Transferring files from old Beige G3 machine to new G5 Dual Core (10.4.3)

Someone please help me. I'm desperately trying to move some files from my old G3 (9.2) to my new G5.
I have tried to use an ethernet cable. I turned on file sharing on the G3, and the G5 still isn't 'auto-sensing' the cable connection.
I have usb 2.0 on the old machine. Perhaps I could use a usb cable to transfer the files?

Welcome to Apple Discussions!
As the G3 is not autosensing, you need a crossover cable or a router.
See these instructions I wrote here:
http://www.macmaps.com/network9X.html
Disclaimer: Reference to links I make to my Macmaps.com website are a for your information only type reference. I do not get any profit from this page, and it is open to the public.

Similar Messages

New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

New to mac. While transferring files from old computer to mac I burnt out a brand new flash drive. How do I format a new flash drive so that it will let me transfer stuff from mac to pc or vise versa??

"guess no one can help me. thanks anyway have a great night everyone"
Some of us do find time to sleep.

How to activate CS3 after transferring files from a dead computer to a new computer

How do I activate CS3 after transferring files from a dead computer to a new computer?
I have a CS3 on an iMac. My old iMac's disk drive failed completely. So, I cannot turn it on.
I installed all my files and programs from a back-up drive. Adobe Product Support said I should go to the Forum.
Any ideas?
Thank you
Andy Serrano

The message I get when I try to start Photoshop says, "Licensing for this product has stopped working." You must contact customer support.

Transferring content from old apple ID to a new one?

As question says I need help transferring content from old apple ID to a new one as my old apple ID was reported for spam and now I can't use it, thanks!
[email protected]

Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
FAQs http://support.apple.com/kb/HE37
However... To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact

Transferring files from old computer with fire wire

I'm transferring files from my old computer to my new one. The old one has three hard drives. Everything from the startup drive transferred OK over fire wire, but the new computer doesn't see the 2nd and 3rd hard drives on the old one. Is there a way to link these? Thanks!

Click here and follow the instructions, setting up FireWire networking from System Preferences if desired. FireWire Target Disk mode will only connect to the master ATA drive on the ATA 0 bus, and will shut down the computer if there's nothing at that location.
(30151)

Transferring files from old computer freezes on Mac Pro

Hi everyone-
I'm new around here and I'm having a problem. I just bought the Mac Pro and right now I am trying to transfer my files from my older computer to this new one. My old computer is a Powerbook G4 Laptop, and I want some files to be on the Mac Pro. So I attached a firewire cable to the Powerbook G4 and to the Mac Pro, and I booted up the Powerbook G4 and held the 'T' button down like you are supposed to. The Powerbook then shows up in the finder window on the Mac Pro, but then all of a sudden the Mac Pro freezes. Even when it didn't freeze, I clicked on the Powerbook G4 Hard Drive icon in the finder window, and some of the drive's contents load but then I just get the spinning colored pinwheel. And nothing happens! Why is this happening, can someone help me out? I tried it earlier and it worked, but now it is repeatedly not working. Thanks!

If you have both computer connected to the same internet connection there's nothing to do cable-wise. All you need to do is…
1) Go to the Sharing System Preference and turn in Personal File Sharing on one of the system, preferably the PowerBook
2) Go to the other system and select the Network menu item from the Go menu (in the Finder)
3) You should now find your other system here and double click on it
4) You should now be asked to log in, just use the log in details you would use to start the other system
5) Now you will be asked which "volume" you want to connect to (select the one that is names you login if you only want to copy documents)
6) You will now have access to the other computer with a disk mount on yur Desktop

How to load files from old external hard drive to new PC

Copied files from old PC (Windows XP) to external hard drive. Purchased new PC (Windows 7). Paid technicians to transfer files from old PC to new PC. Some files were lost in the process.
Please walk me through (step by step) on how to load spicific files from an external hard drive onto my new PC.
Thanx, rp1

Click anywhere on the open desktop so that the Finder menus are displayed at the top of the screen.
Click Go > Network
Double click the Time Capsule icon, then double click the icon representing the drive to mount it on the Mac's desktop. It is named "Data" unless you have changed it
You can drag/drop files to the "Data" icon on the desktop
235 GB is going to take forever if you try to do this using wireless. If at all possible, connect an Ethernet cable from your Mac to one of the LAN <-> ports on the Time Capsule.
Even using Ethernet, you are probably looking at 10-12 hours for the file transfer. All bets are off with wireless only, but a guess would be several days....or even more.

