Transition effect. Help to understand

Hi! please show me how to achieve this effect here as in the picture? he is in the trailer in iMovie "Family".

Luis Sequeira1 wrote:
I don't understand what you mean by "this effect". What I see in your screenshot looks like a "placeholder",...
.. I had a look in that Trailer-template in iMovie:
There are indeed several 'effect transitions' in that 'Family'-trailer.
Unfortunately, I can not locate the specific point, Sergej marked in his screenshot..
my iMovie-Familiy-Trailer-template doesn' t offer 2 clips with 0.9/1.4sec length....
@Sergej:
Use iMovie, add any content, and share THAT specfic point in the timeline with us, so we can follow which one you mean.

Similar Messages

Please Help.Transition effects between scenes.

Hello,
I am simulating an Ipad device in flash CS6, with AS3, and I have made one scene for the desktop (with all the app icons) and another scene for each app.
I'm using buttons to navigate between apps (each app icon is a button), and made another button for the Ipad home button to go back to desktop.
By the way , I'm using this code for the buttons;
          btn_music.addEventListener(MouseEvent.CLICK, abrerep);
          function abrerep (event:MouseEvent):void {
          gotoAndStop("1","Reproductor");
It works fine , but I would like to add a transition effect (like a fade out, or something similar to what ipad actually do) when you open an app or go back to desktop (change scene).
Any advice on how to do this?!!
I apreciate your help, thanks in advance.
PD: Also I would like to simulate a web browser app (like safari), that when you open it, it goes to a web site, for example www.apple.com
Any Ideas to this??

Doing trransitions along a timeline using scenes is not very designer-friendly. You are better off avoiding the using of frames and even the timeline. Just have each section as a movieclip in one frame and control the visibility of each. Then you can use Actionscript to fade things in and/or out as needed, while having the benefit of easily retaining the states of sections already visited. You should be able to convert each scene into a movieclip by copying the timeline into a movieclip.

Dreamweaver Help | CSS3 transition effects

This question was posted in response to the following article: http://helpx.adobe.com/dreamweaver/using/css3-transition-effects.html

Actually, dmello is correct. Dreamweaver did have a JavaScript-based Timeline panel. If I remember correctly, it was removed in Dreamweaver 8 (or maybe CS3), but there was such an outcry, an updater was issued to reinstate it. However, the code was so ancient, the Timeline panel was permanently removed in Dreamweaver CS4.
Edge Animate is much more powerful. What's more, you could get a perpetual license to version 1.0 of Edge Animate even with a free Creative Cloud account. I'm not sure if that offer is still available because the current version of Edge Animate is now 1.5, but it's worth checking if you don't have a full Creative Cloud account and you're looking for a replacement for the Timeline panel. Of course, with a full Creative Cloud subscription, you get the latest version of Edge Animate and any future updates.

Third party Flash transition effects

Can third party transition effects be used in Catalyst?

The effect code would not be accessible to Catalyst. You can use Flash Profession to animate the item with the effect you want, then import that swf into Flash Catalyst. FC does allow you to play and stop a swf.
The imported swf should be published with player 10.1 as the target.
Hope this helps,

DVD Menu Transition Effects

I have successfully created a motion graphic DVD menu in AE, which I have rendered to be authored in Encore. The theme is horror/thriller with thriller theme for the BG music. There are two(2) selecitons on the main menu:
Play Movie Bonus Features
When the user chooses Play Movie, I would like a transition effect leading to the main video to be played. And maybe a different transition effect when the user selects Bonus Features before getting into the submenu of bonus features.
Can anyone sugguest any resources (e.g., books, manuals, blogs, video resources, courses, etc.) that can provide a tutorial on how to perform the procedure(s) in AE and EN?
Your assistance would be highly appreciated.
Montgal_NYC

The ones I am seeing are not for transitions specifically - quite a few bad links. And the ones I see may be for older versions.
http://tv.adobe.com/watch/learn-encore-cs4/creating-encore-menus-with-after-effects/
http://tv.adobe.com/watch/adobe-beginner-classes-with-dennis-radeke/episode-35-authoring-i n-encore-and-animating-a-menu-in-after-effects/
The regular help files may be instructive. But note that the links to videos do not go to the actual videos.
Encore help:
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
After Effects help:
http://help.adobe.com/en_US/AfterEffects/9.0/WS3878526689cb91655866c1103906c6dea-7e45a.htm l

Keynote '09: 2 transition effects per slide initiated by 2 hyperlinks?

