Transport error in one instance of B2B

We have two instances of B2B in cluster and both point to single meta data repository. We have a trading parter which uses SFTP protocol and places the files on to a file system. If the request goes to first instance its processed successfully and the file is placed on to the file system. But we are getting a Transport error when the request goes to the B2B second instance. We tried ssh from the server where second instance is to the destination unix box with the same user id and password and it works.
Has any one faced this issue?
Thanks
Rakesh

Please find below the logs from b2b_dc_transport.log in DEBUG mode
oracle.tip.transport.TransportException: Authenctication failed or further authentication required. Status : 2
at oracle.tip.transport.basic.SFTPFileSender.send(SFTPFileSender.java:159)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1013)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1754)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:972)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.12.04 at 02:14:27:342: Thread-44: (ERROR) Error sending message :
oracle.tip.transport.TransportException: Authenctication failed or further authentication required. Status : 2
at oracle.tip.transport.basic.SFTPFileSender.send(SFTPFileSender.java:159)
at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1013)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1754)
at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:972)
at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1166)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:833)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:400)
at java.lang.Thread.run(Thread.java:534)
2009.12.04 at 02:15:11:810: ComponentManager: (ERROR) Closing Client
2009.12.04 at 02:15:11:811: ComponentManager: (ERROR) Closing Client
2009.12.04 at 02:15:11:811: ComponentManager: (ERROR) Closing Client
The same configuration works fine on the other node and the data is sucessfully placed on to the file system. When we login into the B2B UI from individual servers we see the configuration being updated and same ie the same host details and same user id
Thanks
Rakesh

Similar Messages

Error: ORA-16778: redo transport error for one or more databases

Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>

This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry

Getting Error :- Only one instance of COBRAS Export can be running at a time

Hi All,
I was checking the Briefcase Mode help file and it mentions for Unity Conection
that COBRAS will run multiple instances of itself – if you schedule multiple backups to fire up at the same time they will all run at the same time.
However if I schedule multiple backups to fire at the same time then I get the error :- "Only one instance of COBRAS Export can be running at a time".
This also happens if the COBRAS windows is left open and the scheduled backup starts in the background.
http://www.ciscounitytools.com/Applications/General/COBRAS/Help/COBRAS_Briefcase/COBRAS_Briefcase.htm#_Toc276653845
I am not sure if I am making a mistake in understanding the statement :- "COBRAS will run multiple instances of itself – if you schedule multiple backups to fire up at the same time" or do we need to add any switch like lot of other application need like /m etc in the field of the scheduled backups as I see as /silent switch for process to run in background automatically but none for multiple instances.
I am attaching the screen shots of the errors I got when
A.) I scheduled 2 backups to run at the same time and the COBRAS application window was open "COBRASExportCUC7.exe" was running and no backup took place and got errors for both the scheduled backups.
And
B.) I scheduled 2 backups to run at the same time and the COBRAS application window was closed off and "COBRASExportCUC7.exe" was not running and one of the scheduled backups started to work and the other one gave error and didn't work
Unity Connection in use :- Version 8.0.3.20000-18
Cobras Export :- Version 1.0 Build 76
Please Suggest.
Regards,
Prad
(E-Mail :- [email protected])

Yeah, I’m of two minds on that – on the one hand it’s bad style to have a scheduled application popping dialog boxes (especially if you’re running as an account you don’t log in as regularly) – one the other hand I did have some sites go a while not noticing backups were failing (due to a UNC not flying any longer after a server reconfig) – folks can be bad about checking log files or the event log for issues. A pop up would pretty much guarantee they’d notice on next login at any rate.
I think I may stitch in email notifications in COBRAS Export in the same way they’re in the User Data Dump so failures of scheduled backups would be noticed right away (big, bright email in your box saying “failed!” would do it).
Either way, I’ll update the help and make sure it fails quietly for now when I update some other items on the site middle of next week.
Thanks for the report.

Error: ORA-16778: redo transport error for one or more databases.   please help.

