Transport script

hi..sap gurus..
how to transport the script and smart form..

SAP Scripts are client-dependent objects. Hence, they may often require to be downloaded from or uploaded to SAP system
Following programs can be used to download from/upload to SAP System
RSTXR3TR To EXPORT/IMPORT layout set (FORM) using a Transport Request (CTS)
RSTXSCRP To EXPORT/IMPORT layout set (FORM), Style, Standard Text or Device Type without using a Transport Request
Cheers
VJ

Similar Messages

How to transport scripts and smartforms layouts

Hi All,
would you let me know how to trasport scripts and smartform along with layouts???
thanks in advance for your replies.
Regards,
Riyaz

SAP Script Form
If you want to copy the forms between clients on the same system (between a client 100 and 150 on a DEV box for example) Use the copy between clients option available from the Utilities menu of SE71. If you want to transport the form between DEV & QA or QA & PRD then follow the normal transport
procedure (ensuring that your BASIS team know to import your form into each client of the new box).
Regarding the Print Program, follow the standard procedure for normal ABAP Objects. Do SCC1 for transfer between clients on same system and normal transport procedure to different system.
SMART FORMS
A Smartform is transported no differently than any other object. if it is assigned to a development class that is atteched to a transport layer, it will be transported.
The definition is transported, and when called, the function module is regenerated.
This leads to an interetsing situation. On the new machine, it is very likely the function module name will be different than the name on the source system. Make sure, before you call the function module, you resolve the external name to the internal name using the 'SSF_FUNCTION_MODULE_NAME' function module.
Typically, generate the SF, then use the pattern to being in the interface. Then change the call function to use the name you get back from the above function module.
Hope this helps.
Vinodh Balakrishnan

Transport Script Logic not posting zero's

Hi Guys,
I have a piece of transport logic that is supposed to transport data from the TRAVEL cube to the Finance cube. The problem is that in some months the users do not have people travelling and only a zero should be transported across to Finance and clear the data that is sitting there. Unfortunately the zero's are being transported across
I even force the accounts to be zero before populating them, but that doesn't work
Here follows my code, please let me know if you can spot anything:
Edited by: Gert Andries van den Berg on May 29, 2009 3:37 PM

In theory, *clear_destination should work across applications, and I've successfully used it that way once or twice. But it's always been a challenge for me to figure out exactly what scoping instructions are required. Plus, I've needed to play with the *calculate_difference option, not sure if it should = 0 or 1, to get the expected results.
Plus, the behavior seems to have changed somewhere along the way, between versions 5.0 and 5.1 SP8.
I may be wrong, but I don't think that the NOADD specifically is going to solve the problem where a zero value in the source app isn't being properly updated to a zero value in the destination app. I've found this problem is a lot easier to resolve if the transfer is being done in the source app's default logic, since that somehow includes the scoping of that zero-value account in the transfer logic. When the transfer logic is run as a batch process (after the value has already been set to zero), it's impossible sometimes to get the logic to generate that zero-value record.
So instead, I've played around with ideas such as a script logic in the destination app, that just clears out the entire region of data that is to be transferred, and then re-transfer everything. I'm sure that this is horribly inefficient, and I'm not really happy with that design, but I haven't come across a better solution.
Regarding the *select's: Correct, these are not "by commit". The commit clears the source data region that was scoped out and was read into memory from the fact tables, during the logic run-time. The select, however, is evaluated at logic validation-time (along with any for/next loops), and the variables are replaced then.
It's not possible to assign some variable %foo% one value "2009" in a select (on line 10), then use it (on line 15), and then assign the same variable a second value "2010" (on line 20), and use it (on line 25). I've never bothered to test this out, but I'm certain that both lines 15 and 25 will see the variable replaced with the same value. My guess is that both would have the value of 2010, the final select.

