Trouble w/ Disabled MC
I am able to disable a movie clip that is being treated as a
button on the timeline. However it doesn't finish playing the
onRollOut animation once the script is in place. I tried an if
statement but it isn't working. Anyone know a workaround or proper
way of writing the code? The site and can be viewed at
www.jasonburnam.com
Jeff,
Your situation does not even remotely resemble the original problem posted in this thread. But that's okay.
I recommend that you take a look at some of the how-tos at: http://otn.oracle.com/products/database/htmldb/howtos/index.html, download and go through the HTML DB User Guide (http://download-west.oracle.com/docs/cd/B13789_01/appdev.101/b10992/toc.htm) , and most importantly, request a workspace on our hosted site (htmldb.oracle.com). Then if you have a particular problem with your application, we can look at it directly and offer help. It's much more efficient than using the forum to communicate all the details of how your application is built, what's not working, etc.
Scott
Similar Messages
-
Trouble removing disabled jobs from oracle scheduler.
Hi,
When I run the query :-
select job_name,job_subname,program_name,enabled,auto_drop,state
from all_SCHEDULER_JOBS
where enabled = 'FALSE'
and state = 'RUNNING'
I get the following results :-
job_name job_subname program_name enabled auto_drop state
DAILY_LOAD STEP30 EQUIP_STATUS_EXECUTE_SCRIPT FALSE TRUE RUNNING
WEEKLY_CHAIN_IMMEDIATE_JOB STEP30_1 MONITOR_EXECUTE_SCRIPT FALSE TRUE RUNNING
There are no entries on the 'ALL_SCHEDULER_RUNNING_CHAINS' table for these jobs.
How can I remove these jobs that are not disabled but have a state of 'running'.Hi DomBrooks,
When I try :-
begin
dbms_scheduler.stop_job(
'WEEKLY_CHAIN_IMMEDIATE_JOB',
TRUE
end;
I get :-
ORA-27475: "XXXXX.WEEKLY_CHAIN_IMMEDIATE_JOB" must be a job
ORA-06512: at "SYS.DBMS_ISCHED", line 164
ORA-06512: at "SYS.DBMS_SCHEDULER", line 483
ORA-06512: at line 2
I get the same when I try :-
BEGIN
DBMS_SCHEDULER.DROP_JOB (
job_name => 'WEEKLY_CHAIN_IMMEDIATE_JOB');
END;
When I try :-
select job, log_user, what from user_jobs;
I get no rows returned.
From what I can tell it seems the oracle scheduler does not think the job exist even though it shows up as 'disabled' in the all_scheduler_jobs query.
I am wondering if a db recycle might fix the problem or if you have any other ideas?
I really appreciate your help. -
ipad is disabled - trying to connect to computer (itunes) get the following message - could not connect to ipad unknown error oxe8000001????
Try and force iPad into Recovery Mode
1. Turn off iPad
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to iPad
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected an iPad in recovery mode"
8. Use iTune to restore iPad
Note: You need to be patient and repeat the above many times. -
I believe I am experiencing the problems discussed in this article: http://www.macnn.com/articles/14/11/04/several.support.threads.discussing.issue. related.to.gpu.switching/
However I am not sure. I am not that tech savvy... Anyway my computer is becoming unusable. Its truly driving me crazy. Its worth noting that I would have this problem OCCASIONALLY while running Mavericks, since the update it has become far me frequent: Computer Restarts shows message "you computer has restarted because of a problem" or sometimes my screen just goes black, the sound still plays. Pasted below is the error report. Can anyone tell me, do I have the common problem as discussed in the article or something else? I have had this machine for about 18 months, already had to replace the SSD, now this. It looks like I maybe on my way to having a $3k paperweight. Please help!
