Transport Error. Sintax error in routine.

Hi all,
I'm facing an error and I would like to receive some help.
I'm trying to transport a transformation of BI7.0 from development to quality environment and I'm receiving this error:
Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (activation mode)
Transformation 0375K6W8L81KCGPGVDUBF7P9Y1O9AZEL deleted in version M of DDIC
Activation of Transformation type object
Transformation 0375K6W8L81KCGPGVDUBF7P9Y1O9AZEL
Rule (target: ZIMPPRESU, group: 01 Grupo estándar): Syntax error in routine
Transformation  : Rule 13 could not be imported
I've checked the routine and no sintax errors are found. It works perfectly in dev.
I found a similar post in sdn:
And I followed the steps I found in it. I recollected the tranformation objects in the transport connection and no objects were missing.
In RSLOGSYSMAP table I have one record and the ONLYNEW field is empty. I don't know if it's ok or not but it's not the first time I have transported this transformation.
Can anyone help me in resolving this issue?
Thanks, points will be assigned.

hi,
We faced a similar problem last week...
Check the routine first ...There might not be a syntax error but maybe you are using the routine to fetch data from someother ODS or infocube or using an infoobject which might not have been transported...
In our case, we were fetching data from another ODS using this routine and had not transported that ODS, thats why we faced this problem...
Some object required for the routine to work fine, has not been transported, thats why its showing this error......
Regards,

Similar Messages

  • Error while transporting Transformation: Syntax error in Start Routine

    Hi Everyone,
    I'm facing a strange problem during transporting one of the Business Content cubes from Dev. to Quality.
    I'd activated the DSO 'Purchase Order Items (0PUR_O01)' and its entire data flow from the 4 datasources 2LIS_02_CGR, 2LIS_02_SCN, 2LIS_02_SGR, and 2LIS_02_ITM from BC. Then I migrated the Transfer/Update rules to transformations and the DataSources to BI7 DataSource. So far so good. The migration was successful and all the objects were activated.
    Now when I transport the same to Quality, the import fails with return code 8 and the error message says:
    'Start of the after-import method RS_TRFN_AFTER_IMPORT for object type(s) TRFN (Activation Mode)'
    'Start Routine: Syntax error in routine'
    I verified that the transformation where the error orrured was the one from InfoSource Z2LIS_02_ITM to DSO 0PUR_O01. I went and checked the start routine and it did indeed have a syntax error:
    'In PERFORM or CALL FUNCTION "ROUTINE_9998", the actual parameter SOURCE_PACKAGE" is incompatible with the formal parameter DATA_PACKAGE". '
    But when I check in the Dev. system, there is no syntax error for the same routine. Later, I tried to transport only the said transformation by re-activating it in Dev, and again I got the same error.
    I have no idea why I'm getting a syntax error in the start routine when there are non in the Dev. system. Also none of the coding is customised, it was only the BC code, migrated to a transformation.
    Any suggestions on the steps I could take to transport the transformation to my quality system?
    Thanks,
    Ram

    Hi Ajay, Shanthi, svu and Ray
    I do indeed have a start routine in my transformation and it was migrated from a 3.x update rule to a BI 7 transformation routine.
    The migration was successful and the Start Routine has NO syntax errors in the start routine in the Dev. system. I only encounter the error while transporting it to the Quality system. I cannot modify the code in the Quality system because it is non-changelable and there is no point in trying to change the code in Dev. because there are no errors over there.
    I've also made sure that I've transported all the necessary objects required by the transformations to quality. The routine does not perform a lookup, it simply deletes some records from the data package based on the processkey value (which is itself present in the data package).

  • Transport error when transporting a transformation with formulas/routines

    Hi All,
    I have migrated some 3.5 dataflow (Datasource, Transfer rules, Update rules, Infosource etc..) to 7.0. I am able to load the datatargets using the DTP's just fine.
    The problem I am facing is transporting these dataflows to Quality and Production systems. I am specifically having problem with transporting transformations which has formulas/routines.
    I was able to transport the transformations with direct mapping from source field to target fields (no formulas/routines) without any problem and it works fine in Quality system. I tried to transport couple of transformations with formulas/routines, all of them give a shortdump ASSERTION_FAILED (transport fails with error code 12).
    I am not sure what the problem is. We are on support package 16. Has anyone faced this problem before? Any suggestions are appreciated.
    Points are assured
    Thanks,
    Sirish.

