Trigger&Ga​te Express VI. Is it possible to control Dialog Box parameters on the frontal panel?
When you use a Trigger&Gate Express VI the Dialog Box Options permits you to configure the VI. I am asking if it is possible to control Dialog Box parameters with controls on the Frontal Panel. I am especially interested on Start Level Threshold.
open the VI that the trigger and gate is in. Right click on the express VI and select open front panel. Then find the control that you want and edit the connector pane to be able to input the parameter that you want. Attached is a modified version that I came up with for you.
Hope this helps you.
Joe
Joe.
"NOTHING IS EVER EASY"
Attachments:
example_trigger_and_gate.llb 92 KB
Similar Messages
-
Is it possible to save/export Messages created in the Discussions Panel?
Is there a way to save/export messaegs created in the discussions panel? For example, when saving a report to PDF or Excel, is it possible to include the discussion messages? Is there a way to query the Discussion Messages so that they could appear on a report?
You can't query for discussions directly in a report. In the CMS database this information in a binary format.
You would have to either use the Query Builder tool or write a program using the SDK to get to it. The query you would run looks something like this:
Select *
from CI_INFOOBJECTS
where SI_PARENTID = (SI_ID of the report the discussion is attached to)
and SI_HIDDEN_OBJECT = 1
and SI_KIND = 'DISCUSSIONS'
-Dell -
Is it possible to control a GPIB instrument by the instrument through GPIB
I'm having a Function generator, it has an in built GPIB, I'm writing an application on oscilloscope which also as GPIB, I have connected the GPIB port of oscilloscope to the FG GPIB port. I tried to send a GPIB command from the oscilloscope to the function generator. I wanted to know whether it is possible to control an instrument from a instrument through GPIB.
The answer is yes and no. There are three categories of devices:
talker/listener
talker/listener/controller
talker/listener/controller/system controller
Most instruments are "talker/listen-only". All they can do is act like a device on the GPIB.
You do run across a few instruments that are "controllers' as well. These instruments can be passed control from the system controller to temporarily control the bus, perhaps to calibrate themselves with a collaborative instrument. To find out if your instrument supports this, you probably need to look in the instrument's user manual.
The other option is for the device to be a system controller. This means that the device can control the bus at bootup (system controller) and run a host-side API (i.e., NI-48
8.2) to control an instrument. This sounds like what you are interested in.
I hope this helps. -
Whether it is possible through plsql to change parameters of the chart?
Having set constant number in these fields («Y Axis Min », «Y Axis Max», «Chart Width»,«Chart Height »,«Maximum Rows») it is possible to change parameters of the chart.
And whether it is possible to change them during performance of the program (to substitute in them the necessary plsql-variables)?A question for the HTMLDB gurus, has the limitation been fixed? I mean, can you use variables to set min/max for charts?
I am using htmldb 2.0 and I can not put anything but constant number for min/max.
btw. is there a way to use htmldb api to manually code a chart so I can set min/max dynamically like what we have in Microsoft Excel?
Thanks. -
Is it possible to edit multiple box-shadows inside the Dreamweaver Properties Panel ?
Is it ?
Nopes , Only the first one is editable .
I would suggest you to log a request to us at https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
This would help putting this item on our to do list and depending on number of such requests we will consider them for implementation -
SQL Expression Fields (Field Explorer dialog box)
I have Crystal Reports Version XI. When I open the field explorer I can't see "SQL Expression Fields (Field Explorer dialog box) "
Please help.The following information helps you
Symptom
In Crystal Reports 9 and later, the 'SQL Expression Fields' is unavailable in the 'Field Explorer' dialog box. The report is reporting off a stored procedure or command object.
Why are 'SQL Expression Fields' unavailable in the 'Field Explorer' dialog box?
Resolution
'SQL Expression Fields' are unavailable in the 'Field Explorer' dialog box because the report is based on a stored procedure or command object.
When connecting to a Stored Procedure or using a command object the SQL Statement is predefined and cannot be modified by Crystal Reports therefore the SQL Expression field will not be available when connecting to either of these objects.
The SQL Expression field works by adding an entry into the SELECT portion of the SQL Statement in a Crystal report. A SQL Expression Field is only available in a report when:
u2022 The report connects to tables or views.
u2022 Crystal Reports generates the SQL statement.
regards,
Raghavendra -
Is it possible to preview images in the files panel?
sorry in advance for what probably is a dumb question with a
simple solution.
i realize i can preview images in the assets panel-- but is
it possible to preview image files while in the files panel
instead?
i have a lot of images organized within folders in the files
panel-- so it's easier there to locate and visulalize an image--
than scrolling down the long list in the assets panel.
thanks.Hello,
I don't believe there is a way to view images in the files
panel.
However, there's a quick way to see them if you're using
Windows.
Select your image folder in the Files Panel.
Right click and choose "Explore".
It opens a window where you can see all the images in that
folder.
It's much faster than scrolling through the assets, clicking
the file names
and reading the paths to know where they are.
This is very handy whether you have image folders in
different directories
(for organization and cleaner img src paths in the pages
within the
directory) or if you just dump them all in a folder in the
root.