Anonymous UUID: BE42D0F0-B5F9-BC04-6475-B64036043957
Thu Nov 13 00:02:31 2014
*** Panic Report ***
panic(cpu 0 caller 0xffffff7fa5e90f63): "GPU Panic: [<None>] 5 0 a0 d9 9 8 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0x104000000 0xffffff8212ed8000 0x0e7150a2, D0, P1/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.7.21/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 0), Frame : Return Address
0xffffff820ec22a30 : 0xffffff802333a811
0xffffff820ec22ab0 : 0xffffff7fa5e90f63
0xffffff820ec22b90 : 0xffffff7fa3fd0d28
0xffffff820ec22c50 : 0xffffff7fa409b1b6
0xffffff820ec22c90 : 0xffffff7fa409b226
0xffffff820ec22d00 : 0xffffff7fa42d2d7e
0xffffff820ec22d90 : 0xffffff7fa42ea50b
0xffffff820ec22dd0 : 0xffffff7fa4113a13
0xffffff820ec22e00 : 0xffffff7fa411399d
0xffffff820ec22e30 : 0xffffff7fa4221c9f
0xffffff820ec22e60 : 0xffffff7fa4223971
0xffffff820ec22f00 : 0xffffff7fa4223f38
0xffffff820ec22f80 : 0xffffff7fa3fe5bbf
0xffffff820ec22fd0 : 0xffffff7fa422806a
0xffffff820ec23130 : 0xffffff7fa42285fa
0xffffff820ec231b0 : 0xffffff7fa40d2bee
0xffffff820ec23380 : 0xffffff7fa40d178f
0xffffff820ec233c0 : 0xffffff7fa40e18f8
0xffffff820ec23420 : 0xffffff7fa40e257b
0xffffff820ec234e0 : 0xffffff7fa3fbb807
0xffffff820ec23510 : 0xffffff7fa3fbaf09
0xffffff820ec23530 : 0xffffff7fa3fbb894
0xffffff820ec23570 : 0xffffff7fa3fbad5f
0xffffff820ec23610 : 0xffffff7fa3fad2d5
0xffffff820ec236b0 : 0xffffff7fa3fd53a5
0xffffff820ec238b0 : 0xffffff7fa3fd638c
0xffffff820ec23990 : 0xffffff7fa41775fc
0xffffff820ec239e0 : 0xffffff7fa4177c80
0xffffff820ec23a90 : 0xffffff7fa416be63
0xffffff820ec23c60 : 0xffffff7fa3f8278b
0xffffff820ec23cf0 : 0xffffff7fa3f6bfc4
0xffffff820ec23d70 : 0xffffff7fa3f6ef9a
0xffffff820ec23db0 : 0xffffff7fa3f6e816
0xffffff820ec23e20 : 0xffffff7fa3f3381f
0xffffff820ec23e60 : 0xffffff7fa3f32b50
0xffffff820ec23e90 : 0xffffff7fa3f2ed33
0xffffff820ec23ef0 : 0xffffff80238d7162
0xffffff820ec23f40 : 0xffffff80238d507d
0xffffff820ec23f80 : 0xffffff80238d5146
0xffffff820ec23fb0 : 0xffffff80234192c7
Kernel Extensions in backtrace:
com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7fa3f6a000->0xffffff7fa3f79fff
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa3f23000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
com.apple.driver.AppleMuxControl(3.7.21)[32B7E2DE-1F9D-3555-B687-7A76A62B81D2]@ 0xffffff7fa5e82000->0xffffff7fa5e95fff
dependency: com.apple.driver.AppleGraphicsControl(3.7.21)[62689710-EEA7-307A-AC83-B8F25DA88 A6A]@0xffffff7fa5e7a000
dependency: com.apple.iokit.IOACPIFamily(1.4)[70E2B65E-A91A-3522-A1A0-79FD63EABB4C]@0xfffff f7fa4801000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa3f23000
dependency: com.apple.driver.AppleBacklightExpert(1.1.0)[0183904C-6A16-32C4-9405-EEFD7F820B 02]@0xffffff7fa5e7d000
com.apple.nvidia.driver.NVDAResman(10.0)[53CC0E05-7382-336C-8239-AE884D6CA71A]@ 0xffffff7fa3f80000->0xffffff7fa41f5fff
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[F4738C55-B507-3627-A9CA-3D29A5230A03]@0xff ffff7fa3f6a000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[6D99A3BE-D531-3780-880B-13F2FC894A4A]@0 xffffff7fa3f23000
dependency: com.apple.AppleGraphicsDeviceControl(3.7.21)[4700601D-3FEB-3B86-B2BA-8D71AF84D1 C4]@0xffffff7fa3f7a000
com.apple.nvidia.driver.NVDAGK100Hal(10.0)[DC43029D-568A-3B7C-976B-E922C17F5143 ]@0xffffff7fa4201000->0xffffff7fa43aefff
dependency: com.apple.nvidia.driver.NVDAResman(10.0.0)[53CC0E05-7382-336C-8239-AE884D6CA71A ]@0xffffff7fa3f80000