    Hi,
    What is the dump message you are getting? Check in ST22 and let us know. And try the process which is said in the previous post collect all the transformations through transport connections and transport them.
    Khaja

  • Error while activating a routine  "no object list"

    hi
    I am getting a error while activating a routine Rv50c601
    "There is no object list for INCLUDEs"  Please suggest on the error and resoulution
    regards
    Nishant

    Try running program RV80HGEN.
    Regards,
    Naiimesh Patel

  • Hyper Transport Sync Flood Error (msi 785gm-e51)

    hello all,
    my pc
    x4-630
    his 5750
    vgen 2gb 1333
    corsair 450w
    i have problem with my pc. sometimes its reboot when im playing games.after reboot there a error messege hyper transport sync flood error.
    i already google about this problem and i got a information on the google this problem caused by my motherboard.
    how to solve this?

    Quote from: Svet on 16-July-10, 17:45:09
    error in memtest or "Hyper Transport Sync Flood Error" ?
    Use normal English, not "r", "u" and such.
    What exactly? brand model?
    Have you tried with different one?
    In which dimm slot is installed?
    done >>Clear CMOS Guide<< with power cord removed,
    and 'Load bios optimized defaults" ?
    error in hyper transport sync flood error
    brand name vgen,
    here the full spec i got from vgen website :
    DDR3 PC 10600/1333Mhz
    Category
    PC Memory
    Type
    Long-DIMM DDR3
    Size
    130 x 30 x 2 mm
    Status
    New
    Description
    capacity : 2GB
    speed : 1333 MHz
    CAL : CL 9
    Chip Configuration: 32M x 8 8 Chip
    Chipset : Major Brand
    Jenis IC :Tiny BGA
    Slot : DIMM 240 pin
    Tipe : Unbuffered
    Voltage : 1.5 V
    ECC : No
    Registered : No
     i never tried with other ram
    honestly i dont know what is dimm slot, but if i dont get you wrong its number one slot ram.
    yes i already test clear cmos with power cord removed because i afraid get electric shock (im not pc expert)
    oh ya found quote in another forum
    After reading about 200 threads on this problem, I came to the conclusion that it's a voltage problem. It's not BIOS, an ATI series of video card, faulty CPU or RAM, or a motherboard. The frequency of AMD CPUs being mentioned, power needs, and the ability of BIOS to compensate for voltage changes led me to believe that this is a problem with under-voltage. I don't have the time to experiment with each and every variable, so I upped the voltages in BIOS on all elements of both RAM and the CPU. Before this, I was getting a reboot at random and increasingly irritating times (I do annoying grad homework on this thing). So, after upping the voltages, I haven't had one reboot for HTSFE. If anyone wants to go from here and mess with the individual voltages, go for it. It's definitely a voltage problem. Hope this helps.
    so i test it, i upped all voltages that i can change in BIOS. so far its already 2 day without Hyper transport error.
    it is fine to upped all voltages?i up it until the highest "white" voltage ( i read in BIOS, grey=auto, white=normal, red=no recommended)

  • Error in mru internal routine: ORA-20001: no data found in tabular form

    Hi All,
    I am trying to do the Multi Row Update. Please go through the below process which i followes:
    > I have a table B which is of child table of A, the columns belongs to table B are B_ID, B_Name, B_Description and A_ID.
    > I have prepared a report with B_NAME, B_DESCRIPTION and B_ID and in this B_NAME is of LOV.
    > Now I want to update the values through interface by clicking on SUBMIT [Apply Change] button.
    > To do this I used the Process of "Multiple Rows Update" by choosing table B and a primary key value of table B which is B_ID.
    While clicking on the SUBMIT [Apply Change] button I am getting this error:
    Error in mru internal routine: ORA-20001: no data found in tabular formPlease tell me is i am following the correct process. If not please correct me.
    Thanks in advance
    Vishwanath

    Hi All,
    I am trying to do the Multi Row Update. Please go through the below process which i followes:
    > I have a table B which is of child table of A, the columns belongs to table B are B_ID, B_Name, B_Description and A_ID.
    > I have prepared a report with B_NAME, B_DESCRIPTION and B_ID and in this B_NAME is of LOV.
    > Now I want to update the values through interface by clicking on SUBMIT [Apply Change] button.
    > To do this I used the Process of "Multiple Rows Update" by choosing table B and a primary key value of table B which is B_ID.
    While clicking on the SUBMIT [Apply Change] button I am getting this error:
    Error in mru internal routine: ORA-20001: no data found in tabular formPlease tell me is i am following the correct process. If not please correct me.
    Thanks in advance
    Vishwanath

