Trigger output in VT02N automatically when changes done to Shipment.

i have created new output type ZXXX for VT01N and VT02N (shipment) for sending Fax.
my task is:
this output type has to be triggered automatically and fax has to
be resent when any of below changes made using Tcode VT02N
here are the changes:
Changes made to the shipment start date/time field-
VTTK-TKNUM- DPTBG
VTTK-TKNUM- UPTBG
When there are stop order changes made to the stages
VTTS=TKNUM-TSRFO
When the carrier is changed in the shipment
VTTK-TDLNR
When delivery appointment date/times are entered or changed.
VTTS-TKNUM-DPTEN.
VTTS-TKNUM-UPTEN.
how can we do this?
Edited by: RamaKrishna Karnati on Jun 10, 2008 3:12 PM
Edited by: RamaKrishna Karnati on Jun 10, 2008 3:30 PM
Edited by: RamaKrishna Karnati on Jun 10, 2008 3:31 PM

Hi,
try the user exit EXIT_SAPLV56U_004.
use the following tables parameters of this function module to determine whether the values are changed:
I_XVTTK - Shipment Headers (Current)
I_YVTTK - Shipment Headers (Old)
I_XVTTS - Shipment Stages (Current)
I_YVTTS - Shipment Stages (Old)
if any change is made to any of the fields, you can trigger the standard output type by using the function module WFMC_MESSAGE_SINGLE. you will have to pass a structure of type NAST with the required vlaues.
try this...
cheers
jubin

Similar Messages

Automatic output determination for SO when changes done

Hi
I created one output type ZNSO for sales order and created access sequence and condition record for Order Type in VV11. Now, I am able get that output type ZNSO in messages automatically while creating SO (VA01) and posting an IDoc.
But, my requirement is, If I change the sales order (VA02) that should post an IDoc automatically (User doesn't want to enter output type manually).
How can I achieve this. Plz help me on this.

Hi
In NACE, Select the output type.
There in GENERAL tab,
CHECK on MULTIPLE ISSUING,
Fill Program as FM06AEND and
Form routine as CHANGE_FLAG.
BR
Asik.

How do I output the smoothest video when changing or mixing frame rates from the original footage?

