Transport request main task releasing problem

Hi friends,
Environment is Linux, ECC5.0, Two system landscape,
I have problem with Transport Request task releasing when I am going to release the subtask that willbe released success fully when I am trying to releasing the main task that task is not released and at that time the system wil hang( mesg on the status bar is tp is connected success fully) thats it we wait for long time then also that looks thats only no log will be generating in usr/sap/trans/log there will be a log on this one that log is
WARNING:/usr/sap/trans/tmp/<username.LOS>is already in use (10), I'm waiting 3 sec(20070326124305). My name:pid 7265 on test(sd1adm)
after saw the this mesg I kill the 7265 pid then also same proablem.
I change the ownet of the request then the request is released but not uppeard in the import que. whn i am trying to import in que as manually that will appear in que but not importing when i press the import button the error is tp error 0203.
I check the both users authorizations also bothe authorizations also same then why it wil happening ???
then I check the nfc also that service also running ok the six services are 1.off 2.off 3.on 4. on 5.on 6.off.
I mount the trans dir also the mounting points also ok tms configuration is also ok
wt can i do plz help me with ur valuable suggessions
Thankyou
Ranjith

Hello Ranjith,
This is usually because the tp transport buffer lock file remains locked by the
operating system (OS).
You should be able to move or delete this file from the DIR_TRANS/tmp dir.
After that the tp should run fine after.
Thanks,
George

Similar Messages

Transport request and task releasing?

Hi all,
I've three systems dev,QA and prod.I'm working on dev client and I've a two reports(say A and B) under the same transport request with different tasks,If I want to release the report 'A',is it necessary that I shud be releasing th ewhoel request number or if I release the task it's enough.why a transport request will have different tasks,when the transportationof ht ese taks associated with the transport request is independent.
I've released the task to QA and the QA sytem had some problem and did nto get he task,what I shud be doing now,release the task again or ?
Can a report be assigned to different tasks(numbers) under the same transport request.can the report be assiged to different transport requests.please let me know.
thanks and regards
Message was edited by: henry

There is a transport route defined by your Basis Team for the transport scenarios. There, the possible ways through which request can be moved( from Dev --> QA & Dev --> Prod ) are defined.
But it does not mean that you can't transport your request to production without transporting it to QAS.
Furher, when you release a transport request, it does not automatically move to QAS or Production but someone from your Basis Team has to run the TP through Xn STMS, which in turn imports the objects from your Dev Request and put it on QAS / Production.
In case of any error encountered while importing to let's say QA, you need to check whether it's a problem with the transport buffer or is it because some objects are missing from the transports or dependent transports are not moved as yet.
Please understand that there is no concept of re-release.
You can only ask your Basis guy to re-import it.
According to the encountered problem, you need to decide whether you should just ask you Basis consultant to re-import the same Transport.
Or create a new request through SE10, and include all the objects from your last request. Release it and ask your Basis guy to import it to QAS.
Or first move the dependent transport and then ask your Basis guy to re-import your current transport.
Or create and group the changed objects, altogether in a new transport by changing all the objects which were contained in the original request.
Further, to your other queries, if two users are modifying the same program ( not exactly at the same time - that's not possible but one after other )then that program will be contained in two separate tasks of the same transport request.
I hope it answers a few of your queries.
Thanks,
Ram

How could we delete transport request and task(the released one)

Hello
We have a released transport task(not request). Transport request is not released.
How could we delete transport request and task(the released one). Namely we would not like to transport it to production

Hi, never delete directly in table.
There are more tables which depends each other...
Here, you can find nice example how to do it: Help on ABAP: Few Tips for Transport Request Manipulation
Using program: RDDIT076 and changing status.

Transport request not getting released

Hello Friends,
I am unable to release a transport request.
While releasing a transport request, it shows the following log in SE10. The export is not taking place.
========================================
Log Overview for DBBK911964
DBBK911964 All cubes
DBB Development (Maintenance Line)
Checks at Operating System Level
20.08.2007 13:30:58 (0) Successfully Completed
Export pre-processing
20.08.2007 13:31:01 (0) Successfully Completed
<b>Export
21.08.2007 07:51:11 In process: Requires update</b>
Import steps not specific to transport request
========================================
Kindly sugest what should be done.
Thanks & regards,
Kunal Patel.

Hi!
Child transport = (transport) task, parent transport = (transport) request.
Releasing the task (child) does not trigger any checks, the locks are just copied from the task to the request (parent).
Only when releasing a request checks are triggered (can be done beforehand via menu in SE09). Also this steps (would) copy the source into files, which are later imported in the target systems.
You have problems in one package (DEVC) and three reports, obviously because of Japanese characters. The possibility to print Japanese seems not to include to name objects in Japanese...
Your objects are ZA11 and 1021-1022 - here no Japanese is include, so it has to be something on lower levels.
Check the code and try English naming.
Regards,
Christian

Delete Transport request when task is released

Hi All,
Task is already released and i dont want this transport request.
i am trying to delete the transport request from se10. But unable to do that. i have unlocked the object for this request and when i try to delete the object it give an error to sort and compress the task and request.
But when i try for sort and compress for the task its says it is already released. How can we resolve and delete the request.
Please advise.

