Transaction Iview - Screen not opening porperly

Hi All,
I have created a transaction iview, but somehow screens are not opening properly.
I am getting below screen, have i missing anything.
Thanks In Advance,
P$G

Hi,
It looks like the application was written to run on old IE versions (quirks mode).
Therefore the application will break when the new browser of IE or chrome/firefox render it.
To verify that, you can use an old IE version (e.g. IE7) to run this application and check it it looks o.k.
if so, the application needs to be rewritten in order to suite for new browsers (standards) or to use X-UA-Compatible to inform the IE browser that he should enulate IE7.
BR,
Nadav.

Similar Messages

  • Transactional Iviews are not showing ( with out super admin role assigned )

    Please any solutions for the fallowing.
    First Problem
    I am not able to create the user from portal directly. Its showing the fallowing error.
    An error occurred in the persistence; contact your system administrator.
    so i had created the users in WAS by SU01.
    Second
    We have some users at production server ( Assume 5 users ). and those users need to be mapped at portal. So that those users can directly enter into portal and operate on SAP system .
    If u dont mine Please provide with me the steps to fallow
    Third
    i had created some transactional Iviews that are working fine when i am log in with Administrator( super administrator role). The problem is that the reports are not showing when i am log in with general user ( with out super administrator role ) .
    Its showing the error
    Could not able to look up the system.
    And the problem with user mapping also .
    For aministrator its working fine .and for a general end user ( created on WAS )
    i am not able to provide user mapping. Its showing
    There are no systems available for user mapping for the selected principal
    wat could be the problem ?
    Your solutions will be appreciated .please urgent

    Hi Pratap,
    Second Problem
    If the Portal user name and R/3 user are the same then no problem other wise you have to do user mapping
    Third Problem
    Check the permissions. Right click the system object and give permissions for all
    Create an alias for the system object for doing user mapping
    First Problem
    Try creating user from http://<portalserver>:50000/useradmin
    Regards
    Arun

  • URL Iview is not open a new Window in FireFox

    Hi Guys,
    After we upgrade our portal to NW 7.0 EHp2 SP6 , we can not open the URL Iviews in Firefox.
    It looks like can't force the iview to open a new window and instead it open a new tab , Any suggestion?
    Thanks,

    Hi Mar,
    To me, the PAM mentioned Firefox 3.5 is not recommended for NW 7.0 Ehp2 - Firefox 3.6 is supported for NW 7.0 Ehp2 starting with SPS6.
    Anyway, if it works in IE & Safari, I don't think it has anything to do with the portal; it's something in Firefox settings.  As mentioned before, did you check the option to open new links in new windows? Also, please checkSAP Note 1296463 and its related notes about browsers to see if there's something relevant to your case.
    Regards,
    Dao

  • Webdyn pro ABAP iview is not opening in Internet

    Hi All,
    I Have one webdyn pro ABAP iview it's working fine in LAN. but same iview is not working in internet.
    we are using https protocol in Internet and in LAN http protocol.
    When clicks the Iview one alert message is populating and  showing secure and non-secure message . when I clicks Yes and No its showing page not found error.
    But is working in LAN using http protocol.
    is it require any parametators need to be change?
    Thanks
    Polaka
    Edited by: polaka123 on May 18, 2011 1:14 PM

    Noe its working..
    Changed System property Web as protocol to Http.
    Previously it is Https.
    Thanks
    Polaka

  • Help screen not opening when start

    plz help guys everday when i start opening my gt72 2qe laptop the screen is black  and everthing is running all is running  but the screen is not  then i start to shake the display somtimes and turning on and off the laptop several times it goes normal  at last but this happens everyday when i start opening the laptop  helpl plz 

    If the display is normal when you connect to another monitor ,you can check whether the LCD cable loosing or not .

  • Parameter Screen not opening - '500 Internal Server Error'

    Hi All,
    I have developed a Discoverer Report which runs based on certian parameters.
    When i run the report in Discoverer Viewer at my end the parameter screen opens fine with no errors, but when the customer clicks on the flashlight then instead of the parameter screen getting displayed there is some java error displayed which says '500 Internal Server Error'.
    Can anyone please tell me why is this error coming at the customer's end and what could be the root cause for this.
    Regards,
    Shruti

    Hi Shruti
    Can you tell me the URL you are using to launch Discoverer?
    Discoverer typically likes to call its pages using a fully qualified domain name like: http://myserver.mydomain.com:port/discoverer/plus
    If you are not launching it this way and are using just a server name or an IP address then the initial pages will work but later the server will try to call a fully qualified page from a non-qualified page. This can cause a 500 Internal Server Error.
    So, please make sure you are launching Discoverer correctly.
    Best wishes
    Michael

  • Transaction ME23N is not opening in a new session of ERP system

    Hi,
    In Solution manager, tcode -> STWB_2 (Test Plan Management - Test Organizer), when i select test plan and click on "Test Packages", then it will take me into the Test plan.
    Here I will select one of the packages and click on status analysis, in the Status analysis screen when i try to Execute and anything (for example here Display Purchase Order),
    I am getting a message as "Transaction ME23N will be started in a new session in ERP", however no such thing is happening.
    All RFCs are working fine, i tested in both Solman and ERP system.
    Can anyone help me out in solving this issue.
    Thank you,
    Siv