  • Error in executing ODCIIndexStart() routine

    In my application We have sometimes the follow error:
    Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4) (Build 031126)): oracle.toplink.exceptions.DatabaseException
    Exception Description: java.sql.SQLException: ORA-29902: error in executing ODCIIndexStart() routine
    ORA-20000: Oracle Text error:
    ORA-00942: table or view does not exist
    Internal Exception: java.sql.SQLException: ORA-29902: error in executing ODCIIndexStart() routine
    ORA-20000: Oracle Text error:
    ORA-00942: table or view does not exist
    Error Code: 29902
    at oracle.toplink.exceptions.DatabaseException.sqlException(DatabaseException.java:226)
    at oracle.toplink.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:695)
    at oracle.toplink.threetier.ServerSession.executeCall(ServerSession.java:506)
    at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(CallQueryMechanism.java:130)
    at oracle.toplink.internal.queryframework.CallQueryMechanism.executeCall(CallQueryMechanism.java:111)
    at oracle.toplink.internal.queryframework.CallQueryMechanism.executeSelectCall(CallQueryMechanism.java:193)
    at oracle.toplink.internal.queryframework.CallQueryMechanism.selectAllRows(CallQueryMechanism.java:563)
    at oracle.toplink.queryframework.ReadAllQuery.execute(ReadAllQuery.java:421)
    at oracle.toplink.queryframework.DatabaseQuery.execute(DatabaseQuery.java:498)
    at oracle.toplink.queryframework.ReadQuery.execute(ReadQuery.java:111)
    at oracle.toplink.publicinterface.Session.internalExecuteQuery(Session.java:1968)
    at oracle.toplink.threetier.ServerSession.internalExecuteQuery(ServerSession.java:629)
    at oracle.toplink.threetier.ClientSession.internalExecuteQuery(ClientSession.java:392)
    at oracle.toplink.publicinterface.Session.executeQuery(Session.java:1096)
    at oracle.toplink.publicinterface.Session.executeQuery(Session.java:1048)
    at oracle.toplink.publicinterface.Session.readAllObjects(Session.java:2416)
    at it.csi.cultura.om.supporto.ObjectManagerFrontoffice.getElencoEventiFiltrati(ObjectManagerFrontoffice.java:1431)
    at it.csi.cultura.backoffice.eventinotizie.ElencoEventi.execute(ElencoEventi.java:125)
    at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:484)
    at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:274)
    at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1482)
    at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:525)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:765)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:251)
    at oracle.portal.provider.v2.render.http.AbstractResourceRenderer.renderBody(Unknown Source)
    at oracle.portal.provider.v2.render.RenderManager.render(Unknown Source)
    at it.csi.cultura.portal.CustomPortletInstance.render(CustomPortletInstance.java:46)
    at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.showPortlet(Unknown Source)
    at oracle.webdb.provider.v2.adapter.soapV1.ProviderAdapter.handleHttp(Unknown Source)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:324)
    at oracle.webdb.provider.v2.adapter.SOAPServlet.doHTTPCall(Unknown Source)
    at oracle.webdb.provider.v2.adapter.SOAPServlet.service(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:65)
    at it.csi.cultura.portal.UploadFilter.doFilter(UploadFilter.java:61)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:604)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:317)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:793)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:208)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].server.http.AJPRequestHandler.run(AJPRequestHandler.java:125)
    at com.evermind[Oracle Application Server Containers for J2EE 10g (9.0.4.1.0)].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:192)
    at java.lang.Thread.run(Thread.java:534)
    Have you any idea???
    Thanks

    Hi,
    A couple of thoughts:
    1. Have you asked in the Oracle Text forum?
    Text
    2. On which text index does this command fail? Have you checked to make sure this text index really does exist?
    Cheers,
    Colin
    PS The singular of 'Indices' is 'Index'.

  • Error while calling COM routines via application prog(return code 1028533-)

    Hello Expert,
    In Interactive Demand Planning ( /SAPAPO/SDP94 ), when I'm trying to load data in a planning book , error
    'Error while calling COM routines via application program (return code 1028533-)' is encountered.
    In my selection id, i have only two locations....there is no material selection. 
    When I select the 1st location and load the data its getting loaded properly.....but when i select the 2nd location and try loading data ...the above error is coming.
    I did run /SAPAPO/TS_LCM_CONS_CHECK but the problem persist.
    Any advise to fix this issue would be much appreciated.
    Thanks.
    Tom

    Hi Tom,
    Please see if below exiting threads help you.
    COM error 40134 in Interactive Planning on SCM 5.0 Support Pack SAPKY50011
    Error for COM Routine application program (return code 40028)
    Thukral

  • Stock Transport Scheduling Agreement - error message: 'Stock in transit...

