Transferring over billion records to flat file destination.
I have a requirement, where i need to create a flat file which loads over billion records in it. Can you please suggest me the best way to follow?
Thank you in advance!
SSIS or even SQLBulkcopy class. Make sure your have plenty space on the disk...
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence
Similar Messages
-
hi
i am adding new field to my existing package which is char(10).
getting this error:
[Flat File Destination [139]] Error: Data conversion failed. The data conversion for column "MEMBER_ID" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".
i right click flat file destination->i only see external and input column over there,
there is no output column.
in flat file connection mamanger ->outputcolumn->its char(10)
what needs to be change here?Hi coool_sweet,
According to your description, you are trying to add a new source column to a flat file in an existing package.
Based on the error message, the issue should be caused by text was truncated when load new column to column "Column1" in Flat File Destination. Because the length of new column data should be more than 10 (with some junk values) in the Source,
while you are trying to convert the column to 10 as the character length.
To fix this issue, we can increase the length of column "Column1" in Flat File Connection Manager. Alternatively, if you still want to convert the new column to a column with length 10, we can right-click the Source component to select “Show Advanced
Editor”, then go to tab 'input and output properties' to expand the output column corresponds to the column "Column1", change TrancationRowDiposition property to RD_IgnoreFailure.
Besides, the issue can also be caused by using some special characters in the new column. We can check the Unicode checkbox on the right hand side of Locale property in Flat File Connection Manager to fix this issue. For more details, please see the following
thread:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/d3605656-4a13-47b6-b96e-45379e2b2a9f/export-to-flat-file-with-unicode-chinese-characters?forum=sqlintegrationservices
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Header in flat file destination (ssis)
Hi
I am creating a header in the flat file destination which has some hard coded values and record count which will get its value from a variable assisgned to a row count transformation in the package.
There is no problem in hard coded value but when i try to get the value of record count, i always get zero.
This is how i am doing it.
In the flat file destination, when we open flat file destination editor, i hard code the values which i want in the HEADER itself right there in the editor.
For the record count, i go properties of the flat file and select expression. In the expression editor, in property, i am selecting 'HeaderRowDelimiter' and drag that variable in the expression box.
Let me know if there is any suggestion.
ThanksThe value of the rowcount is only known AFTER the Data Flow Task is completely finished... and there header is writen before that.
Here are some examples:
http://agilebi.com/jwelch/2008/02/08/adding-headers-and-footers-to-flat-files/
http://social.msdn.microsoft.com/Search/en-US/sqlserver?query=add%20header%20and%20footer%20ssis&rq=meta:Search.MSForums.ForumID(00e50af7-5f43-43ad-af05-d98b73c1f760)+site:microsoft.com&rn=SQL+Server+Integration+Services+Forum
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com -
I am using SSIS to extract fixed width data into a flat file destination and I keep getting below error. I have tried almost everything in this forum but still no solution. can anyone help me out to solve this problem.
[Flat File Destination [220]] Error: Failed to write out column name for column "Column 2".
[SSIS.Pipeline] Error: component "Flat File Destination" (220) failed the pre-execute phase and returned error code 0xC0202095
ThanksHi Giss68,
Could you check the Advanced tab of the Flat File Connection Manager to see whether the InputColumnWidth and the OutputColumnWidth properties of the Column2 has the same value? Please refer to the following link about the same topic:
http://stackoverflow.com/questions/10292091/how-do-i-fix-failed-to-write-error-while-exporting-data-to-ragged-right-flat-fil
If it doesn’t work, please post the sample data and the advanced settings of Column2 for further analysis.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support -
Dynamic Column Names in Flat File Destination
Hello,
Inside a Data Flow Task, I have an ADO.Net data source which executes a stored procedure that provides results in 5 columns.
The requirement is to have it connect to a flat file destination, such that the column names is dependent on what data was pulled by the data source. There is a variable indicator which identifies the data that was pulled. For example:
If the indicator is 0, then the columns names will be A,B,C,D,E. Otherwise, if the indicator is 1, then column names will be V,W,X,Y,Z.
Any suggestions will be of great help.
AJIf you only have two variations then use a branched execution (based on precedence constraints) and direct it to one DFT or another based on the result returned by the stored procedure.
Otherwise use .net
code to create one package or another dynamically.
PS: I suggest not to bother using SSIS for such a simplistic scenario.
Arthur My Blog -
Flat File Destination Multiple Delimiters
Hi Guys,
This might been an easy one for you. I need to find out if the data from a table can be loaded into a text file with multiple delimiters or not using SSIS? For example, if I have 2 columns of data from a table,
ID Name
100 Mark
I need to load this into a flat file and the output should be like this
100,@Mark
So basically, I need to have 2 delimiters in the flat file destination namely "," and "@". How can this be done.
