Trend formula calculation in Calc

In the MS Excel I was using before it was easy to create a simple scattered chart, and then to select a trend option in order to draw a trendline of a given type along with its formula. I really need this functionality in calc, but do not know how-to.
Thank you,
Mike

Hello Sachin,
Please check the possibilities of the IMG activity 'Specifiy Events'.
Example: event EVT_EXPL06 (Explosion: List of Ingredients (Specifications)) for the Ingredients view and component Z_PACK for packaging. With the indicator Explosion and Calculations it is possible to control the usage.
Please have a look into the documation of the IMG activity.
Best regards,
Roland

Similar Messages

Formula calculation not work, when one inspection characteristic was set by formula

In the inspection plan, set 0040 charac. "calc. charac." in control indicators, and the formula is "15.86/C0020*100".
when the inspection lot was created, the 0040 charac. could be edit, and the formula title "formula calculation not by SAP interpreter".
However by the same basic data in QAS system，the formula title is "formula calculation by SAP interpreter", and the charac. couldnot be edit, only be claculated by the system.
Anybody know why this error occurred?
this is the question in PRD system,
this is the right situation in QAS system

Hi Pei,
Please can you check the characteristic value using C00020 (C0 then 2 zeros before 20. Total 3 zeros before 20) instead of C0020 and check if this is working.
You can take some clues form the below thread -
http://scn.sap.com/thread/1672782
Thanks to all previous contributors of the attached thread!!
Thanks,
Arijit

Formula Calculation in Recipe Management

Hello All,
I am using a Z_PACK Packaging spec (of category Packaging) as a component inside a Formula. The spec is used in BOM in 'Grams' even though it is packaging and not in EA. I dont want to include this packaging spec in any of the following formula calculations related to Ingredients (ii) Quantity (iii) Composition but only want to make it relevant for (iv)Costing View.
How do I achieve this. What configuration I need to do to make it work.
Thanks,
Sachin

Hello Sachin,
Please check the possibilities of the IMG activity 'Specifiy Events'.
Example: event EVT_EXPL06 (Explosion: List of Ingredients (Specifications)) for the Ingredients view and component Z_PACK for packaging. With the indicator Explosion and Calculations it is possible to control the usage.
Please have a look into the documation of the IMG activity.
Best regards,
Roland

What is available in essbase to show analysts formula calculations for accounts/ratios?

Hello all,
What is available in Essbase to show analysts formula calculations for accounts/ratios?
Access to the EAS console is not an option, so we are looking for something else.
Also what is best practice for use of a “Data Dictionary” for Essbase reports/database.
Thanks,

See this discussion.
https://forums.oracle.com/message/11201356#11201356

FRM-40735: Formula-CALCULATION trigger

Hi,
I'm getting this error in my form....
FRM-40735: Formula-CALCULATION trigger raised unhandled exception
How can I find where the issue is? Can you please suggest some ideas?

I have the following 6 formula columns in my form....
1. PCT_COND_COMP_FORMULA -->
(:CLT.DUCT_LENGTH_ACTUAL / :CLT.TRENCH_FT_EST) * 1002. ACTUAL_COST_FORMULA -->
nvl(:clt.unit_cost,0) + nvl(:clt.te_cost,0) + nvl(:clt.paving_cost,0)3. CSOA_AVG_COST_TRENCH_FT_AVG -->
:CR_ACCOUNTS.CONDUIT_COST_TO_DATE_SUM / :CR_ACCOUNTS.CONDUITS_COUNT4. COST_TO_ACCRUE_FORMULA -->
((:cr_accounts.completed * :cr_accounts.unit_price) * (nvl(:clt.residue,100)/100))5. CWE_FORMULA -->
:cr_accounts.accrual + ((:cr_accounts.est_quantity - :cr_accounts.completed) * (:cr_accounts.unit_price))6. COST -->
:CR_ACCOUNTS_DETAIL.UNIT_PRICE * :CR_ACCOUNTS_DETAIL.QUANTITY1. POST-TEXT-ITEM trigger on ESTIMATE_CUSTOM item has....
BEGIN
if get_block_property('cr_accounts', update_allowed) ='TRUE' then
     IF NVL(:CR_ACCOUNTS.EST_QUANT_CUSTOM,0) <> 0 THEN
          :CR_ACCOUNTS.UNIT_PRICE_CUSTOM := (:CR_ACCOUNTS.ESTIMATE_CUSTOM / :CR_ACCOUNTS.EST_QUANT_CUSTOM);
          update_nonprano;
     END IF;
end if;
END;2. Procedure update_nonprano ...........
PROCEDURE update_nonprano IS
BEGIN
:CR_ACCOUNTS.COMPLETED := (:CR_ACCOUNTS.PCT_COMPLETE_CUSTOM/100) * :CR_ACCOUNTS.EST_QUANTITY;
-- sets cost_to_date
:cr_accounts.cost_to_date := ((:cr_accounts.estimate_custom) * (:cr_accounts.pct_complete/100)) ;
-- sets cost_to_accrue
:cr_accounts.cost_to_accrue := (:cr_accounts.cost_to_date) * (nvl(:CLT.residue, 100)/100);
-- sets accrual
:cr_accounts.accrual := (:cr_accounts.cost_to_accrue) + NVL(:cr_accounts.adjustment, 0);
-- sets CWE per ACCOUNT
:CR_ACCOUNTS.CWE := :CR_ACCOUNTS.CWE_FORMULA;
-- sets CWE
:CLT.CWE := :CR_ACCOUNTS.CWE_SUM;
IF :CLT.PCT_COMP = 100 AND :CLT.CWE > :CLT.ESTIMATE THEN
     WARNING_ALERT('The Layout Complete is set to 100% but the CWE is larger than the Estimate. This job is incomplete and over budget. Please modify % Layout Complete.');
END IF;
END;Now in my form when I enter EST_QUANT_CUSTOM= 12, ESTIMATE_CUSTOM=13, PCT_COMPLETE_CUSTOM=15... I get error.
But when I put EST_QUANT_CUSTOM= 12, ESTIMATE_CUSTOM=12, PCT_COMPLETE_CUSTOM=12... I don't get error.