On my wishlist: Hover over the image name in the files panel
and a small
box, like a tool tip, displays the image.
Maybe someday.
Take care,
Tim
"dexter manika" <[email protected]> wrote in
message
news:go4to8$k1m$[email protected]..
> sorry in advance for what probably is a dumb question
with a simple
> solution.
>
> i realize i can view images in the assets panel-- but is
it possible to
> view
> image files while in the files panel instead?
>
> i have a lot of images organized within folders in the
files panel-- so
> it's
> easier there to locate and visulalize an image-- than
scrolling down the
> long
> list in the assets panel.
>
> thanks.
> -
SAP express office info dialog box
Hi experts,
Upon saving transactions IW31 or IW32, this dialog box appears with the message:
"Error during creation of transfer orders for mater" received from
author <name>
We noticed that it is being picked up in table SOXP, what triggers in the transaction for this message dialog box to pop out? What triggers the program to go and look at table SOXP?
We also noticed that there's no stoppage in the transaction as the PM order still performs the necessary material transactions.
Thanks a lot.Hi Jurgen,
Thanks for the prompt response. If it's a posting failure, why is it I can still view the material document transaction in MB51?
Currently, we are treating it as a warning message rather than an error one because we see that all the necessary transactions are recorded and done in the order.
We are wondering why it keeps on appearing and where the error is on our side. We have more than enough sufficient stocks to fulfill the orders.
I checked SM13 and saw a table wherein it contained function module name, type, and update return code but unfortunately, I don't know how to interpret these.
I can see various function module names, and the types are either V1 or V2, and the update return says initial. What do those types and return message mean?
In the administration button, and paramter rdisp/vb_mail_user_list, select and click docu button, will it be possible to remove the appearance of the dialog box?
Thanks a lot. -
HiFi + Airport express + NAS + Remote App = possible?
Hi, I would like to be able to play my mp3s without my pc switched on. Can anyone tell me if it is possible to control music with the Remote app on my iphone streamed to an airport express from a NAS which has an itunes server function? I thought a time capsule would be perfect for this task but seems it does not do this.
Any help would be much appriecated
Thanks, Jay.It looks like the only way to control music with the Remote app and PC turned off is through an Apple TV.
I hope I can be proved wrong.... -
Iphone PS Express to Windows 8 Possible?
I am a long-time user of PS Express for iphone and ipad. I have paid for many premium looks, special tools, etc. I recently purchased a HP laptop w/ Windows 8 and downloaded the newest versions of Adobe Photoshop Express and Adobe Revel on said devices.
My question is: The paid features (i.e. reduce noise, premium looks) from my ipad and phone did not transfer to my laptop. Is there a way to transfer them to the laptop so I do not have to pay twice? I am new to Adobe products, so I'm not sure how to connect my paid features between the 3 devices (phone, pad, PC).
Thank you!!In-app purchases on iOS will not work on Windows devices as the account with which the purchases are made are different.
WinPhone purchases will work on Win Tablet. -
ThreadOpt values - is it possible to set them and what are the ranges?
Hi there,
I have a problem on my TestStand 4.2 platform, with test step result, formed and received from called external sequences results. In my Main sequence, in Post-Expression I defined condition, according to which the "Step.Result.Status" is passed or failed, and it works. But the problem is that in Status Expression field there is following statement: "(Step.Result.Status == "Done" && (Step.TS.SData.ThreadOpt == 0 || Step.TS.SData.ThreadOpt == 3)) ? "Passed" : Step.Result.Status". After deep search in the user manual, I found that (Note from "Expression Tab - Step Properties Dialog Box"): "Certain types of steps, such as Numeric Limit Tests, Multiple Numeric Limit Tests, String Value Tests, Pass/Fail Tests, and Statement steps, reserve one or more of these expressions to perform operations specific to the type of step or a substep performs the operation. In these cases, you cannot use the expressions the step type reserves, which appear dimmed on the tab."
Now, my problem is that at this specific step I call to an external sequence, which returns results and it is correct, but if these results, compared to expected are not the same, my step in the main sequence fails. Which is OK. But when the final report is generated I see there "Number of Tests Failed: 0", which is not OK. Since I can't change the "Step.Result.Status == Done", which comes from the external sequence, I thought that may be there is a place to change the "Step.TS.SData.ThreadOpt" and this way to cause to main sequence to correctly report "Failed Tests <> 0"???
Does anyone has an idea whether it is possible to set this the ThreadOpt value and what is the accepted range?
Your feedbacks and inputs are highly appreciated.
StephanGSinMN wrote:
Hello Doug,
I didn't think I was modifying any hidden properties. It's just configuring a sequence call step when you add it to the sequence. The "Execution Options" are clearly shown in a dropdown menu on the Module tab. I was just pointing out that this seems to be what sets the ThreadOpt variable.
GSinMN
Maybe I misunderstood. When you said "My normal process is to set it to 1, but based on this info, it needs to be either set to None or Use Remote Computer if you want anything other than "Done" to be returned." I thought you meant that you were setting the property directly rather than setting your sequence call steps to "New Thread" with the combobox.