Hello everyone :
I can't switchover to primary. following is error and information.
RHEL 6.3 x86-64
Oracle database 11.2.0.3.0 Enterprise edition
Primary database = orclprmy
Standby database = orclstby1
##### /etc/hosts on orclstby1
[root@orclstby1 admin]# cat /etc/hosts
127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.50.211    ttprmy
192.168.50.212    orclstby1
### DG broker error
DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show configuration;
Configuration - TTDGConfig1
Protection Mode: MaxPerformance
Databases:
    orclstby1 - Primary database
      Error: ORA-16778: redo transport error for one or more databases
    orclprmy - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
########### listener.ora on orclstby1
[root@orclstby1 admin]# cat listener.ora
# listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (GLOBAL_DBNAME=orcl)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    (SID_DESC =
      (GLOBAL_DBNAME=orclstby1)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
    (SID_DESC =
      (GLOBAL_DBNAME=orclstby1_DGMGRL)
      (SID_NAME = orclstby1)
      (ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
ADR_BASE_LISTENER = /u2/oracle
############## tnsnames.ora on orclstby1
ORCL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
orclprmy =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
orclprmy_DGMGRL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
orclstby1 =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
orclstby1_DGMGRL =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
    (CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
##### alert log on orclstby1.
Fatal NI connect error 12504, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
VERSION INFORMATION:
        TNS for Linux: Version 11.2.0.3.0 - Production
        TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 06-SEP-2013 13:19:55
Tracing not turned on.
Tns error struct:
    ns main err code: 12564
TNS-12564: TNS:connection refused
    ns secondary err code: 0
    nt main err code: 0
    nt secondary err code: 0
    nt OS err code: 0
There is problem in alert log.
In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
Is any idea?
Thanks for help.
消息编辑者为：user4914135

#### on primary database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME            STATUS    TARGET ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1   VALID     LOCAL   ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclprmy
LOG_ARCHIVE_DEST_2   VALID     REMOTE LGWR       PENDING ALL_LOGFILES    PRIMARY_ROLE orclstby1
LOG_ARCHIVE_DEST_3   INACTIVE LOCAL   ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
#### on standby database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME            STATUS    TARGET ARCHIVER   SCHEDULE VALID_TYPE      VALID_ROLE   DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1   VALID     PRIMARY ARCH       ACTIVE   ALL_LOGFILES    ALL_ROLES    orclstby1
LOG_ARCHIVE_DEST_2   ERROR     STANDBY LGWR       PENDING ONLINE_LOGFILE PRIMARY_ROLE orclprmy
ORA-12504: TNS:listener was not given the SERVICE_NAME in
CONNECT_DATA
LOG_ARCHIVE_DEST_3   INACTIVE PRIMARY ARCH       INACTIVE ALL_LOGFILES    ALL_ROLES    NONE
#### log_archive_dest on primary database
SQL> show parameter log_archive_dest
NAME                                 TYPE        VALUE
log_archive_dest                     string
log_archive_dest_1                   string      location=/u3/arch/orcl vali
                                                 d_for=(ALL_LOGFILES,ALL_ROLES)
                                                  db_unique_name=orclprmy
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
log_archive_dest_2                   string      service="orclstby1", LGWR ASYNC
                                                 NOAFFIRM delay=0 optional comp
                                                 ression=disable max_failure=0
                                                 max_connections=1 reopen=300 d
                                                 b_unique_name="orclstby1" net_ti
                                                 meout=30, valid_for=(all_logfi
                                                 les,primary_role)
log_archive_dest_20                  string
log_archive_dest_21                  string
log_archive_dest_22                  string
#### log_archive_dest on standby database
SQL> show parameter log_archive_dest
NAME                                 TYPE        VALUE
log_archive_dest                     string
log_archive_dest_1                   string      location=/u3/arch/orclstby1 vali
                                                 d_for=(ALL_LOGFILES,ALL_ROLES)
                                                  db_unique_name=orclstby1
log_archive_dest_10                  string
log_archive_dest_11                  string
log_archive_dest_12                  string
log_archive_dest_13                  string
log_archive_dest_14                  string
log_archive_dest_15                  string
log_archive_dest_16                  string
log_archive_dest_17                  string
log_archive_dest_18                  string
log_archive_dest_19                  string
log_archive_dest_2                   string      service=orclprmy ASYNC valid_for
                                                 =(ONLINE_LOGFILE,PRIMARY_ROLE)
                                                  db_unique_name=orclprmy
log_archive_dest_20                  string
log_archive_dest_21                  string
log_archive_dest_22                  string
log_archive_dest_23                  string
log_archive_dest_24                  string
log_archive_dest_25                  string
#### spfile on standby database
</u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
orcl.__db_cache_size=1040187392
orclstby1.__db_cache_size=1090519040
orcl.__java_pool_size=16777216
orclstby1.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orclstby1.__large_pool_size=16777216
orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=536870912
orclstby1.__pga_aggregate_target=536870912
orcl.__sga_target=1610612736
orclstby1.__sga_target=161061273
orcl.__shared_io_pool_size=0
orclstby1.__shared_io_pool_size=0
orcl.__shared_pool_size=503316480
orclstby1.__shared_pool_size=469762048
orcl.__streams_pool_size=16777216
orclstby1.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_nam
e_convert='orcl','orclstby1'
*.db_name='orcl'
*.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=5218762752
*.db_unique_name='orclstby1'
*.deferred_segment_creation=FALSE
*.dg_broker_start=TRUE
*.diagnostic_dest='/u2/oracle'
*.fal_client='orclstby1'
*.fal_server='orclprmy'
*.log_archive_config='dg_config=(orclprmy,orclstby1)'
*.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
*.log_archive_dest_2='ser
vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
*.log_archive_dest_state_2='ENABLE'
orcl.log_archive_format='orcl_%t_%s_%r.arc'
*.log_archive_format='orclstby1_%t_%s_%r.arc'
orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_archive_min_succeed_dest=1
orcl.log_archive_trace=0
orclstby1.log_archive_trace=0
*.log_file_name_convert='orcl','orclstby1'
*.open_cursors=300
*.pga_aggregate_target=536870912
*.processes=
1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=1655
*.sga_target=1610612736
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
</u2/oracle/product/11.2.0/dbhome_1/dbs>
Thank you for your help.