My MBA is being shipped, question about transferring files from old PB

Hey guys,
I just ordered a new 13" MBA and am anxiously awaiting for it to arrive... I currently have a 12" Powerbook G4 with 10.5.8 that I use an external drive to back up with time machine.
My question is this; when I get my MBA will I be able to use the time machine back up to migrate my files even though my old computer has an older version of Mac OS on it?

A Basic Guide for Migrating to Intel-Macs
The Knowledgebase article Intel-based Mac: Some migrated applications may need to be updated refers to methods of dealing with migrating from PowerPC chips to Intel with the Migration Assistant safely. The authors of this tip have not had a chance to verify this works in all instances, or that it avoids the 10.6.1 and earlier Guest Account bug that caused account information to get deleted upon use of the Migration/Setup Assistant. However, a well backed up source that includes at least two backups of all the data that are not connected to your machine will help you avoid potential issues, should they arise. In event it does not work, follow the steps below.
If you are migrating a PowerPC system (G3, G4, or G5) to an Intel-Mac be careful what you migrate. Keep in mind that some items that may get transferred will not work on Intel machines and may end up causing your computer's operating system to malfunction.
Rosetta supports "software that runs on the PowerPC G3, G4, or G5 processor that are built for Mac OS X". This excludes the items that are not universal binaries or simply will not work in Rosetta:
Classic Environment, and subsequently any Mac OS 9 or earlier applications
Screensavers written for the PowerPC
System Preference add-ons
All Unsanity Haxies
Browser and other plug-ins
Contextual Menu Items
Applications which specifically require the PowerPC G5
Kernel extensions
Java applications with JNI (PowerPC) libraries
See also What Can Be Translated by Rosetta.
In addition to the above you could also have problems with migrated cache files and/or cache files containing code that is incompatible.
If you migrate a user folder that contains any of these items, you may find that your Intel-Mac is malfunctioning. It would be wise to take care when migrating your systems from a PowerPC platform to an Intel-Mac platform to assure that you do not migrate these incompatible items.
If you have problems with applications not working, then completely uninstall said application and reinstall it from scratch. Take great care with Java applications and Java-based Peer-to-Peer applications. Many Java apps will not work on Intel-Macs as they are currently compiled. As of this time Limewire, Cabos, and Acquisition are available as universal binaries. Do not install browser plug-ins such as Flash or Shockwave from downloaded installers unless they are universal binaries. The version of OS X installed on your Intel-Mac comes with special compatible versions of Flash and Shockwave plug-ins for use with your browser.
The same problem will exist for any hardware drivers such as mouse software unless the drivers have been compiled as universal binaries. For third-party mice the current choices are USB Overdrive or SteerMouse. Contact the developer or manufacturer of your third-party mouse software to find out when a universal binary version will be available.
