Bulk messages upload and custom messages
Hi guys, I need a way to import a bulk of messages into Nokia Pc Suite, and for the suite to send them for me with a custom message
so lets say I have an excel sheet, in row A, I have 200 mobile numbers, Row B I have 200 Ref numbers, I would like to import that into the suite so it send a text to all 200 numbers, and it will insert the Ref number out of Row B with the message
so I have a custom message like this
Hi, Please call us on xxxxxxxxxxx please quote your order number [rowb] to get an extra 15% off!!
It would then send the texts for me to all 200 mobile numbers and the ref out of row B ( which I want to be whatever I put in
Does nokia support this?
Thanks
I too could do with the answer to this but judging by the date of 'stokie21's' post, there is no answer / it's not possible?
Similar Messages
-
Reg:Table for Custom Messages and custom Messaege Classes
Hi ,
My requirement is to find out all custom messages . so can any one tell in which tables all custom messages and custom message classes are stored .
Thanks & Regards,
Lakshmi.hi,
You can checkthese tables listed below,
T100 Messages
T100A Message IDs for T100
T100C Message Control by User
T100O Assignment of message to object
T100S Configurable system messages
T100SA Application Areas for Configurable Messages
T100T Table T100A text
T100U Last person to change messages
T100V Assignment of messages to tables/views
T100W Assign Messages to Workflow
T100X Error Messages: Supplements
T100ARBGB Application Area
But The main table for storing all the message classes and their numbers are stored in table
T100 -
Which is better for bulk message scenario in sap xi RFC or Proxy
which is better for bulk message scenario in ( RFC or Proxy ) ?
Edited by: prabhatxi on Aug 6, 2010 4:44 PMProxy will alwaays be better option in this case, as it is adapter less framework, and communication happens directly with XI central integration engine. So it is always fast communication and gives good performance.
But still you should consider other factors, you may consider using RFC as well, as sometime we go for RFC/IDOC as this are the standard interfaces already available rather than creating structure...
May be you can share more info on what type/volume data are you planning to send via XI?
Hope this cleart your doubt..
Divyesh -
Receiver determination for Split Message - Bulk message handling
All,
I have a scenario where MATMAS message is split to multiple receivers via multi mapping 1:n; the split is based on plant specific data, all works fine the mapping splits the message perfectly.
The problem I have is in configuring the receiver determiniation. I have put conditions based on plant specific data the message should be distributed to the appropriate receiver. At runtime the MATMAS message received is treated as a bulk message and it produces mutiple sub-documents however in my case if the MATMAS has 3 plant specific data the data is send to all the 3 receivers instead of sending just one message per plant to the appropriate receiver.
Its IDOC to File scenario on XI 3.0, SP20.
Receiver Determination:
/MATMAS05/IDOC/E1MARAM/E1MARCM/WERKS = 'xxxx' -> send to XXXX_receiver
/MATMAS05/IDOC/E1MARAM/E1MARCM/WERKS = 'yyyy' -> send to YYYY_receiver
Though the receiver determiniation splits the message by plant it could be that a material is maintained for both xxxx and yyyy plants and in this case both should receive the message but the contents would be different. The problem I have is both messages are delivered to both receivers.
I appreciate those who have taken the time to read the thread and thank you all in advance supporting with advices.
/ SajPlease find attached the source xml before transormation used for the xpath that I have indicated in my original message. From the below message E1MARCM-BESKZ differs on each plant and also has a corresponding warehouse view E1MLGNM where for example LHMG1 value differs for each warehouse.
