.1546.05277).Actually, what one or the developers in my group found out is two things:
1) The clone is a shallow copy.They copy the references but not objects themselves. This has been causing problems for us.
2) It seems that you don't work on a copy and you work on the original and they keep a copy. Now, this is fine IF you don't have multiple threads working on the same Entity bean and we moved our application from Weblogic where it throws an exception if that Entity bean is in use to OC4J which is suppose to copy the bean and doesn't so you have multiple threads possibly modifying the same object. -
Refresh Follow up Transaction History Assignment Block on Save
Hi All,
I am doing a requirement where I am creating follow up Chargeback document (marketing) from Claim on click of Save.
I am able to create it using code written in manual button event handler, but the transaction history of the document is not refreshed immediately.
Though when i open the follow up document it is there and when I open the original document again it is there as well. That is, though the link has been created, but how to refresh data of transaction history assignment block on click of Save button of preceding document.
Please suggest if someone has worked on a similar scenario somewhere (may be from Lead to Oppt creation on save).
Thanks and Regards,
Rohit KhetarpalHi Rohit
I believe it is in the buffers so maybe you need to trigger an Server Roundtrip dude on this scenario so that refreshing happens and the same gets reflected on the UI
(OR)
Since it is in the overview page do a reread on the entity say in do_prepare_output to get the latest one
(or) use the publish_current() to publish the entity in do_prepare_output.(this will automatically do a re-read i believe)
Thanks
Abishek -
Transaction history of a user for a period of 6 months?
Hello All,
How to get a transaction history of a user for a period of 6 months? I also wish to know if we can take the report month wise by specifying start and end date.
please suggest,
Regards,
RaviHi Ravi,
You will have to activate trace for the particular user. If you have not then try this:
SE16
Table: CDHDR
Either the date period or the tcode to searched for. Add all the columns to the spreadsheet. Here you will get the list of all the important hits to your sap database. Add filter to the user Id if you want to trace for a particular user.
Done. You have all the important history of the sap hits via User ID.
Hope this helps.
Pranay -
Adding Data to the database for SAP Transactions
Hi
I'm new to the whole ABAP. I would like to enquire about adding transaction data in SAP through ABAP but it must be immediate.
I know that one can use a BAPI to add data and can rollback if any problems occur.
But if no BAPI exists how does one write code to add a document to the SAP database but with everything SAP transaction requires like the BAPI. What is the process and how???
So let say I wanted to do FB01 which is SAP FI document and must be immediate. There is a BAPI that exists for it but if there was not one how would I do this???
I know one can also use BDC but that creates a batch and then needs to be executed in SM35, I want a way to add data for two or three SAP transactions, if any problems occur with any of the steps rollback everything else commit everything to the database.
Any simple detail examples (code) that satisfy the above will be greatly appreciated and REWARDED.
Thanks in advanceLuis,
i have a code exactly same BDC for FB01.
refer:
REPORT z_etching_fb01
NO STANDARD PAGE HEADING LINE-SIZE 255.
*etching invoice load
INCLUDE bdcrecx1.
TYPE-POOLS: truxs , slis.
*PARAMETERS: dataset(132) LOWER CASE DEFAULT
* 'c:\temp\etchingload.txt'.
PARAMETER: pfile LIKE rlgrap-filename." OBLIGATORY.
SELECTION-SCREEN BEGIN OF BLOCK a WITH FRAME TITLE text-001.
PARAMETER: p_kunnr LIKE kna1-kunnr OBLIGATORY, "kna1-kunnr
p_bukrs LIKE bseg-bukrs,
p_mwskz LIKE t007a-mwskz OBLIGATORY,"t007a-mwskz
p_prctr LIKE cepc-prctr OBLIGATORY,"cepc-prctr
* p_newko LIKE ska1-saknr OBLIGATORY DEFAULT 41000000,"
p_budat LIKE bkpf-budat OBLIGATORY ,
p_hkont LIKE bseg-hkont OBLIGATORY DEFAULT 41000000 ,
p_waers TYPE waers OBLIGATORY DEFAULT 'GBP'."tcurr-waers
SELECTION-SCREEN END OF BLOCK a.