Also be careful with some backup utilities and third-party disk repair utilities. Disk Warrior 4.1, TechTool Pro 4.6.1, SuperDuper 2.5, and Drive Genius 2.0.2 work properly on Intel-Macs with Leopard. The same caution may apply to the many "maintenance" utilities that have not yet been converted to universal binaries. Leopard Cache Cleaner, Onyx, TinkerTool System, and Cocktail are now compatible with Leopard.
Before migrating or installing software on your Intel-Mac check MacFixit's Rosetta Compatibility Index.
Additional links that will be helpful to new Intel-Mac users:
Intel In Macs
Apple Guide to Universal Applications
MacInTouch List of Compatible Universal Binaries
MacInTouch List of Rosetta Compatible Applications
MacUpdate List of Intel-Compatible Software
Transferring data with Setup Assistant - Migration Assistant FAQ
Because Migration Assistant isn't the ideal way to migrate from PowerPC to Intel Macs, using Target Disk Mode, copying the critical contents to CD and DVD, an external hard drive, or networking
will work better when moving from PowerPC to Intel Macs. The initial section below discusses Target Disk Mode. It is then followed by a section which discusses networking with Macs that lack Firewire.
If both computers support the use of Firewire then you can use the following instructions:
1. Repair the hard drive and permissions using Disk Utility.
2. Backup your data. This is vitally important in case you make a mistake or there's some other problem.
3. Connect a Firewire cable between your old Mac and your new Intel Mac.
4. Startup your old Mac in Target Disk Mode.
5. Startup your new Mac for the first time, go through the setup and registration screens, but do NOT migrate data over. Get to your desktop on the new Mac without migrating any new data over.
If you are not able to use a Firewire connection (for example you have a Late 2008 MacBook that only supports USB:)
1. Set up a local home network: Creating a small Ethernet Network.
2. If you have a MacBook Air or Late 2008 MacBook see the following:
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- Migration Tips and Tricks;
MacBook (13-inch, Aluminum, Late 2008) and MacBook Pro (15-inch, Late 2008)- What to do if migration is unsuccessful;
MacBook Air- Migration Tips and Tricks;
MacBook Air- Remote Disc, Migration, or Remote Install Mac OS X and wireless 802.11n networks.
Copy the following items from your old Mac to the new Mac:
In your /Home/ folder: Documents, Movies, Music, Pictures, and Sites folders.
In your /Home/Library/ folder:
/Home/Library/Application Support/AddressBook (copy the whole folder)
/Home/Library/Application Support/iCal (copy the whole folder)
Also in /Home/Library/Application Support (copy whatever else you need including folders for any third-party applications)
/Home/Library/Keychains (copy the whole folder)
/Home/Library/Mail (copy the whole folder)
/Home/Library/Preferences/ (copy the whole folder)
/Home /Library/Calendars (copy the whole folder)
/Home /Library/iTunes (copy the whole folder)
/Home /Library/Safari (copy the whole folder)
If you want cookies:
/Home/Library/Cookies/Cookies.plist
/Home/Library/Application Support/WebFoundation/HTTPCookies.plist
For Entourage users:
Entourage is in /Home/Documents/Microsoft User Data
Also in /Home/Library/Preferences/Microsoft
Credit goes to Macjack for this information.
If you need to transfer data for other applications please ask the vendor or ask in the Discussions where specific applications store their data.
5. Once you have transferred what you need restart the new Mac and test to make sure the contents are there for each of the applications.
Written by Kappy with additional contributions from a brody.
Revised 1/6/2009