<?xml version="1.0" encoding="UTF-8" ?>
- <MATMAS05>
- <IDOC BEGIN="1">
- <E1MARAM SEGMENT="1">
<MSGFN>005</MSGFN>
<MATNR>000000000001002201</MATNR>
<MTART>ZFGS</MTART>
<MATKL>1111003</MATKL>
- <E1MAKTM SEGMENT="1">
<MSGFN>005</MSGFN>
<SPRAS>E</SPRAS>
<MAKTX>AA Ni-MH Rechargeable Batteries</MAKTX>
</E1MAKTM>
- <E1MARCM SEGMENT="1">
<WERKS>4911</WERKS>
<BESKZ>F</BESKZ>
</E1MARCM>
- <E1MARCM SEGMENT="1">
<WERKS>4912</WERKS>
<BESKZ>X</BESKZ>
</E1MARCM>
- <E1MARCM SEGMENT="1">
<WERKS>5020</WERKS>
<BESKZ>E</BESKZ>
</E1MARCM>
- <E1MARMM SEGMENT="1">
<MEINH>CS</MEINH>
</E1MARMM>
- <E1MLGNM SEGMENT="1">
<LGNUM>020</LGNUM>
<LHMG1>2020.000</LHMG1>
<LETY1>E2</LETY1>
</E1MLGNM>
- <E1MLGNM SEGMENT="1">
<LGNUM>023</LGNUM>
<LHMG1>2323.000</LHMG1>
<LETY1>E2</LETY1>
</E1MLGNM>
- <E1MLGNM SEGMENT="1">
<LGNUM>024</LGNUM>
<LHMG1>2424.000</LHMG1>
<LETY1>E2</LETY1>
</E1MLGNM>
- <E1MVKEM SEGMENT="1">
<VKORG>4900</VKORG>
<PRAT1>X</PRAT1>
</E1MVKEM>
- <E1MVKEM SEGMENT="1">
<VKORG>5000</VKORG>
<PRAT1>/</PRAT1>
</E1MVKEM>
</E1MARAM>
</IDOC>
</MATMAS05>
so in this example above:
Receiver 4911 (WERKS) should receive:
F + 2020 (BESKZ + LHMG1)
Receiver 4912 (WERKS) should receive:
F + 2323 (BESKZ + LHMG1)
Receiver 5020 (WERKS) should receive:
F + 2424 (BESKZ + LHMG1)
The problem is all these 3 messages are delivered to all the 3 plants thus making it 9 messages delivered in total as against 3.
/ Saj -
Hi Expert,
I need to send around 200,000 records as one message from R3 side to 3rd party through PI. I am using proxy to FTP scenario and use SOAP adapter type, XI 3.0 message protocol (use AAE) for proxy. Since the message size is too big, I got an error when I send out "HTTP response contains status code 400 with the description Bad Request". Can anybody tell me how to handle this situation? I see Soap adapter has an option "XI Bulk Message Handling - split XI Bulk Messages". Can anybody tell me if this can solve my problem? And how to use it?
Thanks a lot!
Charles>Can anybody tell me how to handle this situation? I see Soap adapter has an option "XI Bulk Message Handling - split XI Bulk >Messages". Can anybody tell me if this can solve my problem? And how to use it?
You might want to use Message Packaging. This might be helpful for perfromance improvement and throughput will be considerably increased.
Have you seen this [link|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10b54994-f569-2a10-ad8f-cf5c68a9447c?QuickLink=index&overridelayout=true] ? -
Hi,
I have SOAP to Proxy scenario. I am expecting bulk messages (approx 100) from the third party at a time.
They sent around 30 requests at one go and XI was able to process on 15 and for rest it has throw exception.
Is there any way we can handle bulk messages?
ThanksHi ,
You can go for message packaging in PI .
Here is this article which might help you out :http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/10b54994-f569-2a10-ad8f-cf5c68a9447c
Thanks
Ravi -
Uploading the GL, Vendor and Customer balances
What is the procedure to upload the Opening balances of GLs, Vendor and Customer balances using T Code F-02.
The Ope item balances may be taken adn clean the data.
For AP some clients curt the check and release it later .
If that is the case no need to load AP items,Agian this is depend on the business arrangemnets.