I have been experimenting with various Media Encoder settings, and wondered if there was anything else I can try to get the smoothest video output possible, especially when changing frame rate and possibly resolution. For clarification, let me start from the beginning and explain what I'm doing and what I've tried so far. I'll try to be as brief as possible, but if I do go into too much detail, I apologize.
My original footage is AVCHD 1080p - 60fps. (my camera only does 60fps...specifically 59.94fps) We're not talking interlaced video here, I'm staying away from that. This is definitely full frame, progressive video at 60 frames (not fields) per second. My output will ultimately be for the web. I have been keeping my output codec (H.264) and bit-rate (VBR 2-pass, relatively high-bitrate) consistent, and have been trying numerous output options and even sequence settings to see what would yield the best results. I am using Premiere Pro CS5.5 along with Media Encoder. Here's what I've done and the results I've observed:
1. I created a sequence with 1080p - 59.94fps settings to match my original footage. I then output both 1080p and 720p versions at 59.94fps, and at 29.97fps. The 59.94fps output files looked absolutely great, as would be expected. Extremely smooth. The 29.97fps output files were generally smooth, but not near as smooth as the 59.94fps. This is expected since it's half the frame rate as my original footage. However, my question is this: What exactly is Media Encoder doing when "down converting" from 60p to 30p? From a technical stand point, is it dropping every other frame? I'm just curious to understand exactly what it does. I tried the Frame Blending option as well, and that only yielded a bit more blur to the images which wasn't desirable for any of the output files.
2. Just to see what would happen, I created a sequence with 1080p - 29.97 settings. I then output both 1080p and 720p versions at 29.97fps. The video was much more choppy in these cases, even with Frame Blending on. Now, I know not matching my sequence settings with my original media isn't ideal, but I again just want to understand why this yields less smooth video than the 29.97fps options above. Why does cutting the sequence settings frame rate in half from the original, then outputting the same frame rate as the sequence yield video that is not as smooth?
3. Next, I wanted to try mixing frame rates to see how Premiere and Media Encoder handled the footage and output files. Premiere handled it great, no issues there. However, I had some interesting things happen when I output the files. Here's what I did: I created a sequence with 1080p - 59.94fps to match my original footage. Then I took the same exact footage that was in my sequence, copied it in my project panel and interpreted it at both 23.976 and 29.97 fps, yielding slow motion video. The slow motion video looked great in Premiere, so I went ahead and just added it to my sequences, along with the original 59.94 footage. I also created separate sequences for the 29.97 and 23.976 footage respectively, each with matching sequence settings, then added a nested sequence to another original footage sequence (with 59.94fps sequence settings) to see which yielded the best results. Basically, I'm trying to output 59.94fps that match my original footage, but also throw in some slow motion footage at different framerates. I'll explain my results in a moment as they are a bit convoluted, however, here is my question: When mixing frame rates and trying to output the smoothest video, am I going about this the right way? I would assume you would use your sequence settings that match the original footage (which is what the majority of the footage will be), then bring in a nested sequence for the slow motion (as oppose to just dropping the slow motion video directly into my main sequence), and then output to the same frame rate of the majority of the footage, in this case 59.94fps. Is there a better workflow for this?
The results to #3 above were as follows. Initially, it looked like it didn't matter if I nested the slow motion sequence into my main sequence, or simply dropped the actual slow motion video into my original 59.94fps sequence. It seemed to produce smooth results either way. Frame Blending blurred the video a bit, but didn't seem to make much difference, and quite honestly I like the footage without Frame Blending in general. However, when I closed down Premiere, and opened the output files later (opening in Quicktime), the footage looked choppy. In fact, it would go from choppy to smooth and back, almost like it had an irregular cadence (don't know if I'm using "cadence" in the right context here). I would then open up Premiere again, import the output footage into my project panel, and play the footage in Premiere, and it would play back smooth again. Is this a Quicktime issue? I was playing 1080p 59.94fps files when this happened, so maybe it's just because it's a large file. Doesn't seem to have issues with the 720p files I created. But it sure threw me off with my testing because I then started second guessing the settings I was using. My iMac is the latest 2011 model with plenty of RAM, so I wouldn't think it's the computer. Thoughts?
4. Next, I noticed on ALL my output files (again, using the H.264 codec from Media Encoder) that the color of my video seemed to flatten quite a bit. It seems that the original footage has more contrast and saturation than the output files. I figured maybe this was just how it was, but when I re-imported the output files back into Premiere, they looked IDENTICAL to the original footage. And in Media Encoder's Source/Output windows, I don't see any difference there either. Is Quicktime again the culprit here, doing some odd things to the color of my videos?
5. Regarding Frame Blending, when is the best situation to enable this option in Media Encoder? I've read it is when mixing frame rates, but I honestly didn't see too much of a change except for a bit more blur, which I didn't care for.
6. Lastly, my conclusion is that 60fps yields the smoothest video, which is an obvious conclusion. However, I know that 60fps isn't the best or easiet frame rate for web delivery. It seems 30p is more the standard. Are there any integrated web players that would play 60fps? Can you get 60fps video on YouTube/Vimeo? If yes to any of these questions, can they do 720p and 1080p at 60fps?
Those are all my questions. I hope I am clear enough without being overly wordy and hopefully I didn't put too many questions into one post. Thanks in advance for any insight, I really appreciate it.

Did you ever figure out which output worked the best? I have the same original footage; trying to determine the best output settings to make a dvd for tv.
thanks!

When reflow text; How to change paragraph automatically when changing frame

Hi
Im new to indesign scripts, but thought that this maybe was the right forum to ask the following question. (Im using Adobe Indesign CS.5 )
Im currently trying to import a file (word file / excel both is possible) into an indesign book and formatting the text automatically!
My question is: How is it possible to reflow text into frames and when changing frame it changes paragraph?
I have already figured out how to reflow the text, and actually also managed to relow text into the frames and change paragraph style. I know how to use the keep option, and by this change the paragraph style when e.g. changing frame break/page break etc. (but if the content being flowed-in is not tagged with style names then I cannot figure out how to do it)
The document and its content I whish to import do not have any tagged paragraphs!
If any of you have a hint, I would be more than happy to hear from you

My question is: How is it possible to reflow text into frames and when changing frame it changes paragraph?
This question is not gramatically correct and I cannot understand what you are trying to ask.

