Transactional Iview passing parameters for search help window

Hi Experts,
I have to create a transaction ivew through which i need to pass parameters to search help window (having two entries ). In has to select the particular entry and then go to next step.
Can somebody give me guide me how to do it as i couldn't fine correct answer in the existing forum answers.
Regards,
Suresh

Hi Suresh,
Have you read the [documentation|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm]?
>ApplicationParameter
>
>You can enter parameter values for certain screen fields for displaying a SAP transaction here.
>This field is optional.
>
>The parameter values are specified with the following syntax:
>
><Screen_field1>=<Parameter1>
>&<Screen_field2>=<Parameter2>
>&<...>=<...>,...
>
>Process First Screen
>
>The possible values are trueand false. By default this field is defined as false. It is a required field.
>
>If the value is set to true, this corresponds to the input key function in the transaction. It takes effect if there are no required >fields in the transaction or if all the required values are maintained in the ApplicationParameter property.
Regards,
Pierre

Similar Messages

Transaction iView - pass parameters to non-default tab

Hi Experts,
I have a requirement to call transaction iView from Webdynpro ABAP application by passing some default values.
I am able to call the iView and also able to pass parameters. My requirement is to pass values to the tab in iView which is not the default tab when I execute the TCode.
Is this possible using absolute navigation...??
If yes please let me know how can that be achieved...
Thanks in Advance....!!!!
Regards,
Shruti Shah

Hi,
Do you already know a way to reach this transaction to a desired tab with out using webdynpro ?. Is it possible at all in any way to start this transaction and position to a particular TAB.
If you do not know that then i am afraid that no one could help you out in forum.
Good luck

Transaction IView -- SAP GUI for Windows

Hi,
I have created a transaction iview -- sap gui for windows in my portal.
Even thought i logoff from my portal, sap gui session that is opened is not closed.
Can any one please suggest me a way to stop sap gui session also when i logoff from my portal.
Regards,
Nidhideep.

Very difficult. The SAPGUI window doesn't know anything about being launched by the portal.
You could try launching inside the portal content area.
Also, what is the problem with having the SAPGUI still open?
Cheers

Field values are repeating for search help.

Hello Friends.
I have a problem. When I create a search help for a field the identical field values are repeating. What should I do to trigger only the first time.
for example:
Field-name- field-value
Supplier Nr --- Commodity
5001 -
 casting
5002 -
 casting
5003 -
 casting
So when I create the search help for commodity it is showing 'casting' 3 times in a pop-up window. It should not repeat. Can you please give me the solution what should I do?

Hi
Search helps
Standard search help
Types of search helps
Concept of search help
Search Help Interface
Dialog behavior of search helps
Selection method for search helps
Performance of search helps
Attaching search helps
Hierarchy of search helps
Standard Search Help
The input help (F4 help) is a standard function of the R/3 System. It permits the user to display a list of possible values for a screen field. A value can be directly copied to an input field by list selection.
The fields having an input help are shown in the R/3 System by the input help key to the right of the field. This key appears as soon as the cursor is positioned on the corresponding screen field. The help can be started either by clicking on this screen element or with function key F4.
If the number of possible entries for a field is very large, you can limit the set of displayed values by entering further restrictions.
Further meaningful information about the displayed values is included in the display of possible entries, especially if the field requires that a formal key be entered.
TYPES OF SEARCH HELPS
Elementary search helps
Describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
Collective search help
Combine several elementary search helps. A collective search help thus can offer several alternative search paths.
Search Help Interface
Search help interface determines how the exchange of values between the screen template and the selection method is implemented.
The search help interface defines the context data that can be used in the input help and the data that can be returned to the input mask. Analogously to the interface of a function module, the search help interface comprises interface parameters.
When you define an interface parameter of a search help, you must also define whether it should be used to copy data to the input help (IMPORT parameter) or whether it should be used to return data from the input help (EXPORT parameter). A parameter of a search help can also have both attributes at the same time.
The location from which the IMPORT parameters of a search help get their values and the screen fields in which the contents of the EXPORT parameters of the search help are returned are defined in the search help attachment. The search help itself should always be attached to an EXPORT parameter of the search help. If this parameter is also the IMPORT parameter, its contents are only used in the input help if it is a search string (that is, if it contains a ´*´ or a ´+´).
You must define the parameter types of a search help. You can do this by assigning them data elements.
Value Transport for Input Helps
NOTE:In the above example, screen fields A, B and C are linked with parameters of the search help. As a result, values can only be transported between the screen and the search help for these three fields. Existing contents of screen fields A and B can be used for selecting the hit list since they are linked with an import parameter of the search help. The values of parameters A and C can be returned to the screen from the hit list since these parameters are declared as export parameters of the search help.
Description of dialog behavior
A hit list might contain plentiful number of entries. A
dialog provides the user with an option to restrict the
entries displayed on the hit list.
In an input help process, the set of possible entries is presented in the dialog box as a list for displaying the hit list. The user selects the required value from this list by double clicking. Since the possible entries are often formal keys, you must be able to display further explanatory information about the possible entries in the list.
If the set of possible entries is very large, the user should be able to define additional conditions for the attributes of the selected entry. Restricting the set of data in this way both increases the clarity of the list and reduces the system load. Additional conditions can be entered in a further dialog window, the dialog box for restricting values.
Specifying the dialog type of a search help defines whether the dialog box for restricting values should be offered and if so under what conditions.
The attributes in the dialog box for displaying the hit list or in the dialog box for restricting values must be defined as internal parameters of the search help. An internal parameter can also be used in only one of the two dialog boxes. It can also belong to the search help interface.
The internal parameter types are also defined with data elements. These data elements define how the parameters are displayed in the two dialog boxes.
Reward if usefull