Interactive Scripting Transport

Hi experts
I have created the interactive scripts in Dev System. I have used transport icon in ISE to transport from Dev to QA. But, when i have imported in Quality, Branching action (which is included in script) is missing / not got transported. I have transported the relevant ABAP class first, before transporting the actual scripts.
Can anyone guide me what is the best practice for scripting transport.
1) Is there anything i have missed?
2) How does delta-transport will work? Means, if i makes any change in Dev and transports again to QA, how it behaves?
3) What is the approach to transport Scripts that contain Branching/Non-branching actions?
4) Once transport is finished, can i activate the script again in Dev? Does it impact anything?
I would appreciate your expert help in this regard.
Thank you
Surya

Hi Surya,
Very valid questions asked and I feel disappointed that despite 4 yrs, I still stand at same place where you were in 2010. I also have the exact questions as I could not find any proper document related to IS transports. There many ifs and buts and dos and don't and with my experience in SAP CRM, I generally prefer to find the right ways and learn from the lessons others might have learnt when trying the same thing.
Can you please advice from your experience your take on the approach and procedure for IS transports for these questions ?
Thank you so much in advance.
Best Regards
Suchita

Transporting SAP Script to Development Server

hi friends...
i have modified a standard SAPScript layout for VF03 ( Billing Document ). Now i want to transport it to Development server . I am working in SAP 5.0.
Regards
Sharadha

Hi Sharadha,
Use the program RSTXTRAN(SE38 program) to transport script.
Regards,
Vijay.

Attaching Transport Req to SAP Script

Hi All,
When i changed the sap script in DEV server, the system is not asking for Transport Request number.
Now, i have to attache it a TR and then move the same to Quality....
How to do it.....????
Regards
Pavan

hi,
goto SE03 select change object directory entries - execute.
give as form formname and execute.
select ur form and click object directory save in package it will ask request.
now u can use this request to transport to quality.
the other alternative is u can use program RSTXFCPY to transport scripts between clients.

How 2 transprot script to smartforms.

How 2 transport script to smartforms. send me the possibilities

Trx SMARTFORMS: Utilities->Migrate Sapscript Form
In this way the system'll create a smartform based on the original SAPSCRIPT, but it can only generate the sapscript parts: Text Element, Windows, pages .......
Best Regards,
Vibha
*Please mark all the helpful answers

Transport objs

i like to know the scenario on offshore work assignments. that includes development class, work requist id and workbench etc.,
i need to know how objects are transported at offshore develoopment. while working with sapscript and std texts using so10 how these objects are transported

to transport Standard text,
you can use RSTXTRAN.
Give the values to the below fields
Text key - object TEXT
Text key - name ZSRIM <--yourtext name
Text key - ID ST
Text key - language EN
then execute it
select the line appears in this screen and say ENTER-> now you will see another screen with 'TRANSFER TEXT TO CORRECTION' button appears on the application toolbar.
click on that button
now it will asks you to create a new request/you can use existing request too. and say enter.
check this link, to know about this more,
SO10 transpot from 1 client to the other.
for transporting SCRIPT
when ever you create/change script layout in SE71,it will asks you the development class->give a transportable development class name here and then say enter->it will then ask you to enter trasport request.
you can use SE09 to release the requests
Regards
srikanth
Message was edited by: Srikanth Kidambi

BPC transport

Thanks for all information.
When I did the transports, I have seen that dimension members were not transported and I was required to recreate it allover.
After doing the first transport, when I do the transport for 2nd time the whole appset is copied? Does that empty the existing dimension members or transaction data?
If so what is the precaution to be taken, while doing transport of second time.
Appreciate inputs..

Hi,
In SAP BPC NW 7.0 when we transport the Full Appset, it does not transport Master & Transaction Data. Usually Transaction data in Production Environments will always be different from Dev/Test environment. So it need not be transported. When a transport is imported, system checks table UJT_TRANS_CHG (t.code SM30) in the target system. It does not transport this relevant configuration if the entry is set to PRODUCTION. It only imports the configuration for entries set to DEVELOPMENT.
When we transport Script logics and Business Rules, we should be careful that the Master Data is in Sync between Development, Testing and Production environments. Because, Logic files/Rules will not work if the hardcoded Dimension Members are not available or different in Production.
Please refer SAP's 'Operations Guide SAP Business Planning and Consolidation 7.0 version for SAP NetWeaver' which is available on Service Market Place. This document is very clear and detailed on Transport Management and will clarify most of your queries.

