Transfer of values from one application to other
hi,
Can i update second plng application members from first application's default.lgf file.
Can i anyone give simple example on before range & after range options?
thanks,
Hi,
I dont think you can update members. However, you can definitely send transactional data from one application to another using the DESTINATION_APP statement.
You have a good example available in BPC 320 on beforerange and afterrange.
Lets say that there are 5 columns in the report after the EVDRE expansion is done. Then in the beforerange or afterrange, you can use EVRNG function with a range of 5 cells. Lets say that you define EVRNG(J1:N1). In these cells, you can use formulas like EVSUM etc, and these formulas will be taken by the rows in your EVDRE report. If you define afterrange, then you will have additional row at the bottom. If you define beforerange, then you will have additional row at the top.
Hope this helps.
Similar Messages
-
Transfer of values from one recon to other recon account
Guru's,
I wanted to change the recon account of a vendor from 8050001 to 8050002.
Few entries are already posted in the vendor with the recon 8050001. I know that FAGL101 can be used to transfer the values from 8050001 to 8050002.
In the OBBW I did the configuration like this
Reconciliation account : 8050001
Adjustment Account : 9000014(Clearing account)
Please advise me if I need to do any other settings in Config and also tell me the procedure to run that in FAGL101.
Thanks in advance and points will defnitely be assigned.
DeepakHi,
I dont think you can update members. However, you can definitely send transactional data from one application to another using the DESTINATION_APP statement.
You have a good example available in BPC 320 on beforerange and afterrange.
Lets say that there are 5 columns in the report after the EVDRE expansion is done. Then in the beforerange or afterrange, you can use EVRNG function with a range of 5 cells. Lets say that you define EVRNG(J1:N1). In these cells, you can use formulas like EVSUM etc, and these formulas will be taken by the rows in your EVDRE report. If you define afterrange, then you will have additional row at the bottom. If you define beforerange, then you will have additional row at the top.
Hope this helps. -
Transfer field value from one screen to another screen
hi gurus,
I am using field exit in mm02, i want to transfer field value from one screen to another screen. I am using Export, Import, Some FM like DYNP.......
but not getting the value.
can any one give idea about this.
Thanks in Advance,
Sudheer.I THINK IN FIELD EXITS SOME RESTRICTION IS THERE YOU CAN NOT USE CALL TRANSACTION OR CALL SCREEN. I DONT KNOW WHAT IS YOUR ACTUAL REQUIREMENT. BUT YOU ARE TRYING TO CALL TRANSACTION USING MEMORY ID OR SOMETHING THEN I THINK IN FIELD EXIT YOU CAN NOT DO THAT. PLS CORRECT ME IF I AM WRONG
REGARDS
SHIBA DUTTA -
How to make data flow from one application to other in BPEL.
Hi All,
I am designing work-flow of my application through BPEL(JDeveloper), I am making different BPEL projects for different functions, like sales manager got the order from sales person and sales manager either approve it or reject it, if he approve it it goes to Production manager and he ships the goods, now I want to keep sales person, sales manger,production manager in seperate BPEL files and want to get the output of sales person to sales manager and sales manager to production manager please help me in dong this.
I was trying to make partner link in Sales manager of sales person and getting the input from there. I dont know this is right even or not, if it is right I dont know how to make data flow from one application to other.
Experience people please guide.
Sales Person -----> Sales Manager ----> Production Manager
Thanks
YatanYes you can do this.
If you each integration point to be in different process, you have to create three BPEL process.
1. Create a Async BPEL process 'A' which will be initiated when sales person creates the order.
2. From BPEL process 'A' call a ASync BPEL process 'B' which has the approval flow. Depending on the input from process 'A' the sales manager will review the order in workflow and approve or reject and send the result back to process 'A'.
3. Based on the result from workflow, invoke the Sync BPEL process 'C', where you can implement the shipping logic.
-Ramana. -
How to transfer all materials from one plant to other plants?
How to transfer all materials from one plant to other plants?
Hi
To transfer stock in one step between plants belonging to same company code use movement type "301" and using transaction code "MIGO". IF you like in two step it helps to monitor stock in transit use movement type "303" and "305".
303 Transfer posting plant to plant in two steps - removal from storage
305 Transfer posting plant to plant in two steps - placement in storage
to transfer stock between plants of diffrent company code go for stock transpor order using tcode "me21n"
hope it helps -
How to transfer my iBooks from one ipad to other?
How to transfer my iBooks from one ipad to other?
Purchased iBooks can be redownloaded on all devices. If they are not from the iBookstore, connect your iPad to computer and 'transfer purchases'. They should now be transferred to iTunes (or iBooks if you are using Mavericks). You can then sync using the other iPad.