-Doug -
Is it possible to play my guitar and have the sound changed to different instrument like a sax? Have my Mac act as an emulator. I'm a guitar player, not a sax player, but I want a sax solo in my song.
You'd need a midi guitar for that. GarageBand does not create midi from audio. Use a different application, like Finale to create a midi file from your Guitar audio file.
Or play the sax track using a midi keyboard or simply GarageBand's musical typing. You can use the track editor to add expression and articulation afterwards. -
By double clicking on a step in the TestStand Sequence Editor the Properties dialog box pops up.
How to change this behaviour?
I would like to configure my step type so that each time I double click the step, the Express VI configuration dialog box pops up, instead of the properties.
One Idea is to use custom activeX substeps, for example, Antonio Lie mentioned the substep "OnNewStep" in my last post. Is there also a "OnDoubleClick"?
Does anyone know a list of activeX substep that can be used? Or are there other ideas?
Thanks a lot!!!
- Caribe -Caribe,
1. Currently it is not possible to change the behavior for double clicking on a step. It is a good idea though, and we will be consider to add it to the next versions of TestStand.
2. "OnNewStep" is the only "special" substep. It was implemented for internal use and it is not documented yet.
3. If you want to know more about substeps you can red the Reference Manual, Chapter 13 is a good place to start.
4. I want to make clear that "OnNewStep" is called every time you insert a new step. The sequnce editor gets the substeps list and if it finds the "OnNewStep" substep in the list It calls it using the API. The substep can use any adapter type, It does not have to be the ActiveX adapter.
Hope it helps. -
How do I use the time capsule to share itunes music between multiple apple devices? Also, is it possible to control the music on one device using another, and how do you set this up?
unless i'm missing something, i think you got mixed up, this is easy google for walk throughs
i'm assuming this is the new 3tb tc AC or 'tower' shape, if so, its wifi will run circles around your at&t device
unplug the at&t box for a minute and plug it back in
factory reset your tc - unplug it, hold down reset and keep holding while you plug it back in - only release reset when amber light flashes in 10-20s
connect the tc to your at&t box via eth in the wan port, wait 1 minute, open airport utility look in 'other wifi devices' to setup the tc
create a new wifi network (give it a different name than your at&t one) and put the tc in bridge mode (it may do this automatically for you, but you should double check) under the 'network' tab
login to your at&t router and disable wifi on it
add new clients to the new wifi network, and point your Macs to the time machine for backups -
Received this error (The workflow could not update the item, possibly because one or more columns for the item require a different type of information.) recently on a workflow that was
working fine and no changes were made to the workflow.
I have tried a few suggestions, i.e. adding a pause before any ‘Update’ action (which didn’t help because the workflow past this action without incident); checked the data type being written
to the fields (the correct data types are being written); and we even checked the list schema to ensure the list names and the internal names are aligned (they
are), but we still cannot figure out why the workflow is still throwing this error.
We located the area within the workflow step where it is failing and we inserted a logging action to determine if the workflow would execute the logging action but it did not, but wrote the same error message.
The workflow is a Reusable Approval workflow designed in SharePoint Designer 2010 and attached to a content type.
The form associated with the list was modified in InfoPath 2010.
Approvers would provide their approval in the InfoPath form which is then read by the workflow.
Side note - items created after the workflow throws this Unknown Error some seem to be working fine.
We have deleted the item in question and re-added it with no effect.
Based on what we were able to determine there don’t seem to be any consistency with how this issue is behaving.
Any suggestions on how to further investigate this issue in order to find the root cause would be greatly appreciated?
CheersHi,
I understand that the reusable workflow doesn’t work properly now. Have you tried to remove the Update list item action to see whether the workflow can run without issue?
If the workflow runs perfectly when the Update list item action is removed, then you need to check whether there are errors in the update action. Check whether the values have been changed.
Thanks,
Entan Ming
Entan Ming
TechNet Community Support
Maybe you are looking for
-
i replaced my old iphone to a new one.. i want to get my photos from icloud,,,, i had almost 3 gb of photos backed up on icloud,,, how can i transfer all those photos to my new phone,, i tried but i only got 90 photos. those are the recent one. i had
-
I have developed a batch harness whereby all scheduled tasks (W2012) invoke a common powershell script that acts as a wrapper to all our housekeeping jobs. The first step in the wrapper is to create a Transcript file using following code if ($Host.na
-
2560 x 1440 in VMware Workstatio​n 11 with X1 Carbon 3rd gen?
I've installed Windows 10 Preview in a virtual machine with VMware Workstation 11 on my X1 Carbon 3rd gen. (20BS). By default, the display in the VM is recognized as Generic Non-PnP Monitor and the highest compatible resolution I can select for it is
-
Only allow user to Save as, not Save
I want my form to be used within the company as a template when opened in Reader. With this I mean that the user never overwrites the original pdf, but is forced to "Save as" ("Save" should not be available as a choice). In other words: the pdf is op
-
OK.. so i get a gift from a friend. The M AUDIO Firewire Solo. I am stuck. How do i select this to be my audio input on Garage Band V 1.1.0 I WOULD LIKE TO plug my guitar in. Do have to download drivers?.. .My friend is driving me nuts to see how i l