Script convert to local language

Hi All,
I am trying to convert the FORM to local language.
My form is in 'EN' original lang. While i was trying to convert to Japaneese language SE71>Utilities-> convet original language--->EN to JA.
I am getting error message that 'Form does not exists in language JA'.
Please suggest me to move further.
Thanks in advance.
Deepak.
Message was edited by:
KDeepak

HI
check with the following options. Hope one of them helps...
Go to Transaction SE76 and mention the form name you to convert Sorce language will be DE by default so mention the language you want to change.For tht go to target lang option and change in the language you require and say change or create and activate
or..
Goto SE72, Create a new script with the Target Language ( say JA ).
Click STYLE -> Copy From ... Provide the name of the script and language ( Say EN) from which you want to copy.
Activate it.
or
Hi,
also use SCC1 transaction to transport scripts
from client to another client
RSTXTRAN to assign standard text to request
regards,
dinesh

Mailman + Postfix - User unknown

Hi all, I'm having some trouble installing mailman (who doesn't?) right now.
I tried everything. I followed EXACTLY what is said on our wiki (https://wiki.archlinux.org/index.php/Mailman) but still it's not working.
Actually the only thing that is not working is 'sending an email to the mailing list'. And this is quite important for a mailing list, I guess.
After spending hours trying, here is my current status:
I created a mailing list called pynochio, with [email protected] as the mailing list address.
Postfix reads my /var/lib/mailman/data/virtual-mailman file and applies the mapping. I'm sure about that because I changed the content of virtual-mailman (and then hashed it using postmap command) and the email postfix was trying to authenticate changed. (so there is no permission issue from this side)
But then postfix concludes that the user doesn't exist. Here are fresh logs from journalctl, just for you:
Mar 20 19:59:53 ks3100290 postfix/qmgr[26527]: 128382077C: from=<[email protected]>, size=1775, nrcpt=2 (queue active)
Mar 20 19:59:53 ks3100290 postfix/trivial-rewrite[26562]: warning: do not list domain too.gy in BOTH mydestination and virtual_mailbox_domains
Mar 20 19:59:53 ks3100290 postfix/trivial-rewrite[26562]: warning: do not list domain too.gy in BOTH mydestination and virtual_mailbox_domains
Mar 20 19:59:53 ks3100290 postfix/virtual[26567]: 128382077C: to=<[email protected]>, relay=virtual, delay=0.74, delays=0.65/0.03/0/0.07, dsn=5.1.1, status=bounced (unknown user: "[email protected]")
Mar 20 19:59:53 ks3100290 postfix/virtual[26567]: 128382077C: to=<[email protected]>, relay=virtual, delay=0.78, delays=0.65/0.03/0/0.1, dsn=2.0.0, status=sent (delivered to maildir)
This warning appears because in the tutorial we are said to put `too.gy` (our domain) in mydestination and because in my postfix database inside the `domain` table, `too.gy` is said to be virtual (transport=virtual). I don't know if it should be that way.
My problem is that I don't really know how postfix and mailman are supposed to communicate. Postfix is supposed to let mailman handle things since [email protected] is a list address but it doesn't.
I read some tutorials (on other distribs) and they are using lists.too.gy domain for their lists address (it seems easier) but it looks like there's a better way to do it and in the archlinux mailman documentation, we are not using such subdomain for our lists. So I want to do it the right, archlinux way.
There is `postfix_to_mailman.py` transport script thing but I read it's a bad practice...
Here is the output of `postconf -n` (which respects the mailman tutorial, once again):
alias_database = $alias_maps
alias_maps = hash:/etc/postfix/aliases, hash:/var/lib/mailman/data/aliases
broken_sasl_auth_clients = yes
command_directory = /usr/bin
config_directory = /etc/postfix
daemon_directory = /usr/lib/postfix
data_directory = /var/lib/postfix
debug_peer_level = 2
debugger_command = PATH=/bin:/usr/bin:/usr/local/bin:/usr/X11R6/bin ddd $daemon_directory/$process_name $process_id & sleep 5
html_directory = no
inet_protocols = ipv4
local_recipient_maps = $alias_maps
local_transport = virtual
mail_owner = postfix
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
mydestination = localhost, too.gy
mydomain = too.gy
myhostname = mail.too.gy
mynetworks_style = host
myorigin = $mydomain
newaliases_path = /usr/bin/newaliases
queue_directory = /var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relay_recipient_maps = hash:/var/lib/mailman/data/virtual-mailman
sample_directory = /etc/postfix/sample
sendmail_path = /usr/bin/sendmail
setgid_group = postdrop
smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_relay_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination
smtpd_sasl_auth_enable = yes
smtpd_sasl_local_domain = $mydomain
smtpd_sasl_path = /var/run/dovecot/auth-client
smtpd_sasl_security_options = noanonymous
smtpd_sasl_tls_security_options = $smtpd_sasl_security_options
smtpd_sasl_type = dovecot
smtpd_tls_auth_only = yes
smtpd_tls_cert_file = /etc/ssl/private/server.crt
smtpd_tls_key_file = /etc/ssl/private/server.key
smtpd_tls_loglevel = 1
transport_maps = hash:/etc/postfix/transport
unknown_local_recipient_reject_code = 550
virtual_alias_maps = hash:/etc/postfix/virtual, proxy:mysql:/etc/postfix/virtual_alias_maps.cf, hash:/var/lib/mailman/data/virtual-mailman
virtual_gid_maps = static:5000
virtual_mailbox_base = /home/vmail
virtual_mailbox_domains = proxy:mysql:/etc/postfix/virtual_domains_maps.cf
virtual_mailbox_limit = 512000000
virtual_mailbox_maps = proxy:mysql:/etc/postfix/virtual_mailbox_maps.cf
virtual_minimum_uid = 5000
virtual_transport = virtual
virtual_uid_maps = static:5000
Any help appreciated. I'm on it since 10 hours, I don't want to kill myself.
EDIT: Forgot my `/etc/mailman/mm_cfg.py` >
# -*- python -*-
from Defaults import *
DEFAULT_URL_HOST = 'lists.too.gy'
DEFAULT_EMAIL_HOST = 'too.gy'
MTA = 'Postfix'
VIRTUAL_HOSTS.clear()
add_virtualhost(DEFAULT_URL_HOST, DEFAULT_EMAIL_HOST)
POSTFIX_STYLE_VIRTUAL_DOMAINS = ['too.gy']
DEFAULT_URL_PATTERN = 'http://%s/'
PUBLIC_ARCHIVE_URL = 'http://%(hostname)s/archives/%(listname)s'
MAILMAN_SITE_LIST = 'mailman'
Last edited by toogy (2014-03-20 19:23:23)