-
How can I pass a value from one application to another through URL
I am passing a value APP_USER from one application to another application (item is P_ASK_U) through navigation bar entrees URL.
This is working with in the application..(javascript:popupURL('f?p=&APP_ID.:165:&SESSION.::&DEBUG.::P_ASK_U:#&APP_USER.#') )
This one is not passing the value, eventhough it open the application..
javascript:popupURL('http://htmldb.oracle.com/pls/otn/f?p=35129:1:::P_ASK_U:&APP_USER.');
Is there any syntax error or is it not possible, please let me know..
Thanks
VenuHi Scott,
You are right, the first one do not need # character.
In the Doc it is mentioned as....
Pass the value on a URL reference using f?p syntax. For example:
f?p=100:101:10636547268728380919::NO::MY_ITEM:ABC
I am using the following URL, it pops up the external application, but it is not passing the APP_USER value to the page item of that application.
javascript:popupURL('http://htmldb.oracle.com/pls/otn/f?p=35129:1::P_ASK_U:&APP_USER.');
sorry I still do not know what I am missing..
Thanks
Venu -
Can we drill down from one application to other in design studio 1.2
Hi All,
Can we drill down from one application to another application in design studio 1.2?
I have a requirement where in on clicking one should drill down to a detail level information shown in a different application.
Regards,
TanishaA quick suggestion would be to look at OpenDoc - see this thread Passing Parameters with OpenDocument in SAP Des... | SCN
-
Standard procedure to transfer Inventory Items from one Warehouse to other
Dear All,
Please let me know what is the standard procedure to be followed while transferring Inventory Items from one warehouse to other warehouse through SDK. Right now I am using sql statements to deduct and add the items to and from warehouse. Its not working properly. Please let me if any business object is provided by SAP to achieve this functionality.
Regards,
Noor HussainHello Noor,
You can use stocktransfer object:
Private Sub PostStockTransfer()
Dim oDoc As SAPbobsCOM.StockTransfer = oCompany.GetBusinessObject(BoObjectTypes.oStockTransfer)
oDoc.DocDate = Date.Today()
oDoc.FromWarehouse = "01"
oDoc.Lines.ItemCode = "A0001"
oDoc.Lines.WarehouseCode = "02"
oDoc.Lines.Quantity = 10
If oDoc.Add = 0 Then
sbo_application.MessageBox("Stock transfer Issued")
Else
sbo_application.MessageBox(oCompany.GetLastErrorDescription)
End If
End Sub
Regards
János -
Transfer finished material from one unit to other with excise
Hello to all
we are manufacturing Crane and we want to transfer a finished product from one unit to other unit with taken 50% credit on Excise
.we are use that crane for Home comsuption .
we are waiting for your reply.
please give us step by step procerdure
thanks
regard, riten
Edited by: riten patel on May 26, 2009 12:23 PMhello
i have already do it using j1id
but still i do not get 50% credit on this material
first i make po of this materia
then declare this material as Asset using j1id t code
then make grv of this material
then I made invoice using j1iex
but still do not get 50% credit on excise
when i simulate that invoice i got one erroa as
"NO CENVAT AMOUNT TO BE POSTED"
"NO CENVAT AMOUNT TO BE REVERSED"
so tell me what is its solution
i am waiting your responce
thanks
regard,
riten -
Passing the values from one application to another application using mvc
Hi sdn,
Iam new to bsp.i created one application zappl1 in that i created one controller and one view.in that view i created 2 input fields.and also created another application zappl2 in that also created one controller and one view. wai i want to enter in the inputfileds of first application view that values will be display in second application view.Please help out of this.Hi,
I can see 2 ways of doing. Either you use parameters in the URL from the first application to the second, as any web application would do.
Or, you can think of using the Web Application Server let :
- the first application store the values
- for the second application to retrieve
Personnally, I would tend to suggest the first solution as it allows both applications to be replaced later on.
Best regards,
Guillaume -
Auto transfer of values from one customer to another/vendor to vendor
Hi,
Do we have any transaction code which transfers values automatically from one custmer/vendor to another customer/vendor.
Thank you,
Asamtry f-30
This is transfer with clearing.
You need to know the value of the customer and then you can journal it to clear all open items against the customer and create a single line item in the new Company Code.
This t code is also used to move line items to different company codes and special gl indicators.
It can be used for Vendors as well.
Please award points if this is helpful. -
How to transfer variable value from one query to another query?
I create two queries which contain the same variable "Year" and "Month".
In the wad,Query1 is used to be a table and Query2 is used to show the chart in the condition with the same variable value of Query1
So I want to transfer the variable value from query1 to query2.
Can anyone help me ?Let me explain the issue in detail.
In Query Designer, both the year and month variables are defined by user exit function to read current year and month and can be modified during the query runtime.