StyledDocument error in one instance, but not another.

Hey all, i've tried to iron this bug out for the last 2 days, but no luck as yet.
I've tried to shorten the code down to the functional error bits, but I can't recreate the error. I'm sure i'm doing something wrong somewhere, but I cant see where.
I'm reluctant to post the code becuase it's mostly verbose, and it's easier to describe the problem.
I have a log file generating class (LogFileGen), that collates information in a (private) DefaultStyledDocument (accessable with getter getDSD()), with different Styles in it (using multiple insertString(offset, "text to insert", AttributeSet) statements along the line, called from various other classes.
This is sometimes displayed by a LogFile, which will have a JTextPane/JEditorPane (infoDisplay) (both display the error), and when the LogFile is shown to the user, I update it's infoDisplay with infoDisplay.setDocument(logFileGen.getDSD()).
I have had this work in certain cases before, but in this once case I get
Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: javax.swing.text.DefaultStyledDocument cannot be cast to javax.swing.text.html.HTMLDocument.
The Thread points to the line infoDisplay.setDocument(logFileGen.getDSD()). If I replace it with infoDisplay.setText(logFileGen.getTextFromDSD()), I get the content, but without the styling (obviously), and in other classes with their own JTextPanes, it works fine, formatting and everything.
Can anyone tell me why I get the error on some classes and not on others? I'm going mental here :s
Many, Many thanks in advance. In the meantime, i'll try and get a working example that actually reproduces teh err0r :(

xD Many apologies. you read fast.
Exception in thread "AWT-EventQueue-0" java.lang.ClassCastException: javax.swing.text.DefaultStyledDocument cannot be cast to javax.swing.text.html.HTMLDocument
     at javax.swing.text.html.ParagraphView.getStyleSheet(Unknown Source)
     at javax.swing.text.html.ParagraphView.setPropertiesFromAttributes(Unknown Source)
     at javax.swing.text.ParagraphView.<init>(Unknown Source)
     at javax.swing.text.html.ParagraphView.<init>(Unknown Source)
     at javax.swing.text.html.HTMLEditorKit$HTMLFactory.create(Unknown Source)
     at javax.swing.text.CompositeView.loadChildren(Unknown Source)
     at javax.swing.text.CompositeView.setParent(Unknown Source)
     at javax.swing.plaf.basic.BasicTextUI$RootView.setView(Unknown Source)
     at javax.swing.plaf.basic.BasicTextUI.setView(Unknown Source)
     at javax.swing.plaf.basic.BasicTextUI.modelChanged(Unknown Source)
     at javax.swing.plaf.basic.BasicTextUI$UpdateHandler.propertyChange(Unknown Source)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at java.beans.PropertyChangeSupport.firePropertyChange(Unknown Source)
     at java.awt.Component.firePropertyChange(Unknown Source)
     at javax.swing.text.JTextComponent.setDocument(Unknown Source)
     at javax.swing.JTextPane.setDocument(Unknown Source)
     at _infoDisplay.setDocument(logFileGen.getDSD())(LogFile.java:85)_
        at java.awt.AWTEventMulticaster.mouseClicked(Unknown Source)
     at java.awt.Component.processMouseEvent(Unknown Source)
     at javax.swing.JComponent.processMouseEvent(Unknown Source)
     at java.awt.Component.processEvent(Unknown Source)
     at java.awt.Container.processEvent(Unknown Source)
     at java.awt.Component.dispatchEventImpl(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Window.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)Edited by: Hemmels on May 11, 2009 7:31 AM
Edited by: Hemmels on May 11, 2009 7:31 AM
- Guess underline fails.