Typeface changes automatically when changing color on text within a bullet

Something very weird is happening when I change the color of the typeface within a bullet. As soon as I click on the new color in the Colors palette, the typeface changes to another typeface (one that doesn't even show up in the Fonts palette, so I don't even know what it is). I went back to make sure the slide master had the correct typeface, which it does, and I have the typeface installed on my computer.
This does NOT happen when I select the entire bullet, just when I select text WITHIN the bullet.
Any idea what might be causing this?
Many thanks for any help you might provide.
Margaret

Is there a character style applied to the table or text in the table. I had many issues with this over-riding my paragraph style.

Output becomes muted automatically when track is played

Strange problem.
I play my track in Logic, it runs smoothly for three or four bars then the volume is completely muted. The output goes to zero (there is no signal), but the rest of the tracks on the mixer have the appropriate signal, as if the song were still playing.
So the individual tracks show that they have an incoming signal, but the output shows no signal. The track is still playing in the arrange as the track header continues to play. But there is no sound.
Can someone please help me with this?

No, but if you play songs from one playlist you can then switch to viewing another, or the main music playlist, without being drawn to current track when the track changes.
tt2

Delta Records is not getting updated in delta queus when changes done

Hi All,
In Quality system , when a user makes a change to an order's ship-to address, the changes are "triggering" a delta record into the delta tables for BI to extract. This can be seen via tcode rsa3's delta tester.
In Productionn System, when the user makes the exact same change, nothing is added to the delta table and the changes never come over to BI unless a full extract is request for the order.
Why changes not getting updated, please give your inputs.
Thanks & Regards,
Venkat Vanarasi.

Do you have your V3 update job active and running? THis job wites changes to the delta queue. Of course your datasource has to been initialized and a delta queue should be setup. You can check it in RSA7.
Regards,
Juergen

BOM Component changes when changes done in VC

Hi All,
When ever we are changing the characteristic values in Variant configuration, it result the component changes in the BOM.
Please any body let us know how to find the what are the component changes in the BOM when we change any characteristic value in VC. Is there any FM or it will store in any table?
Regards,
Vasu.

Sure Vasu,
Find explanation on this as below :
BOM components are selected by making use of a special type of dependency called SELCETION CONDITIONS.
If you want to find which BOM components will be selected on selecting which characteristic value, then follow the below given procedure :
1. goto T.Code CS03.
2.enter BOM header name , plant etc. and press enter.
3. now you are in inside BOM.
4. Select any BOM component for which you want to check when will it be selected during configuration.
5. then, in top menu , choose Extra --> Object Dependencies --> Assignments
6. It will display all Object Dependencies assigned to that BOM component.
7. Select the Dependency with type Selection Condition.
8. Click on Dependency editor.
9. It will show you the Dependency code
10. when the condition as per this code is satisfied, the component is selected during configuration.
Please revert back if you have any doubt.
Reward Points.
Regards,
Gaurav Raghav.

Messages - Is there any way to resend texts automatically when you don't have signal, rather than having to constantly manually 'try again'?

When i have no signal and send a text, a red circle appears, prompting me to manually resend the text when i find signal. I live in an area with varied signal so this is beginning to get frustrating. Is there any way to set the iphone so it will automatically resend the text when it finds signal again, rather than having to manually resend it everytime? Thanks

When i have no signal and send a text, a red circle appears, prompting me to manually resend the text when i find signal. I live in an area with varied signal so this is beginning to get frustrating. Is there any way to set the iphone so it will automatically resend the text when it finds signal again, rather than having to manually resend it everytime? Thanks

Component changes when changes done in VC

Hi All,
When ever we are changing the characteristic values in Variant configuration, it result the component changes in the BOM.
Please any body let us know how to find the what are the component changes in the BOM when we change any characteristic value in VC. Is there any FM or it will store in any table?
Regards,
Vasu.

Hi Anji,
Thanks for your reply.
The above FMs are returning only the characteristic changes. But i need to to find the Changed Components in BOM if the characteristic value changes. Plese give any other FM if you are having.
Regards,
Vasu.

