Tried many things and my iTunes still will not open

I recently did a full restore on my computer, and when I tried to open up my itunes through the shortcut and going through "start, all programs, itunes" I received an error message saying "iTunes has encountered a problem and needs to close. We are sorry for the inconvience"
Now I have tried everything possible that i could think of to fix this problem software listed on the online manual, and the advice with the forum.
-I have done a partial restore on the computer,
-I have uninstalled and reinstalled the software about 15-20 times, but when I believe that iTunes is completely removed from the system....it seems to still be there
-I have turned off my virus protection.
-I have deleted files one by one and reinstalled the system.
-I switched USB ports, "my computer" recognizes that I have my ipod connected but not the iTunes, and also it pulls up "autoplay" and when i looked into the file for music it saying that I have a few songs in system but it doesn't show up on the actually ipod
-I even downloaded the update off the internet and it STILL will not even open the program. Not to mention that when i plugged my ipod into the system it erased all of my music and contact files.
I'm so lost and confused and i don't know what else to do...please help me. Thanks
Sony Vaio Digital Studio PC #PCV-RX560   Windows XP  
Sony Vaio Digital Studio PC #PCV-RX560   Windows XP  
Sony Vaio Digital Studio PC #PCV-RX560   Windows XP  
Sony Vaio Digital Studio PC #PCV-RX560   Windows XP  

hi Meika!
Itunes has encountered a problem and needs to close
the first thing that i check for when people report getting that message when they try to launch their itunes is a broken QuickTime.
try to open your QuickTime. does it launch properly, or do you get an error message?
if you get an error message, the first thing we'll try is a careful standalone QT 7.0.4 reinstall.
download and save a copy of the QT 7.0.4 standalone installer to your hard drive. (we'll run the install from there rather than online.) switch off antivirus and antispyware applications prior to the install.
Quicktime 7.0.4 Standalone Installer
if that install goes through okay, does your itunes launch properly again?
(if you get an error message on the QT standalone reinstall, let us know what it says. include error message numbers if you're getting any.)
love, b

Similar Messages

  • Even after redownloading iTunes and Quicktime, iTunes still will not open.

    I was on this board a while ago with the complaint that my iTunes would not open, and I recieved no real help about it. I got replies, but nothing suggested helped at all. I looked over the boards for others with the same problem and found a LOT. Some people responded to their topics with advice, and I tried all of the advice I could find, but nothing would work. So now its a few weeks later and I've uninstalled everything, reinstalled it, and tried to open iTunes again.
    This time, instead of just not showing any signs that I'd clicked any iTunes icons at all, it flashes up for maybe less than a second before closing again.
    Is there any NEW advice? ): This is pretty distressing. I paid for my iPod so that I could use it, not just stare at it on my desk.

    hi Katherine!
    This time, instead of just not showing any signs that I'd clicked any iTunes icons at all, it flashes up for maybe less than a second before closing again.
    yuck. okay, have you seen this post on diagnosing and treating "error-less" itunes launch failures yet?
    http://discussions.apple.com/click.jspa?searchID=557875&messageID=1211446
    love, b

  • Indesign CC and Illustrator CC still will not open

    InDesign CC and Illustrator CC still will not open. I have tried every possible option to fix it. I uninstalled and reinstalled the programs. I was contacted by someone in customer service last Monday the 27th of April and my issue is still not resolved. It was stated to me that the issue may be dealing with the server and I have not had any feedback on if the issue was resolved or not. I pay for this software and it has not been working properly since I got it. I have projects that I have been working on that I have not been able to complete in a timely manner. Assistance will be greatly appreciated. 

    Moving the discussion to InDesign
    Atul Saini

  • Iphone not recognized by itunes and my safari also will not open??? Help??

    I bought an iphone and synced it. When unplugging it, I realized all my apps I downloaded were gone off the iphone (I did find them in the itunes folder however) but the issue is, my Safari and my itunes program will NOT open. They bounce once and that is it, never opens. No errors, nothing. I have been going insane trying to figure out what the problem is. Anyone else have this issue?

    See:
    iOS: Device not recognized in iTunes for Windows

  • The iTunes store will not open....-3256.....please help!!!!!!!!

