Transaction RERAPP - Reconcil.acct is missing in master record; correct mas

Hi gys.
I have problems during the execution of the transaction RERAPP.
Occurs the following message:
Reconcil.acct is missing in master record; correct master record
Message no. F5144
What it´s this master record that is informed?
Tks
Lucas

The solution is maintaining  Reconciliation account in master data:
Using master data  T codes FK02(Vendor) FD02(Customer), in the account management section you can enter the reconciliation account for above master records for the Business partner used in your RERAPP run.
Permanent solution is,
T code: RECACUST- this is customization T code for RE-FX
in this follow the below path:
1. Business Partner->Relevant Settings for Business Partner in RE context->Business Partner customer->
->Standard values for automatic creation of Customers (Company code-Dependent).
Here for Product Type IMV, maintain your company code and fill Reconciliation Account with Customer master reconciliation account.
The details maintained here are used by the system whenever you are creating master tenant in the
RECN transaction for the creation of Customer in the background.
2. Path: Business Partner->Relevant Settings for Business Partner in RE context->BP Roles->Configure field attributes for BP roles
Make Reconciliation account for your BP Role mandatory field.
So that in case if you create BP Role master tenant (Using BP T code), system shows error and forces user to maintain that.
Regards,
Bala.

Similar Messages

  • Reconcil. acct is missing in master record, correct master record

    Dear Experts,
    i created the intercompany billing document.
    but it has not generated any accounting document.
    it is giving the error Reconcil. acct is missing in master record, correct master record.
    In my customer master record i have filled up reconcil acct.
    and now if i want to made any changes in that i am not able to do that.
    so now what can be the alternate solution for that.

    hello, friend.
    you mentioned that the field for recon account (company code view) has been greyed out in change mode?  it is possible your FI has set this field as display only (text control) while in change mode.  please check with your FI consultant and if so, the field should be made modifiable so you can make changes.
    if this is not possible, then cancelling the intercompany transaction becomes a likely option.
    please post feedback again.

  • Recon. account is  missing in master record ; correct master record

    Hi,
    When i tried to book a bill in tcode MIRO , the following error message  is coming.
    Recon. account is  missing in master record ; correct mastwer record  
    Message no. F5144.
    I checked for particular vendor in xk03 ( accounting information ) , Recon. account field is blank..
    How to rectify this problem..
    What will be the consequences if i assigned rec . account now.
    Thanks & regards,
    Hari priya
    Edited by: Hari  Priya on Dec 16, 2008 6:19 AM

    Hi
    1. use tcode XK02 and maintain reconcillation account
    ( based on this company will come to know what is totoal liabilitties to the all vendors)
    2. then proceed furhter steps
    Raju

  • House bank ID and acct ID are missing in mast.record for acct...

    Dear SAP Gurus,
    Please help out in the error that I am having here in FBWD for clearing accounts.
    I made payment with F110 for Bill of Exchange and Now I want to clear the amounts.
    1,

    Dear SAP Gurus,
    Please help out in the error that I am having here in FBWD for clearing accounts.
    I made payment with F110 for Bill of Exchange and Now I want to clear the amounts.
    1, How can I clear these amounts after payment with F110.
    2, what are the other ways to clear the amounts apart from FBWD.
    3, Error (1), the error that I am getting while trying to visualize the values with the account which is assigned to the house bank "House bank ID and acct ID are missing in mast.record for acct 11301246" Message no. FW024.
                                               though the house bank and ID exists in the system and accounts are assigned in the area OBVCU (FBZP) at "Bank Accounts" area. except the account the DISCOUNT ACCOUNT (G/L A/C is assigned)  in the FI12 at Bank accounts area.
    4, Error (2),  Retd bills exch. acct missing for house bank acct BBVA1 BBVAC (house bank &ID) and pyt method.
                       system response is : Bills of exchange is imported but excluded for further processing.
    thanks in advance,
    Yella Reddy

  • Acct for acct determ.01001/000(chart of accts PR01) missing

    Hi,
    i did FI - MM integration, tht time i try to post RAW MATERIAL CONSUMPTION (MB1A), tht time i got this error "Acct for acct determ.01001/000(chart of accts PR01) missing" PR01 is my company code name, and i try to make payment against vendor , tht time also i got this same error, how can i c=solve this issue ?
    Prince

    Hi:
             In Document splitting functionality please check the Business Transaction Variant 000 to the item category 01001. Check the Classify Document Types for document splitting in SPRO...Financial Accounting....GL....Business Transactions....Document Splitting & check the document type AB (or the doc type through which MB1A doc gets posted) & kindly check which business transaction variant is assigned... Hope this will help you.
    Regards

  • How to delete a master record with transaction data?