Is there any way we can delete it from the Object list , only the task is released not the actual request. I can see the entries in E070 table but it not recommanded to delete from this table.
When i try to delete it says the task need to sort and compress, When i try to compress it says the task is already released.
Any how the last option for this problem is to delete from the buffer once its released or delete the entries from the table.
But there must be some way, as only the task is released.
Please suggest.
Thank You,
SK.

Error within General Task: Register transport request in task list

Dear all,
I would like to register transports into a task list. When I try to do so I get the following error:
Error RFC destination SPROJECT_GET_SMI_DATA_R: Projekt: ZCHARM_DQ
Message no. /TMWFLOW/TASKLIST191
Some one got an idea where the problem might be?
Any help would be much appreciated.
Best regards
Daniel

Hi Daniel,
This error is reported in SDN blog /people/dolores.correa/blog/2009/07/22/change-request-management-scenario-usual-questions-and-known-errors
in point 21
21. Missing authorization for READ RFC connections
Our default authorizations for remote READ RFC users (created in SMSY) do not allow us to read transport requests information. But READ RFC users are used extensively in Charm to get those information. It is a bug in SMSY which has not been fixed by now. So currently for such kind of messages we have to ask our customer to manually add appropriate authorizations (e.g. profile S_TMW_CREATE) to those READ RFC users.
- Open transport requests are not marked as red when release them from task list.
Note 1279558 - Red Question Mark Icon Missing from Charm Transport Release
- "Error RFC destination SPROJECT_GET_SMI_DATA_R" when register outside transport requests into Charm.
Please assign enough authorizations to all those READ RFC users on their DEV system (including client 000).
- Cannot complete maintenance cycle due to "Error RFC destination /TMWFLOW/TL_COMPL_CHK_TR_WO_TL"
Please assign enough authorizations to all those READ RFC users on their DEV system (including client 000).
- Transport request information is missing in the result of Charm Reporting.
Please assign enough authorizations to all those READ RFC users on their DEV system (including client 000). And after that they should re-execute background job SM:TMWFLOW_CMSSYSCOL to update those information on Solution Manager system again.
Hope this helps,
Dolores

Transport Request Locks on release!!

Hello there,
I am facing one problem; When I create a transport request of a smart form and try releasing it, the request gets locked, thus failing the release.
I unlock the request via transport organizer tool (SE03), but again when I try to release the request, locking repeats.
Any solutions??
Thanks,
Sumit

Hi,
Plz. check client settings via scc4.
And check the owner of that request also via SE01.
Plz. let us know, are u facing this lock issue, only for this smart form only or for all other requests also??
Note: Points will always encourage me to reply!!

Transport request not getting released by se10

Dear all,
I am trying to release transport request of development server via. transaction se10.Now my problem is that the child(DEVELOPMENT/CORRECTION) is getting released while the parent request is not getting released.
I checked everything and its showing 'test call of transport control program ended with return code 0208.' I even checked overview of system,overview of connection type,over view of transport protocol and they are fine.my only doubt is after going to se10 when I click transport proposals its showing "WORK FLOW NOT ACTIVE' .
Is my problem is because of this. Please help its very urgent as due to this I am not even able to transport any request on production server.
Helpful contribution will be duly rewarded.
Thanks & Regards,
VICKY

Are you the owner and in the right client ?
use SWU3 to activate/configure WORKFLOW.

Transport request in PR release strategy

Hi Experts,
While configuring characteristics and classes for release strategy in PR, system is not giving prompt for transport request.
What could be the reason? Is it standard functionality or something has to be done at our end.
Kindly suggest
Rgda

Hi,
Check the following SAP notes.
10745
45951
86900
Hope it helps,
Regards,

How to find the transport request which was released to Quality

Hi Friends,
Could anyone please let me know, how to find the transport request that was already released from Development to Quality?
there was some change in customization took place. I could find the user (through change log) who made these changes, however I could not find the transport request number he has already released. I did give his user name in SE10 and checked the released checkbox and did click transports to see them, however I found nothing. A message got displayed on the screen: Cross-system information for user xxx. I can't ask the Basis people about it, as its not yet been trasnported to Productive.
Is this the correct way to see the transport request number? Is there any other way to find the number. I can give the tentative dates when the change was released.
This post might already posted before, I did some search, could not find the exact info what I am looking for. Would appreaciate if anyone could give the step by step method to find it.
Thanks in advance.
BR,
Sats.