    I just downloaded the 7.0 and my iTunes store will not open. It says "iTunes could not connect to the iTunes music Store, An unknown error occurred (-3256). Make sure your network connection is active and try again."
    My network connection ia active, I tried again a bunch of times, I tried restarting my computer, I read a lot of forums, and tried the tips Apple gives you. Yet the music store will not connect! Please help!!!!!!!!!
    Thank you so much!!!!
      Windows XP  

    Yeah,I have the same problem. I have this problem every time i update iTunes. Usually following tips on the forums helps but this time it's not. I haven't been able to access the music store for so long now. Can anyone help?

  • I just bought a nano and am trying to sync to itune on my mac.  It tells me I need the latest version of itune.  when I try to donwload this it tells me I need a new OS.  I have updated both and my nano still will not sync.  Any suggestions?

    I just bought a nano and am trying to sync to itune on my mac.  It tells me I need the latest version of itune.  When I try to download this it tells me I need a new OS.  I have updated both and my nano still will not sync.  Any suggestions?

    Numbers documents from iOS need Numbers 3.2 on a Mac to open. And Numbers 3.2 requires Mavericks. If you are using Mavericks you can get Numbers 3.2 from the Mac App Store. It will be free IF you have Numbers 2 (iWork '09) installed. Otherwise you must buy it.
    Your other option is to send the Numbers file as an Excel file via e-mail to yourself to open with an earlier version of Numbers.

  • TS1368 I have tried uninstalling and re-installing and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

    I have tried uninstalling and re-installing iTunes and my pc still will not connect with the iTunes Store. I have tried just about every suggestion on the web to no avail, please help.

    When I click on the store it just never opens, I do not receive any message. I try to "refresh the page" and nothing. While having the store selected I go to "help" and check for updates and i get a message; "The iTunes updatte server could not be contacted" and it prompts me to check my internet connection which is fine. None of the items under the "Store" respond with anything.
    I ran a iTunes Diagnostics/ Under "Which Tests do you want to run" I check only "Network Connections" and the results that I receive is...
    Network connectivity:
         Network interfaces, verified
    iTunes Store connectivity:
         Internet connection, verified
         Secure link to iTunes Store, FAILED
    Does this help?

  • My iTunes wont open in Microsoft 7 when I've tried opening it in safe mode it still will not open any help would be great, My iTunes wont open in Microsoft 7 when I've tried opening it in safe mode it still will not open any help would be great

    My iTunes wont open in Microsoft 7 when I've tried opening it in safe mode it still will not open any help would be great, My iTunes wont open in Microsoft 7 when I've tried opening it in safe mode it still will not open any help would be great

    HI,
    First, there are no Mac viruses in the wild.
    recently random sites have had a warning message thing come up that looks like a Norton Anti-virus telling me to run my browser in 'safe' mode or something.
    So far it hasn't really done anything malicious, but I'd like to stop it before it does.
    The file is an .exe file and unless you are running a Windows partition on your Mac, the Mac OS X cannot open those files. You're OK! If you are running Windows then you would need anti virus software, but it would be installed on the Windows partition, not the Mac OS X.
    Nothing to be worry about. They are trying to get your to purchase anti virus software. Norton a/v for a Mac is the worst thing you could install. It's invasive and impossible to UNinstall.
    You are running Snow Leopard... read here.
    Mac Has You Covered - Defense against viruses and other malware
    Carolyn

  • I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! What is wrong?

    I have used Firefox on my computer for several years. Today, after upgrading to the new version, I was not able to open Firefox. I have tried several times uninstalling and re-downloading Firefox. It still will not open! Is the new version not compatible with Windows Vista?

    I hope that link points to mozilla.com or mozilla.org
    You will have to close firefox.exe with the Windows Task Manager from the "Processes" tab of the WTM since you don't have a widow to close.
    The best way to close Firefox is through File > Exit, for those who stuck with the "Firefox" button click on the Firefox button then Exit. It is not perfect but it is a lot better than just closing the window with the "X" in the upper right corner

  • I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto updater it still will not open.  Any suggestions.

    I am trying to open iPhoto 9.3.2 on my iMac with OSX 10.7.4 and even after downloading the iPhoto upgrader it still will not open.  Any suggestions.