I want to do a flip book. So far it looks great.
I'm using forward and back hyperlinks to transition b/w slides.
Problem: I can only get one style of transition effects/slide, so when I flip back to a previous slide the flip animation looks like I'm flipping forward.
Any help on this would be greatly appreciated.

Ok... After more scouring, I found this thread: https://discussions.apple.com/thread/2355380?start=0&tstart=0
Which had this part buried in it:
Remove the navigation (rip out the hyperlinks), set the presentation to run as a Normal Presentation, then Share>QuickTime>Fixed Timing. That's right, I said Fixed Timing. Turns out me and a lot of other people (and yes, some tier 1 support folk at Apple) misunderstood Fixed Timing. Fixed Timing lets a Normal presentation run with the audio and moves on to the next slide when the audio is finished - which is exactly what I wanted (the QuickTime controls automatically appear after the movie is rendered). Slide Duration is actually the delay between slides so set this to 1 second and Build Duration affects the timing of the Builds, but I also set this to 1 second since it was destined for web delivery (bandwidth!).
I struck thru the first part b/c that wasn't relevant to my issue, BUT... what WAS relevant was removing all of my carefully timed slide delay transitions, then using the above method. It worked flawlessly, as far as I can tell. It seems without documentation or help of any kind (that I could find) no one, even Apple support staff, knows what the true function of Fixed Timing is supposed to be. So hopefully, if someone else stumbles across this post, they'll be able to do the right thing, from the start and not waste hours with expensive or additional programs and work arounds.
Follow the above method and still get your timed HD quality Quicktime .mov.

Trying to make Tile Transition Effect a rollover effect

Hello all-
I'm a newbie to AS3 and I'm hoping someone can help me. I am trying to make the Tile Transition Effect, from flash-filter.net, into a rollover effect. I originally began working off of the 3D Cube Rollover Transition script and I was able to get the rollover part to work but as soon as the first transition is done I get this error message:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at net.flashfilter.as3.effects.tileflip::TileFlip3D/processFrame()
at net.flashfilter.as3::PaperBase/onRenderFrame()
I realize that the error itself means that I am trying to call something that is not instantiated yet, but I am unsure where my code is wrong, and I am also unclear on what the 2nd and 3rd lines mean. Here is the code:
btn.addEventListener(MouseEvent.ROLL_OVER, _onOver);
btn.addEventListener(MouseEvent.ROLL_OUT, _onOut);
var running = false;
var goIn = false;
var goOut = false;
function _onOver(e:MouseEvent){
if(!running){
_createAnimation("in");
running = true;
}else{
goIn = false;
goOut = true;
function _onOut(e:MouseEvent){
if(!running){
_createAnimation("out");
running = true;
}else{
goIn = true;
goOut = false;
function _inAnimationDone(e:Event){
e.target.removeFilter();
img1.visible = false;
if(goIn){
_createAnimation("out");
}else{
running = false;
goOut = false;
function _outAnimationDone(e:Event){
e.target.removeFilter();
img2.visible = false;
if(goOut){
_createAnimation("in");
}else{
running = false;
goIn = false;
function _createAnimation(dir:String){
var myFilter:TileTransitionEffectAS3 = new TileTransitionEffectAS3();
myFilter.mouseEnabled = false;
myFilter.mouseChildren = false;
addChild(myFilter);
if(dir == "in"){
myFilter.init(img1, img2, 10, 20, 40, 40, "Mode7", "l->r");
myFilter.addEventListener(TileTransitionEffectAS3.ANIMATION_DONE, _inAnimationDone);
}else if(dir == "out"){
myFilter.init(img2, img1, 10, 20, 40, 40, "Mode7", "r->l");
myFilter.addEventListener(TileTransitionEffectAS3.ANIMATION_DONE, _outAnimationDone);
Thanks in advance to anyone that might be able to shed some light on the situation!