Extra fields in search help window in Record working time EHP5

Hi Experts,
Can you please let me know how to add additional fields/select options in search help window for Record Working Time ?
My system is EHP5 NW 7.02
I have added the custom search help for the respective filed in table " TCATS_SHLP_ITS".
I can see this table is having entry for only 4 selection options and 6 value fields for search help display.
But in my custom search help programme is having 8 select options(for advance search) and 10 display fields on the search window. It's working from CAT2 transaction but when I am running through webdynpro timesheet, I can only get 4 select options and 6 value fields.
Please let me know how to make the other fields available.
Thanks in advance.
Sonia

Hi Siddharth,
Thanks for your response. In that modify possible entries screen (Details view) I can see the search help is only having 4 select options and 6 display fields.
So as per my understanding max 6 display fields/4 select options can only be displayed on search window.
My requirement is to display more fields on search help OVS window.
Can you please suggest.
Thanks ,
Sonia

How to pass parameters between two xterm windows?

Hi,
I would like to know how to pass parameters between two xterm windows where there are two independence processes running on them respectively ? Would appreciate if any one out there can advise me . Thanks.

Global variables can be used, but you can do what the online help
says ...
Parameters are passed to called forms by means of a parameter
list. A parameter list is a named programmatic construct that is
simply a list of parameter names (called keys) and their values.
You can pass parameter values to forms invoked by the built-in
subprograms CALL_FORM, OPEN_FORM, and NEW_FORM. In addition, you
can pass parameter values to other Oracle tools with the
RUN_PRODUCT procedure.
A parameter you include in a parameter list can be either a text
parameter or a data parameter. The parameter type determines how
its value is interpreted.
Text Parameters The value of a text parameter being passed to a
called product is a CHAR string that can represent the following:
n a user-defined form parameter defined in a form invoked
by the CALL_FORM, OPEN_FORM, or NEW_FORM built-in subprograms
n a command line or user-defined parameter for a product
invoked with the RUN_PRODUCT built-in subprogram
Data Parameters The value of a data parameter being passed to a
called product is always the name of a record group defined in
the current form. (A record group is a data structure that
stores records derived from a query or through programmatic
assignment.) Data parameters are used to pass data to products
invoked with the RUN_PRODUCT built-in subprogram. You cannot
pass data parameters to forms.
The following table shows the structure of a parameter list that
contains four parameters:
Key Paramtype Value
CITY Text_Parameter 'BOGOTA'
CATEGORY Text_Parameter 'EXPORTS'
MULTIPLIER Text_Parameter '.0275'
NEW_DATA Data_Parameter 'RECORD_GROUP8'
arun reddy (guest) wrote:
: im trying to do this but i could not find any way for this.
: can any one help me how can i pass parameters between two forms
: in forms4.5. any help will be appreciated
: thanks.
null

How to get results of search help window?

Hi, experts,
I have a question here.
For a field vendor id there is pre-defined search help, with which the detailed information of vendor inclusive the vendor id will be returned. But it will only fill this vendor id field. other information in the result like vendor name will be lost. I still need this information for other fields. And I hope to get other fields filled with the info in the results.
How can I get the complete info in the result delivered by search help window?
Can anybody help?
Best regards,
Fan

In short you need to fill the other fields on the screen using the same search help.
for that read this thread, Thomas nicely explained the same with an example
Re: Help On Search Help !!!!!
Abhi

Function Module for search help Exit

How to create a function Module for search help exits?
please explain in details with step by step process.