Redo Transport Error

I am facing following errors , first error is on production database and second error is on physical standby database.
1. ORA-16778: redo transport error for one or more databases
2. ORA-01017: invalid username/password; logon denied
I study above messages but could not resolve. Now i shall be v v thankful if someone can help me in resolving errors, in simple step-by-step way.
Thank in advance

1. ORA-16778: redo transport error for one or more databases
16778, 00000, "redo transport error for one or more databases"
// *Cause: The redo transport service was unable to send redo data to one
//          or more standby databases.
// *Action: Check the Data Guard broker log and Oracle alert log for
//          more details. Query the LogXptStatus property to see the
//          errors.2. ORA-01017: invalid username/password; logon denied
Provide valid username/password
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version

B2B-50079 Transport error: To Transport Informations Not found

Hi,
I'm trying an outbound scenario in b2b using ebXML. When i tried to test, 3 messages for a single instance can be seen.
1.A message entry with correct document type which converts custom format to ebXML format and the status is in "MSG_WAIT_ACK" for some time. (sender and receiver are correct)
2. A message entry with document type acknowledgement is seen with status "MSG_ERROR". (sender and receiver both are same - means the host TP)
3. A message entry with no document type and status as "MSG_ERROR". (sender and receiver both are same - means the host TP)
Later, the original message entry state changes from "MSG_WAIT_ACK" to "MSG_ERROR" since the retry for acknowledgement is over.
What is the mistake I'm doing here? Please help me to resolve this.
Below is the details of the acknowledgement message.
Id     7F0000011392F6F4E0B0000050F6DB1A
Message Id     7F0000011392F6F4E040000050F6DB15
Refer To Message     Refer To Message
Sender Type     Name
Sender Value     OracleServices
Receiver Type     Name
Receiver Value     MarketInc
Sender     MarketInc
Receiver     MarketInc
Agreement Id
Agreement
Document Type     Acknowledgement
Document Protocol
Document Version
Message Type     ACK
Direction     OUTBOUND
State     MSG_ERROR
Acknowledgement Mode     ASYNC
Response Mode     NONE
Send Time Stamp     08/16/2012 06:06:27 PM
Receive Time Stamp     08/16/2012 06:06:27 PM
Document Retry Interval(Channel)     0
Document Remaining Retry(Channel)     0
Document Retry Interval(Agreement)     0
Document Remaining Retry(Agreement)     0
Native Message Size
Translated Message Size
Business Action Name     MessageError
Business Transaction Name
Xpath Name1
Xpath Value1
Xpath Expression1
Xpath Name2
Xpath Value2
Xpath Expression2
Xpath Name3
Xpath Value3
Xpath Expression3
Correlation From XPath Name
Correlation From XPath Value
Correlation From XPath Expression
Correlation To XPath Name
Correlation To XPath Value
Correlation To XPath Expression
Wire Message     Wire Message
Application Message     Application Message
Payload Storage     Payload Storage
Attachment     Attachment
Label
Collaboration Id     @7F0000011392F6F4D350000050F6DB09
Collabration Name
Collabration Version
Business Action Name     MessageError
Exchange Protocol Name     ebMS
Exchange Protocol Version     2.0
Interchange Control Number
Group Control Number
Transaction Set Control Number
Error Code     B2B-50079
Error Description     Machine Info: (localhost.localdomain) Transport error: To Transport Informations Not found
Error Level     ERROR_LEVEL_COLLABORATION
Error Severity     ERROR
Error Text     Transport error: To Transport Informations Not found

Have you created a channel in remote trading partner profile? If yes, have you included the channel in the agreement? If yes, then save validate and deploy the agreement again. Make sure that URL in ebMS channel is not pointing to same B2B host.
You may refer -
http://www.oracle.com/technetwork/middleware/soasuite/b2b-tu003-ebxml-134605.pdf
Regards,
Anuj
Edited by: Anuj Dwivedi on Aug 17, 2012 2:44 PM

B2B-50079 Transport Error : Bad Message

Hi All,
I have an SFTP outbound TPA which is used to transfer a PGP file from our internal system to TP vendor.
So the transfer is as follows B2B(Internal System) -> WebServer(acts as proxy while connecting to third party server)-->ThirdParty.
The use proxy is checked in the Channels of the Trading Partner.
The transfer fails while transfering the file to the TP with the below error.
"B2B-50079 Transport Error : Bad Message" I have manually sftpd from web server to the TP server and it is working absolutely fine.
Also i have verified that the certificate and host,port username details to connect to the TP are correct.
Please let us know on what the problem area could be.
There is no problem with file naming convention since the file is getting picked up by the listening channel and also we have checked the preserve file name option in the TP channel.
Any help on this is much appreciated.
Thanks,
Naveen Kumar T.