SELECTION-SCREEN BEGIN OF BLOCK b WITH FRAME TITLE text-002.
PARAMETER : report AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b.
*** DO NOT CHANGE - the generated data section - DO NOT CHANGE ***
* If it is nessesary to change the data section use the rules:
* 1.) Each definition of a field exists of two lines
* 2.) The first line shows exactly the comment
* '* data element: ' followed with the data element
* which describes the field.
* If you don't have a data element use the
* comment without a data element name
* 3.) The second line shows the fieldname of the
* structure, the fieldname must consist of
* a fieldname and optional the character '_' and
* three numbers and the field length in brackets
* 4.) Each field must be type C.
*** Generated data section with specific formatting - DO NOT CHANGE ***
* ALV *
DATA: it_fieldcat TYPE slis_t_fieldcat_alv,
wa_fieldcat LIKE LINE OF it_fieldcat,
it_top_of_page TYPE slis_t_listheader,
ls_layout TYPE slis_layout_alv,
gt_events TYPE slis_t_event.
DATA: it_raw TYPE truxs_t_text_data.
DATA: BEGIN OF record,
* data element: BLDAT
bldat_001(010), "Invoice Date
* data element: BLART
blart_002(002), " Doc Type DR or DG if credit
* data element: BUKRS
bukrs_003(004), " Company Code
* data element: BUDAT
budat_004(010), "Posting Date
* data element: MONAT
monat_005(002), "period"
* data element: WAERS
waers_006(005), "Currency
* data element: XBLNR1
xblnr_007(016), "Invoice Number
* data element: BKTXT
bktxt_008(025), "PO number
* data element: SAEOBJART
docid_009(010),
* data element: NEWBS
newbs_010(002), "posting Key
* data element: NEWKO
newko_011(017), "Customer number or GL account
* data element: WRBTR
wrbtr_012(016), "Amount
* data element: DZTERM
zterm_013(004),
* data element: DZBD1T
zbd1t_014(003),
* data element: DZFBDT
zfbdt_015(010),
* data element: DZUONR
zuonr_016(018), "Invoice Number
* data element: SGTXT
sgtxt_017(050), " PO number
* data element: NEWBS
newbs_018(002),
* data element: NEWKO
newko_019(017), "GL Account
* data element: WRBTR
wrbtr_020(016), "Amount
* data element: MWSKZ
mwskz_021(002), "Tax
* data element: DZUONR
zuonr_022(018), "Invoice Number
* data element: SGTXT
sgtxt_023(050), "PO Number
* data element: PRCTR
prctr_024(010), "Profit Center
* data element: WRBTR
wrbtr_025(016), " Amount
* data element: MWSKZ
mwskz_026(002), "Tax
* data element: DZUONR
zuonr_027(018), "Invoice Number
* data element: SGTXT
sgtxt_028(050), "PO Number
* data element: FMORE
fmore_029(001),
* data element: PRCTR
prctr_030(010), "Pr Center
* data element: FWSTE
fwste_01_031(016),
END OF record.