Formula calculation doubt ?!

Hello ,
Can we make a database item in a form store a formula calculation ..?
:ITEM_QTY * :ITEM_PRICEor we have 2 make it displayed...!
Regards,
Abdetu...

An item in a Data Block does not have to be displayed/visible in your form in order to stored/hold a formula calculation value. Create a test form which displays the calculation field initially so you know it is working correctly. Then set the "Canvas" property to NULL for the item and add a button that displays the value of the non-displayed calculated item in a Message(). When you click the button, you will see the value displayed! ;-)
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.
Edited by: CraigB on Oct 29, 2010 8:48 AM

Formula calculation showing wrong data.

Hi All,
I have an issue in the formula calculation at BEx.
I have a formula2 whose values is formula1/RKF * Constant.
formula2=formula1/RKF * Constant.
Formula1    formual2        RKF             constant
73.00          25.63            80.00         28
The error is the actual value of formula2 to be a
     formula2 = 73.00/80.00 * 28
                  =25.33
But in report result it is displaying as 25.63.
for some different values it is showing very different result.
can any one tell me how to round of this value to avoid confusion
regards,
santosh.

Santosh,
rounding off the result will not solve your problem. In your scenario, the actual result is 25.33 and rounding it off will be 25.
Now BI is showing you a value of 25.63 and rounding it off will give you 26. This will still give you the wrong answer.
You can go to the properties for the formula and in the display properties, you can change it 0 decimal places instead of 2. This is just a interim solution.
Regards,
Sameer

Summary field of subreport used in main report formula calculation

I have a summary field in a subreport that I want to use in a calculation of a percentage using a second summary field in the main report as the denominator. How do I do this in a new formula?

Thank You Ian Waterman,...
Couple of questions:
Where you say "... in subreport
@ eval
whileprinting records;
shared number x:=your summary
Am I correct that this is to be a new formula created in the subreport design?
What should I put for the "x" in the formula?
Should the "your summary" be: "DistinctCount of Activated_Survey.Seq.Incident" which I have showing in the Report Footer of the subreport?
Where in the subreport should I place the formula? Can it be hidden?
Where you say "In subreport header..."
@reset
whileprintingrecords;
shared number x:=0
Am I correct that this is to be a new formula created in the subreport design?
What should I put for the "x" in the formula?
Where in the subreport should I place the formula? Can it also be hidden?
Where you say "In the main report in section after subreport..."
I have the subreport sitting up in the main Report Header as I only want the subreport summary field showing.
In the subreport, I have the Report Header and Details section hidden.
@calc
whileprintingrecords;
(shared number x / main report summary) * 100
Am I correct that this is to be a new formula in the main report?
However, what I need to have happen is that the main report summary field of: "Count of Answered_Survey.Seq.Incident" needs to be divided by the subreport summary field of "DistinctCount of Activated_Survey.Seq.Incident" * 100.
What do I modify in the formula?
Thanks.

Seasonal + Trend forecast calculation

all,
We are using Consumption based planning with MRP type VV and Forecast model - X and material master maintained as below.
For testing purpose, I have maintained past consumption for last 6 month as below screen shots.
When I execute forecast from Material master tab, I got basic values, MAD, safety stock & error total as below..
How System is calculating above values?. I have gone through the formula but didn't understood and also gone through below link but didn't get sna idea.
http://http://scn.sap.com/community/erp/post!input.jspa?containerType=14&container=2110&content Type
And How System calculate below corrected forecast values?
Please help to understand calculation.