    Stock Transport Scheduling Agreement - error message: 'Stock in transit exceeded'
    Hi, I do have a question about transport scheduling agreements.
    I have created a stock transport scheduling agreement via ME37, doc. type LU for a stock material from issuing plant TT01 to receiving plant TH01. The material is maintained in both plants.
    After that,I maintain the delivery schedule via ME38 for a quantity for today. The quantity is available at issuing plant TT01, checked via MMBE.
    Then, I try to post the goods via MIGO. When I try to post the document, I get the following error message: "PL Stock in transit exceeded by 1,000 T% : 794 TH01 S1". Why do I get that? My target is to decreate the stock quantity in TT01 and to increase the stock quantity in TH01.
    Thanks, Peter

    Hi,
    This happens when you are issuing more on the schudle qty, Check you have anything on the transit receive it the try agin to process the issue.
    Hope it helps.
    Suresh

  • Error in mru internal routine: ORA-20001

    Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "8845492C13CD535CF052A3C2441A41F3", item checksum = "9B2D18BBC17D51CBC5EEAC115693C8BB"., update "CPS"."TS_AX_TIME_STUDY" set "DRIVER_ID" = :b1, "ROUTE_TYPE" = :b2, "ROUTE_SUB_TYPE" = :b3, "ROUTE_NUMBER" = :b4, "ROUTE_NUMBER_MIDDAY" = :b5
    Exported application from apex.oracle.com. Imported to local apex deployment, local is running Application Express 3.0.1.00.07.
    This error occurs on only one page, and only on the local deployment.
    Any ideas?
    -chris

    Found the source of the problem. I had hidden the "Row Selector" on the master-detail report (for my purposes it was unneccessary), when re-introduced all was well again.
    thanks for looking
    -chris

  • LKM SAP BW to Oracle (SQLLDR) generates sintax error in ABAP code.

    Hi Experts,
    We are installing a SAP BW KM's in ODI 11g.
    Actually, we are able to make reverse ingeneering succesfully.
    Now we want to use the LKM in order to extract SAP data.
    The KM fails, in step Generate ABAP Code. The code is uploaded to SAP system but with sintaxis errors.
    That's the beginning of the SAPAbapExecuteOpenTool_8001_7001.log.
    +##################################################+
    +############ Open Tool Logger ####################+
    +##################################################+
    +############ Upload value: 1+
    +############ Execute value: 1+
    +############ BASE RKM FLAG: 0+
    +############ ZRFC_RUN_INSTALL: 1+
    +############ Abap Function Name: ZODI_8001_7001+
    +############ Sap Host Name: XXXXXXXX+
    +############ Sap User Name: XXXX+
    +############ Sap password: ********+
    +############ Sap Client: 100+
    +############ Sap language: ES+
    +############ Sap system no: 00+
    +############ Sap Connection Pool Name: SAP_ODI_LKM_POOL_GLOBAL+
    +############ Sap Connection Pool Size: 10+
    +############ Sap Function group name: ZODIBW_LKM_FGRP+
    +############ File Delimiter:+
    +############ File Name: ZODI_8001_7001.txt+
    +############ FTP Host: XXXXXXXXX+
    +############ FTP User: ftpbi+
    +############ FTP Password: ********+
    +############ FTP Passive Mode: 1+
    +############ FTP Transfer Time out: 100000+
    +############ User abap parameter names: IV_DELIMITER,CHAR1;IV_FILENAME,CHAR255;IV_USER,CHAR35;IV_PWD,CHAR35;IV_HOST,CHAR35;IV_HASHVALUE,CHAR35;IV_PATH,CHAR35;IV_REQUID_L,RSSID;IV_REQUID_H,RSSID+
    +############ Abap rfc table parameters: RETURN,BAPIRETURN;ET_FILE_RETURN,BAPIRET2+
    +############ Log File Name: /tmp/SAPAbapExecuteOpenTool_8001_7001.log+
    +############ OpenHub Path: /tmp/+
    +############ Delta Extraction First Request ID : 0+
    +############ Delta Extraction Last Request ID : 0+
    +############ SAP Development Class : ZODIBW_PCKG+
    +############ Max Row Count :+
    +############ Fetch Batch Size :+
    +############ Hash Value Marker: HVM+
    +############ Generated Program:+
    *** ODS DSO extraction
    TYPES: BEGIN OF ty_final,
    +/BIC/AZOFI_UTE00_/BIC/ZFI_SOCOR+
    TYPE
    +/BIC/AZOFI_UTE00-/BIC/ZFI_SOCOR,+
    +/BIC/AZOFI_UTE00_SOURSYSTEM+
    TYPE
    +/BIC/AZOFI_UTE00-SOURSYSTEM,+
    END OF ty_final.
    In the SAP GUI shows a sintaxis error.
    Functions Module ZODI_8001_7001. line 25
    The name "/BIC/AZOFI_UTE00_/BIC/ZFI_SOCOR" is longer that allowed.
    +30 characters.+
    Really the TYPE "/BIC/AZOFI_UTE00_/BIC/ZFI_SOCOR" has 31 characters.
    The sufix "/BIC/" is the "NAMESPACE", a SAP grouping concept.
    AZOFI_UTE00 is a table name.
    ZFI_SOCOR is a column name.
    Are this sufix correct in the APAP code?
    Has anyone had that problem?
    Any comment will be wellcome.
    Thank's in advance.

