Transport translations of all messages in a custom message class

Hi all
<u>Prerequisites:</u>
I've created a message class nad fill it with more than 100 messages.
I also translated all of them in another language.
I have no access to another system to import the transport for test purposes :(.
<u>Question:</u>
How to create a transport for all the translations excluding the option to include them one by one in SE09->display object list
PgmID  Obj. Type  Object name
LANG     MESS      <message>   ?
Is it enough to create a transport of the whole class in SE09->display object list
PgmID  Obj. Type  Object name
R3TR      MSAG     <message_class>   ?
Does such transport include all available translations?
<b>Thanks in advance for all answers! </b>

Use SE63.
Search forum for more related queries.
Its advisable to search the forum before posting the queries.

Similar Messages

  • Bulk messages upload and custom messages

    Hi guys, I need a way to import a bulk of messages into Nokia Pc Suite,  and for the suite to send them for me with a custom message
    so lets say I have an excel sheet,   in row A,  I have 200 mobile numbers,  Row B I have 200 Ref numbers, I would like to import that into the suite so it send a text to all 200 numbers,  and it will insert the Ref number out of Row B with the message
    so I have a custom message like this
    Hi, Please call us on xxxxxxxxxxx please quote your order number [rowb] to get an extra 15% off!!
    It would then send the texts for me to all 200 mobile numbers and the ref out of row B ( which I want to be whatever I put in
    Does nokia support this?
    Thanks

    I too could do with the answer to this but judging by the date of 'stokie21's' post, there is no answer / it's not possible?

  • OBIEE 11g - Customized Message for No result On all Reports

    Hi,
    The default messages displayed is getting displayed when a report returns no data in OBIEE 11g. I am aware of that, we can overide the default message with our Custom message at "Analysis" level. but it is very painful to do.
    I am looking for a file where we can override the default messages with our custom message at one place.
    Also, I have gone through the below link for this but it has change at the language level. I tried to change it at language "l_en" level but it did not work.
    can anyone suggest for 11g?
    http://obiee10grevisited.blogspot.com/2012/02/customized-message-for-no-result-on-all.html
    Edited by: Nagen on May 6, 2013 4:36 PM

    Hi Nagen,
    Using a custom message should also work in 11g. Refer to this link for setting up custom messages in 11g.
    http://www.rittmanmead.com/2010/12/oracle-bi-ee-11g-styles-skins-custom-xml-messages/
    Thanks,
    Gaurav

  • Long Text of a custom message class on a pop up screen

    Hi All,
    I have a custom message class and i have few custom messages with short text and long texts.
    Then i have a ALV report output which displays the message class and message number and my requirement is when i do F1 on the message number i want the long text to be displayed on a popup screen
    Can anyone give me an idea as how to approach this
    Thanks in advance

    hi,
    try the below code.
    DATA: HELPINFO LIKE HELP_INFO.
    DATA: LONGTEXT LIKE TLINE OCCURS 1 WITH HEADER LINE.
    DATA: EXCLUDEFUN LIKE SY-UCOMM OCCURS 1 WITH HEADER LINE.
          longtext-tdline = 'Sales Order test help'.
          append longtext.
    CALL FUNCTION 'HELP_DOCULINES_SHOW'
      EXPORTING
       CUCOL                   = 10
       CUROW                   = 3
        HELP_INFOS              = HELPINFO
       LINENR                  = 1
      TABLES
        EXCLUDEFUN              = EXCLUDEFUN
        HELPLINES               = LONGTEXT

  • Overwrite Standard Validation message to Custom message

    Hello Gurus,
    I searched and have gone through lot of resources but did not find solution and came up with this question.
    I have a scenario where I can not make action(Save) as validation independent. So, I tried using IF_WD_MESSAGE_MANAGER methods in WDDOBEFOREACTION as below.
    1) Used HAS_VALIDATION_ERRORS If true got all the messages using method GET_MESSAGES.
    2) Loop through messages of perticular attribute and deleted message based on MSG_ID using REMOVE_MESSAGE.
    3) And tried to set custom error message using REPORT_ATTRIBUTE_ERROR_MESSAGE.
    But to my suprise IF_WD_MESSAGE_MANAGER->GET_MESSAGES is not returning any messages even though there exists a validation erro, though HAS_VALIDATION_ERRORS returning TRUE.
    Cant we make use of GET_MESSAGES in WDDOBEFOREACTION or anything wrong in my logic.
    Any inputs would be appreciated!
    Thanks a ton in advance!
    Regards,
    Pavan.
    Edited by: Pavankumar Adiraju on Aug 1, 2011 6:42 AM