Help transferring files from old Mac 10.3.9 to new Mac 10.6.1

Hi - I just bought a new iMac with Snow Leopard and I am trying to transfer my old files from my iMac running 10.3.9. I connected a FireWire cable between the two and restarted the old iMac while holding down the "t" key, using Migration Assistant on the new iMac. Migration Assistant kept saying that it was waiting for the old iMac to restart, even though the old one HAD restarted. I looked on the forums and saw that I should try to run Setup Assistant from the Utilities folder on the old iMac. But there isn't a Setup Assistant in the Utilities folder.
So I am at an impasse. Any suggestions would be greatly appreciated!

Some of the items I've found via searching suggest to avoid transfer or migration of older
files from the ancient 10.3 over to the newer 10.5 or 10.6. And when the old computer is
a PowerPC, the new Intel-based Mac may not see or be able to use some of the items.
The older Setup Assistant is supposed to do for Panther 10.3 what the newer Migration
Assistant does for Tiger 10.4; to an extent. The results from the older system are limited.
There is a way to have the new computer import some of the older computer's user files
and account info into it, before its first run; but with a leap so great between 10.3 & 10.6,
the results overall won't be as satisfactory as just running the new computer totally new;
going through the setup and upgrade processes independent of the old Mac altogether.
The Apple Support- Snow Leopard page should have some upgrade and migration help
info on there which may be helpful: http://www.apple.com/support/snowleopard/
It would appear that the instructions for migrating from an older Mac to one running 10.5
or 10.6 apply to the older computer, so the Panther software may be secondary if it really
matters at all in this process. See this document, and wonder along with me... This is not
quite the same as a migration assistant; but you don't need FW Target Disk in either case.
• Mac OS X 10.5, 10.6:
How to use Migration Assistant to transfer files from another Mac
http://support.apple.com/kb/HT3322
The older method may not apply in the path you've chosen, outlined here, below;
but note there are matters about file and older app compatibility in the newer OS:
• Mac OS X 10.3, 10.4:
Transferring data with Setup Assistant - Migration Assistant FAQ
http://support.apple.com/kb/HT1554
In the past, I've done a bit of upgrade and some migration action and found that overall,
the new OS X seemed to work a lot better with nothing old involved. That's just me!
And I'm sure each individual's mileage may vary...
Good luck & happy computing!
{ edited for no great reason }

Transferring Files from Old Computer to New Computer

I upgraded my iTunes to 9.1.1 on my old computer (and new computer). On the old computer, I have everything organized in playlists. When I transferred all my music from my old computer to my new computer (via ipod), my playlists do not show up. All the songs are in Music on the top of iTunes. Is there anyway to transfer the itunes exactly as it appears on my old computer to my new computer? Would a USB transfer cable take care of this problem? Please help

Hi there,
what you did is only transfer all of the MEDIA files into your new computer's iTunes. There is no problem with doing this, but all the media files include are well, the media obviously, and the tagging info (which displays name/artist/album/etc.) If all you do is move the media files onto the new computer and load iTunes, a new copy of iTunes (with no playlists/ratings/play counts and new settings) will load up, and put your content in it.
If you wish to preserve your playlists/ratings/etc, you need to import the iTunes Library File as well. This is by default located in your iTunes directory. So instead of just moving everything from "iTunes Media" (default location), it is best to move the ENTIRE "iTunes" folder, with the Library file and your media files.
However, one trick may still work. If you transfer JUST the Library file over (iTunes Library.itl), transfer it to your new computer, REPLACE the current iTunes Library file with the old one (so delete the new one, put the old one there). Open iTunes while holding SHIFT down the whole time, until a screen pops up asking you to find a library. Select choose library, and go to the location of the Library file we just moved. Select it, and if all goes well your playlists should be there!
You might come across one issue however, and that is if you changed the relative location of your media files. For example if you USED to have it on an external drive "my Music" and now it is on the internal drive in a folder labeled "iTunes Music", the computer may not be able to find your songs because it is looking in the wrong place. If that happens, and you are willing to lose your play counts and ratings, it actually might be more of a time saver to start over again and make your playlists from scratch.

Transferring files from old macbook to new

I'm trying to transfer files and programs from old macbook pro to new one, but run into problems using Migration Assistant, and time machine. Not sure what to do differently...

Probably the most straightforward way to get iTunes onto your new computer is to network the two and copy your iTunes folder across. This works fine if you have been using iTunes to completely manage your music and all your songs are in iTunes Music not in different folders. Connecting two Mac computers using Ethernet
Another way is to put your original computer into target disk mode and copy the data over Firewire: How to use FireWire target disk mode
Copying the whole folder brings with it the iTunes Music folder and also the iTunes Library (iTunes Library.itl in Windows) database file which holds all the information about your songs (Playlists, Ratings, Play Counts, Last Played, Date Added, etc). You'll get more information including the Folder/File structure in this article: What are the iTunes library files?
When you copy the iTunes folder make sure you put it into the same location on the new computer. This has to be the exact same place, on a Mac this would be in Username/Music/. When you open iTunes on the new computer it will be the same as on the original one Songs, Playlists, Play Counts, Ratings etc. When I moved iTunes a while ago for my daughter I was also using the same version of iTunes, not sure how important that is but it's probably worth keeping them the same.

