Trimming Time Stamp in File Name using IC
Hello,
scenario is File to File without mapping. We are using Integrated configuaration to achieve this.
Issue is on target side file name is being written as xyz.ddmmyyyy-ssssss
but we need to eliminate milliseconds and need target file name as xyz.ddmmyyyy only.
any inputs on how to achieve this please? I am struck here as we cant use UDF since we do not have mappings.
Thanks.
Hello,
Aside from scripts, you can use an adapter module to fulfill your requirement:
http://wiki.sdn.sap.com/wiki/display/Snippets/DynamicfilenameinaFiletoFilepassthroughscenario
Hope this helps,
Mark
Similar Messages
-
Help adding current Date and Time stamp to file name
I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile.htm 8/29/2007 11:41 AM
This is my script:
<script>
function doSaveAs(){
if (document.execCommand){
document.execCommand('SaveAs','1','myfile.htm')
else {
alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form>
Thank youI agree, I guess I overlooked that!
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
I need help with my script adding current Date and Time stamp to file name.
This is my file name = myfile.htm
I would like to save it as = myfile 8/29/2007 11:41 AM .htm
This is my script:
<script>
function doSaveAs(){
if (document.execCommand){
document.execCommand('SaveAs','1','myfile.htm')
else {
alert("Save-feature available only in Internet Exlorer 5.x.")
</script>
<form>
<input type="button" value="Click here to Save this page for your record" onClick="doSaveAs()"
</form> -
Need to add date/time stamp to file name without time change creating new files
We have setup our application to save data once a trigger event occurs. We also need the date/time stamp as part of the file name. We used Format Date/Time String and concatenated it into the file name. It all works good, but as the time changes (seconds, minutes, etc.) it causes the Write to File to create a new file with the new filename. Is there a way to create the file and save/latch/buffer the time in the file name so that it doesn't create a new file for every second?
I've attached a shot of the relevant part of our VI. It's all in a big while loop. The data save is in a case/switch so that when it is triggered it starts saving. (The for loop is to split the data up
into 4 different files). Like I said, it all works except new files are created every second as the time changes instead of just putting it all in one file with the initial time in the file name.
Attachments:
TimeInFileNameQuestion.jpg 46 KBI need a loop in order to use a shift register. I cannot stop the outer while loop (because it would stop the hardware from collecting data), and I cannot add loops inside which bogs down the processor to where the app stops. I've attached a simpler version of my VI which illustrates the problem. While the button is pressed (the trigger) it should save the data (in this case just cycle numbers) into one file with the initial date/time. But, you can see that it creates 1 file/second. I tried using shift registers, but without adding extra loops I can't see how to do it. Thanks
Attachments:
FileNameTest.vi 29 KB -
Ignore time stamp in file name to load infopackage
Hi
Everyday a .csv file gets written into a particular folder in my application server. the filename is as TESTYYYYMMDDHHMM.csv.
Now i have written a program to pick up the file with TESTYYYYMMDD, but the time stamp doesnt match, hence i have to ignore it when i read the file.
Can someone please tell me some simple logic/Abap code to ignore the time stamp in the name? i have tried using TESTYYYYMMDD*.csv, but that doesnt work.
Please help. this is very urgent.
Thanks
SushmitaI read the content of the folder into an internal table usign EPS_GET_DIRECTORY listing. i cud read that into a variable, using a simple loop.
and pass it to the Infopackage as file name. -
Add the time stamp ater file name (suffix)
Hi friends,
i need help for below requierment.
I want to add the time stamp for my file name.
like *filename YYYY-MM-DD-HH-MM-SS.txt*
i don't know how to wirte the UDF for this. please any help me on this.
thanks
Srini..Hi,
You have to Use Add Time Stamp Option in the Receiver File Adapter--Under File Construction Mode
Check this
http://help.sap.com/saphelp_nw70/helpdata/EN/ae/d03341771b4c0de10000000a1550b0/frameset.htm
REgards
Seshagiri
Edited by: N V Seshagiri on Oct 14, 2008 2:02 PM -
Want to append time stamp to file name in log4j property
Hi
I want to append the timestamp to name of log file.
here i am attaching my sample log4j.property file
plase heple me for correct syntax
log4j.logger.bar=DEBUG, dest1
log4j.appender.dest1=org.apache.log4j.DailyRollingFileAppender
log4j.appender.dest1.layout=org.apache.log4j.PatternLayout
log4j.appender.dest1.file=log.log
#log4j.appender.dest1.append=true
log4j.appender.dest1.datePattern='.'yyyyMMdd
log4j.appender.dest1.layout.ConversionPattern= %d{dd-MMM-yyyy HH:mm:ss aaa} [%3p] %n%m%n%n
log4j.appender.dest1.encoding=UTF-8
log4j.logger.foo=DEBUG, A2
log4j.appender.A2=org.apache.log4j.RollingFileAppender
log4j.appender.A2.layout=org.apache.log4j.PatternLayout
log4j.appender.A2.File=example1.{timestamp}.log
#log4j.appender.A2.append=true
log4j.appender.A2.layout.ConversionPattern= %d{dd-MMM-yyyy HH:mm:ss aaa} [%3p] %n%m%n%n
#log4j.appender.A2.datePattern='.'yyyyMMdd
log4j.appender.A2.encoding=UTF-8Is your google broken?
http://www.google.com/search?q=log4j+timestamp+syntax+examples -
is there a capability to save/export the new airport 2TB time capsule settings file when using the iphone/ipad airport utility. set-up wasn't a problem but the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
the "file" button does not exist on the latest airport utility app v6.3 to save the configuration file.
