Keynote '09: 2 transition effects per slide initiated by 2 hyperlinks?

I want to do a flip book. So far it looks great.
I'm using forward and back hyperlinks to transition b/w slides.
Problem: I can only get one style of transition effects/slide, so when I flip back to a previous slide the flip animation looks like I'm flipping forward.
Any help on this would be greatly appreciated.

Ok... After more scouring, I found this thread: https://discussions.apple.com/thread/2355380?start=0&tstart=0
Which had this part buried in it:
Remove the navigation (rip out the hyperlinks), set the presentation to run as a Normal Presentation, then Share>QuickTime>Fixed Timing. That's right, I said Fixed Timing. Turns out me and a lot of other people (and yes, some tier 1 support folk at Apple) misunderstood Fixed Timing. Fixed Timing lets a Normal presentation run with the audio and moves on to the next slide when the audio is finished - which is exactly what I wanted (the QuickTime controls automatically appear after the movie is rendered). Slide Duration is actually the delay between slides so set this to 1 second and Build Duration affects the timing of the Builds, but I also set this to 1 second since it was destined for web delivery (bandwidth!).
I struck thru the first part b/c that wasn't relevant to my issue, BUT... what WAS relevant was removing all of my carefully timed slide delay transitions, then using the above method. It worked flawlessly, as far as I can tell. It seems without documentation or help of any kind (that I could find) no one, even Apple support staff, knows what the true function of Fixed Timing is supposed to be. So hopefully, if someone else stumbles across this post, they'll be able to do the right thing, from the start and not waste hours with expensive or additional programs and work arounds.
Follow the above method and still get your timed HD quality Quicktime .mov.

Similar Messages

Keynote 3 - Bullet highlight transition effect

Hi everyone ..
I'm using Keynote 3 for a very important presentation to be given in a few days. One thing I like to use is the highlight transitioning effect when showing a list of bullets. However it seems to be somewhat arbitrary in when it lets me use that effect. Here's an example. I have a text box that is nothing but bullets .. K3 lets me use the "By highlighted bullet" delivery option on the Character Dissolve transition. So I then duplicate that field, and then try to apply the same transition effect, but instead, K3 only gives me "All at once" or "By paragraph" options .. it doesn't see that I'm still dealing with bullets.
How do I get the program to recognize that I want the bullet delivery options and not the paragraph ones?
Thanks in advance.
Craig
Power Macintosh G5 Mac OS X (10.4.6)

either stick to ONE text box (body) or do it manually by using one slide per bullet change and change the colors manually. Kinda of a pain, but doing it that way makes things easy to keep track of.

Is there a way to add a transition to every slide at once in Keynote for Ipad2

Is there a way to add a transition to every slide in Keynote on my IPAD 2? I've been doing each slide individually and it is taking too long!
thanks,

I solved the problem a couple days ago. The mistake I made was that I neglected to shut Firefox down before making the changes to persdict.dat. Once I did that, everything worked as I expected it to work after bringing Firefox up again. I guess that's the equivalent of what you suggested. Thanks for your response.

Disappearing transition effects

In new presentations one of the slide transition effects has disappeared from the drop down menu (Grid). When I copy paste a slide from an older presentation that does have Grid transition, it is back in the menu.
Anyone any ideas how this could have disappeared? I'm not sure exactly when this occurred but I'm pretty sure Grid was still there when I used Keynote v.3 for the first time after upgrading from v.2

Go to your preferences and turn on the obsolete transitions and builds.
We don't know why they are considered obsolete, but it lookks like Apple wanted to have only 25 in the list as a default. This will give you all the old ones.

Can you put multiple transitions on one slide??

I'm working on a storyboard for a iPhone app using MockApps templates. The whole presentation walks the user step by step on how my app will work. Its a interactive keynote where all the buttons have hyperlinks to the corresponding slides. Each of my slides has about 2 or 3 buttons each with a hyperlink pointing towards different slides. I figured out how to get the transitions from slide to slide. But is there a way to have a transition for the hyperlinks? So essentially I'll have three different transitions for three separate hyperlinks going to three different slides, but the three hyperlinks are in one slide.
It'll flow like this:
Slide 1 has three buttons, ButtonA ButtonB ButtonC (all buttons have been hyperlinked)
ButtonA takes you to Slide 2 using Perspective transition
ButtonB takes you to Slide 4 using Object Push transition
ButtonC takes you to Slide 7 using Revolve transition
Is that possible???
Thanks!

I suspect you'll need a custom question in that case. If there is only one correct answer, maybe you could try the Advanced Answer option that has a possible action.

What is happening in the most recent keynote when I click on a slide and it pulses (larger-smaller) Two of my slides have disappeared in the navigator although if I play through them they are there.