Thanks in advance.Can't you just fill in two delimiters in the Column Delimiter field of the Flat File Connection Manager (never tried it)?
Alternatives:
-In the source query add a @ to the second column: select column1,
'@' + column2 as column2 from yourTable
-Add a Derived Column with an expression that adds a @ in front of column2: "@" + [column2]
Please mark the post as answered if it answers your question | My SSIS Blog:
http://microsoft-ssis.blogspot.com |
Twitter -
Flat file Destination VS Raw file Destination ??
Team ,
Can some help me understand few differences and similarities between Flat File Destination and Raw File Destination ? Thanks in advance .
Rajkumar YeluguHi,
Please check these differences :-
Flat File Destination: The Flat File Destination component writes data out to a text file in one of the standard flat-file formats: delimited, fixed width, fixed width with row delimiter.
Raw File Destination: The Raw File Destination is all about raw speed. It is an entirely native format and can be exported and imported more rapidly than any other connection type, in part because the data doesn’t need to pass through a connection
manager.
durgesh sharma -
Reorder columns in Flat File Destination
Hi Friend's
Although, I did some google in order to find the solution for reording the columns before exporting to a text file using FLAT FILE DESTINATION, one of the work around which i found is editing the final package xml file and moving the DTS:FlatFileColumn
fields as required.
Is there any other solution in order to avoid this approach as I have some 40 fields to be displayed in text file and manually reordring these fields in xml would be cumbersome.
I need to create text file using FLAT FILE DESTINATION.SSIS Data flow doesn't support dynamic metadata, and any changes in metadata like re-arrange mappings should be done manually. if you want to have columns in a re-arrange design which could be re-mapped dynamically and simply it is better to looks for
another way than data flow task, dynamic t-sql queries can be good alternative.
http://www.rad.pasfu.com
My Submitted sessions at sqlbits.com -
Dynamic Header Values in Flat File Destination
Hi,
I have to put 'T' or 'P' as part of a header in a flat file destination. The header is sourced via a work table which defines what the header looks like. One of the columns should contain 'T' for test or 'P' for production. When the package is executed in
the test environment, 'T' should appear as part of the header. When the package is executed in the production environment, 'P' should appear as part of the header.
Any ideas on how to achieve this is very much welcome.
Thanks,
AJPackage parameter indicating the environment and a DerivedColumn transform that generates a column with T or P depending on the parameter value.
-
FM for reading total record in flat file
Hi,
Do we any function module which can tell me about number of record in flat file.
I want only FM name!!
Thanks for your reply!! but File is only there in Application server.
Thanks in advance.
Message was edited by: Vipin NagpalHi,
then you need to call the unix command (if your application server is Unix)
<b>wc -l fielname</b>
data: unixcom like rlgrap-filename.
unixcom = 'wc -l fielname'
data: begin of tabl occurs 500,
line(400),
end of tabl.
data: lines type i.
call 'SYSTEM' id 'COMMAND' field unixcom
id 'TAB' field tabl[].
loop at tabl.
write:/01 tabl-line.
endloop.
Regards
vijay -
Creating BOM using BDC :How to display no of records from flat file under
Hi,
How to display no of records from flat file under one (Alternative BOM) vertically.
When i execute, the records are replacing one by one.
Here my coding:
report ZBOM1
no standard page heading line-size 255.
*include bdcrecx1.
DATA: BEGIN OF bdc OCCURS 0,
matnr(18),
werks(4),
stlan(1),
END OF BDC.
DATA: BEGIN OF BDC1 OCCURS 0,
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
END OF bdc1.
DATA: BEGIN OF BDCDATA OCCURS 0,
matnr(18),
werks(4),
stlan(1),
idnrk(18),
MENGE(18),
MEINS(3),
postp(1),
posnr(4),
END OF BDCDATA.
data: ibdcdata type standard table of bdcdata WITH HEADER LINE.
*start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = 'C:\Documents and Settings\dilipkumar.b\Desktop\soft.txt'
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = ','
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
VIRUS_SCAN_PROFILE =
NO_AUTH_CHECK = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = BDCDATA
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*perform open_group.
loop at bdcdata.
perform bdc_dynpro using 'SAPLCSDI' '0100'.
perform bdc_field using 'BDC_CURSOR'
'RC29N-STLAN'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29N-MATNR'
'SOFTDRINKS'.
perform bdc_field using 'RC29N-WERKS'
'WIND'.
perform bdc_field using 'RC29N-STLAN'
'1'.
perform bdc_field using 'RC29N-DATUV'
'16.09.2008'.
perform bdc_dynpro using 'SAPLCSDI' '0110'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'RC29K-BMENG'
'1'.