In WAD, Query1 is used to be a table with a table interface to hyperlink a chart which is defined by Query2 with the same variable value of Query1.
During the runtime of template, if I change the variable value of Query1 , I want the variable of Query2 to be changed automatically with the same new value.
So in the table interface of Query1 , I write the ABAP code in "SE24" and related source code to the variable is following:
concatenate
'function fire_urlJGSP_Col(filter) {'
Cl_rsr_www_renderer=>c_lf
'chart_url="' url '" + "&CMD=LDOC'
'&TEMPLATE_ID=GCCHART_9' "WEB ID of the work book
'&PAGEID=Graphics' "Name of the view
'&CMD=PROCESS_VARIABLES&SUBCMD=VAR_SUBMIT&VAR_NAME=Z2MYEAR&VAR_VALUE_EXT=" + filter'
Cl_rsr_www_renderer=>c_lf
'openWindow(chart_url,"chart_window","dependent=yes","600",'
'"450","true")'
Cl_rsr_www_renderer=>c_lf
into l_coding.
In this way , I can only transfer the year variable value from Query1 to Query2 and not two variables .
So , how shall I do to transer the two variable value in the same? -
How to set value from one view to other view's context node attr b4 save
HI all,
My requirement is as below:
There are two views in component BP_CONT.
BP_CONT/ContactDetails IMPL class
BP_CONT/SalesEmployee SALESEMPLOYEE STRUCT.SALESEMPLOYEE
I want to set value from first view to second view's context node's attribute.
i get Sales Employee BP number in ContactDetails view, from here i want to set that value in to STRUCT.SALESEMPLOYEE
of second view in the same component.
please send me code snippet for doing the same.
Thanks in advance.
seemaHi Seema
You can access the fields from different views by either using custom controllers or by using component controllers, in your case you can access the Sales employee BP number from the Component controller.
first access the component controller as below in BP_CONT/SalesEmployee (in do_prepare_output method) or in (specific setter method)
lv_compcontroller type ref to CL_BP_CONT_BSPWDCOMPONENT_IMPL,
lv_partner type ref to cl_crm_bol_entity,
lv_role type string,
lv_partner_no type string.
lv_employee TYPE REF TO if_bol_bo_property_access,
lv_compcontroller = me->COMP_CONTROLLER.
lv_partner ?= lv_compcontroller ->typed_context->-partner->collection_wrapper->get_current( ).
lv_role = lv_partner->get_property( iv_attr_name = 'BP_ROLE' )
IF LV_ROLE = 'SALESEMPLOYEE'
lv_partner_no ?= lv_current->get_property( iv_attr_name = 'BP_NUMBER' ).
endif.
now set the value
lv_employee ?= me->typed_context->salesemployee->collection_wrapper->get_current( )
CHECK lv_employee IS BOUND.
lv_employee->set_property( iv_attr_name = 'SALESEMPLOYEE' iv_value = lv_partner_no )
Thanks & Regards
Raj -
Copy value from one ctype to other ctype
Hi Experts,
I am creating a sales order with reference to a contract. I want to copy the rate (KBETR) of condition type ZXXX from contract to condition type ZYYY in sale order. But I am not able to copy it through copy control.
Can anyone help me?????????
Regards,
Kuldeep DahiyaHi Kuldeep Dahiya,
Copy control only copies one document to other document with same condition types, for your requirement you need to write a routine.
Instead why not copy ZXXX to ZXXx only in contract and order.This is a standard functionality-if you want to copy ZXXX to ZYYY then you require development in the form of a routine.
I hope i have understood your query clearly.
regards,
US
Maybe you are looking for
-
Memory upgrade on HP Pavilion g6
Hello Can my HP Pavilion g6-1185sa with 4GB RAM be upgraded to a greater amount of RAM? If so what is the maximum and what type should I use? Thank you This question was solved. View Solution.
-
Problem with restore.I have a 2 gen running firmware version 4.2.1
Hello there ! Hopefully some smart persons here will be able to help me. First it has been awhile since i used my itune store because i didnt needed to and did a format of my computer after the last time i used it..so i had to upload my library etc a
-
Hi, I would like to connect a mac mini to a PC, so the mac mini can use the processors and hard drive of the pc is this possible. Thank Rick
-
Invalid Drive G:/ error message when trying to download I-Tunes 9
I have had problems trying to download the last two versions of I-Tunes but as my ipod classic was working wasn't bothering. I just recieved an Ipod Nano 5th Generation for Christmas and when I plug into computer states that it needs newer version of
-
Parsing Issue in Filter For Date Format
Hi Folks, I am having Parsing Issue on "Key Date" Object in Universe. See the Error and Code below for your review Error: Parse Failed: Exception: DBD, The value entered is not valid. It must adhere to one of the following formats. YYYYMMDD DD.MM.YYY