    Thanks for the response!!
    @ Srinivas: Sorry, I missed one more step wherein I use message object(MSG_OBJECT) of messages returned by GET_MESSAGES to get the specific message using GET_TEXT.
    So, to rephrase I will only overwrite specific error message with my custom message.
    @ Kranthi : Before posting the question I found the forum suggestion you mentioned but did not find a way to get reference to it.
    Please tell me if you know how to get reference of IF_WD_VALIDATION in WDDOBEFOREVALIDATION to use it.
    Regards,
    Pavan.

  • DISPLAY ONLY CUSTOM MESSAGE WITH SRW.MESSAGE

    Hi.I created a report with Report Builder 9i.I also created two form parameters of type date.I put inside the validation trigger in the property inspector the following plsql code.
    function FROM_DATEValidTrigger return boolean is
    v_date VARCHAR2(12);
    date1 date;
    begin
    v_date := :from_date;
    date1:=TO_DATE(v_date, 'DD/MM/YYYY');
    return (TRUE);
    EXCEPTION
    WHEN OTHERS THEN
    SRW.MESSAGE(546,'My Message');
    return (FALSE);
    end;
    This code works fine.Supose the user input wrong data for example 29/02/2003 displays an alert message
    with my custom message.But after this displays an another message from the Report Builder like this:
    Rep-0546:Invalid parameter input.
    My question is .Is it possible display only my custom message with the SRW.MESSAGE built in procedure?
    Thanks in advance Panagiotis.

    Hi,
    I am using this function in my Validation process to display Error when user gives null input
    function DEPT_IDValidTrigger return boolean is
    begin
         -- Check for Null Value here
         if(:DEPT_ID is null) then
         raise SRW.NULL_ARGUMENTS;
         else
    return true;
    end if;
         Exception
              -- Exception For Null Value
    when SRW.NULL_ARGUMENTS then
         srw.message(100, 'Please Enter Dept ID');
    raise srw.program_abort;
    end function ___ ;
    Function is correct but the error message i am getting at the client side is as follows ::
    "*MSG-00100: Please enter Dept IDREP-1419: 'dept_idvalidtrigger': PL/SQL program aborted.* "
    It seems it is adding some system level error.
    but i want only my custom message to be displayed on the client side ::
    *"Please Enter Dept ID"*
    Is this Possible in Oracle 6i.

  • Can we modify the standard AOL Message with custom Message in Seeded Page?

    Hi,
    I have a requirement to change AOL Message with custom Message in Seeded Page.
    In a seeded OAF page when a user clicks on a submit button a standard AOL Processing Message is populated.
    I Need to change the Standard Message and call Custom Message.
    Did controller extension and found that both the messages are populating.
    called the code after super and tried to call before super also.
    Did any one face this issue and resolved it. Kindly provide the solution.
    Regards
    Chaitanya