I'm assuming that you want to do something like the push into all of the stills. There's no real trick, there is just a bunch of work. You have to distribute your layers in 3D space and animate the camera. I'd suggest you start with simple moves with just 3 or 4 layers. Get that right, then start adding layers until you've achieved the complexity you desire.
If I had the artwork and were to try and match the camera move that happens around 7 seconds I'd budget about a half hour. The move from 15 seconds to about 18 seconds is mostly a single setup repeated 3 times. Something that complex would take me about an hour and a half but it could easily take all day, depending on the images needed and whether or not I had to do a bunch of resizing to complete the project.
The other option would be to use the Card Dance plug-in. Card Dance is a complex plug-in that requires some training to use. To learn more type card dance into the search field in AE and look at the training materials. The move on the red layer with all the squares at about 1:47 could be created quite quickly with Card Dance.

Menu transition effects, Animations ?

does transition effects , animations etc come along with a theme ? or is it fp2 dependant alone ?
i mean, i have an fp2 device, 5730XM, but i cannot seem to get all of the transition effects Nseries phones have. Yes they are animated but not completel as it is in, for instance, N79. And yes i've turned on the theme effects.
Thanks

AFAIK stock nokia themes are locked to the firmware updates each phone recieves. Basically each single phone as a peculiar stock theme which it receives embedded in the firmware updates. For example, the 5800 NE has a special default theme which is different from the default theme of the 5800 XM. Now, it may be possible to make a theme using one of the various theme making software out there with theme animation effects. So basically you need to find such a software which supports those effects you are talking about.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Help with understanding initial admin account vs. directory admin

Hello,
I am hoping someone can help me understand the initial admin account created when I was first configuring my server, and the directory admin.
I have setup an advanced server, and when I was going through the initial setup I created an account that for this discussion I'll call "admin." Once the initial setup was finished I started using Workgroup manager to create accounts. I was informed that I should create a different directory admin so I did and for this discussion we'll call that account "diradmin."
I am curious why the initial account of admin does not show up in workgroup manager, and why it does not show up as an option in Server Admin to assign permissions.
Is this making any sense?
Any explanation is greatly appreciated.
Thank you,
Scott

Hi
Presumably you used the Server Setup Assistant to configure Services prior to bringing the Server online?
Not a good idea really. When choosing Advanced after the Server Software has been installed don't enable/configure any service apart from Remote Desktop. Once the Server setup is complete run all available updates. Once you've done that begin to configure required Services using Server Admin. Once you've done that begin to populate your directory nodes with users using WorkGroup Manager.
The key to understanding the two accounts (a) System Administrator (admin UID 501) and (b) Directory Administrator (diradmin UID 100) is understanding which directory node you want to provide services to. The 'Local' node and the server in general (putting aside the super user 'root') will always be admin. Once you promote the Server from Standalone to OD Master you effectively create another Directory in addition to the Local one. This LDAP Directory can be used for all sorts of things. Principally enabling directory and contact information (amongst other things) to be shared/accessed with users that exist in that node with an enhanced authentication system (Kerberos) not available in the Local node and if the Server is in a Standalone Role. This LDAP Directory is controlled by diradmin. You won't be able to use admin for the LDAP node but you can use diradmin for the server in general - although I would not advise it. You can use root for both nodes - again I would not advise it unless absolutely necessary. Basically use admin to log into the Server and do the day to day stuff and use diradmin for the LDAP. Get into the habit of never having both applications open unless you are going to use them. Once you are done, quit out of them and leave them alone.
To toggle between the two Directory nodes launch Workgroup Manager and click on the small blue globe below the main set of icons at the top and above the Users/Groups/Machines tabs. You should see at least 4 selections: Local, /LDAPv3/127.0.0.1, Search Policy and Other. If you don't see /LDAPv3/127.0.0.1 select Other and browse for it. If you still don't see it then you effectively don't have an OD Master. This will severely limit the ability of server to provide auot-mounting networked home folders as well as access to iCal Server's features amongst other things.
Finally if you truly want LDAP and everything that goes with it then your DNS Service - wherever its placed - has to be correctly conigured and tested. This link is for a post that explains how to achieve this simply using the interface:
http://discussions.apple.com/thread.jspa?threadID=1251475&tstart=45
Depending on your network environment it might not be appropriate for you? However stick with it as it is a long post and you may find it useful?
Tony