Thanks Anuj for the response.
We already have the required patch, also its working fine with other Trading partners which uses SFTP. We are facing this issue with only one Trading partner and the same is working fine with 10g B2B but not with 11g.
Please let us know if there is any other configurations which we can check.
Thanks,
Sirisha

Error while creating the view from one instance to another instance

Hi Experts
I want to Create a view which reside in one instance for example xxx Instance . I want to create the same view which reside in xxx instance to another instance for example YYY Instance How to acheive this ?
I tried desc the View take the view script from XXX instance and copied the view script to YYY instance when I compiled Iam getting an Error
For Example My view in XXX Instance
CREATE OR REPLACE FORCE VIEW xxx.sample
First_name,
last_name
as
     select "F_NAME",
             "L_NAME"
     FROM EMP;When try to copy and compile the same view in my YYY Instance
i am getting error
ORA: table or view does not exist
Advance Thanks
AT

A.T wrote:
Hi Experts ,
Thanks For all your valuable information I amTrying Of DB Link i think so
As per My understanding If wrong anywhere please advice me
Here Instance is Like : One DB 10g divided into several Instance like (test , devlopement , production Instance)
Now hope i ll make my req clear .
Coming to my reqirement
the actual table EMP is in xxi.TEST (Here xxi => Schema and test is an Instance )
I want to create the view which is based on by table EMP which in my test instance to devoplment instance
For example xxo.development (here xxo => Schema and development is an Instance )
Need to access the xxi schema in Test Instance How can I create a DB Link please share your ideas and advice me
Advance Thanks
ATIt's still not at all clear, but let me outline what I think you are after
Given a database, ORCL_A
In database ORCL_A we have a schema, HALFTRACK
User HALFTRACK has a table, MYSTUFF
Given a database, ORCL_B
In database ORCL_B we have a user GREENBRASS
User GREENBRASS needs to be able to query the table HALFTRACK.MYSTUFF.
In database ORCL_B, as user GREENBRASS
create database link mylink
connect to halftrack identified by halftracks_pswd
using ORCL_A;
select * from mytable@mylink;The db link defines a connection specification to ORCL_A, using the credentials of a user on ORCL_A. The target of the USING clause in the link definition must be an entry in the tnsames.ora file on the server hosting database ORCL_B.
When querying through the link, database ORCL_B is simply acting as a client to ORCL_A, no different that a sqlplus session on ORACL_B's server. As far as ORCL_A is concerned, ORCL_B is just another client requesting a connection, connecting with the credentials defined in the link definition.

WebLogic Error : Registered more than one instance with the same objectName

HI there, I'm facing a big problem. I have two environments installed on the same physical machine.
I have ALSB and WLI servers running out there.
Environment 1 - WLI port running at 7011 domain name : stp_wli_domain and ALSB port running at 8011 domain name: stp_alsb_homo1 - folders- stp_wli_domain / stp_bea_alsb_homo
Environmnet 2 - WLI port running at 7211 domain name : stp_wli_domain2 and ALSB port tunning at 8211 domain name : stp-alsb_homo2 - folders - stp_wli_domain2 / stp_bea-alsb_homo2
Everything was working fine, but these days I had install new deployments on both environment and I got this error :
java.lang.IllegalArgumentException: Registered more than one instance with the same objectName : stp_wli_domain:ServerRuntime=wli_wls01,Name=stp_wli_domain,Location=wli_wls01,Type=AIRuntime new:com.bea.wlai.management.AIRuntimeMBeanImpl@bcf22dc existing com.bea.wlai.management.AIRuntimeMBeanImpl@de02e6c
The weird is : There is no same object name, as you can see, domains are different, folders are different and ports are diferrent, including multicast addresses.
Have you guys seen this before ?
I'm under pressure here, 'cause some projects had stopped to work.
Please I would appreciate any help.
Tks.
Edson

HI there, thanks for attention..
See ...
There's a lot of confusion with these env's .
I did not built this, so... I'm cleaning my hands.... anyway... :)
I must fix....
Well basically if we have two env's, so we have different project each one right ?
Ok, but I was told that if you have on the same network and same physical machine the name of AdminServer as "AdminServer" in all domains, so it goes with problems... I never heard about it... but is a good practice you put the names for example :
WLI - WLIAdminServer
ALSB - AlsbAdminServer
WLI2 - WLiadminServer2
ALSB2 - ALsbAdminServer2
I would do it.. this way..
But how it wasn't me...
We got..
WLI - WliAdminServer
ALsb - AdminServer
WLI2 - AdminServer
ALsb2 - AdminServer
Have you got it ?
So... I was told that this could be a problem, almost all AdminServers with the same name... guess what ?Some Projects are back to work. but not at all.. only some.. so I 'm breathing better now... but I would like to know if you seen this before ?
I would appreciate your help again.
Unfortunately there's no detailed stack trace to track this
Tks.