    Hi,
        Iam able to delete master record(GL/Vendor/Customer)through OBR2 when there is no transaction data in those respective master records. Despite of clearing all open items in a particular vendor Account, Iam unable to delete that master record. Please suggest me how we can delete vendor master data having transactional data.
                               Thanks in Advance
    Regards,
    Satish

    Hi...
    Not sure whether this helps....you can mark the vendorrecord for deletion and later try to delete it.
    Logistics >> Materials management >> Purchasing >>
    (new menu) Master data >> Vendor >> Central >> Flag for deletion
    try using XK06/FK06
    Assign points if useful
    Regards
    Aravind

  • Missing Purchasing Organization on Vendor master record

    We have a vendor(s) that was created without a purchasing organization.
    Is there a way to update the Purchasing Organization on a vendor master record if the purchasing organization field was left blank when the vendor was orignally created?
    What are the ramifications of creating some vendors with a purchasing organization and others without?

    Will,
    You will need to extend the vendor to the purchasing org. using MK01 or XK01. The vendor master can be maintained centrally (XK01) or purchasing data (MK01) and accounting data (FK01) can be maintained independently. That is the reason SAP has provided 3 separate transactions.
    If you need to use the vendor for purchasing functions (eg. create a PO), then the prerequiste is that you will need to maintain the vendor for all valid purchasing organizations. There are no other ramifications as such.
    Hope this helps.
    H Narayan

  • Transactions that reconcile sales between FI and CO

    Hi,
    Is there any transaction that reconcile sales between FI and CO?
    Thanks,
    Stanislas

    try...
    FAGLCOFIFLUP - Post CO Documents to FI
    KEAT
    KEAW

  • Missing Field error when modifying user Master Record

    We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
    Is there a way to have the portal ignore incomplete records and just save what it has?
    Thanks
    Ken Burd

    We are using our corporate LDAP to authenticate our portal users and do not have (nor do we want) write permission to the LDAP. We are using additional attributes (ume.admin.addattrs) to hold information pertinent to the portal. We are running into a problem though when required information is missing from the LDAP user master record. For example, if the users email address is missing, when we attempt to save a user's record with the additional attributes we need, the system responds with a "Missing Field" error message and will not save the additional attribute until the LDAP record is complete. Currently the only work around to this problem is to notify the LDAP administrators and have them update the record (not a high priority for them).
    Is there a way to have the portal ignore incomplete records and just save what it has?
    Thanks
    Ken Burd

  • How to determine which photos in library are missing their master images

    I recently consolidated referenced images into my library. It said some of those images were missing the masters. How do I figure out which ones are missing the master images?

    You can do a filter on your library with "File Status" is "Missing". The "File Status" query is not available by default, but you can add it by clicking the upper-right button in the filter window.
    nathan

  • RE-FX - Transaction RERAPP - No cash flow planned records found in selected

    Hi everybody.
    I am running the transaction RERAPP - periodic posting: contracts, and the following message is returned:
    No cash flow planned records found in selected period
    Message no. RERAPP012
    Someone knows how to solve?
    Thank you.
    Lucas

    Hi Lucas,
    The following are the reasons for the message.
    1. In the Terms tab of RECN, next to contract start date you can find a field called "Cash flow start date", Check whether it is start date of the contract or not, as based on that date system generates(plans) cash flow which gets posted by RERAPP.
    2. In the RERAPP screen due date field by default shows <= symbol, means any cash flow planned before or on the date given should be posted. So, check your RERAPP Run's Due date and Green color symbol next to it, and enter contract end date there to see cash flow.
    3. In some cases i observed that if you reverse your RERAPP postings and try to rerun RERAPP with modified condition amount, system showing the above message, so in this case we need to regenerate the cash flow using the regenerate cash flow Transaction code available in RE-FX> Tools> Cash flow regenerate for the given period, then need to execute RERAPP as explained above.
    Regards,
    Bala.