AlanNYC wrote:
If I turn off local recipient checking, will I actually get my mail?
Yes, all email properly addressed should be delivered to you without problems.
The line only affects improperly addressed email, in this case allowing them to be accepted instead of rejected.
Since you are running Spamassassin and an IMAP server, I suggest also using the line
luser=[email protected]
which will send all improperly addressed mail to the address specified by "[email protected]". This is what I meant by "catch-all" address.
If you find postfix giving you problems after adding the lines, simply delete them or comment them out by adding a hash mark to the front of the line, e.g.
#localrecipientmaps =
Alternatively, you can simply make no changes and allow the log messages to accumulate. The messages mean that postfix is doing its job by rejecting email addressed to users that don't exist. The above steps allow you to receive mail addressed to [email protected], where "anything" is any string allowed in an email address.
I assume you're testing your changes using a separate email account, but in case you're not: sign up for a free email account with any of a number of free email services (Gmail, Yahoo) and test your postfix install as you make changes using the free account.

RMAN with OMF

HI ,
Iam using oracle 10.2.0.4 and want to take an rman backup with file conversion option. This is what i used:
convert database
transport script '/home/oracle/transport_FCCEGM.sql'
new database 'FCCEGM'
to platform 'HP-UX (64-bit)'
parallelism 4
format '/home/oracle/fccegm.ora'
db_file_name_convert '/usr/oradata/FCCEGM1/datafile','/usr/oradata/FCCEGM1/rman/';
It complains about my oracle managed file:
RMAN-03009: failure of backup command on ORA_DISK_2 channel at 08/06/2009 13:05:08
ORA-01276: Cannot add file /usr/oradata/FCCEGM1/rman//o1_mf_fcc_data_572ohgtg_.dbf. File has an Oracle Managed Files file name.
My work around is this(remove this part :db_file_name_convert '/usr/oradata/FCCEGM1/datafile','/usr/oradata/FCCEGM1/rman/'; )
so i run this:
convert database
transport script '/home/oracle/transport_FCCEGM.sql'
new database 'FCCEGM'
to platform 'HP-UX (64-bit)'
parallelism 4
format '/home/oracle/fccegm.ora'
It is working but of course the converted file destination is the same as the source. Their is a lot of file.
How can i used Rman backup with oracle managed file and specified the destination?
regards,
F.KABORE