Transfering files from old mac to new mac

I just bought a iMac G5 and started it up and it asked if I wanted to transfer files from my old mac. I selected yes. And it began transferring. It looked like everything was going fine until I checked on it about 30 minutes later and it looked like it hadn't progressed at all. I checked on it another 30 minutes later and it said 1 hour 6 minutes remaining and hasn't moved since. I don't understand why it's not going further. And it's taking forever! Am I just too impatient. I'm transferring 5GB from my old PowerPC G4 mac using a firewire cable. Any help is much appreciated. I have no idea why it's not working.

A couple of other things to consider Emille,
1. Make sure your data is really going through the firewire cable and not a wireless network. Going through an ethernet or firewire cable would be much faster. It may have been possible that even though you had a cable connected, It may have tried to do it wirelessly anyway.
2. Were either of them going to sleep?
3. Make sure no other firewire devices are plugged in.
Joe

Creating a new user account and transferring files from old account

I am now having more problems than I can handle with my Leopard installation...problems such as applications that refuse quit no matter what ~ even after attempting force quit them and/or attempting to "sudo kill -9 PID", and now that I am having problems with Adobe Lightroom not even being able to remain open on my user account for more than 10 seconds max before it crashes without provocation (yet runs fine on a troubleshooting account I created on the same machine), I would now like to create a new user account on my MacPro Leopard 10.5.6 and transfer my files from the previous (problematic) user account, but I've never done so in the past...
Can someone give me a basic rundown of how to go about doing this as a means of troubleshooting my current sickly user account (and if you could also please let me know which files I should avoid restoring to the newly created user account so that I don't screw that one up as well, I would appreciate it)
Any suggestions would be greatly appreciated... Thanks!

While logged into the troubleshooting account (assuming that it's an admin account—if not create a new one and log into it), backup the bad account's folder, delete the bad account, selecting the save data option (which is stored in /Users/Deleted Users/ as a disk image), recreate the bad account using the same username/password combo, log out and back into the recreated original account. If the problem's solved, open the saved data dmg file in /Users/Deleted Users/, open the /Library/Preferences/ folder from the saved data, open the current /Users/restored account/Library/Preferences/ folder, and slowly copy plist files from the saved data folder to the current one that don't exist in it. Log out and back in to ensure there's no conflict and things still work correctly. Resolving conflicts or identifying corrupt plist files is a laborious process. Good luck.
See http://discussions.apple.com/thread.jspa?messageID=4703015 for more details on this process.

Transferring files from old iMac

Hey,
I just did the transfer via firewire of my old files from my old iMac to my new macbook.
I want to scrap everything that came in.
Wish I hadnt done it. Is there any sort of "undo" feature?
should I trash everything on the harddrive and reinstall with the discs that came with the macbook?
thanks!

1. Insert the Mac OS X Install Disc and double-click the Install Mac OS X icon.
2. Follow the onscreen instructions. In the panel where you select the destination disk, select your current Mac OS X disk (in most cases, it will be the only one available).
3. Click Options. If you want to save your existing files, users, and network settings, select "Archive and Install," then select "Preserve Users and Network Settings." If you want to erase everything on your computer and reinstall Mac OS X, select "Erase and Install." You can't recover erased data.
4. Click Continue.
5. Click Customize to select which parts of Mac OS X you'd like to install, or click Install to perform a basic installation (recommended).
-Bmer
Mac Owners Support Group
Join Us @ MacOSG.com
 An Apple User Group 
ITMS: MacOSG Podcast

Reoccuring HANGING problem with transferring files from old MACBOOK

ok, so I recently bought a iMac and i wanted to transfer my music and photo files from my older (waterdamaged a while back but still works fine) macbook. I've tried basically every method to try and get this done.
I've tried migration assistant, transferring the files through a shared wireless network, through firewire/disk target mode, but all of those methods i tried resulted in hanging very early on in the transferring and copying operation.
I believe it must have something to do with my macbook's hard drive, but i have no idea what to do at this point. Could someone please help me?

the thing is tho, the hard drive had no problems copying and transferring for over a year after the damage, while i continued to use it. I don't a reason why it wouldn't work now when i finally want to move a larger number of files at once (itunes music folder, iphoto library)

Transferring files from old Beige G3 machine to new G5 Dual Core (10.4.3)

Similar Messages

Maybe you are looking for