    Hi
    Do you have an RFC with current user settings with Trusted one.
    also do your user id has S_RFC authorization object so that you can do remote logon.
    goto sm59 in solman and choose the RFC pointing towards ECC etc and perform remote logon
    Hope it helps and solv ur problem
    Regards
    Prakhar
    Edited by: Prakhar Saxena on Aug 20, 2010 2:01 AM

  • Display Taxes screen not opening in Purchase Order

    Respected forum gurus!!!
    Please help me.  I am having a peculiar issue in the case of calculating excise only.
    However before I go on, here are some of the details you might find relevant:
    1. Tax Procedure: INJ
    2.  R/3 system: 4.7
    The issue is that I am not able to launch my 'display taxes' screen while making a PO without entering data in  the following condition types.  Also the system is not fetching the excise taxes.  The particular conditions are:
    1.  IN A/P BED deductib             Condition Type: JM01
    2.  IN A/P AED deductib             Condition Type: JA01
    3.  IN A/P SED deductib              Condition Type: JS01.
    I have maintained the taxes as:
    1. 10% @ Condition Type JMOP (IN: BED set off) & 100% @ Condition type JMOQ (IN: BED set off quantity)
    2. 2% @ Condition Type   JAOP (IN: AED set off) & 100% @ Condition type JAOQ (IN: AED set off quantity)
    3. 1% @ Condition Type  JSOP (IN: SED set off) & 100% @ Condition type JSOQ (IN: SED set off quantity)
    I am not able to understand why is this happening?  Seeking help, gurus!!!!
    Jaideep

    >
    Piyush Mishra wrote:
    > JMOP,JAOP.... conditions are normally used in TAXINN procedure. Conditions JM01,JA01 etc are for TAXINJ.
    > Check the tax code which you are using in PO.
    > Check whether excise rates are maintained in FTXP or not?
    >
    >
    > Regards,
    > Piyush
    Respected Sir,
    Excise rates have been maintained through FTXP itself, properly for the conditions cited before hand.  Taxes are not calculating as they supposed to be!!!  Even the display taxes box only appears when I enter data in JM01, JA01, JS01!!!
    Please help sir......
    Jaideep

  • Log & Capture Screen not opening and Final Cut Pro just quits! HELP!

    Hi everyone,
    I've been searching through the forums and reading up on similar issues but to no avail my problem still exists and I'm about to put a hammer to my computer. I have a G5 Mac at work and use my G4 for home use. Earlier today I was at work and was capturing my footage perfect using my Canon XH A1 using firewire and everything went well. Later on in the day when working on my G4, using the same settings and equipment from earlier, when I hit apple+8 it shows that the program is understanding my command but after a min without a screen appearing, final cut pro just quits. Now I've tried everything from deleting my preferences, final cut user data, you name it and I've tried yet still not able to get the screen to capture. I've even tried switching the firewire port just in case its a bad connection and still nothing. Can someone help me out so my computer can live to see another day.
    Thank You
    Message was edited by: Jason81

    You updated to 10.5?
    What FCP 5 version are you running -5.0 or 5.1?
    You need 5.1 if you have Mac OS X 10.5.
    Also, get rid of the Norton AV -it's a terrible resource hog and interferes with everything.
    I would go as far as to suggest Norton is trying to check the incoming data from your video capture.
    Turn it off at least, and see if there is any improvement.
    If you must use AV to avoid passing something to Windows users, get a free copy of ClamXav. It can be set to check only incoming stuff like Mail and downloads. Has a very small footprint and is only active when it should be. I use ClamXav myself as I often deal with FTP transfers.

  • I erase my data inside iphone in 3gs after that screen not open

    I erase and restore the data inside my Iphone 3gs and it show atleast 2 hours to reboot by themself i waited it erase and finally it cant able to reboot. The symbol from able is always showing and my iphone can able to open front screen. i think the soft ware was corrupted

    You may try resetting the phone. Hold down the sleep/wake button and home button wait until you see an apple logo then release and after a couple of seconds your iPhone's home screen should comes up

  • Match Frame screen not opening

    Learning to Edit properly.
    I've always used dragging to make every cut.
    This because I only create very short movies and AE is my main program.
    However, After 15 years it's time to learn NLE functions.
    EDIT: I made a mistake, the function I need isn't called Match Frame but Trim.
    I'll keep the old message below, until I solved all questions regarding the keyboard shortcuts.
    I want to:
    A. Select a clip on a track.
    B. Make it longer at the end using the keyboard.
    C. Prevent all other tracks from changing/moving in any way.
    I couldn't find that function using the keyboard.
    But after pressing F, I got the Match frame function.
    This worked fine and did exactly what I needed.
    1. It  now can't be activated again. Is the function bugged or am I doing it wrong?
    2. Can it be done using the keyboard?