    Hi Gyan,
    I have tried by extending a sample custom controller.
    Below is the code of TestCO calling create message
      public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
        super.processFormRequest(pageContext, webBean);
          OAApplicationModule am = pageContext.getApplicationModule(webBean);
          if (pageContext.getParameter("Test") != null)
              OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_CREATE_CONFIRM",    null,
              OAException.CONFIRMATION, null);
              pageContext.putDialogMessage(confirmMessage);
      }Then I extending the TestCO to XXTestCO and it is calling Update Message
        public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
          super.processFormRequest(pageContext, webBean);
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            if (pageContext.getParameter("Test") != null)
                OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
                OAException.CONFIRMATION, null);
                pageContext.putDialogMessage(confirmMessage);
        }got below Confirmation
    Confirmation
    Employee &EMP_NAME with the number &EMP_NUMBER has been created.
    Employee (&EMP_NAME) has been updated.
    Tried below approach also calling the message before super class
        public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
            OAApplicationModule am = pageContext.getApplicationModule(webBean);
            if (pageContext.getParameter("Test") != null)
                OAException confirmMessage = new OAException("AK", "FWK_TBX_T_EMP_UPDATE_CONFIRM",    null,
                OAException.CONFIRMATION, null);
                pageContext.putDialogMessage(confirmMessage);
          super.processFormRequest(pageContext, webBean);
        }got below Confirmation
    Confirmation
    Employee (&EMP_NAME) has been updated.
    Employee &EMP_NAME with the number &EMP_NUMBER has been created.
    My requirement is to print only the message which I have kept in Extended controller i.e. Update message
    Regards,
    chaitanya

  • Is there a way to show Custom message in Outlook Mail read Inspector Window same as When a File is opened in Protected View.

    Is there a way to show Custom message in Outlook Mail read Inspector Window same as When a File is opened in Protected View.
    If we open a Document from Untrusted location,the file is opened in Protected mode and a Red Message bar is shown below the ribbon for Excel,Word apps.
    Can we show this type of similar message bar with custom Message in Outlook or any other Office App.

    Are you displaying an MSG file? Keep in mind that Outlook creates a temporary copy in one of Outlook folders, so strictly speaking your are not looking at a file.
    Dmitry Streblechenko (MVP)
    http://www.dimastr.com/redemption
    Redemption - what the Outlook
    Object Model should have been
    Version 5.5 is now available!

  • Over riding a seeded message with a custom one.

    Hello everybody,
    Can you please tell me if it is possible to over ride the seeded error messages with our custom message. For example, while accessing UpdateSR screen on setting the Responded Date to a date before the creation of the case, we get an API programming error. Is there a way we can catch this exception and show the user a more understandable error. Please let me know...
    Thank you,
    Ramya

    Did you query if the message exists under Appl. Admin>Application>Messages form. If it exists, you can change the message text as per your requierments.
    Btb, What is the message text of the error?

  • Customized Message for No result On all Reports

    Hi all,
    I need to change the custom message that we get for No Result.Instead "the specified criteria dint result in any data"..i have put in my different message for all the reports.Any Idea how I get it done.???Any setting ???
    Regards

    Got it guys
    can be done by the below steps:
    The default messages displayed when a report returns no data are in:
    BI_HOME\web\msgdb\<language>\messages\viewme ssages.xml
    You can override these messages in by creating a custommessages.xml file in BI_HOME\web\mesdb\customMessages
    For example, the following changes the default 'No Results' message:
    <?xml version="1.0" encoding="utf-8"?>
    <WebMessageTables>
    <WebMessageTable system="Custom Messages">
    <!-- Change No Results message -->
    <WebMessage name="kmsgEVCNoRowsTitle"><HTML> ;No Data Found!</HTML></WebMessage>
    </WebMessageTable>
    </WebMessageTables>
    You will need to restart your Presentation services to make the changes effective.

  • Custom message is not getting displayed after raising do_not_save

    Hi all,
    In Order_save BADI, based some conditions, we were throwing custom messages.
    FYI., code used,
    CV_OWN_MESSAGE = 'X'.
    MESSAGE 'xxxxxxxxxxxxxx' TYPE 'W' Raising do_not_save.
    After Solman upgrade from 7.0 to 7.1, system is not displaying custom message and
    system throwing message like "The document could not be saved" only after execution of above message statement.
    How can I overwrite this system message.
    Any help would be highly appreciated.
    -Mahi

    Hi,
    Please check the below notes
    1922870 - Raising DO_NOT_SAVE event from ORDER_SAVE BADI cause dump
    1650635 - Work Center: problems when using BAdI ORDER_SAVE
    Rg,
    Karthik

  • Web-based BEx: How to display a customized message on the variable screen??