perform bdc_field using 'RC29K-STLST'
'1'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-EXSTL'.
perform bdc_dynpro using 'SAPLCSDI' '0111'.
perform bdc_field using 'BDC_CURSOR'
'RC29K-LABOR'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_dynpro using 'SAPLCSDI' '0140'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSTP(01)'.
perform bdc_field using 'BDC_OKCODE'
'=FCBU'.
perform bdc_field using 'RC29P-IDNRK(01)'
BDCDATA-IDNRK.
perform bdc_field using 'RC29P-MENGE(01)'
BDCDATA-MENGE.
perform bdc_field using 'RC29P-MEINS(01)'
BDCDATA-MEINS.
perform bdc_field using 'RC29P-POSTP(01)'
BDCDATA-POSTP.
perform bdc_dynpro using 'SAPLCSDI' '0130'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POSNR'.
perform bdc_field using 'RC29P-POSNR'
BDCDATA-POSNR. "'0010'.
perform bdc_field using 'RC29P-IDNRK'
BDCDATA-IDNRK. "'15'.
perform bdc_field using 'RC29P-MENGE'
BDCDATA-MENGE. "'1'.
perform bdc_field using 'RC29P-MEINS'
BDCDATA-MEINS. "'ml'.
perform bdc_dynpro using 'SAPLCSDI' '0131'.
perform bdc_field using 'BDC_OKCODE'
'/00'.
perform bdc_field using 'BDC_CURSOR'
'RC29P-POTX1'.
perform bdc_field using 'RC29P-SANKA'
'X'.
*perform bdc_transaction using 'CS01'.
*perform close_group.
CALL TRANSACTION 'CS01' USING IBDCDATA MODE 'A' UPDATE 'S'.
REFRESH IBDCDATA.
endloop.
Start new screen *
FORM BDC_DYNPRO USING PROGRAM DYNPRO.
CLEAR iBDCDATA.
iBDCDATA-PROGRAM = PROGRAM.
iBDCDATA-DYNPRO = DYNPRO.
iBDCDATA-DYNBEGIN = 'X'.
APPEND ibDCDATA .
ENDFORM.
Insert field *
FORM BDC_FIELD USING FNAM FVAL.
IF FVAL <> NODATA.
CLEAR iBDCDATA.
iBDCDATA-FNAM = FNAM.
iBDCDATA-FVAL = FVAL.
APPEND iBDCDATA .
ENDIF.
ENDFORM.Hi,
the BDCDATA structure must be fnam, fval,dynbegin,dynpro,program.
You have to declare like this and pass this in your CALL TRANSACTION statement.
Please give some other table name for BDCDATA you declared for and also for IBDCDATA. -
How to create a dynamic SSIS package for multiple flat file destinations
Hi,
I have to create a ssis package which has single data flow task and inside that I have 23 source (sql- select * from - statements)- destination (flat files, 23 distinct) connection.
Now for each product I have to create separate SSIS package (i.e. if prod=abc then these read select * from abc_tables and 23 abc_ txt files)
I want to do it dynamically, means only single package and inside that variables will take select * values for each source-dest connection (so i believe 23 variables) and same for destination flat files.
Let me know. :)
ANK HIT - if reply helps, please mark it as ANSWER or helpful postSorry It seems you're contradicting yourself. you say I know my source and dest structure and the you're
asking all I want is to have a dynamic structure
what does that mean?
and reading your next sentence
I want to run a package for 5 products, instead of creating 5 ssis packages with 23 source- dest connection, I would
like to have one with only 23 source- dest connections
What I feel is what you're looking for is to have a looping structure to loop through each of the 5
products.
In that case what you could do is this
1. Create a object variable in SSIS
2. Use a Execute SQL Task to populate the variable with all available products (I think you'll have a master table for that). Set ResultSet property to Full ResultSet and then in ResultSet tab map Object variable to 0 th index
3. use a ForEachLoop container with ADO .NET recordset enumerator and map to object variable. Create a variable of datatype same as that of Product identifier field to get individual values out
4. Inside loop create your data flow task with 23 source destination connection. In the query part use a parameter for product field and map it to the variable containing product value to get only data for the product.
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs -
Flat File Destination: Broken Rows
I am exporting data to a csv file. One of the columns has values with so mixed characters which end up confusing the system and breaking the rows before the real end of the row. What I mean is; on the flat file a resultant single row can be broken down into
two or more rows as a result of the characters in the offending column. I work for the healthcare industry. Please see the example of what I’m talking about below. This is a real value from one of the rows in my table which I have and this value(amongst many
more under tis column) is causing the affected row to be split into two rows. Where the letters
OE: is coming up as a new row on my flat file. I want all this to be in the same row. My column delimiter is double dagger and my row delimiter is {CR}{LF}
Example value:
Column name: Comments
Value:
BIBA: blah blah,
accidentally
kicked
brick
wall
to
lateral
aspect
to
R
foot.
reports
hearing
a
crack.
mobilised
after
injury.
pain
++
swelling
+
nil
obvious
deformity.
minimal
movement
of
the
toes.