DSU Execution Error: More then one instance found for name: DVEBMGS00

Hello,
try to start an Upgrade from SAP4.7x110 to ECC6.0 EHP4 SR1 by running the statup.but. I recieve immediatly the error. DSU Execution Error: More then one instance found for name: DVEBMGS00.
The System is a fresh homo.sys-copy (comming from DVEBMGS00). On the harware was running in former times an instance DVEBMGS00 but the SID was a different. I allready looked if there is still something on the host from this last installation but nothing found.
Any suggestions
Peter

Hi,
Please see the link below..Hope this will help you..
Upgrade stuck in Pre- Processing
DSU Execution Error
/thread/1948457 [original link is broken]
Regards

Exception on JaxRpc invoke: HTTP transport error in BPEL process

Hi,
One C# web service is running on IIS. I am trying to invoke this web service from BPEL process on the same system in which IIS is running. I have created the partnerlink using generated the WSDL file from IIS. I have changed the 'tempuri.org' to 'localhost' . I am able to compile and deploy the process but during execution it gives following error during invoke of web service
<messages><input><Invoke_1_ProcessXMLDoc_InputVariable_1><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters"><ProcessXMLDoc xmlns="http://10.100.34.70/"/>
</part></Invoke_1_ProcessXMLDoc_InputVariable_1></input><fault><remoteFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke: HTTP transport error: javax.xml.soap.SOAPException: java.security.PrivilegedActionException: javax.xml.soap.SOAPException: Bad response: 401 Access Denied</summary>
</part></remoteFault></fault></messages>
Can anybody suggest to resolve this error?
Thanks

try removing your "localhost" from the windows hosts file and then do it all over again using your ip or hostname.

[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.

Post Author: LeeCUK
CA Forum: Authentication
I have installed Enterprise XIR2 onto a Windows 2003 server and all services are running.I have installed the client on another windows 2003 server and I can connect to the console via the web.
Firstly desktop intel would not work and gave me the error below, however a new entry appeared in my server dropdown with servername (.Net Portal) and after selecting this Desktop intell worked.
When I try to run designer I dont get the extra server in the dropdown nor does it connect when tryped manually and gives me the same error I was getting for desktop intel.
Im using enterprise authentication
Has anyone figured this out please?
The error im getting is below[repo_proxy 13] SessionFacade::openSessionLogon with user info has failed(Transport error: Communication failure.(hr=#0x80042a01)

Post Author: jsanzone
CA Forum: Authentication
LeeCUK:
The [repo_proxy 13] error seems to be a catch-all for BO in that I've worked with this software (XI R2) for 1 1/2 years now and each time I've encountered [repo_proxy 13] it has been for a different reason, thus, you're going to have to apply troubleshooting checks all over the place until you find the problem. In my particular case I just resolved my [repo_proxy 13] error I've been working on this week, and here was my scenario. Our server in the lab died due to a hard drive failure, so we cut our losses and installed a new & more powerful server. When the rebuild was done I could not connect from my laptop to the repository via Designer (good old [repo_proxy 13] error). After much angst, etc, etc I found out that the servers in the CMC (/businessobjects/enterprise115/admin/en/admin.cwrwere">http://<server>/businessobjects/enterprise115/admin/en/admin.cwrwere) were all down except for one (even though CCM showed all servers "up"). When I went to start the servers in the CMC I was prompted for an account, and no matter what account I tried it won't work. So I went back to the CCM servers and stopped them all, then changed the default account it was using from LocalSystem to the administrator account, restarted all servers in CCM, went back to CMC and noted that all servers were now up as well. Then I went back to my laptop and used Designer and was able to successfully log in. Thus, the end of my story, however, it seems that many [repo_proxy 13] errors have different beginning and endings. For instance, a year ago I had the same [repo_proxy 13] error and brought it to BO tech support. They determined that I had to uninstall my client from my laptop, clean out the registry for any references to BO keys, and remove the c:\program files \Business Objects folder, then reinstall, and sure enough it worked in that case, but not in this case when I tried it again. By digging deeper I found out the root cause to my current problem, and voila, I'm in!
Good luck!