DATA: BEGIN OF it_excel OCCURS 0,
* data element: XBLNR1
xblnr_007(016), "Invoice Number
* data element: BLDAT
bldat_001(010), "Invoice Date
* data element: WRBTR
wrbtr_012(016), "Amount
* data element: WRBTR
wrbtr_025(016), " Tax Amount
* data element: WRBTR
wrbtr_020(016), "Gross Amount
* data element: BLART
blart_002(002), " No of units
* data element: MONAT
monat_005(002), "No of units second test"
* data element: BKTXT
bktxt_008(025), "PO number
* data element: SGTXT
sgtxt_017(050), " PO number
* data element: BUKRS
bukrs_003(004), " Company Code
* data element: BUDAT
budat_004(010), "Posting Date
* budat_004 TYPE string, "Posting Date
* data element: WAERS
waers_006(005), "Currency*
* data element: NEWKO
newko_011(017), "Customer number or GL account
* data element : kunnr
kunnr_019(010), " customer
mwskz(002),
prctr(010),
date(002),
month(002),
** data element: BKTXT
* bktxt_008(025), "PO number
** data element: SAEOBJART
* docid_009(010),
** data element: NEWBS
* newbs_010(002), "posting Key
** data element: DZTERM
* zterm_013(004),
** data element: DZBD1T
* zbd1t_014(003),
** data element: DZFBDT
* zfbdt_015(010),
** data element: DZUONR
* zuonr_016(018), "Invoice Number
** data element: NEWBS
* newbs_018(002),
** data element: NEWKO
* newko_019(017), "GL Account
** data element: MWSKZ
* mwskz_021(002), "Tax
** data element: DZUONR
* zuonr_022(018), "Invoice Number
** data element: SGTXT
* sgtxt_023(050), "PO Number
** data element: PRCTR
* prctr_024(010), "Profit Center
** data element: MWSKZ
* mwskz_026(002), "Tax
** data element: DZUONR
* zuonr_027(018), "Invoice Number
** data element: SGTXT
* sgtxt_028(050), "PO Number
** data element: FMORE
* fmore_029(001),
** data element: PRCTR
* prctr_030(010), "Pr Center
** data element: FWSTE
* fwste_01_031(016),
END OF it_excel.
DATA : BEGIN OF it_bkpf OCCURS 0,
belnr LIKE bkpf-belnr,
budat LIKE bkpf-budat,
bldat LIKE bkpf-bldat,
xblnr LIKE bkpf-xblnr,
bktxt LIKE bkpf-bktxt,
total LIKE bseg-dmbtr,
numdocs TYPE p DECIMALS 0,
END OF it_bkpf,
BEGIN OF it_bseg OCCURS 0,
belnr LIKE bseg-belnr,
dmbtr LIKE bseg-dmbtr,
mwsts LIKE bseg-mwsts,
pswsl LIKE bseg-pswsl,
END OF it_bseg,
BEGIN OF it_final OCCURS 0,
belnr LIKE bkpf-belnr,
budat LIKE bkpf-budat,
bldat LIKE bkpf-bldat,
xblnr LIKE bkpf-xblnr,
bktxt LIKE bkpf-bktxt,
dmbtr LIKE bseg-dmbtr,
mwsts LIKE bseg-mwsts,
pswsl LIKE bseg-pswsl,
END OF it_final.
***** End generated data section ***
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pfile.
PERFORM sub_browse_file. "Get file name
START-OF-SELECTION.
PERFORM sub_data_load. " Transfer excel into internal table.
PERFORM sub_calc_excel.
IF report = 'X'.
* PERFORM data_selection.
* PERFORM data_move.
*********************************GET ALV DATA
PERFORM alv_get_data.
*********************************ALV GRID DATA
PERFORM alv_grid.
ENDIF.
*if report = ''.
* PERFORM write.
* PERFORM open_dataset USING dataset.
PERFORM open_group.
* DO.
* READ DATASET dataset INTO record.
LOOP AT it_excel.
* IF sy-subrc <> 0. EXIT. ENDIF.
PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF05A-NEWKO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BKPF-BLDAT'
it_excel-bldat_001.
PERFORM bdc_field USING 'BKPF-BLART'
'DR'." record-blart_002.
PERFORM bdc_field USING 'BKPF-BUKRS'
it_excel-bukrs_003.
PERFORM bdc_field USING 'BKPF-BUDAT'
it_excel-budat_004.
PERFORM bdc_field USING 'BKPF-MONAT'
'3'. "record-monat_005.
PERFORM bdc_field USING 'BKPF-WAERS'
it_excel-waers_006.
PERFORM bdc_field USING 'BKPF-XBLNR'
it_excel-xblnr_007.
PERFORM bdc_field USING 'BKPF-BKTXT'
it_excel-bktxt_008.