    Hi All,
    I'm now using the web-based BEx. Recently I want to display a customized message (e.g. the usage of the report) on the first page (i.e. the variable entry screen) of the query. Is it possible?
    Thanks.
    BR,
    M. Ng

    Hi marco,
          Check here. itmay help you.
    Custom Messages WAD
    Thanks,
    Vijay.

  • Javamail to send message with a custom messageclass to outook exchange

    Hello,
    I developed a microsoft outlook addin which added a custom message class to our outlook exchange. Now if a user sends a message of type "IPM.Note.OurCustomForm"; the recipient gets our custom addin when the message is received. My question is, is there any way to use JavaMail to send a message from our server, which is all in Java, which the Microsoft Office exchange will pick up as the "IPM.Note.OurCustomForm"; message class and display my addin.
    Some example code, or reference to similar problems would be appreciated, I have not programmed in Java since I graduated many a years ago :). Also, I was hoping to do this without using third party software (unless it is free), but I would none the less appreciate information about them too.
    Thanks much,

    I know nothing about Exchange, so all I can give you is a general approach to
    solving this problem. Remember that Exchange is full of Microsoft proprietary
    features that are not defined by any standard or specification.
    You need to learn how to construct a MIME format message that is equivalent
    to the new Exchange-proprietary message you created. One way to do that would
    be to use JavaMail (or some other non-Outlook email client) to read a message of
    that type from Exchange and examine the MIME structure of that message. That
    should give you enough information to construct a MIME message using JavaMail
    that has the same structure (MIME types, headers, etc.).
    The second part is constructing the actual content of the message. Since you
    created the new custom message class, maybe you already know how to do that.
    But if you used a tool to do that you might not understand the raw format of that
    message, in which case you may need to reverse engineer the format by reading
    sample MIME messages in that format.
    Does that help?

  • Display a custom message on click of a Top Level Navigation Object

    Hi Experts,
    when the user clicks on the top level navigation entry link(for any application), I would like a custom message to be displayed to the end-users which would be maintained in a text file in a KM folder.
    Currently, on click of the top level navigation link a  workset map is displayed. But now I would like to read the text file and display the message (if any) maintained in the text file.
    The message (if any) should be rendered before the workset map is displayed, or be rendered as an additional element on the same page as the workset map perhaps as an additional iView .
    It is essential that the message content should not be cached by the Portal (in other words, the deactivation of the system message should not require a cache flush to become visible to the user).
    The goal is to warn the users before they they access the applications of the workset map.
    Can someone please guide me on this???
    Regards,
    Anurag

    Hi,
    See some info regarding Portal Eventing:
    http://help.sap.com/saphelp_nwce72/helpdata/en/a5/8d1e72c20f4db2b9f577b47c1a47da/content.htm
    In the link above you can see that it's possible to raise an event and subscribe to it.
    Each time you navigate in the portal, the portal raises the UpdateTLN event so all you need it to subscribe to it in an iview that is located on the same page.
    Since the masthead iview is in the same window (above the TLN - see the following link) you can put your javascript function in it.
    http://help.sap.com/saphelp_nw04/helpdata/EN/b4/771158e4cb4bf6af9974380948db86/content.htm
    Regards,
    Omri

  • Adding custom message in exception list of F110 transaction without adding payment block

    Hi All,
    My requirement is to add custom message in exception list of F110 transaction based on certain fields validation without adding payment block .
    I tried using BTE 1820 where I can add my validation but am not able to add the custom message in exception list.
    Thanks,
    Mihika.

    Hi Raymond,
    Thanks for your reply.
    I did checked the document and tried giving the S and I message in my BTE with trace option checked on Additional log screen.
    But Success and information message doesn't showed in Exception List.
    If I set the Error message the Proposal gets cancelled and I can see my error message in log. (We don't want this option as in this option proposal is not getting created)
    If I set the Payment block I can see that logged in exception list. But we don't want to set the payment block but the message should appear in exception list.
    I added the message using simple message statement. Will you please advice if any other way to add the message other than using the MESSAFE statement.
    Thanks,
    Mihika.

Maybe you are looking for