Page transitions effects

I've looked around a lot, but I have not been able to find
any tutorial explicitly going over just how to design transition
effects between pages (i.e., the effect through which the Home page
loads, and how to smoothly dissapear its content when the viewer
clicks to go to a different page, and the same thing for all pages
basically).
I've learned the basics of motion and shape tweening, as well
as masking (using tweens), and some basic actionscript, however,
with various content on my pages it does not allow me to do a
mask/tween nor is it at all a practical solution for my specific
problem: again, I want the pages to load up and dissapear smoothly
with some sort of effect. I have set the pages up using labels.
Any input, or link to a descent tutorial on the subject would
be greatly appreciated.
Chuck

Thanks for the posting.
While they're pretty terse, the InDesign Help files are pretty clear about whether things can be exported or not.
For example:
"Movies and sound clips you add to a document can be played when the document is exported to Adobe PDF or SWF, or when you export the document to XML and repurpose the tags." (Doesn't mention FLA files.)
or
"Page transitions display a decorative effect such as a dissolve or wipe when you’re turning pages in a document that is exported to SWF or PDF format. You can apply different transitions to different pages, or you can apply a single transition to all the pages. Page transitions are especially useful when you create a slideshow in PDF or SWF format." (Doesn't mention FLA files.)
or
"Animation effects let you make objects move in your exported SWF files. For example, you can apply a motion preset to an image that makes it appear to fly in from the left side of the screen while shrinking and spinning. Use the following tools and panels to animate documents." (Doesn't mention FLA files.)
But:
"When you export your InDesign document to FLA file format, you can open the file in Adobe Flash® CS5 Professional to edit the contents. Exporting to FLA in InDesign CS5 format replaces XFL export in InDesign CS4. Use the Flash authoring environment to edit or add video, audio, animation, and complex interactivity." (The last sentence says you should do those things in Flash Professional.)

Q ; add transition effects

hi-
I used Premiere Pro CC 2014
I would like to have more transition effects.
I did not find any community site.
Need to know the One who ever transition effects for additional services?
ps :
I'm hard to see the answer.
I would appreciate contact [email protected]

http://www.newbluefx.com/products/transitions
Adobe Premiere Pro Help | Plug-ins

Video transition effects

Hi,
Suddenly out of no where, when I click on two split video clips that are touching (on the same track), it no longer highlights the area to allow me to apply transitional effects... However, I can right click and it will give me "add cross dissolve".
I don't understand.. It's almost as if any edits after a certain point in the sequence will no longer allow me to select edit points for transitional effects-- But if I go back a few minutes on the time line, I can cut and add all the ones I want.. Is this a bug???
-patrick

Are you sure the clips are touching? Zoom into the timeline and make sure.
If they are, what happens when you just drag a transition from your transition effects bin and drop it on the cut point? Or what happens when you add a dissolve by right clicking on the cut point?
rh

Pictures transition effects

I want to apply transition effects to multiple pictures, I have found an activX,Xshow, but it's output is not picture frames, I need all frames
please HELP me
Solved!
Go to Solution.

You can use Create Mask and a little creativity to make a transition. I generate a "classic" transition between two pictures as an array of pictures. You can export the individual frames using the Picture pallete VIs if you wish.
Attachments:
source.llb ‏746 KB

Transition effects between the states..?

Hi, There.
How I can set the "Transition effects" between the states please?. When I add the different photos to the several states, I want to set the transition effects like "Fade". Help me anyone please.
Thanks

Try to make a few more transitional states in between with varying levels of opacity for each picture (and play with the State Delay time). Other than that, i don't think Fireworks has transitional effects for slideshows (i may be wrong).

Premiere Pro CS4 Loose transition effect after exporting.

Hey everyone. Still a little new to Pro, but have searched for an answer to this question with no luck. I have about a 4 minute project which consists of titles, still images and video and audio. I have 5 opening titles, each 3 seconds long. I have set the 'dip to black' transition effect between each of them. After exporting to media - Windows AVI, the effect is gone on just these clips. All other transitions work great. I am doing this on my Vista Ultimate Dual Core 1.8 GHz 32-bit PC with 3GB of RAM. I am exporing to NTSC DV.
I did try exporting the exact same project on my work laptop. Windows XP, 1.7GHz with 1GB of RAM and it worked just fine.
Any suggestions?
Thank you in advance.