Ram,
let me tell you the the situation in a better way.
When I see se10 with my user id I could see all the transport requests that I have released. However, now when I enter my colleague user id who did these changes (he is on vacation, otherwise I could simply ask him the transport number), nothing is shown on the page. in simple words the page is completely blank. Initially I thought it is because of some authorizations, but I can get the transport request numbers that are released by another user.
the info what I have right now are:
1. I knew the user name who did these chages
2. I knew the date when it was changed.
I just need the Transport Request number I mean which starts with DEVXXXXXXX.
As per your solution --> If you have any idea when the reques was relase you can select the request and click on goto-transport logs. This way you can find out the request. --> I knew the date when it was released, but didnt understand, the bold and underlined sentense in your answer.. select on which request? as I said, the page was blank after I enter his user id and activate it.. May be I did not understnd your solution properly. Could you please simplify it.
Thanks a bunch in advance
Sats.

How to retreive Transport request that is released

hi,
I have released few transport requests from R3 Dev system, to R3 QA system.
In Dev system it is showing that requests are released successfully.
But in QA system, under transaction STMS, these requests are not displayed.
Looking for a help..

Hi Saurabh,
You can add these requestes to QA import queue.
Goto STMS -->> QA Import Queue -->> From Menu Extras -->> Other Requests -->> Add -->> Provide Request No.
Hope it Helps
Srini

Transport Request and Task

Hi,
Can someone explain a basic, when we transport a BI object, we see 2 things in se10/se09- one request and the other one task.
My question:
1. What is the significance of each of them and the use?
2. What process should be followed here and what sequence.
-TC

Ok.
Here is what I understand from youre replies above-
1. A request can have multiple tasks and each tasks corresponds to the work that is being transported.
2. One needs to release the tasks before we can release a request.
Suppose now, I have the following scenario:
I have changed an infoobject(ZABC) being used in multiple cubes (A,B,C). In this scenario how do I go about it. I understand that I need to transport and import the infoobject first and then the cubes.
So if I am working on a Transport Connection in RSA1. What would be the steps? I am writing the steps, correct me if I am wrong-
1. I select the infoobject and drag it to the right screen. I press the truck symbol and mention the package.
2. I drag the Cube A and press the truck symbol and mention the package
3. Same thing for other cubes.
Please let me know the optimum way.
-TC

Problem with the transport request

A request was released to Prod.
In D and Q the request is success but in P it shows one error..
so, we tried to create a new request and copy the objects from the old one.
but v r gettiing the objects not below the task(in req) but below the req..
so it is not possible for me to release it.
I also tried to edit the code , but when i saved it it is not asking for a new request. is it bcoz old req is released to P?

Hi,
In production system, it is showing an error in the logs while transporting : Generation of Programs and Screen and return an error code 8. there are no repositary objects to transport. this is just simple code modification. In Quality and Dev system, transportation was done successfully with out causing any problem.
So, we tried to create a new transport request by editing the code in development.however it is not asking for the new transport request number while saving or activating.
Also, we tried to create a new TR manually using SE09 and placing the modified objects under the task. but, transport request and task number are getting created at a time and while assigning the objects, the objects are under the request not under the task.the objects should be under the task only.
this is the problem what exactly we are getting. Please clarify..
Thansk!!!

Tables in ChaRM- Transport Request & Tasks

Hi,
Need the table name which contains the Transport Request details & Tasks( In Transport Request) with statuses in solution manager and not in R/3.
In which table we get the details.
Regards
PK

Hi PK,
as you have E071, E07a... in satellite systems you have the same in Solman for transport requests of ChaRM.
All of them start with /TMWFLOW/REPExxx
For example E071 become /TMWFLOW/REPE71O or /TMWFLOW/REPE71R
I dont remember exactely whats the differeence between both. Does it refer to Open and Release. I ll let you confirm that cause i don t have ChaRM on my Solman here.
One more thing; if it s for reporting matters; be aware that they are not always as up to date as the ones in satellite
Threre is a job on your Solman that must be planned that updates them regularly. This job is something like cmssyscol2 if i remember well
Hope this helps
Regards
Khalil

Transport Request & Task

Hi ,
I have a transport request with tasks assigned to it . I need to put all the Tasks that are in my Transport Request into another persons Transport Request . Share me your inputs please . Thanks in advance .
Regards,
Ry

Hi,
Go to Transaction SE10 --> Enter Request number to which you want to add your task --> Go to Tab Request/Task --> object List --> Include object.
Add your task request here.
then delete this task request from you orignal object list.
hope this helps.
Regards,
Nikhil

Transport request main task releasing problem

Similar Messages

Maybe you are looking for