Hi,
How to create a function Module for search help exits?
function module for search help F4IF_SHLP_EXIT_EXAMPLE
dynamic search help use 'F4IF_INT_TABLE_VALUE_REQUEST'
please check out the link below it will help you
A repository object maintained in the ABAP Dictionary. It supplies input fields on Dynpros with single- or multi-column input helps. Search helps can be linked in the Dictionary with components from structures, data elements, and check tables. A search help enables you to search for entry values with assigned data, without you having to know the exact spelling of the value.
http://help.sap.com/saphelp_46c/helpdata/EN/cf/21ee52446011d189700000e8322d00/content.htm
please explain in details with step by step process.
create a search help exit:
1. create an fm with this interface:
*" TABLES
*" SHLP_TAB TYPE SHLP_DESCR_TAB_T
*" RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*" VALUE(SHLP) TYPE SHLP_DESCR_T
*" VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
put this logic in it:
Delete duplicate filter logic.
This logic only needs to apply at the 'DISP' event - which is just
before the hit list is displayed
if callcontrol-step = 'DISP'.
delete adjacent duplicates from record_tab.
endif.
2. edit your search help in se11 and enter the name of the above search help exit fm
check this sample code..for dynamic search help
REPORT ZTEST_F4HELP                              .
*---Report with selection screen and to display the list of
possible entries for field 'B' as per the value in field 'A'.
parameters: p_vbeln type vbak-vbeln,
            p_posnr type vbap-posnr.
at selection-screen on value-request for p_posnr.
data: begin of help_item occurs 0,
          posnr type vbap-posnr,
          matnr type vbap-matnr,
          arktx type vbap-arktx,
        end of help_item.
data: dynfields type table of dynpread with header line.
dynfields-fieldname = 'P_VBELN'.
append dynfields.
call function 'DYNP_VALUES_READ'
       exporting
            dyname               = sy-cprog
            dynumb               = sy-dynnr
            translate_to_upper   = 'X'
       tables
            dynpfields           = dynfields
       exceptions
            invalid_abapworkarea = 1
            invalid_dynprofield = 2
            invalid_dynproname   = 3
            invalid_dynpronummer = 4
            invalid_request      = 5
            no_fielddescription = 6
            invalid_parameter    = 7
            undefind_error       = 8
            double_conversion    = 9
            stepl_not_found      = 10
            others               = 11.
read table dynfields with key fieldname = 'P_VBELN'.
p_vbeln = dynfields-fieldvalue.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
       exporting
            input = p_vbeln
       importing
            output = p_vbeln.
select posnr matnr arktx into table help_item
                 from vbap
                      where vbeln = p_vbeln.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield    = 'POSNR'
            dynprofield = 'P_POSNR'
            dynpprog    = sy-cprog
            dynpnr      = sy-dynnr
            value_org   = 'S'
       tables
            value_tab   = help_item.
also check this link it will help you
/message/3854825#3854825 [original link is broken]
*********please reward points if the information is helpful to you*************

Transaction iView - SAP GUI for HTML-blank on some systems

Hi,
I have few transaction iviews - SAP GUI for HTML running perfectly well on few systems. But the same iViews fail to load in few other systems. A blank iview is displayed. What could the problem be?
Thanks and Regards,
Reena

Hi Reena,
Have a look at the product availability matrix:
https://websmp108.sap-ag.de/~form/handler?_APP=00200682500000001303&_EVENT=RELEASE&00200682500000002804=01200615320900001250&00200682500000003818=WBRPFM&00200682500000003853=Enterprise%20Portal
IE 7.0 may have some problems if using it with ITS. Ensure that IE are all on the same version (6.0 for example) and the same service pack. We have everyone using IE 6.0.2800.1106 and it works fine now.
Regards,
Nick.

Transaction Iview - SAP GUI for HTML

Hi,
In SAP transaction iviews - SAP GUI for HTML in portal there is a possibility to go to menu,other transactions from the transaction field.Is there any way to remove the Menu button and hide the transaction field from transaction iview.
Please suggest.
Thanks,
Rajani

Hi Rajani,
Transaction iview which will control the menu,cancel buttons in SAP GUI for HTML
the url provided by Damian contain the solution for your requirement.
If you are looking somthing different then pls explain the requirement
Just let us know which specifiy buttons you want to show in transcation IVEW.
Thanks,
Anil

How to do program for search help

Hi,
Please tell me how to do the program for search help in Dialog programming.
Thanks,
Sriram.