PERFORM bdc_field USING 'FS006-DOCID'
'*' ."record-docid_009.
PERFORM bdc_field USING 'RF05A-NEWBS'
'01'." record-newbs_010.
PERFORM bdc_field USING 'RF05A-NEWKO'
it_excel-kunnr_019 .
PERFORM bdc_dynpro USING 'SAPMF05A' '0301'.
PERFORM bdc_field USING 'BDC_CURSOR'
'RF05A-NEWKO'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BSEG-WRBTR'
it_excel-wrbtr_020." it_excel-wrbtr_012.
PERFORM bdc_field USING 'BSEG-ZTERM'
'NT30' ." record-zterm_013.
PERFORM bdc_field USING 'BSEG-ZBD1T'
'30'."record-zbd1t_014.
PERFORM bdc_field USING 'BSEG-ZFBDT'
it_excel-bldat_001."record-zfbdt_015.
PERFORM bdc_field USING 'BSEG-ZUONR'
it_excel-xblnr_007."record-zuonr_016.
PERFORM bdc_field USING 'BSEG-SGTXT'
it_excel-sgtxt_017.
PERFORM bdc_field USING 'RF05A-NEWBS'
'50'." record-newbs_018.
PERFORM bdc_field USING 'RF05A-NEWKO'
it_excel-newko_011." record-newko_019."Gl account
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BSEG-SGTXT'.
PERFORM bdc_field USING 'BDC_OKCODE'
'/00'.
PERFORM bdc_field USING 'BSEG-WRBTR'
it_excel-wrbtr_012."changes from 12 to 20
PERFORM bdc_field USING 'BSEG-MWSKZ'
it_excel-mwskz." record-mwskz_021.
PERFORM bdc_field USING 'BSEG-ZUONR'
it_excel-xblnr_007." record-zuonr_022.
PERFORM bdc_field USING 'BSEG-SGTXT'
it_excel-sgtxt_017." record-sgtxt_023.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-PRCTR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-PRCTR'
it_excel-prctr ." record-prctr_024.
PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BSEG-WRBTR'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=STER'.
PERFORM bdc_field USING 'BSEG-WRBTR'
it_excel-wrbtr_012." it_excel-wrbtr_025.
PERFORM bdc_field USING 'BSEG-MWSKZ'
it_excel-mwskz.
PERFORM bdc_field USING 'BSEG-ZUONR'
it_excel-xblnr_007." record-zuonr_027.
PERFORM bdc_field USING 'BSEG-SGTXT'
it_excel-sgtxt_017." record-sgtxt_028.
PERFORM bdc_field USING 'DKACB-FMORE'
'X' ."record-fmore_029.
PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
PERFORM bdc_field USING 'BDC_CURSOR'
'COBL-PARGB'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=ENTE'.
PERFORM bdc_field USING 'COBL-PRCTR'
it_excel-prctr." record-prctr_030.
PERFORM bdc_dynpro USING 'SAPLTAX1' '0300'.
PERFORM bdc_field USING 'BDC_CURSOR'
'BSET-FWSTE(01)'.
PERFORM bdc_field USING 'BDC_OKCODE'
'=GOBU'.
PERFORM bdc_field USING 'BSET-FWSTE(01)'
it_excel-wrbtr_025." record-fwste_01_031.
PERFORM bdc_transaction USING 'FB01'.
REFRESH:bdcdata,messtab.
ENDLOOP.
REFRESH:bdcdata.
** PERFORM bdc_dynpro USING 'SAPMF05A' '0100'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'RF05A-NEWKO'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '/00'.
* PERFORM bdc_field USING 'BKPF-BLDAT'
* record-bldat_001.
* PERFORM bdc_field USING 'BKPF-BLART'
* record-blart_002.
* PERFORM bdc_field USING 'BKPF-BUKRS'
* record-bukrs_003.
* PERFORM bdc_field USING 'BKPF-BUDAT'
* record-budat_004.
* PERFORM bdc_field USING 'BKPF-MONAT'
* record-monat_005.