Hello Mr,
Please check below link for seasonal trend calculation formula, Insert values and try to cross check result.
I hope this link helpful to you.
Forecast with Seasonal Trend Model - Forecasting - SAP Library
https://help.sap.com/saphelp_scm70/helpdata/en/46/a605b9d57052b8e10000000a155369/content.htm
Thanks & Regards
Umesh Mali

Formula calculation in a variable

hi sir
i have a table name is calculation and it is below as
CAL_ID CARCHAR2(20),
CAL_FORMULA(100);
cal_id cal_formula
CL0001 AMOUNT+(TAX*12%)
CL0002 AMOUNT+(VAT*6%)
AMOUNT, TAX, VAT and SAMOUNT are variable on my form
i m using form 6i and oracle 8i
i m want to calculate SAMOUNT FROM cal_formula MEAN
SAMOUNT := AMOUNT+(TAX*12%) whihc is same as
SAMOUNT := eval(cal_formula)
some time its like formula correspond to CL0001 and some time is CL0002.
they can contain also some other calculation as well

Ok this is the program unit (function) used in the Forms module:
FUNCTION calculate_formula ( PC$Formula IN Varchar2 )
RETURN Number
Is
v_curs       exec_sql.curstype;
--v_formula   Varchar2(200) := '1+23-5';
v_result     number;
v_number     number;
LC$Formula   VARCHAR2(1000) := PC$FORMULA ;
LC$Sub       VARCHAR2(300);
LC$Field     VARCHAR2(61);
LN$Pos       PLS_INTEGER ;
LN$i         PLS_INTEGER ;
LB$Ok        BOOLEAN := TRUE ;
LN$Cnt       PLS_INTEGER := 0 ;
Begin
-- any place-holders to substitute ? --
WHILE LB$Ok LOOP
    LN$Pos := INSTR( LC$Formula, ':' ) ;
       IF LN$Pos = 0 THEN
         LB$Ok := FALSE ;
         EXIT ;
       END IF ;
       LN$i := LN$Pos ;
       LC$Sub := '' ;
       LOOP
       IF SUBSTR( LC$Formula, LN$i, 1 ) = ' ' THEN
             LC$Formula := REPLACE( LC$Formula, LC$Sub, Name_In(LC$Sub)) ;
             LC$Sub := '' ;
             EXIT ;
       END IF ;
       LC$Sub := LC$Sub || SUBSTR( LC$Formula, LN$i, 1 ) ;
       LN$I := LN$I + 1 ;
       LN$Cnt := LN$Cnt + 1 ;
       EXIT WHEN LN$I > LENGTH(LC$Formula) ;
       END LOOP ;
    IF LC$Sub IS NOT NULL THEN
      LC$Formula := REPLACE( LC$Formula, LC$Sub, Name_In(LC$Sub)) ;
       END IF ;
END LOOP;
-- evaluate the operation --
v_curs := Exec_SQL.Open_cursor;
Exec_sql.Parse(v_curs, 'Begin select ' || LC$Formula ||' into :1 from dual ;end;');
Exec_sql.Bind_Variable(v_curs,'1',v_number);
v_result := Exec_SQL.Execute(v_curs);
Exec_SQL.Variable_value(v_curs,'1',v_number);
Return v_number ;
Exception when others then
    Declare code number        := SQLcode;
            errm Varchar2(200) := SQLerrm;
    Begin
      If code = -306500 then
         code := Exec_Sql.Last_Error_Code;
         errm := Exec_SQL.Last_Error_Mesg;
      End if;
      Message('Error '||code||': '||errm);
      Raise form_trigger_failure;
    End;
End;T1 and T2 are 2 text items that type is number.
Francois

Bex - Formula Calculation

HI ,
I'm trying to display a column that show the 'SHARE' calculation in BEX query.
Share = (Value by Order / Total Value by Order Group )*100
<order group>      <order>     <value>     <Share>
ABC                         31000001     $200     28.57%
XYZ                         31000005     $400     100%
ABC                         31000007     $500     71.42%
Note : In the above, order group ABC , Order 31000001, Share = (200/700)*100
I'm unable to sum up by order group in query.
Is there any way we can utilize CKF (aggregation) or anything other method that can be used to populate this column.
Appreciate help from anyone who's familiar with this.
Thank you.
Regards,
Maili
Edited by: Maili06 on Mar 31, 2011 6:07 AM

HI Divyesh,
I'm using an alternative approach. This manage to solve my issue.
I'm using SUMCT function in BEX.
I create :
Formula 1 --> formula sumct(Value)
Formula 2 --> (Value / formula 1)*100
Formula 2 provides the share percentage for me.
I placed the Order group as the first column.
You may find abt sumct here :
http://help.sap.com/saphelp_nw04/helpdata/en/03/17f13a2f160f28e10000000a114084/content.htm
http://www.scribd.com/doc/46732230/SAP-BI-Reporting
hope it helps you to solve your prob.
Regards,
Maili
Edited by: Maili06 on Apr 1, 2011 11:52 AM