LAS
obs:
entonox
to
good
affect
RR18 98%air
P66reg 114/75
5.3mmols
T36.8
pain 8-4/10
PMH:
Nil
Allergies-
nuts&prawns
OE:
swelling
and
pain
to
lateral
and
medial
malleolus
and 5th
metatarsals.
For
xray
MpumeleloI think I have managed to get a solution to my problem.
Instead of using csv file I have decided to use text file as my destination flat file format when exporting the data
I have used Tab{t} as my column delimiter
I have left the default system specified {CR}{LF} for row delimiter
On my flat file connection manager, I have gone to the properties and changed
AlwaysCheckForRowDelimiters from True to False.
After a good fight the above worked. No more broken or split rows :).
If anyone has a better approach or suggestion it will be gladly welcome.
Many thanks,
Mpumelelo -
SSIS Script Component Conditional Split to Flat File Destination
I have a flat file which needs to be split into multiple flat files based on value in RecordType column.
For example, if (RecordType == 20), then direct all rows to a new text file,
I have around 15 different record types. I have managed to write some C# code for Conditional Split, but
still trying to figure out what is the next step to save these rows to a text file.
I will be grateful if someone please point me to the right direction.
Many Thanks
#region Namespaces
using System;
using System.Data;
using Microsoft.SqlServer.Dts.Pipeline.Wrapper;
using Microsoft.SqlServer.Dts.Runtime.Wrapper;
using System.IO;
#endregion
[Microsoft.SqlServer.Dts.Pipeline.SSISScriptComponentEntryPointAttribute]
public class ScriptMain : UserComponent
string copiedAddressFile;
private StreamWriter textWriter;
private string columnDelimiter = ",";
private string filepath = @"C:\DestFiles";
private string[] columns;
public override void PreExecute()
IDTSInput100 input = ComponentMetaData.InputCollection[0];
columns = new string[input.InputColumnCollection.Count];
for (int i = 0; i < input.InputColumnCollection.Count; i++)
columns[i] = input.InputColumnCollection[i].Name;
public override void Input0_ProcessInputRow(Input0Buffer Row)
if (Row.intRecordType ==20)
Row.DirectRowToRecordType20();
else if (Row.intRecordType ==10)
Row.DirectRowToRecordType10();see similar example
http://www.sqlis.com/sqlis/post/Using-the-Script-Component-as-a-Conditional-Split.aspx
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page -
Reg: how to count no.of records in flat file
Hi,
Very god morning to all, i faced a one problem like this, i am new to jython code.my problem is i want count the no.of records flat file before loading to the table, is there any easiest way to count the number records in file rather than jython ?
please share immediately.
Regards,
shHi actdi,
Thanks for giving reply, i am working in windows environment, and my previous project developers use the coding like
below:
filesrc = open('#filename','r')
first=filesrc.readline()
lines = 0
while first:
lines+=1
first=filesrc.readline()
s1=str(lines)
s2= ' in the file ------'
s3='#filename'
final = s1 + s2 + s3
raise ' \n\n The Number of Lines in the File are ---' , final
see this code they are wrote in a procedure but i have a doubt with this , where it finally stores the row count.
Kindly share if u have any solutions reg this in windows env.
Regards,
sh.
Maybe you are looking for
-
Years and years ago when I paid for an email address with mac.com I opened my itunes account and all. After getting tired of paying for an email account I made a new one, which I can't remember but I thought I changed it, but obviously the .mac stay
-
Without any warning, my Mail, Address Book, and Safari programs are completely different than before. No bookmarks, no addresses, etc. I was using the new beta version of Yahoo! Messenger, and I also renamed my computer, but I've searched everywhere
-
Over the last few days, my wife's iMac C2D (currently with OS 10.4.10) started reading the time stamps on our camera's AVI videos wrong. When the import screen comes up, the time stamp on all the pictures are correct, but the time stamp for the video
-
Where in memory is interanl table stored
Hi, I have recorded BDC for SAP transaction VCC1 which involves clicking multiple buttons and finally clicking print button, setting the print timing to send to spool(not print immediately). The printing recording does not work as BDC does not s
-
Can't update to FCPX 10.0.1
I bought FCPX 10.0 on day one. Now I want to update to 10.0.1 - but the Mac App Store doesn't let me. 1. It's not even listed as an update under "updates". 2. When goin to the "purchased" list it says "Install", and when "Install" is clicked, App Sto