    Hi Somchai,
    r U able to resolve ur issue ..........i'm also struck there at the same point.
    I am using shared folder for file transfer and my error message is
    java.lang.RuntimeException: Error occured in open tool execute method...Error in executing ABAP program...Error in executing ABAP program...Error occurred when creating dataset\\<hostname>\bi-interface$\ZODI_11001_12001_GLOBAL.txt
    Thanks.
    Edited by: Drona on Mar 26, 2012 7:25 AM

  • Transport Release runtime error in BPC Netweaver 10.1

    Hi,
    We are getting the following error while releasing the transport in SAP BPC NW 10.1 Development system
    Category               ABAP Programming Error
    Runtime Errors         UNCAUGHT_EXCEPTION
    Except.                CX_RSBPCR_INTERNAL_EXCEPTION
    ABAP Program           CL_RSBPCR_RES_MANAGER=========CP
    Application Component  BW-PLA-BPC-INF-WP
    Short Text
        An exception has occurred that was not caught.
    What happened?
        Exception 'CX_RSBPCR_INTERNAL_EXCEPTION' was raised, but it was not caught
         anywhere along the
        call hierarchy.
        Since exceptions represent error situations, and this error was not
        adequately responded to, ABAP program 'CL_RSBPCR_RES_MANAGER=========CP' had
         to be terminated.
    We are on SAP BW 7.40 patch level 5. Could you please advice the reason for this?

    Hello,
    so after implementing note 2050531 you should add the following entry in table UJPS_RESOURCE (caution I misspelled it earlier, it is not ups_resource).
    You can do this through transaction SE16 -> enter UJPS_RESOURCE and hit Create Entries.
    Fields MANDT and APPSET_ID should be filled with your BW System Client ID (i.e. 100) and your BPC Environment ID (i.e. ENVIRONMENTSHELL). The entries that appear to be empty should be left empty.
    MANDT
    APPSET_ID
    RESOURCE_ID
    TSTPNM
    TIMESTMP
    OBJSTAT
    CONTREL
    CONTTIMESTMP
    OWNER
    BWAPPL
    ACTIVFL
    PARENT_RES_ID
    UPDATE_COUNTER
    RESOURCE_TYPE
    CREATE_USER
    CREATE_TIME
    ORIG_LANGU
    OWNER_ID
    OWNER_TYPE
    Client ID
    Your Environment ID
    005056B236881ED38AE1D894578A8F97
    0
    ACT
    0
    3
    0
    FOLDER
    0
    E
    005056B236881ED38AE1D894578A8F97
    TEAM
    After this you should be able to release your request.
    Hope this is helpful.