What is happening in the most recent keynote when I click on a slide and it pulses (larger-smaller) Two of my slides have disappeared in the navigator although if I play through them they are there and the slides have their orignal number--there are just white spaces where the slide should be and I can only get to the slide by clicking through from the prior slide. How do I get the sldies back into the navigator so I can see them. Oddly, they are show up just find on the light table.

Try removing any transitions or builds on these slides, or delete the slides then recreate them as fresh slides.
There are many playback anomalies in Keynote 6 which Apple have said they will be sorting out next year.

Cross-fade effect missing from transition effects

I used to export slide-shows from image folders with QuickTime, and on Tiger and PowerMac PPC G4 that worked fine choosing cross-fade transitions.
There was also the possibility to export slide-shows with Graphic Converter (using QuickTime effects), and the cross-fade transition was available.
Now, with Leopard and QuickTime 7.5 the cross-fade (aka dissolve transition) is missing from the transition effects. Is that a bug ? Is there a way to recover that transition effect ? I re-installed QuickTime, but that didn't changed things.
Thanks for any input...
N.

I still have my PowerMac G4 with all things installed, so I checked in QuickTime the slide-show export, and it doesn't have options for transitions in the effects. Oups !
So I guess it's only related to Graphic Converter 5.9.5 where in the transitions the cross-fade isn't available anymore when I upgraded to Leopard. Maybe I should upgrade Graphic Converter.
Anyway, thanks for the iPhoto tip, but I can't find where I can change the default settings...
N.

Aperture does not show all the transition effects in slideshow

Hello,
I am making my first slideshow in Aperture since I thought it would be better than iphoto.
Finding it not as intuitive as I expected, have to say.
I want to control how each transition between the slides works, but when I get the inspector ( and even that wouldn't appear - I had to troubleshoot it, reboot and change the displays then set up a dummy slideshow to even get that to appear ) - there is only two options on each slide - default and selected slide, and even then I can only change the background colour and the "photo effect" to black and white - the options that show on the manual are not there.
I thought it might be because I was still using the Trial Version of Aperture, so I changed libraries and import the slideshow - only 1 photo appeared and still no options to change anything. Try again ... ok, now the photos are there but I have the same options as before - i.e. none. I tried to change the theme to Ken Burns and NOW the options appear, but does that mean you can only change the slideshow options in this theme and none of the others?
And I also can't figure out how to import a video onto the end of the photo slideshow ... When I have the slideshow screen up, there is no other option availabale ( that I can see ) to impot a video .. I'm starting to think imovie is the only way to do this?
Can anyone suggest anything ??
Thanks,
M

You'll want to check the status of the delivery - if it's waiting interfaces, you could have an inventory interface issue or possibly interface trip stop hasn't run. You can also check the workflow of the particular line to see what step is is stuck at.

Only 1 hyperlink per slide works after exporting as QT movie

I'm trying to export a keynote presentation with several hyperlinks per slide as a quicktime move. Afterwards, only one hyperlink per slide will work????

Welcome to the discussions, betheljb.
The hyperlink that works, does it take you to the next slide?

Transition to next slide automatically at end of voice over clip

I have been trying to configure my Keynote 09 presentation so that each slide has it's own voice over audio clip. When the audio clip ends I would like to have the presentation move onto the next slide automatically. I cannot for the life of me find settings that tall the slide transition to take place when an audio clip ends.
I do not want to set a slide time to 8 seconds if the audio is 8 seconds. I update the audio too much to keep adjusting slide timings.
Can Keynote do this?
Thanks in advance for any suggestions

To the best of my knowledge, no.
Having said that, if it takes you 1 minute to re-record audio file and re-insert audio to KN, it takes you 2 seconds to change the transition time so not sure your grief is so dramatic. Have to inspectors visible when you are replacing audio. One inspector on QT to show time length one inspector on Slide to change the transitions. If it is to dramatic then *Apple Menu > Keynote Feedback…* and ask for a build option that detects media elapsed time / end time is best suggestion I can offer.

Any way to add transitions to multiple slides??

I just completed a 200 slide presentation which I imported into the iPad. At the time, I was not worried about slide transitions. I thought that once on the iPad, I could like on the mac, select a group of slides and add the same transition to all at once. I just tried on the iPad and it only added to one slide at a time!! Ugh!!
I had to make numerous changes to the slides once they hit the ipad for formatting, fonts, and so on so it's not practical to tweak on the mac then send back to the iPad.
Is there any way to add a transition to multiple slides at once on the iPad?
Thanks

Thanks, David, for your reply; the slides are all just basic dissolve transitions. nothing fancier, and dissolve is supported in both the transition and the build areas of keynote for ipad according to the help doc, which I had read, so this is why I am confused. I did originally create the document in keynote '08, but opened and saved it in '09, and then selected the slides, set dissolve as transition, and saved as a test file. It's an '09 file now, and some slides dissolve, others don't although they were all selected to dissolve. I've used Keynote for years on my mac so I know I set up the dissolve correctly. just not sure why only some of them are working and others not in the ipad file. I'm going to create one from 'scratch' using Keynote '09 and see if that makes a difference.