Sounds like you are a bit confused with version numbers.
Latest AirPort Utility version for the iPhone / iPad is 1.3.3. There is no option or capability to export/import settings on the iOS version(s) of AirPort Utility.....although you could take a series of screen shots and save them for future reference.
AirPort Utility 6.3.x is found on a Mac.....not on iPhone / iPad. Export and Import options are found under the File menu in 6.3.x. -
How do I get time stamped Wav files created in L7 to lock to time code?
Hello everyone,
I did a search about time stamping audio files and was VERY happy to discover the "broadcast wave" format timestamps audio files! So I'm running tests, but cant seem to get logic to actually place the audio file according to the time stamp!
Method: I'm currently scoring a film, and have each cue as separate logic files. To sync Logic's timecode and the TC window burn, I set in the "sync" song settings that bar 1 play at the start of the cue (no offset). For example, If I want to start writing a cue at 1:06:27:05, I just tell logic that bar 1 starts at 1:06:27:05 and start writing. Both logics TC & The window burn TC match perfectly. When I bounce, I choose my bars and bounce as a "wave," which creates a file with time code stamped. I verify this by looking at the file in the audio window, which shows a clock icon, as well as the specific smpte time code if you select the file before importing into the audio bin.
From here, how do I get logic to automatically place the audio files according to their time code? I've tried "import audio" directly into the arrange page as well as dragging the file over from the audio bin and neither work. I've also tried then "cutting" these and "paste at original position" hoping it would read the time code, but instead just pastes it where it was originally imported, not according to the time code.
So I'm stumped! What am I doing wrong?
thanks in advance for your help!Highlight the regions and then from the audio menu select "move regions to original record positions"
-
Selection of Folder/File name using the same Fun.Module
Please let me know if there is a function module which can fetch folder name/File name from the directory path when f4 option of selection screen field is selected. Currently I am able to get the file name using FM F4_DXFILENAME_4_DYNP but the requirment is like I have to select either folder name or the file name depending on user selection.
Note: Please let me know if there is a single Function module which can get folder name or the file name based on the user selection.i.e, if the user want to select a folder he can select or he can select files in the folder for processingHi sridhar
try this:
PARAMETER : TXT_FILE(100).
AT SELECTION-SCREEN ON VALUE-REQUEST FOR TXT_FILE.
PERFORM GETFILE.
start-of-selection.
PERFORM GETDATA.
FORM GETDATA.
DATA : FILENAME TYPE STRING.
FILENAME = TXT_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = FILENAME
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
HEADER_LENGTH = 0
READ_BY_LINE = 'X'
DAT_MODE = ' '
CODEPAGE = ' '
IGNORE_CERR = ABAP_TRUE
REPLACEMENT = '#'
CHECK_BOM = ' '
IMPORTING
FILELENGTH =
HEADER =
TABLES
DATA_TAB = IT_UPLOAD
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
FORM GETFILE.
CALL FUNCTION 'WS_FILENAME_GET'
EXPORTING
DEF_FILENAME = ' '
DEF_PATH = '.'
MASK = ' '
MODE = ' '
TITLE = ' '
IMPORTING
FILENAME = TXT_FILE
RC =
EXCEPTIONS
INV_WINSYS = 1
NO_BATCH = 2
SELECTION_CANCEL = 3
SELECTION_ERROR = 4
OTHERS = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
<b>This is a part of my BDC program its working for me u try n reply if it works for u.</b>
regards
vijay -
How to rename the SharePoint Document Library existing file name using Web service
Hi,
How to rename the SharePoint Document Library existing file name using SharePoint Web service.
Is it possible. How could i do it?
Thanks & Regards
Poomani SankaranHi,
Lists.UpdateListItems Method
would be helpful for your requirement.
Here is a blog with code demo for your reference:
http://blogs.msdn.com/b/knowledgecast/archive/2009/05/20/moss-using-the-list-web-service-to-rename-a-file.aspx
Best regards,
Patrick
Patrick Liang
TechNet Community Support -
How to find the File name using the FTP Adapter
hi all,
how to find the File name using the FTP Adapter with BPEL.
RegardsFound the solution for this.
First In the mediator's routing rule use assign property $in.property.jca.file.FileName to $out.property.jca.file.FileName
In the BPEL's receive activity go to the properties tab and get the property to a BPEL variable. That should do it.