The data may be loaded FB60, FB70 transactions.The transaction may be recorder and use LSMW
Create a GL account ( data conversion acccount)
Customer:
Dr Customer
Cr Data convertion accounmt
Vendor:
Dr Convertion Account
Cr Vendor
The data collected in Xl may be converted as Tab delimited Txt file and may be used for LSMW.
Hope this is clear. Allot the points if you get some resolution for yr doubt.
Chitras -
Uploading extractor setup file in mdmgx in upload ports and customizing tab
hi
i am searching for file called MDMGX_5.5_<OBJECT TYPE.TXT> , which needs to be uploaded in mdmgx tcode under "upload ports and customizing tables " in servicemarket place , can any bdy directions where i can download that .txt file
thanks in advanceHi Akhil,
Please refer the link as follows on Service Market Place:
https://websmp210.sap-ag.de/swdc
then on the left hand side, click on
Search for all Categories, in search term write "MDMBC55005P_2-10003437.ZIP" and search method = "All Terms" then press enter.
then download this Business Content , in Zip folder you will get
55510_Article.zip, 55510_Customer.zip etc under each these like 55510_Article.zip you will get MDMGX_55510_Article.txt
i checked in business content all these MDMGX_XXX. txt files are available there.
Hope it helps you,
Mandeep Saini -
How do I upload and attach the file to Service Request
[This thread was migrated from the On Demand Developer Forum in the old Siebel Community]
drangineni
New Contributor
Hi,
I am trying to upload a file and add it to a Service object as an
attachement. I greatly appreciate if you could provide any code or
sample...
Thanks.
Daya
Product: CRM OnDemand
10-21-2006 10:58 AM
Re: How do I upload and attach the file to Service Request...
BigSlick
Valued Contributor
On Demand doesn't support adding attachments via web services. One
solution I've seen is depending on the scenario is to create a web link
field on an object that's based on a custom text field. Your web service
can populate that custom field and the web link can generate a dynamic
link to the file in On Demand's UI. However, this depends on where the
attachment is located and if the user needs some sort of firewall access.
Hope this helps
-BigSlick
10-23-2006 11:43 AM
==============================================================================
Click on the board or message subject at the top to return.Yes this still holds ture.
Bardo -
Optimization for bulk data upload
Hi everyone!
I've got the following issue:
I have to do a bulk data upload using JMS deploy in a glassfish 2.1, to process and validate data in a Oracle 10g DB System before it is insert.
I have my web interface that loads a file and then delegates the process to a Stateless Session Bean which read a N number of lines and after that send a message to a JMS Queue. The JMS has to parse the each line, validate them with the data already in the DB, and finally persist the new data.
This process is high process consuming, and I need to improve the performance time. I tried to change glassfish default JMS and JDBC pool size, but I have no a huge difference.
Do you have any advice that could help me?
Thanks in advance!Hi! thank you for you answer!
High process consuming is in the MDB
I'm grouping each N number of read lines in the EJB and then send the message to the JMS. The MDB process the persists each line as info in different related tables.
Thanks again! -
File Upload and Download in Oracle iAS PL/SQL Gateway
i'm using the example 113471.1 to "File Upload and Download in
Oracle iAS PL/SQL Gateway"
when i press the submit button after i select a file to upload
i get the next message in the browser "No se puede mostrar la
pagina" HTTP 404 file not found.
I think the problem is in ctnsample.upload_form in the line
htp.formOpen(curl => 'cntsample.upload', cmethod => 'POST',
cenctype => 'multipart/form-data');
The ctnsample.remove work fine.
Could you,help me...There is a document in the Oracle 9iAS 1.0.2.2 Library titled "Using the PL-SQL Gateway" Part Number A90099-01.pdf that explains file upload and download through modplsql. In particular there is a section there titled "Direct BLOB Download" which explains how one can easily download a blob utilising the wpg_docload package.
I am still concerned that there exist duplicate copies of my blob content. One copy in the wwdoc_document$ table, and one in my custom table.