Issue with the formula calculation in 2 structures

Hello all,
For a query we have defined 2 structures,One in Rows and another one in Columns.
In Rows, we have created local formula's . And in columns also we have few local formlas in which we are tyring to calculate Variable values, that is difference between two kf's.
When the local formula is having more than one mathematical formula, it is not calculating Variable values, instead it is applying the same formula defined at Row level.
Ex: consider we have a KF X , which is a local formula defined in Rows
as below
Y is having value of 200
Z is 150
X= nodim(Y/Z *100)( Y and Z are KF's)
and in Columns Var==Actual value- Planned Value which should be equal to 90 (suppose actual is 200 and Planned is 110)
As per the above formula it should display 90 , instead of it its displaying ( 200/150 *100)..This is happening only when a Formula is having more that one mathematical caluclation...
As a work around I have defined ithe varaible values in Cell definition.
I would like to know can we use more than one mathematical operation, when we have two structures.
Thanks

HI,
This is due to Cell Contaradction . For CKF or new formula change properties in advanced tab as use result of this formula like below :
Try once .
Thanks.

Weird "Trend" metric calculation in Tabular KPI

Hi Experts ,
We have a tabular model in which we started designing the KPI to show Actual metric value vs its Target comparison by an Status indicator to know how good the metric has performed. In the KPI calculation window of the tabular model , there are only
place holders to calculate Value , Status & Target but not for “Trend” . Even though we didn’t code anything specific for “Trend” calculation , Under the newly created KPI we see the “Trend” along with Value , Goal & Status . But the “Trend”
is behaving weirdly in the Tabular KPI, The trend indicator is being showed for every dimension attribute that is sliced with the KPI irrespective of whether it has Metric value or not. I searched many websites to understand how this “Trend” is
being calculated in a KPI , but none of them are able to throw some light on the “Trend” calculation. In this kind of scenario please suggest me a way to circumvent this issue.
How to hide the “Trend” indicator from the newly created KPI, as this I think we cannot define “Trend” calculation in tabular as in that of Multidimensional Cubes
Understand the reason why “Trend” is displayed in tabular models
Below is snapshot of our KPI when interfaced through Excel.
Can you guys please help on how to hide the “Trend” expression from tabular models. So that our users wouldn’t be confused by using unrequired metric in KPI.
Rajesh Nedunuri.

Hi NedunuriRajesh,
According to your description, since you haven't specified any expression for Trend calculation, you want to hide the Trend option. Right?
In Analysis Services Tabular, Value, Goal Status and Trend in KPI are based on the Base Value, Target Value and Status Threshold. No matter you specify a Trend Expression or not, the Trend box is always displayed in the KPI pane. And it will do the
calculation automatically. This is feature by design. There's no way to edit or modify it. So your requirement can't be achieved currently.
I recommend you
a feature request at https://connect.microsoft.com/SQLServer so
that we can try to modify and
expand the product features based on your needs.
Best Regards,
Simon Hou
TechNet Community Support

Forecasting formula calculation in Automstic reorder point plannig

Dear Experts,
We are using R/3 ECC 6.0 we want to implement Automatic reorder point planning. for this basic settings i know.
suppose i taken 430,590,350,490,495,520 value for hitsory from Jan 2009 as conusmtion value for testing purpose.
My history periods is 6 & forecast period is 6,Initialization periods is 6. Alpha factor is 0.1 & Beta is 0.2, Tracking limit is 4.00 & Forecast model is T. can any one tell me how it is calaculted basic Value, MAD, Trend Value are calculated for trend or seasonal model.
Thanks in advance, awating for ur valuable reply.
Best Regards,
Dev

HI
AS YOU SAID , THE INITIATION PERIOD WILL NOT BE SAME FOR ALL THE FORCASTING METHODS. PLS
GO AND USE THE APO LIBRARY.

Formula calculation

Hello Experts,
      In my report I have balance sheet hierarchy.
I have as follows:
Balance Sheet       0
   Total assets      10
   Total Liability -10
But I need the report as follows:
                         Variance
Balance sheet      24      100%
Total Assets     16     66.6%
Total Liability   8     33.3%
Since its a hierarchy how do I do this variance calculation.
Thanks in advance.
Sree

Hi Sree,
You can try this:
Create your Balanse Sheet as a text node, put Total assets and total liabilities as subnodes of this node.
In Bex add a calculated KF (formula), where use one of the percentage functions.
Best regards,
Eugene

Trend formula calculation in Calc

Similar Messages

Maybe you are looking for