    Resetting Printing System helps OS X recognize new printers.
    http://support.apple.com/kb/HT1341
    When you add the printer, make sure you use IP > Jetdirect and the correct printer IP address.

  • I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

    I have an Iphone 4 and the camera shutter wont open, I have tried most things and it has still not opened, it has not worked since I have got it. What should I do?

    Here's basic troubleshooting for iOS:
    https://sites.google.com/site/appleclubfhs/support/advice-and-articles/troublesh ooting-ios
    (Note that my links to other pages may promote my organization, and this should not be taken as an endorsement by Apple)

  • My itunes store will not open.  : (  It has not worked for months.  I have tried everything!

    My itunes store will not open.  It is a blank, white screen when I click on it.  It has not worked for months.  I have installed all software updates more than once during this time and there is still no change.  I am using Mac OSX version 10.6.8 and itunes version 11.1.5.  I have tried every solution I can find on the internet.  Please help!

    Hi Abeaze,
    Welcome to the Support Communities!
    The article below will get you connected with the iTunes Store Support.  These folks can review your account with you:
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBookstore purchase
    http://support.apple.com/kb/HT1933?viewlocale=en_US
    Cheers,
    - Judy

  • After Upgrade to latest iTunes, it will not open.Uninstall and reinstall did not help Getting this error message ''  Runtime Error R6034 '' An application has made an attempt to load the C runtime library incorrectly''. 3 windows PCs.1 vista, 2 windows7 7

        I upgraded to the latest iTunes 11.1.4, after a prompt from the iTunes store. But will not open after the upgrade. One of three error messages told me to reinstall. I did. Restarted and scanned.  But no help there. So I unistalled and re installed from Apples' website. The installation was okay as usual but still will not open. Keep getting the same error messages. '' Runtime Error R6034, ''  '' An application has made an attempt to load the C runtime library incorrectly. Please contact the application's support team for more information.''  That's the error messages I get when I try to open the New installed iTunes 11.1.4. Right now there is no iTunes on any of my PCs. Installed but will not open. Please Help.Thanks.
    Jonas.
    3 Windows PCs. Safari 5.1.5 ( One Laptop with Vista. Two Windows 7 64 bit on All in One Sony desktop PCs. )

    Try the following user tip:
    Troubleshooting issues with iTunes for Windows updates

  • I have Lightroom 3 and have downloaded the DNG CONVERTER 8 7 1 to be able to open my CR2 files from my new canon 7d, however It still will not open my images

    I have Lightroom 3 and have downloaded the DNG CONVERTER 8 7 1 to be able to open my CR2 files from my new canon 7d, however It still will not open my images

    Fab ! Thanks so much. Sorry if these questions are rudimentary but i have been out of the game for a while and getting back into it, i have aged and technology has expanded! Am trying to re learn and keep up ! I appreciate the help

  • HT5037 I installed the iphoto library upgrader and iphoto still will not open

    I installed the iphoto library upgrader and iphoto still will not open. can anyone solve this?

    Option 1
    Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
    If that fails:
    Option 2
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.  
    Regards
    TD

Maybe you are looking for

  • File to File scenario using Transport Protocol FTP  Problem

    Hi, my scenario is a file to file scenario using Transport Protocol FTP there are 3 systems involved a. computer 1 ( My system-source) b. computer 2 (XI server) c. computer 3 (Target system) I want XI to pick file from computer 1 and post it to compu

  • Are my pictures stored in my phone or on the sim

    Just got a new iPhone and I want to keep my pics from my old one. Is my only option to transfer them to the computer?

  • Workspace problems, please help

    When I start Indesign, the only window pane I see is the application bar, but it only takes up half the screen. When I toggle through the workspace presets, nothing changes or appears. If I choose to show a specific window pane such as "layers", it a

  • Won't switch on?  and Where's the Serial Number?!

    Hi guys, I'm trying to get to the bottom of a broken MacBook which I have. It's one of the white ones, and I remember I got it in 2007. Not used it for absolutely ages, because it essentially died and I bought a new one, so I thought I'd try to sell

  • Cannot install NMH300

    I have an NMH300 Media Hub and I cannot get it to install via the setup application on Windows Vista x64. The setup application always complains that the device cannot be found. However, the device boots up OK and I can reach it via http://mediahub.l