Dmitry/Oracle can you confirm this? -
Upload and Download Files in an Application
hi,
I'm use Application Express 2.1.0.00.39 and the procedure " How to Upload and Download Files in an Application" :
http://download-west.oracle.com/docs/html/B16376_01/up_dn_files.htm#sthref177
I do not find the following tables or view:
HTMLDB_APPLICATION_FILES or wwv_flow_file_objects$.
which it is my error?
thanks.
LuigiThe documentation was for version 2.2. I could not find a 2.0 version of this howto:
http://download-west.oracle.com/docs/cd/B31036_01/doc/appdev.22/b28839/up_dn_files.htm#CIHCFCHF
However, I did find the correct name of the view for my version, HTMLDB_APPLICATION_FILES
After following the instructions in the above-mentioned "how to" (uploading and downloading files), I am a getting a html 403 error (You are not authorized to view this page) when I try to download from my custom table using the procedure specified in the howto.
I've granted execute on the procedure to public only (as specified in the doco).
err nvm. This has already been answered,
http://download-west.oracle.com/docs/cd/B25329_01/doc/appdev.102/b25309/adm_wrkspc.htm#BEJCGJFJ.
Message was edited by:
user507810 -
Uploading and downloading files from a web app (Urgent!!)
Hi everyone:
I'm developing an application in PL/SQL to upload and download files from an HTML webpage. I congured the document table and the parameters necessary in the DAD of my application.
when I upload the file using my webpage that file info is automatically uploaded to the doc table. This is as far as I have gotten.
I need to do the following:
- Place the uploaded file into a column in another table in my database as part of a text message (think of it as an email message), and delete the file from the doc table (as this is thought to be a temp table that holds the file when uploaded from my webpage)
- Retreive the file so that it can be downloaded from another web page.
The file can be a PDF, WORD DOC, etc...
I now that I can do this with InterMedia but I haven't figured out how :(
Can anyone please point me to an example or some documentation that can guide me through the process.
DB VERSION: 8.1.7
IAS VERSION: 1.0.2.2
Thanks,
Carlos AbarcaThe idea was for you to look at the code and get an idea of how to access the BLOB in the document table. IF you look at the procedure
insert_new_photo( new_description IN VARCHAR2,
new_location IN VARCHAR,
new_photo IN VARCHAR2 )
It shows how to access the blob that is stored in the document table. You can then copy this blob to your own table using the DBMS_LOB package.
Hope this helps,
Larry -
How to set buildID.xml and custom.properties in SDK
Hello,
I just completed a new build deployment of SAP ME5.2, because after I deployed the new version, I don't think I have set a
correct version number.Can you someone give me a sample how to set the buildID.xml and custom.properties? I am a new on the SAP ME5.2
The Base version is ME_Base_5.2.5.16.5_netweaver-71_Update.zip and
MEClient_Base_5.2.5.16.5_netweaver-71_Update.zip. the HB customzation
version is ME_xxxxxx_2.0.0.0.x_netweaver-71.
Within the sap note 1484551, you mentioned we need change the
SDKInstallDir/build/buildID.xml file, here is the context of the file:
buildID.xml -
<?xml version="1.0" encoding="UTF-8"?>
<buildID xmlns:xs="http://www.w3.org/2001/XMLSchema">
<customer>XXXXXX</customer>
<revision>1.0.0.0</revision>
<build>1</build>
</buildID>
buildID.xml -
1. how can we change the revision and build?
There is another file BuildToolDir/build/script/custom.properties, here
is the file context:
custom.properties----
This file contains build properties used to configure the build
system.
The name of the software vendor implementing the customizations.
vendor.name=xxxxxxxxx
Vendor build identifier. This value is used to uniquely identify
customizations built by a particular vendor for a particular customer
and base
application version.