    Is there a key to select the clip under the indicator?
    not that i know of. no. just click on it.
    faster alternative:
    -doubleclick clip to load to source monitor
    -play and hit "i" at desired in-point and "o" ate desired out-point
    -overwrite (".") or insert(",") edit clip into sequence (into activated tracks) [at current indicator)
    ...quicker
    also there is no need for the clip to be selected to make the cut with Ctr.+K, the track has to be active.
    - Press ctrl K to make a cut at the in point
    - Press shift delete to ripple away the stuff before the in point and keep the timeline gap free at all times.
    you can also assign shortcuts to:
    Ripple Trim Next Edit to Playhead
    Ripple Trim Previous Edit to Playhead
    - i have them at Shift+K
       and AltGr(Ctrl+Alt)+K
    i often use those when editing on the fly on the timeline...
    if interested, read this:
    http://helpx.adobe.com/premiere-pro/using/trimming-clips1.html
    for a deeper info on how to trim, ripple edit, slip&slide, use trim mode etc.
    also note, that until 5.5 (i think) it was called "current-time indicator" (CTI), they now call it "playhead", but i think not everywhere in the shortcuts and help-files, but they both mean the same thing...

  • EP content transport : Transaction Iviews not coming up....All others ok

    Dear all
    We have made a transport package to move content from dev to QA. All the iviews, roles, worksets are coming up fine in the QA server but for some strange reason, transaction Iviews are not coming up and an "yellow icon" indicating "link not available" is coming up .
    while transporting no errors were thrown and it showed zero errors.
    Kindly let me know if any one encountered such a error during transport.
    Regards
    Jayesh

    The related template on which the transaction iview was based was not present. Once corrected everything went fine
    Regards
    Jayesh

  • External Facing Portal with access to ITS via Transaction Iview

    Hi Experts,
    We have a requirement to make the portal available externally for third party vendors to access ECC transactions.  We have configured a URL with a reverse proxy to the portal server.  Portal loads fine from outside the network, but when launching a transaction I-view, a page cannot be displayed error comes up in IE-8 and Chrome says it cannot access the ECC server. 
    I've searched the forums and come up with a couple of tips, but that brings on a couple more questions. 
    It seems you can direct traffic from external URL to portal server:port, but when launching an transaction I-view, it needs to be redirected again to the ECC server:port/sap/bc/gui* (or something like that for SICF GUI service).  Question here is, once this redirect happens, technically the ECC box is now available externally vs. only the portal?  Is this recommended?
    Other option I've found is to try and use IAC I-views instead.  Is this really much different than a transaction i-view in how portal handles the opening Iframe?  Does it allow backend connectios without rerouting internet traffic to the backend server?
    Are they any other options to make this type of setup work for external facing portals using transaction iviews to access ITS?
    Thanks for the help!

    Hi
    Did you able to resolve the issue. We have installed Web Dispatcher through we are able to call the EP but when calling the transaction iViews page not found error pops up, since from EP server request to ECC goes via the URL http://<ecchost.domain>.:8000/sap/bc/gui/sap/its/webgui?sap-client=100.
    Thanks
    Murthy

  • How to hide the menu bar from a Transaction iView (SAP GUI for HTML).

    Hello all,
    I have created a simple SAP Transaction iView of type SAP GUI for HTML.  This iView has the Menu bar that has the buttons: Menu, Back, Cancel, and System.  My requirement is, I dont want to see the menu bar that has these buttons.  How do I go about it?  Please advice.
    Note:  My iView is a SAP Transaction iView and not IAC service related iView. 
    Thanks
    Vicky R.

    You'll want to set the parameter ~webgui_simple_toolbar in your webgui service.
    It is a binary parameter with the following values/options:
    0  : Hiding the page header completely (not recommended)
    1  : Standard setting
                        This is the recommended standard setting in which the title and the menu bar below it with the [Exit] and [Help] button and the application buttons are displayed.
    2  : Displaying the title line
    4  : Displaying the buttons [Exit] and [Help]
    8  : Displaying the active system buttons on the screen ([Back] and [Cancel])
    16  : Displaying the system menu
    32  : Displaying the application buttons
    128 : Deactivating the information block in the status bar (new)

  • Transaction iView always calls SESSION_MANAGER

    Hi all,
    we are working with Transaction iViews in our portal to call transactions in backend system via ITS.
    A few days ago everything worked fine for me, but now the transaction iViews do not call the transaction any more. They just call the start screen (TA SESSION_MANAGER) no matter which transaction should be called.
    I compared the iView with the iVews in other EPs, which are working fine. There is no difference.
    Even if I create a new transaction iView with the wizard its not working.
    Tried to de- and reactivate the webgui service in SICF of backend system but no change.
    Has anyone faced similar issues?
    Best regards
    Davor

    Hi Davor,
    You need to check DSM and deactivate in portal.
    Please go through thread [Disable DSM Terminator   |Re: Disable DSM Terminator;
    Regards,
    Arun

Maybe you are looking for