* PERFORM bdc_field USING 'BKPF-WAERS'
* record-waers_006.
* PERFORM bdc_field USING 'BKPF-XBLNR'
* record-xblnr_007.
* PERFORM bdc_field USING 'BKPF-BKTXT'
* record-bktxt_008.
* PERFORM bdc_field USING 'FS006-DOCID'
* record-docid_009.
* PERFORM bdc_field USING 'RF05A-NEWBS'
* record-newbs_010.
* PERFORM bdc_field USING 'RF05A-NEWKO'
* record-newko_011.
* PERFORM bdc_dynpro USING 'SAPMF05A' '0301'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'RF05A-NEWKO'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '/00'.
* PERFORM bdc_field USING 'BSEG-WRBTR'
* record-wrbtr_012.
* PERFORM bdc_field USING 'BSEG-ZTERM'
* record-zterm_013.
* PERFORM bdc_field USING 'BSEG-ZBD1T'
* record-zbd1t_014.
* PERFORM bdc_field USING 'BSEG-ZFBDT'
* record-zfbdt_015.
* PERFORM bdc_field USING 'BSEG-ZUONR'
* record-zuonr_016.
* PERFORM bdc_field USING 'BSEG-SGTXT'
* record-sgtxt_017.
* PERFORM bdc_field USING 'RF05A-NEWBS'
* record-newbs_018.
* PERFORM bdc_field USING 'RF05A-NEWKO'
* record-newko_019.
* PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'BSEG-SGTXT'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '/00'.
* PERFORM bdc_field USING 'BSEG-WRBTR'
* record-wrbtr_020.
* PERFORM bdc_field USING 'BSEG-MWSKZ'
* record-mwskz_021.
* PERFORM bdc_field USING 'BSEG-ZUONR'
* record-zuonr_022.
* PERFORM bdc_field USING 'BSEG-SGTXT'
* record-sgtxt_023.
* PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'COBL-PRCTR'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=ENTE'.
* PERFORM bdc_field USING 'COBL-PRCTR'
* record-prctr_024.
* PERFORM bdc_dynpro USING 'SAPMF05A' '0300'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'BSEG-WRBTR'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=STER'.
* PERFORM bdc_field USING 'BSEG-WRBTR'
* record-wrbtr_025.
* PERFORM bdc_field USING 'BSEG-MWSKZ'
* record-mwskz_026.
* PERFORM bdc_field USING 'BSEG-ZUONR'
* record-zuonr_027.
* PERFORM bdc_field USING 'BSEG-SGTXT'
* record-sgtxt_028.
* PERFORM bdc_field USING 'DKACB-FMORE'
* record-fmore_029.
* PERFORM bdc_dynpro USING 'SAPLKACB' '0002'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'COBL-PARGB'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=ENTE'.
* PERFORM bdc_field USING 'COBL-PRCTR'
* record-prctr_030.
* PERFORM bdc_dynpro USING 'SAPLTAX1' '0300'.
* PERFORM bdc_field USING 'BDC_CURSOR'
* 'BSET-FWSTE(01)'.
* PERFORM bdc_field USING 'BDC_OKCODE'
* '=GOBU'.
* PERFORM bdc_field USING 'BSET-FWSTE(01)'
* record-fwste_01_031.
* PERFORM bdc_transaction USING 'FB01'.
* ENDDO.
PERFORM close_group.
* PERFORM close_dataset USING dataset.
*endif.
*& Form sub_browse_file
* text
* --> p1 text
* <-- p2 text
FORM sub_browse_file .
CALL FUNCTION 'F4_FILENAME'
EXPORTING
program_name = syst-cprog
dynpro_number = syst-dynnr
* FIELD_NAME = ' '
IMPORTING
file_name = pfile.
ENDFORM. " sub_browse_file
*& Form sub_data_load
* text
* --> p1 text
* <-- p2 text
FORM sub_data_load .