Error AIP-50079 : Transport error: [IPT_HttpSendHostNotFound]

I was trying Tutorial 3 ( EDI X12 over AS2) from User's Guide. As per instruction, I have configured two B2B Servers. Both the servers are up and running. When I am enqueuing 850 message from Acme server, It's not going to the other server. The error message I see under Reports->Error is:
AIP-50079 : Transport error: [IPT_HttpSendHostNotFound] Host oracle01.dev.rapidigm.com: oracle01.dev.rapidigm.com cannot be found. oracle01.dev.rapidigm.com: oracle01.dev.rapidigm.com.
Not sure why Host name is showing twice (oracle01.dev.rapidigm.com: oracle01.dev.rapidigm.com) in the error message? It should be <Host Name> : <Port>, right?
Similar thing happened when I enqueued 855 from GlobalChips Server.
Appreciate your quick response.
Thanks
Saumitra

Thanks Ramesh!
Actually I had to give IP address instead of Host name. Now My message is going from one server to another. However I am getting 'An unexpected error occurred during validation' error on the receiving side. Here is the b2b.lig in Debug more.
Appreciate your help.
2007.03.06 at 16:00:06:462: Thread-12: B2B - (ERROR) java.lang.NullPointerException
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:970)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1464)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:1851)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1783)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1741)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:454)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:326)
at java.lang.Thread.run(Thread.java:534)
2007.03.06 at 16:00:07:058: Thread-12: B2B - (ERROR) Error -: AIP-51505: General Validation Error: java.lang.NullPointerException
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:1288)
at oracle.tip.adapter.b2b.engine.Engine.processIncomingMessage(Engine.java:1464)
at oracle.tip.adapter.b2b.engine.Engine.incomingContinueProcess(Engine.java:1851)
at oracle.tip.adapter.b2b.engine.Engine.handleMessageEvent(Engine.java:1783)
at oracle.tip.adapter.b2b.engine.Engine.processEvents(Engine.java:1741)
at oracle.tip.adapter.b2b.data.MsgListener.onMessage(MsgListener.java:454)
at oracle.tip.adapter.b2b.data.MsgListener.run(MsgListener.java:326)
at java.lang.Thread.run(Thread.java:534)
Caused by: java.lang.NullPointerException
at oracle.tip.adapter.b2b.document.edi.EDIDocumentPlugin.processIncomingDocument(EDIDocumentPlugin.java:970)
... 7 more
----------------------------------------------