  • Master detail form Error in mru internal routine: ORA-20001

    Hi,
    i created a master-detail form with apex standrad wizard.
    Master e datail are on the same page.
    All works fine.
    My detail form contain some fields of my detail table.
    Now i added a link on detail form for call a form with all fields of my detail table.
    The link work fine.
    When i try to add row or update my detail form i receive the error
    Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-20001: ORA-20001: Current version of data in database has changed since user initiated update process. current checksum = "D472A2BF636CA11122F196B8A32B3DC8", item checksum
    Any help?
    Thanks in advance
    Lukx

    Lukx,
    I've just reproduced your what I believe you wanted and didn't receive any errors. Here are the steps I took.
    1) Used the wizards to create a Master Detail form (with Detail edit on the same page as the master and only showing 2 of the detail columns)
    2) Used the wizard to create a FORM ON A TABLE for my detail table allowing the user to edit all detail columns
    3) Created a "column link" column on the detail form of the Master Detail form which links to the FORM ON A TABLE, passing across the ID of the detail record.
    When I do this, everything seems to work perfectly as expected.
    Is there something I'm missing in the steps you performed to create your scenario?
    Thanks
    Doug
    http://www.sumneva.com

  • SQL Error: ORA-29902: error in executing ODCIIndexStart() routine

    I am running a SDO_RELATE operation on 2 geometries from 2 different tables. Spatial indexes are already created and the tables are also versioned.
    Below is the spatial meta data for both the geometries in user_sdo_geom_metadata table:
    DIMINFO is :
    MDSYS.SDO_DIM_ELEMENT(MDSYS.SDO_DIM_ELEMENT(Easting,0,700000,0.001),MDSYS.SDO_DIM_ELEMENT(Northing,0,1300000,0.001),MDSYS.SDO_DIM_ELEMENT(Height,-100,2000,0.001))
    SRID is 27700
    When I use SDO_RELATE or ADO_ANYINTERACT on both the geometires, i am getting the below error.
    Error report:
    SQL Error: ORA-29902: error in executing ODCIIndexStart() routine
    ORA-13243: specified operator is not supported for 3- or higher-dimensional R-tree
    ORA-06512: at "MDSYS.SDO_INDEX_METHOD_10I", line 333
    29902. 00000 - "error in executing ODCIIndexStart() routine"
    *Cause:    The execution of ODCIIndexStart routine caused an error.
    *Action:   Examine the error messages produced by the indextype code and
    take appropriate action.
    Could you please let me know what should be the root cause for this issue?

    Hi
    Have you checked this posting?
    Re: ORA-13243
    Luc

  • Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-01403:

    Hi All,
    I have an ADD ROW and SUBMIT button on my page in APEX. After i add a row or submit it the following error appears,
    Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-01403: no data found, update "APPS"."GAU_V" set "PK_FIELDS" = :b1, "SERVICELINEID" = :b2, "SERVICELINEDESC" = :b3, "SERVICEDISPLAYORDER" = :b4, "DIVISION" = :b5
    Error Unable to process update.
    OK
    I have the following select query under region definition :
    select
    "PK_FIELDS",
    "SERVICELINEID",
    "SERVICELINEDESC",
    "SERVICEDISPLAYORDER",
    "DIVISION",
    "STATUSID" // this column was added later in the query
    from "#OWNER#"."GAU_V"
    where "SERVICELINEID" like nvl(:P99_SERVICELINE,'%')
    Order by "SERVICELINEID"
    The region attributes has PK_FIELDS as a hidden column. Value in PK_FIELDS is same as SERVICELINEID column.
    Also the GAU_V view has an INSTEAD OF trigger for insert or update or delete.
    Please tell me the solution for this error..
    Its urgent..
    Regards,
    GTS

    Hi All,
    I have an ADD ROW and SUBMIT button on my page in APEX. After i add a row or submit it the following error appears,
    Error in mru internal routine: ORA-20001: Error in MRU: row= 1, ORA-01403: no data found, update "APPS"."GAU_V" set "PK_FIELDS" = :b1, "SERVICELINEID" = :b2, "SERVICELINEDESC" = :b3, "SERVICEDISPLAYORDER" = :b4, "DIVISION" = :b5
    Error Unable to process update.
    OK
    I have the following select query under region definition :
    select
    "PK_FIELDS",
    "SERVICELINEID",
    "SERVICELINEDESC",
    "SERVICEDISPLAYORDER",
    "DIVISION",
    "STATUSID" // this column was added later in the query
    from "#OWNER#"."GAU_V"
    where "SERVICELINEID" like nvl(:P99_SERVICELINE,'%')
    Order by "SERVICELINEID"
    The region attributes has PK_FIELDS as a hidden column. Value in PK_FIELDS is same as SERVICELINEID column.
    Also the GAU_V view has an INSTEAD OF trigger for insert or update or delete.
    Please tell me the solution for this error..
    Its urgent..
    Regards,
    GTS

Maybe you are looking for