Settings to trigger output at the time of PGI in shipment

Dear Friends,
I have a requirement where an output has to be triggered from the shipment document (VT02N), when the post goods issue is completed.i.e when the user completes the "shipment start" stage in the shipment document.
The output document has to be sent by email to a couple of users when PGI is completed in the shipment.
Since,here we are not manually triggering the output, instead the output is triggerred automatically when PGI is done.
Please let me know the settings to trigger a particular output when PGI is done.
Waiting for valubale feedback.
Regards,
Sampath

Hello,
You can do this through Configuration.
LE>Transportation> Shipments >Define and assign activity profile
With reference to shipment type you have 7 status available. In your case Shipment begin stage you can Set PGI and Output trigger by creating variant.
All you have to do is put the mouse on the "at shipment begin" and select maintain and you can see the PGI option and output fields where you can call the output type there.
try it will work....
tkreddy
Edited by: Tkreddy on Nov 10, 2009 3:00 AM

Update weight and volume when changing the quantity

Hello ALL,
For some configurable items, those whose weight and volume depends on configuration, when changing the quantity at set level, weights and volumes are not calculated again and order item is saved with wrong data about weights and volume.
when ever changing the quantity we will get a message - " Changing date/quantity may result in different BOM Please configure"
if we do explicitly by clicking "Item Details Configuration' then Weight and Volume will get update automatically.
my requirement is Weight and volume should get update automatically when changing the quantity with clicking on "Item Details Configuration'.
could you provide any OSS notes available for this or any help to achieve this functionality.

Dear Prathap Naidu P,
Did you solve this issue?
Because I have the same problem, and I was looking for hints.
Thank you so much for any help.
Best regards,
J.Flanders

Issue when changing a PO: it creates a new output record automatically

Hello,
The goal is to prevent that a new output record is automatically attached to a purchase order after a change has occurred.
Current situation:
Create a PO for holding and an output record is created for output type ZHP1.
Release PO.
Print the PO in ME9F.
Change the condition record in MN05 and change the language of the print to a different language than the one of the supplier.
Change the PO by adding some header text, the system adds a second output on the purchase order in the language of the cond record.
This should not happen.
Any idea how to achieve this goal rather via customizing than new implementation/changing the SAP standard code!
Thank you in advance.
Aydin

Hi, I'm working with Aydin on this issue.
It creates the second message on the PO and if processed via ME9F then it prints.
But we dont want even that the second output gets created.
We do not work with version management so changes to PO do not create second message.
This second message comes up because language code has been changed in MN05 (one time change) after the first print.
System sees that first message on PO is with language A and now condition record is with lang B.
So If I change any little thing on the PO just to trigger message redetermination, it attaches a second output in the lang B.
If I dont change language code in MN05 and I still do my little change on PO, then it does not attach a second output message (which is good for us)
I thought the only way out is to write a requirement program that would check that if a message already exists on the PO for that output type then dont create a second one. What do you think?
Marc
Edited by: mmlafe on Jan 3, 2012 5:02 PM

My firefox opens automatically when the computer turns on and I don't want it too. What can I change?

When my Mac starts up, Firefox starts opening immediately. I don't want it too. How can I change it so it doesn't do this anymore.

See [[Firefox launches automatically when your computer starts]]
* Control-click on its Dock icon and uncheck 'Open at Login'
* Click Accounts (in the System row of the System Preferences window)
** Click the Login Items tab
** Click on Firefox in the list

Automatic Output Message when Changes are made to a PO

Hi Gurus,
I would like to know to to set up automatic print or fax for PO output once changes are made to it. I was able to send automatic print/fax when i create a new PO. But when that same PO is changed, i still need to go to ME9F to fax it. Is there a way to make it automatic?
Thanks,
Jograd

Hi Greetings
would like to know to set up automatic print or fax for PO output once changes are made to it. I was able to send automatic print/fax when i create a new PO. But when that same PO is changed, i still need to go to ME9F to fax it. Is there a way to make it automatic?
You need to make the following u201CFine-Tune controlu201D settings for the output type so that output will be generated automatically once changes are made.
ONLM --> Messages --> Output control --> Message types -->Define Message Types for Purchase Order --> Fine-Tuned Control: Purchase Order --> Include indicator 2. Printout of changes for the output type.
Gobinthan G

Trigger output in VT02N automatically when changes done to Shipment.

Similar Messages

Maybe you are looking for