Step 1:
Create a function module (ZZ_TEST_FUNCTION).
Step 2:
--> Create a search help(ZSEARCH)
--> Enter the above function Module(ZZ_TEST_FUNCTION) in search help exit field.
STEP 3:
Attach the search help with any field of table.
Function module Sample Code:
FUNCTION ZZ_TEST_FUNCTION.
""Local interface:
*"       IMPORTING
*"             VALUE(MCONAME) DEFAULT SPACE *"             VALUE(SELSTR) DEFAULT SPACE
*"       TABLES
*"              SHLP_TAB TYPE SHLP_DESCR_TAB_T
*"              RECORD_TAB STRUCTURE SEAHLPRES
*"       CHANGING
*"             VALUE(SHLP) TYPE SHLP_DESCR_T *"             VALUE(CALLCONTROL) LIKE DDSHF4CTRL
*"                             STRUCTURE DDSHF4CTRL
CALL SCREEN 100.
Return from application back to SAP
CASE save_ok_0100.
    WHEN 'RSTR'.
      callcontrol-step = 'SELONE2'.
    WHEN 'CANCEL' OR 'BACK' OR 'EXIT'.
      callcontrol-step = 'EXIT'.
    WHEN 'SEL'.
        READ TABLE itab.
        record_tab = itab-filed1.
        APPEND record_tab.
        callcontrol-step     = 'RETURN'.
       EXIT.
      ENDIF.
ENDCASE.
ENDFUNCTION.

Transaction iView - pass web dynpro parameter

Hi!
I created a web dynpro (ABAP) iView with a button on it. Selecting the button opens a transaction iView. (SAP GUI for Windows) I want to pass a web dynpro parameter to the SAP GUI iView and write the value of this WD parameter into a screen field at SAP GUI.
I suppose I have to use 'Application Parameters' as described at [help.sap.com|http://help.sap.com/saphelp_nw70ehp1/helpdata/en/88/266a3e54a2e946e10000000a114084/frameset.htm], but until now any attempts failed...
Best regards,
Sandra

Hi Sandra, did you solve this? I am facing the same requirement.
Thanks

Transaction iView - SAP GUI for HTML - Problem while hiding menu bar

Hello all,
I am trying to hide the OKcode field and the Menu button in a Transaction iView of type SAP GUI for HTML. I am following the SAP note 1010519. However, nothing seems to change, even after adding the parameter ~webgui_simple_toolbar = 0 or any other value.
I added the parameter to the service: default_host ->sap -> bc -> gui ->sap -> its ->webgui
After going through few posts relating to this issue, I figured out that passing application parameters would not work. Also, using IAC is not an option for me.
Can someone help? How can I hide the OKCode field and Menu bar?
Thanks and Regards,
Reena

Hello Reena,
Maintaining the parameter
~WEBTRANSACTIONTYPE EWT
will solve your problem. You can also create an IAC iview. Here is a document for the same.
<a href="https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/ep/_d-f/Displaying%20SAP%20Transaction%20as%20Internet%20Application%20in%20Portal.pdf">How to diplay a transaction as IAC iview</a>
Also remove the parameter ~noheaderOkCode.
Hope that helps.
Regards
Deb

Call a Transaction iView with parameters

Hello,
can anyone help me with the following problem:
I'll just tried to call the transaction RECN with a transaction iView. When I test the iView it works but not with any parameters in the URL.
I'll tried the parameters fix in the iView properties but without any result.
Can someone tell me the correct syntax? I'll tried everything I can find in the SAP help and here in the forum.
Have someone a how to for calling transaction iView with dynamical parameters?
Thanks for help!
Best regards
Martin

Martin,
Have you had a look at these yet?
http://wiki.sdn.sap.com/wiki/display/EP/StartanSAPtransactionfromaURL
How to launch SAP transaction & pass parameters via URL
Cheers!
Sandeep Tudumu

Hideing menu in Transaction iview with GUI for HTML

hi,
I have created a transaction iview with ITS
now the requirement is that user should not see any menu
i have googled and found some abstract information like
~singletransaction.
~webgui = 1
~generatedynpro = 1
not clear with how and where to do it
please let me know if it is possible to hide the menu from IView it self by passing some parameters
Thanks,
Pavan

Hi Pavan,
Refer to this
http://wiki.sdn.sap.com/wiki/display/HOME/Article-EmploySAPGUIforHTMLinsteadofanInternet+service
You need to modify the WEBGUI service for this.
In transaction SICF, Navigate to dafault_host->sap->bc->gui->sap->its->webgui.
Thanks
Prashant

Transactional Iview passing parameters for search help window

Similar Messages

Maybe you are looking for