Thanks for the posts -
How to get file name using File adapter Sync read
Hi All,
I am using SOA 10.1.3.3 and JDEV 10.1.3.3.
I have an async bpel process.
I have to read file name in this process... so i have used file adapter sync read operation.
How can we get the file name with out payload using sync read.
For normal read (Inbound Spec)we have UseHeaders="true" property.
Is there any property for sync read to read the file name.
Please help me
Regards
PavanKumar.M
Edited by: [email protected] on Oct 27, 2009 11:23 PMHi Eric,
The info in the link provided by you is for a normal read.
I need to read he file name using Sync read operation.
Regards
PavanKumar.M -
Hoe to logical file name using "FILE" transcation
I want to create a logical file name using "FILE" transaction , i have file path '/xfer/OUT/IDD0230 ' that cureently hard coded in program but i want to avoid hard code .
You need to go to FILE transction, create new entry.
You need to specify Physical name i.e value hardcoded in your program
and corresponding new Logical Path which enduser will be entering.
In code u ned to decode Logical path to physical path as its actual path.
Award points if helpful.
Shital -
Append file name using FileSelectPopup under Windows 7
Hi,
I saw the following thread for the same issue in Vista, just wanted to make sure that this issue has been fixed for Windows 7 also before I upgrade to the latest version.
http://forums.ni.com/t5/LabWindows-CVI/Append-file-name-using-FileSelectPopup-under-Windows-VISTA/m-...
Thanks,
Karthik
Solved!
Go to Solution.Hi,
I ran across that issue when I was running applications built under CVI 7.1.1 on Windows 7. I can verify that rebuilding the application under CVI 2009 SP1 and later CVI 2010 fixed the issue. So you should be ok. -
Extract date/time stamp and modifier name from memo field
I need to extract all date/time stamps and modifier name strings from the Work Log memo field - or conversely, filter out all of the comments after the date/time modifier strings. I have the string extract but it only extracts the first one. I need to loop until all are found - how can I do this? The memo field will look something like this:
3/5/2009 3:32:05 PM John Doe
Comments - string can be any length
3/4/2009 12:35:43 PM John Doe
Comments - string can be any length
3/4/2009 12:28:17 PM Jane Dough
Comments - string can be any length and include date format 2009-06-04 14:20 CST.
3/4/2009 12:27:47 PM Mary HadaliddleLam
Comments - string can be any length
3/4/2009 12:26:55 PM Lamseedivy
Comments - string can be any length
3/4/2009 12:15:22 PM Mareseedoes
Comments - string can be any length.Here is a formula that will strip all 'comment' and blank lines and puts the datetime stamp and user names into an array. You have to manipulate the elements of the array to further separate the datetime stamp and user name if required.
// Declare two indices
numbervar i := 1;
numbervar j := 1;
// Split each row of the memo field into an array
// if chr(10) does not work then try with chrw(13) or chr(13)
stringvar array x := split({Sheet1_.Comments},chr(10));
// Declare a holding array
stringvar array y;
// Declare the size of the new array to be equal to the elements in array 1
redim y[ubound(x)];
// Copy only if the first word of each element of array 1 is neither "comments" nor a blank line
for i := 1 to ubound(x) do
if split(x<i>) = 'comments' or x<i> = '' then
else
(y[j] := x<i>;
j := j + 1;
// Compress the new array to eliminate the last blank element
redim preserve y[j-1];
// Joining the elements of the new array and the number of elements for display
join(y,chrw(13)) & chrw(13) & ubound(y);
With your example, this formula will return:
3/5/2009 3:32:05 PM John Doe
3/4/2009 12:35:43 PM John Doe
3/4/2009 12:28:17 PM Jane Dough
3/4/2009 12:27:47 PM Mary HadaliddleLam
3/4/2009 12:26:55 PM Lamseedivy
3/4/2009 12:15:22 PM Mareseedoes
6.00
Make sure the "can grow" option is checked to display the results and also check for case sensitivity of "comments".
Edited by: Sanjay Kodidine on Jun 30, 2009 10:13 AM
Maybe you are looking for
-
Dual monitor setting on PXI 8108
there is only one DVI port in PXI8108, how can I set up dual monitors? Best, Sam
-
Error installing/previewing 7.0 theme on 9370 with modified theme builder 6.0
I've upgraded a 9330 running 6.0 using a 5.0 theme (custom layout) successfully, but need to get the same theme to export for use on the 9370 running 7.0. Verizon is the carrier... Since the phones share the same resolution the theme should work on t
-
yes, when I pressed enter, the horizontal "tube" never quite filled up, if you know what I mean! I didn't recognise this format & it was taken so long (minutes) I thought it was fraudulent . . was I right or wrong???
-
My movies are type MPEG-2 I can't import my movies to work on them. They are coming from a external hard drive, not directly from the camera, its type mpeg-2 (.mts) What can I do ?
-
I am really stymied by this. I normally have my Epson R200 connected to my Windows 2003 server and I print to it from my iMac via Windows sharing. The result is the drivers from the iMac are the GIMP drivers not the native R200 drivers. This results