"Fall" or "Caída" transition effect

Hi,
First of all, I have the Spanish version of iWork 08. Before that, I had iWork 06, also in Spanish. In that version, there was a 3D effect called "Caída" (or "Fall" in English, i supose). On the 08 version of Keynote, that effect dissapeared, but there is a 2D effect called also "Caída". I have checked in the preferences the option for showing obsolete animations and, apparently, this problem is only on the Spanish translation.
My theory is this: In English, there are two differents effects that in the Spanish translation, they are both called "Caída". Since they have the same name, the transition selector shows only one of them (the 2D version in this case).
I think this because I have a presentation made with iWork 06 that uses the 3D version of "Caída" and when I open it with iWork 08 and play it, the transitino is shown perfectly... but if i change it to another, i can't select it again....
Is it possible that my problem is because this issue with translations conflicts?
Regards.

I forgot to mention that I found this similar thread: http://discussions.apple.com/thread.jspa?messageID=6667490
Anyway, I did some tests and I found the following: If I examine the contents of the Keynote.app package, there is file, Contents/Resources/Animations/Bolt.sfxplugin/Contents/Resources/Spanish.lproj/L ocalizable.strings. If I change the line
"Fall FallBuild" = "Caída";
for
"Fall FallBuild" = "Caída3D";
The "Caída" 3D transition effect appears again in the inspector . The only bad thing is that the 2D "Caída" effect dissapears... the 2D "Caída" transition effect is the same effect that can be applied to objects and is called, again, "Caída". That effect is apparently translated in this file:
Contents/Frameworks/SFAnimation.framework/Versions/A/Resources/Spanish.lproj/Loc alizable.strings
in the line
"Drop Bounce" = "Caída";
So, I don't know exactly what, but apparently there is an issue with this...
Regards.

Third party Flash transition effects

Can third party transition effects be used in Catalyst?

The effect code would not be accessible to Catalyst. You can use Flash Profession to animate the item with the effect you want, then import that swf into Flash Catalyst. FC does allow you to play and stop a swf.
The imported swf should be published with player 10.1 as the target.
Hope this helps,

How do I create an orange flash transition effect using Adobe Premiere CS6?

I am trying to create an orange flash transition effect using Adobe Premiere CS6 with my MAC computer.

Try this:
Add Cross Dissolve, cut and nest
Add a Fast Blur to the nest and tweak as in first screendump
Superimpose orange Color Matte and tweak as in second screendump
Make (fixed) effects into presets for future use.
Good luck.

N97 Transition Effect Problem

As you all know that the N97 user interface is not attractive due to the lack of the real transition effects, my 5800 have a nice iphone like transitions, but for the N97 the transition effect is very simple! Only some sliding menus and that’s it!! I wonder where is the screen orientation swivel effect we've seen in early N97 prototype videos? However, once I enable the transition effects on my N97 it will start to become unstable with crashes and it will affect some other programs like the photo gallery (will hang sometimes and gives low res pictures or just the whole program will go to the background while using the zoom button!) and the Web browser will start to display mid and large websites without images!!! I tried to reload the page so many times but only the text appears without any image! After trying so many times at last the page loaded successfully with all images but my happiness didn't last as I discovered that the phone turned off the transition effects automatically! When I went to the themes menu to check, it was turned on but actually it’s not working as the phone disabled it in order to load the web page! It happened to my three times since I updated my firmware last week (V 11)! I think this is because of the lack of enough RAM, I removed all the online widgets from the home screen (like facebook and accuweather) and just used contacts, programs, calendar, email, and music shortcuts which gave me additional 5 MB of free RAM and the phone felt more stable but still can’t handle the transition effects and proper Web pages display simultaneously! My 5800 handles web pages better and display all images even if the transition effects are turned on! I hope Nokia will fix these issues and gives us an option to disable the Widgets and Kinetic scrolling (Make the UI just like the 5800) in order to have more free RAM and enjoy full transition effects and proper Web Browsing with better stability just like the 5800.
Message Edited by ahmadddd on 07-Jul-2009 07:17 AM
Message Edited by ahmadddd on 07-Jul-2009 07:17 AM

Any updates on the effects? I wrote to Nokia support, I'm in Russia, they replied.
I have illustrated my question with the links to youtube where it is clearly visible how the UI rotates and other animation effects when opening the widgets.
My translation of the official reply:
"In firmware version 11 those effects do work! Try to resent the phone to the factory settings by typing: *#7780#, standard lock code is - 12345 or try to format the phone memory. Do your data and contacts back up using PC Suite . enter *#7370# (formats phone memory), enter the code 12345 the phone will resent. Then restore your back up."
Message Edited by takemori on 09-Jul-2009 04:19 PM

Keynote '09: 2 transition effects per slide initiated by 2 hyperlinks?

Similar Messages

Maybe you are looking for