This is also used in path locations and in naming certain build
artifacts, like the custom EJB module and the utility classes archive.
vendor.id=xxxxxxxxx
The installation of the J2EE engine installed in the development
environment.
ex. C:/usr/sap/CE1\J00
j2ee.instance.dir=J2EEInstanceDir
The web context path used to access the main web application. This
is used by the build to set the
context-root value in application.xml after an update has been
imported.
web.context.path=
The web context path used to access the production XML interface web
application. This is used by the build to set the
context-root value in application.xml after an update has been
imported.
xml.context.path=
The web context path to access resources from the web extension
application, like images and work instruction HTML files.
web-ext.context.path=web-ext
The target database vendor. Valid values are 'oracle' or 'sqlserver'.db.vendor=ORACLE
The JDBC driver configured for the application server.
db.drivername=VMJDBC
JDBC connection propertes for the WIP (Work In Process) database.
This is the primary application database.
db.wip.driverclassname=
db.wip.driver.url=
db.wip.host=
db.wip.port=
db.wip.sid=
db.wip.user=
db.wip.password=
JDBC connection propertes for the ODS (Open Data Store) database.
This is the offline reporting and archiving database.
db.ods.driverclassname=
db.ods.driver.url=
db.ods.host=
db.ods.port=
db.ods.sid=
db.ods.user=
db.ods.password=
Flag indicating whether to add DPMO NC codes to NC idat files when a
new update is imported. This value is initially
set by the installer according the the user selection.
dpmo.nc.codes=
The default locale used by the production system. The default locale
is the locale used to display locale
specific text and messages when the requested locale is not
available. This property does not need to
be set if the default locale is english.
default.locale=en
Used when running the build from Eclipse to locate the java compiler
used by the WebLogic EJB compiler.
jdk.home=C:/Program Files/Java/jdk1.5.0_20
Compiler debug mode. If set to 'true', debug symbols will be
compiled into the byte code.
compile.debug=true
Keystore alias
security.alias=xxxxx
Keystore password
security.storepass=ChangeIt
Key password
security.keypass=ChangeIt
Keystore type (jks=default,jceks,pkcs12)
security.storetype=jks
Optional source control build identifier that is to be displayed with
standard version information.
scs.build.ID=
Optional extended version information to be displayed with standard
version information.
ext.info=
custom.properties----
2. How can we change this here?
Regards,
Leon Lu
Edited by: Leon Lu on Aug 4, 2011 11:14 AM
Edited by: Leon Lu on Aug 4, 2011 11:21 AMHi,
I created one request with logo in the header an page in the footer etc. and called StyleSheet. After you can import this formats by each request.
You can do this in compound layout.
Regards,
Stefan -
I cannot see my picture stream on iPad with IOS 8.1.3. The pictures from iPad are uploaded and visible on picture stream on iPhone 4, IOS 7. Is this a bug with IOS 8.1.3?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
iOS: Troubleshooting Messages
iOS: Troubleshooting FaceTime
- Sign out and then sign back into Messages and FT. Note you will lose all messages presently on the iPod
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.
Maybe you are looking for
-
How do i transfer to a new icloud account
I am having to create a new iCloud account, how do i do this and not lose all of my information. When i try deleting existing account it tells me all information will be lost. Thanks for the help.
-
My iPod synced automatically and now I can't play songs on iTunes.
I used to play my songs from my iPod all the time on iTunes. One day, I connected my iPod to my computer to charge it up and it started to sync automatically for no reason and now I can't seem to 'rewind' this and go back to the way things were. What
-
Calling one program from another and gettting values back
Hello All, I am calling subroutine program X from a payroll function. I am not able to get internal table back in my payroll program. This subroutine in program X is being used by some other reports in folLowing way and successfully returns values.F
-
Problems w Adobe Content Viewer on my iPad
Hello Adobe Content Viewer on my iPad is not recognizing my ID and pass, i sign in online but the app is not working. I already deleted it and re-downloaded it and nothing. Please help, thank you
-
State of external/internal BT wiring to phone sock...
Hi, I have been in my crrent house for nearly a year now, Broadband is slow (max 1.5Mg), I have been advised to examine the external wiring from the telephone pole to the house and thereafter to the socket. The wiring does not look in good condition,