The Oracle docs are a marvelous resource. You will find them at http://tahiti.oracle.com.
It took me less than 15 seconds to find this:
http://download.oracle.com/docs/cd/B28359_01/backup.111/b28273/rcmsubcl007.htm#RCMRF196
if the source files for these operations are Oracle-managed files, then you cannot use
fileNameConversionSpec to convert the source filenames into new output filenames.
For Oracle-managed files, either in Automated Storage Management (ASM) or in
ordinary file system storage, the database must be allowed to generate the filenames
for the output files.

Migrate Oracle 11g database from Windows To Linux using RMAN hot / cold backup ?

Hi Friends,
Is it possible to Migrate Oracle 11g database from Windows To Linux using RMAN hot / cold backup ? ( as i would like to perform Point In Time recovery)
(or) The only way is to use RMAN convert as mentioned here - Transporting Data Across Platforms
(or) Is there any other method (except exp/imp and data pump)
Regards,
DB

HI
his post describes the procedure required to migrate a database from Windows to Linux using the RMAN Convert Database command.
Both Windows and Linux platforms have the same endian format, which makes possible to transfer the whole database, making the migration process very straightforward and simple.
To migrate between platforms that have a different endian format, Cross Platform Transportable Tablespaces (XTTS) needs to be used instead.
List of Steps Needed to Complete the Migration
The migration process is simple, but as it has several steps it is convenient to be familiar with them before running it.
1. Check platform compatibility between source and target OS
2. Start the database in read only mode
3. Check database readiness for transport from Windows to Linux using DBMS_TDB.CHECK_DB
4. Check if there are any external objects
5. Execute the Rman Convert database command
6. Copy converted datafiles, generated Transport Script and Parameter File to Linux
7. Edit the init.ora for the new database
8. Edit the Transport Script and Parameter File changing the windows paths to Linux Paths
9. Execute the Transport Script
10.Change the Database ID
11.Check database integrity
Thank you

SAP "Z" Script Transport from DEV -- TO-- QTY Server

Experts....
We have created a Z SAP Script. in DEVELOPMENT CLIENT : 100
We have successfully transported the changes from DEVELOPMENT CLIENT to UNIT TESTING CLIENT 120 in the same system thru SCC1.
UNIT TESTING RESULTS are OK, and our DEVELOPER has given a request to import into production.
But we imported the request, But changes are not reflecting in QUALITY.
I found below thread but i failed to understand...the last steps...
Can any one please help in this regard.
SAP Script transport issue
Rgds

Finally.....We could able to close this....
Weunderstood....to do inital fill in target client we do it from "000" clinet to "XXX" target clinet
once it is available ..the rest all goes with CLASSIC TRANSPORT APPROACH.
Not sure why the inital Transport request with changed did nor worked.
With the help of ABAP Expert...we just reactivated the in SE71 and added into request
imported the request into Quality & Worked..
When the inital fill is completed for SAP Standard ,
the rest of changes to is managed thru SAP Classic Transport Method.
For "Z" script..even no where connected with "000" client.
As we fixed with above assumptions...we conclude as above....
i request any expert to correct us if our assumptions in wrong direction.
Rgds

Problem in Transporting ZTABLE and SCRIPT

Hi Experts,
 I am an ABAP Developer. We have developed a Custom Script ZSCRIPT which fetches data from a ZTABLE. The problem here is when I am trying to transport the Objects from Development Server to Quality the ZTABLE and ZSCRIPT are not getting transported, i.e the changes that we have made in Development are not taking effect in the Quality.
Could anyone give me valuable solutions for the above stated problem.
Thanks
AK

Hai Kumar,
first take the request number.
goto se01->give request number
you will get all two numbers:
first release the sub-level, then release the top level.
now it is relaesed from development and u can check it in quality.
cheers,
madhu

Transport script

Similar Messages

Maybe you are looking for