  • FI-AA and the Automatic Creation of Equipment Master Records

    Our client is currently on SAP R/3 4.7E and per SAP Notes 176056, 370884, 361520, releases above 4.6B should be able to automatically create an equipment resord master record from within FI-AA.  Configuration shows that undaer FI-AA Master Data the integration should be possible, but we have tested and cannot get it to work.  No equipment record is ever created. 
    Has anyone been successful in performing this function?
    What are we missing?
    Thank You.
    Ruthie

    Hi,
    Simple,
    1. Go to AOLK and check which tab layout is assigned to your asset class, to transaction group 'Others'.
    2. Go to AOLA select layout you found out at 1st step, then double click on 'Tab Page Titles'.
    3. Select tab page Allocations and click on position group on tab pages.
    4. Click on new entries and insert 'S0013', save.
    after doing this you will be able to find 'equipment' box under allocation.
    and regarding asset synchronization..
    Asset Accounting --> Master Data --> Automatic Creation of Equipment Master -> Specify Conditions for Synchronization of Master Data
    In this step, under the box 'Edit Asset Master Record' mention,
    Create Equipment                 2 Direct Synchronization after saving
    Change Equipment               2 Direct Synchronization after saving
    Make sure you do not have any other field 'required' in equipment creation and not assigned to asset field.
    After doing this you should be able to get equipment created automatically..
    Regards,
    Sayujya

  • Create Vendor Master Record from HR Master Record

    Hi All,
    I am running PRAA Transaction Code, While running I am getting this Error.
    Employee for whom a vendor master record already exists.
    Personnel Number missing in company code segment.
    Then I went to SM35 but did not found any batch.
    Please can anyone explain the entire process.
    Thanks and Regards
    Ravi Narayan Padhi
    Edited by: Ravi Narayan Padhi on Jan 11, 2012 11:45 AM

    Hello
    In the report RPRAPA00, there is parameter ' 'Create new company code segment for existing vendor master records' as a checkbox under the 'Initial setup' maintenance mode, and it offers you the following option:
    If there is a vendor master record already available for a predefined personnel number, but it does not have a company code segment for the company code in which the employee is situated for the key date entered,then program RPRAPA00 supplements the vendor master record with the required company code segment.
    In your case, the company code already exist, so it will not create or add a new one with this option.
    This only works for "First creation" and not for updating. You need to use "update" or "change" in the setting to do this.
    Thanks and Kind Regards
    Ramana

  • FK01: Vendor Master Record Validation Table is not maintained

    Hi Experts,
    Appreciate your help on this matter: I have created a new Vendor Account Group and tried to used it. However, upon saving I encountered problem: error message Vendor Master Record Validation Table is not maintained. Do I missed some configuration?
    Thank you very much!

    Hi,
    STEP 3 : In Financial accounting > A/R A/P > Business Transactions > Outgoing payments > Manual Outgoing payments >
    Define Tolerance (Vendors)
    STEP 4 : Create a GL A/c Creditors in FS00 as a balance sheet a/c and in control tab give reconciliation type as Vendors
    and Field Status Group G067.  Assign this account in company code data in FK02.
    Regards,
    Sadashivan

  • Service Category Error in Create Service Master Record - AC03

    Hi,
    I'm trying to create a new service master record. When I select  service category "SERV service : purchasing" from the list I get the error "Missing Authorization : Create Service SERV"
    Please help.
    Regards,
    Sriram

    Please use transaction code SU53 to know the object name which is missing in to your profile.
    Once u will get the access of this Object, u will be able to post the SES.
    Please take help from BASIS team.
    Edited by: Manish Kumar Agarwal on Jul 3, 2009 1:38 PM

Maybe you are looking for