OTA-HTTP-SEND-1005 Error while sending to destination B2B

Hi,
While sending ebxml message to destination B2B, we are getting error as
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1005
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendConnectionRefused] HTTP connection is refused.
I tried opening opening https://<hostname>:443/b2b/transportServlet url in the browser and could see that destination B2B was accepting connections.
I went through few threads in forum which suggests that difference in RMI port number may cause this issue. But that is not same in my case. I have the same port number in both tip.properties and web.xml.
Please find below the extract of my b2b.log.
2010.07.09 at 08:09:12:248: Thread-23: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Calling Send to transmit the message
2010.07.09 at 08:09:12:248: Thread-23: B2B - (DEBUG) Protocol Name: HTTPS
2010.07.09 at 08:09:12:248: Thread-23: B2B - (DEBUG) Version Name: 1.1
2010.07.09 at 08:09:12:248: Thread-23: B2B - (DEBUG) Endpoint: https://<hostname>:443/b2b/transportServlet
2010.07.09 at 08:09:12:248: Thread-23: B2B - (DEBUG) using SSL
2010.07.09 at 08:09:12:248: Thread-23: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send URL: HTTPS://<hostname>:443/B2B/TRANSPORTSERVLET
2010.07.09 at 08:09:12:248: Thread-23: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send TO Endpoint: 502 https://<hostname>:443/b2b/transportServlet
2010.07.09 at 08:09:12:248: Thread-23: B2B - (DEBUG)
Protocol = HTTPS
Version = 1.1
Transport Header
DOCTYPE_NAME:rqRequestIncidentReportAmend_DT
SOAPAction:"ebXML"
TO_PARTY:229736194
DOCTYPE_REVISION:1.0
ACTION_NAME:rqRequestIncidentReportAmend
FROM_PARTY:001316827
Content-Type:multipart/related;type="text/xml";boundary="----=_Part_14_26794447.1278677352170";start="<ebxheader-C02C7BC9129B71BFE2E00000F2690000>"
Content-Length:7520
Parameters
-- listing properties --
http.sender.timeout=0
2010.07.09 at 08:09:12:279: Thread-23: B2B - (DEBUG) scheme null userName null realm null
2010.07.09 at 08:09:33:467: Thread-23: B2B - (WARNING)
Message Transmission Transport Exception
Transport Error Code is OTA-HTTP-SEND-1005
StackTrace oracle.tip.transport.TransportException: [IPT_HttpSendConnectionRefused] HTTP connection is refused.
     at oracle.tip.transport.TransportException.create(TransportException.java:91)
     at oracle.tip.transport.basic.HTTPSender.send(HTTPSender.java:629)
     at oracle.tip.transport.b2b.B2BTransport.send(B2BTransport.java:311)
     at oracle.tip.adapter.b2b.transport.TransportInterface.send(TransportInterface.java:1050)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequestPostColab(Request.java:1758)
     at oracle.tip.adapter.b2b.msgproc.Request.outgoingRequest(Request.java:976)
     at oracle.tip.adapter.b2b.engine.Engine.processOutgoingMessage(Engine.java:1194)
     at oracle.tip.adapter.b2b.transport.AppInterfaceListener.onMessage(AppInterfaceListener.java:141)
     at oracle.tip.transport.basic.FileSourceMonitor.processMessages(FileSourceMonitor.java:913)
     at oracle.tip.transport.basic.FileSourceMonitor.run(FileSourceMonitor.java:326)
Caused by: java.net.ConnectException: Connection timed out: connect
     at java.net.PlainSocketImpl.socketConnect(Native Method)
     at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:305)
     at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:171)
     at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:158)
     at java.net.Socket.connect(Socket.java:464)
     at java.net.Socket.connect(Socket.java:414)
     at java.net.Socket.<init>(Socket.java:310)
     at java.net.Socket.<init>(Socket.java:154)
     at HTTPClient.HTTPConnection$EstablishConnection.run(HTTPConnection.java:3916)
2010.07.09 at 08:09:33:467: Thread-23: B2B - (DEBUG) oracle.tip.adapter.b2b.transport.TransportInterface:send Error in sending message
2010.07.09 at 08:09:33:467: Thread-23: B2B - (INFORMATION) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab Request Message Transmission failed
2010.07.09 at 08:09:33:467: Thread-23: B2B - (DEBUG) DBContext beginTransaction: Enter
2010.07.09 at 08:09:33:467: Thread-23: B2B - (DEBUG) DBContext beginTransaction: Transaction.begin()
2010.07.09 at 08:09:33:467: Thread-23: B2B - (DEBUG) DBContext beginTransaction: Leave
2010.07.09 at 08:09:33:467: Thread-23: B2B - (DEBUG) oracle.tip.adapter.b2b.msgproc.Request:outgoingRequestPostColab [IPT_HttpSendConnectionRefused] HTTP connection is refused.
Connection timed out: connect
2010.07.09 at 08:09:33:467: Thread-23: B2B - (DEBUG) oracle.tip.adapter.b2b.engine.Engine:notifyApp retry value <= 0, so sending exception to IP_IN_QUEUE
2010.07.09 at 08:09:33:482: Thread-23: B2B - (DEBUG) Engine:notifyApp Enter
2010.07.09 at 08:09:33:482: Thread-23: B2B - (DEBUG) Enqueue Engine AQJMSCorrelationID = null
2010.07.09 at 08:09:33:482: Thread-23: B2B - (DEBUG) notifyApp:notifyApp Enqueue the ip exception message:
<Exception xmlns="http://integration.oracle.com/B2B/Exception" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<correlationId>null</correlationId>
<b2bMessageId>C02C7BC9129B71BF76800000F268FE00</b2bMessageId>
<errorCode>AIP-50079</errorCode>
<errorText>Transport error: [IPT_HttpSendConnectionRefused] HTTP connection is refused.
Connection timed out: connect</errorText>
<errorDescription>
<![CDATA[Machine Info: (BDC-EXTRA107)
Transport error: [IPT_HttpSendConnectionRefused] HTTP connection is refused.
Connection timed out: connect ]]>
</errorDescription>
<errorSeverity>2</errorSeverity>
</Exception>
2010.07.09 at 08:09:33:498: Thread-23: B2B - (DEBUG) Engine:notifyApp Exit
2010.07.09 at 08:09:33:498: Thread-23: B2B - (DEBUG) DBContext commit: Enter
2010.07.09 at 08:09:33:498: Thread-23: B2B - (DEBUG) DBContext commit: Transaction.commit()
Kindly suggest us on what could be the issue here and a possible resolution.
Thanks in advance.
Regards,
Nagasudhan

Re: Outbound HTTP - Connection fails Hi,
I got my issue resolved. I refered to a similar post on the forum. All I had to was adding proxy settings in tip.properties. For benefit of others I'm pasting the link I've refered to.
Re: Outbound HTTP - Connection fails
Regards,
Nagasudhan

Transport error in one instance of B2B

Similar Messages

Maybe you are looking for