CALL FUNCTION 'TEXT_CONVERT_XLS_TO_SAP'
EXPORTING
* I_FIELD_SEPERATOR =
i_line_header = 'X'
i_tab_raw_data = it_raw
i_filename = pfile
TABLES
i_tab_converted_data = it_excel[]
* EXCEPTIONS
* CONVERSION_FAILED = 1
* OTHERS = 2
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " sub_data_load
**& Form data_selection
** text
** --> p1 text
** <-- p2 text
*FORM data_selection .
* SELECT * FROM bkpf
* INTO CORRESPONDING FIELDS OF TABLE it_bkpf
* WHERE budat = p_budat AND
* bukrs = p_bukrs.
* IF NOT it_bkpf[] IS INITIAL.
* SELECT belnr dmbtr mwsts pswsl
* FROM bseg INTO TABLE it_bseg
* FOR ALL ENTRIES IN it_bkpf
* WHERE belnr = it_bkpf-belnr AND
* kunnr = p_kunnr AND
* hkont = p_hkont AND
* pswsl = p_waers.
* ENDIF.
*ENDFORM. " data_selection
**& Form data_move
** text
** --> p1 text
** <-- p2 text
*FORM data_move.
* SORT : it_bseg BY belnr,
* it_bkpf BY belnr.
* LOOP AT it_bseg.
* it_final-dmbtr = it_bseg-dmbtr.
* it_final-belnr = it_bseg-belnr.
* it_final-mwsts = it_bseg-mwsts.
* it_final-pswsl = it_bseg-pswsl.
* READ TABLE it_bkpf WITH KEY belnr = it_bseg-belnr BINARY SEARCH.
* IF sy-subrc = 0.
* it_final-budat = it_bkpf-budat.
* it_final-bldat = it_bkpf-bldat.
* it_final-xblnr = it_bkpf-xblnr.
* it_final-bktxt = it_bkpf-bktxt.
* ENDIF.
* APPEND it_final.
* CLEAR it_final.
* ENDLOOP.
*ENDFORM. " data_move
*& Form alv_get_data
* text
* --> p1 text
* <-- p2 text
FORM alv_get_data .
CLEAR it_fieldcat.
***************** Document number
* wa_fieldcat-col_pos = '1'. " ALV O/P COL-1
wa_fieldcat-fieldname = 'XBLNR_007'.
wa_fieldcat-seltext_m = 'Document number'.
wa_fieldcat-just = 'L'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 15.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
***************** Posting Date
* wa_fieldcat-col_pos = '2'. " ALV O/P COL-1
wa_fieldcat-fieldname = 'BUDAT_004'.
wa_fieldcat-seltext_m = 'Posting Date'.
wa_fieldcat-just = 'L'.
wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 20.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
******************** Document Date
* wa_fieldcat-col_pos = '3'. " ALV O/P COL-2
wa_fieldcat-fieldname = 'BLDAT_001'.
wa_fieldcat-seltext_m = 'Document Date'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'IT_EXCEL'.
wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
********************* REFERENCE DOCUMENT
** wa_fieldcat-col_pos = '4'. " ALV O/P COL-2
* wa_fieldcat-fieldname = 'XBLNR'.
* wa_fieldcat-seltext_m = 'REFERENCE DOCUMENT'.
* wa_fieldcat-just = 'L'.
* wa_fieldcat-tabname = 'IT_EXCEL'.
** wa_fieldcat-outputlen = 15.
* APPEND wa_fieldcat TO it_fieldcat.
* CLEAR wa_fieldcat.
***************** DOCUMENT HEADER TEXT
* wa_fieldcat-col_pos = '5'. " ALV O/P COL-3
wa_fieldcat-fieldname = 'SGTXT_017'.
wa_fieldcat-seltext_m = 'DOCUMENT HEADER TEXT'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'IT_EXCEL'.
* wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*******************Invoice Net amount
* wa_fieldcat-col_pos = '6'. " ALV O/P COL-4
wa_fieldcat-fieldname = 'WRBTR_012'.
wa_fieldcat-seltext_m = 'Invoice Net amount'.
wa_fieldcat-just = 'L'.
wa_fieldcat-tabname = 'IT_EXCEL'.