The glow is best done with a plugin from trapcode called Shine. They also have an effect called sparkle which should accomplish the effect in your video example.
Shine is preetty much a standard plugin for AE or Pr. Its a bit overused though.
http://www.trapcode.com/products_shine.html
In fact I did a tutorial for Shine a while back. Maybe it will help. Though it was done on Pr ver 1; but the plugin works the same.
http://www.wrigleyvideo.com/videotutorial/tutdes_ppro_shine.htm

Can anyone help me understand "Continue Statements"?

Hi,
I was wondering if anyone could help me understand continue statements. I've been studying the java tutorials this weekend but can not get my head around the following explanation: (My thoughts are at the end of this message and it might be easiest to read them first!)
"The continue statement skips the current iteration of a for, while , or do-while loop. The unlabeled form skips to the end of the innermost loop's body and evaluates the boolean expression that controls the loop. The following program, ContinueDemo , steps through a String, counting the occurences of the letter "p". If the current character is not a p, the continue statement skips the rest of the loop and proceeds to the next character. If it is a "p", the program increments the letter count.
{code}class ContinueDemo {
public static void main(String[] args) {
String searchMe = "peter piper picked a peck of pickled peppers";
int max = searchMe.length();
int numPs = 0;
for (int i = 0; i < max; i++) {
//interested only in p's
if (searchMe.charAt(i) != 'p')
continue;
//process p's
numPs++;
System.out.println("Found " + numPs + " p's in the string.");
}{code}
Here is the output of this program:
Found 9 p's in the string.
To see this effect more clearly, try removing the continue statement and recompiling. When you run the program again, the count will be wrong, saying that it found 35 p's instead of 9.
A labeled continue statement skips the current iteration of an outer loop marked with the given label. The following example program, ContinueWithLabelDemo, uses nested loops to search for a substring within another string. Two nested loops are required: one to iterate over the substring and one to iterate over the string being searched. The following program, ContinueWithLabelDemo, uses the labeled form of continue to skip an iteration in the outer loop.
{code}class ContinueWithLabelDemo {
public static void main(String[] args) {
String searchMe = "Look for a substring in me";
String substring = "sub";
boolean foundIt = false;
int max = searchMe.length() - substring.length();
test:
for (int i = 0; i <= max; i++) {
int n = substring.length();
int j = i;
int k = 0;
while (n-- != 0) {
if (searchMe.charAt(j++)
!= substring.charAt(k++)) {
continue test;
foundIt = true;
break test;
System.out.println(foundIt ? "Found it" :
"Didn't find it");
}{code}
Here is the output from this program.
Found it"
Here are Woodie's thoughts........................................
1) With the first program I don't understand how the program counts the number of "p's". Like for example how it stores the number of "p's". Shouldn't it say:
if (searchMe.charAt(i) = 'p') then store it in some sort of containers??? 2) With the second program, I don't understand the test section. For example: Why does it have --? why does it have != after while and why does it have != after if?
while (n-- != 0)
                if (searchMe.charAt(j++) != substring.charAt(k++))
                    continue test;
            foundIt = true;
                 break test;Edited by: woodie_woodpeck on Nov 23, 2008 3:29 AM

Woodie, I think they're just silly "theoretical" examples... ergo don't worry too much not understanding them, coz they don't actually make a lot of sense... as you've allready pointed out there are other "more normal" control structures which achieve the same thing, and which in this case (in my humble opinion) would make for clearer, more concise, more maintainable code.
All you need to know about continue is "it means go back to the top of the loop"... If you're not comfortable using "continue" then don't.
There's more than one way to do it.
public static void main(String[] args) {
    try {
      final String s = "peter piper picked a peck of pickled peppers";
      int count = 0;
      for ( char c : s.toStringArray() ) {
        if (c=='p') count++;
      System.out.println("There are "+count+ " p's in '"+s+"'");
    } catch (Exception e) {
      e.printStackTrace();
}Having said all that... I did use continue in anger the other day... I was reading Geometries from a shape file... the reader was throwing an ArrayIndexOutOfBoundsException given an "empty Feature" (ie a feature with the geospatial presence)... All I did was catch the exception and continue trying to read the new feature... the alternative would have been to rewrite the control logic of the whole reader loop... quick, simple effective... but I don't routinely build continue statements into new code... just a matter of personal taste.
Cheers. Keith.

Transition effect. Help to understand

Similar Messages

Maybe you are looking for