* wa_fieldcat-outputlen = 15.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** Tax Amount
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'WRBTR_025'.
wa_fieldcat-seltext_m = 'Tax Amount'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** NEt Amount
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'WRBTR_020'.
wa_fieldcat-seltext_m = 'Net Amount'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
*********** General ledger currency
* wa_fieldcat-col_pos = '7'. " ALV O/P COL-5
wa_fieldcat-fieldname = 'WAERS_006'.
wa_fieldcat-seltext_l = 'General ledger currency'.
wa_fieldcat-just = 'L'.
* wa_fieldcat-no_zero(1) = 'X'.
wa_fieldcat-outputlen = 25.
wa_fieldcat-tabname = 'IT_EXCEL'.
APPEND wa_fieldcat TO it_fieldcat.
CLEAR wa_fieldcat.
ENDFORM. " alv_get_data
*& Form alv_grid
* text
* --> p1 text
* <-- p2 text
FORM alv_grid .
* PERFORM fill_list_header USING it_top_of_page[].
* PERFORM event-build USING gt_events[].
PERFORM fill_layout USING ls_layout.
MESSAGE 'Please press F3 to generate a session or call transaction method after getting report!' TYPE 'I'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = sy-repid
is_layout = ls_layout
it_fieldcat = it_fieldcat
it_events = gt_events[]
i_save = 'A'
TABLES
t_outtab = it_excel
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " alv_grid
* FORM FILL_LAYOUT *
FORM fill_layout USING p_ls_layout TYPE slis_layout_alv.
p_ls_layout-zebra = 'X'.
p_ls_layout-cell_merge = 'X'.
ENDFORM. "fill_layout
*& Form sub_calc_excel
* text
* --> p1 text
* <-- p2 text
FORM sub_calc_excel .
data: idate TYPE sy-datum,
tdat8 type string.
LOOP AT it_excel.
CONCATENATE it_excel-blart_002 '/' it_excel-monat_005 '/' it_excel-bktxt_008 INTO
it_excel-sgtxt_017.
it_excel-bukrs_003 = p_bukrs.
* it_excel-budat_004 = p_budat.
it_excel-waers_006 = p_waers.
it_excel-newko_011 = p_hkont.
it_excel-kunnr_019 = p_kunnr.
it_excel-mwskz = p_mwskz.
it_excel-prctr = p_prctr.
idate = p_budat.
CALL FUNCTION 'DATUMSAUFBEREITUNG'
EXPORTING
* FLAGM = ' '
* FLAGW = ' '
IDATE = idate
* IMONT = ' '
* IWEEK = ' '
IMPORTING
* MDAT4 =
* MDAT6 =
* TDAT4 =
* TDAT6 =
TDAT8 = tdat8
* WDAT4 =
* WDAT6 =
* EXCEPTIONS
* DATFM_UNGUELTIG = 1
* DATUM_UNGUELTIG = 2
* OTHERS = 3
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
it_excel-budat_004 = tdat8.
* CONCATENATE it_excel-budat_004+4(2) '/' it_excel-budat_004+6(2) '/' it_excel-budat_004+0(4)
* INTO it_excel-budat_004.
* SPLIT it_excel-bldat_001 AT '/' INTO it_excel-month it_excel-date.
* CONCATENATE it_excel-date '.' it_excel-month '.' it_excel-bldat_001+6(4) INTO it_excel-bldat_001.
MODIFY it_excel.
CLEAR it_excel.
ENDLOOP.
ENDFORM. " sub_calc_excel
*& Form write
* text
* --> p1 text
* <-- p2 text
*form write .
*OPEN DATASET dataset FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
*data: wa_excel like line of it_excel.
*loop at it_excel into wa_excel.
*TRANSFER wa_excel to dataset.
*endloop.
*CLOSE DATASETdataset.
*endform. " write -
How can I see ALL transaction history in my account. Specifically, I want to review the gift cards I have redeemed but the amounts are not showing up in my account. I know I have over $200 in my account and I am unable to access it. The site wants me to pay by credit card and I don't want to do that. Any ideas how I can recover the money in my account?
You can only view your account's purchase history, you can't view a history of card redemptions.
My account's balance shows at the top left of the store's page on my computer's iTunes, and by logging in to view my account via the Store > View Account menu option. On my iOS devices it shows at the bottom of, for example, the Featured tab in the App Store app under my account id (or you can view your account via Settings > iTunes & App Stores and it should show on the screen that you are taken to).
To view your purchase history : log into your account on your computer's iTunes via the Store > View Account menu option, you should then see a Purchase History section with a 'see all' link to the right of it. Click on that and you should then see a list of your purchases.
You've tried logging out and back into your account to see if your balance then shows ? If not, and you can't see where it might have been spent, then you could try contacting iTunes Support and see if they can help : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption -
The transaction log for database 'Test_db' is full due to 'LOG_BACKUP'
My dear All,
Came up with another issue:
App team is pushing the data from one Prod1 server 'test_1db' to another Prod2 server 'User_db' through a job, here while pushing the data after some duration job is failing and throwing the following error
'Error: 9002, Severity: 17, State: 2.'The transaction log for database 'User_db' is full due to 'LOG_BACKUP'''.
On Prod2 server 'User_db' log is having enough space 400gb on drive and growth is 250mb. I really confused that why job is failing as there is lot of space available. Kindly guide me to troubleshoot the issue as this issue is occuring from more than
1 week. Kindly refer the screenshot for the same.
Environment: SQL Server 2012 with sp1 Ent-edition. and log backup duration is every 15 mints and there is no High availability between the servers.
Note: Changing to simple recovery model may resolve but App team is required to run in Full recovery model as they need of log backups.
Thanks in advance,
Nagesh
NageshDear V,
Thanks for the susggestions.
I have followed some steps to resolve the issue, as of now my jobs are working without issue.
Steps:
Generating log backup for every 5 minutes
Increased the growth 500mb to unrestricted.
Once whole job completed we are shrinking the log file.
Nagesh -
Hi , We are in 11.5.10.2, recently, one of our OU was sold but still we have given the option to use our system for 6 months inorder to support their business. Now, we dont want those receivables transactions to be posted to out company accounts.
How to handle this situation in oracle now.How To: Direct Message and ArnettH_VZW
-
You want to know the amount of space the transaction log for the Customer database is using. Which T-SQL command would you use?
Forced me to do a little research.
DBCC SQLPERF(logspace)
See also
http://stackoverflow.com/questions/198343/how-can-i-get-the-size-of-the-transaction-log-in-sql-2005-programmatically
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles
Maybe you are looking for
-
In Mac OS 10.6, why won't the command n keyboard shortcut open a new firefox window?
Ever since Firefox 3, command n does not open up a new window. I'm on a Mac, OS 10.6
-
Using the same Asset Master Record for similar assets
Dear all, I would like to ask if it is possible to use the same asset master record for multiple assets which are similar. The assets will be posted in different periods / fiscal years and therefore the depreciation would change and be charged accord
-
How to migrate custom mappings ,workflok and DAC
Hi Experts, we are moving to 7.9.6.1 to 7.9.6.2 for siebel Sales Applications. We do have custom mappings and workflow as well as we have some custom Dac objects. Can any one provide me the related documents Reagrds, Ml Edited by: user10675696 on Sep
-
Hold down dock icon - show windows
With Snow Leopard, I used to be able to hold down an icon on the dock (where multiple windows were open for the same app), and it would show all of the various pieces of that app I had open. With Lion you have to click and select open all Windows Ex
-
Can't use Bangla font in anti-alias "anti-alias for animation"....help needed!
Hi, the problem I am having with adobe flash pro cs6 is that I am trying to use Bangla font in flash. Although the font shows up but in anti-alias "anti-alias for animation" mode, the fonts become all scattered and disordered. But when I switch to "u