dependency: com.apple.iokit.IOPCIFamily(2.9)[766FC23F-452C-3B74-951C-598BB17BCF06]@0xffffff 7fa3b24000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
14A389
Kernel version:
Darwin Kernel Version 14.0.0: Fri Sep 19 00:26:44 PDT 2014; root:xnu-2782.1.97~2/RELEASE_X86_64
Kernel UUID: 89E10306-BC78-3A3B-955C-7C4922577E61
Kernel slide: 0x0000000023000000
Kernel text base: 0xffffff8023200000
__HIB text base: 0xffffff8023100000
System model name: MacBookPro10,1 (Mac-C3EC7CD22292981F)
System uptime in nanoseconds: 242886238000
last loaded kext at 7305506356: com.apple.driver.AppleGraphicsDevicePolicy 3.7.7 (addr 0xffffff7fa5e9e000, size 45056)
last unloaded kext at 104051108832: com.apple.iokit.IOEthernetAVBController 1.0.3b3 (addr 0xffffff7fa4883000, size 28672)
loaded kexts:
com.avatron.AVExFramebuffer 1.7
com.parallels.virtualsound 1.0.27 27
com.avatron.AVExVideo 1.7
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.driver.AGPM 100.14.37
com.apple.driver.ApplePlatformEnabler 2.1.0d1
com.apple.driver.X86PlatformShim 1.0.0
com.apple.driver.AudioAUUC 1.70
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOBluetoothSerialManager 4.3.0f10
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.AppleOSXWatchdog 1
com.apple.driver.AppleMikeyDriver 266.5
com.apple.driver.AppleHDA 266.5
com.apple.driver.AppleUpstreamUserClient 3.6.1
com.apple.GeForce 10.0.0
com.apple.iokit.IOUserEthernet 1.0.1
com.apple.driver.AppleThunderboltIP 2.0.2
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.driver.AppleIntelHD4000Graphics 10.0.0
com.apple.driver.AppleLPC 1.7.3
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.AppleMuxControl 3.7.21
com.apple.driver.AppleMCCSControl 1.2.10
com.apple.driver.AppleHWAccess 1
com.apple.driver.AppleHV 1
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.AppleIntelFramebufferCapri 10.0.0
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.iokit.IOAHCIBlockStorage 2.6.5
com.apple.driver.AppleUSBHub 705.4.1
com.apple.driver.AppleSDXC 1.6.5
com.apple.driver.AirPort.Brcm4360 900.19.8
com.apple.driver.AppleAHCIPort 3.0.7
com.apple.driver.AppleUSBEHCI 705.4.14
com.apple.driver.AppleUSBXHCI 705.4.14
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 3.1
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 3.1
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0
com.apple.nke.applicationfirewall 161
com.apple.security.quarantine 3
com.apple.security.TMSafetyNet 8
com.apple.driver.AppleIntelCPUPowerManagement 218.0.0
com.apple.kext.triggers 1.0
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.0f10
com.apple.iokit.IOSerialFamily 11
com.apple.driver.DspFuncLib 266.5
com.apple.kext.OSvKernDSPLib 1.15
com.apple.iokit.IOAudioFamily 200.6
com.apple.vecLib.kext 1.2.0
com.apple.nvidia.driver.NVDAGK100Hal 10.0.0
com.apple.nvidia.driver.NVDAResman 10.0.0
com.apple.iokit.IOBluetoothFamily 4.3.0f10
com.apple.iokit.IOSurface 97
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.driver.AppleBacklightExpert 1.1.0
com.apple.driver.AppleGraphicsControl 3.7.21
com.apple.driver.X86PlatformPlugin 1.0.0
com.apple.driver.AppleSMBusController 1.0.13d1
com.apple.driver.AppleSMC 3.1.9
com.apple.driver.AppleHDAController 266.5
com.apple.iokit.IOHDAFamily 266.5
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.IOPlatformPluginFamily 5.8.0d49
com.apple.iokit.IOAcceleratorFamily2 156.4
com.apple.AppleGraphicsDeviceControl 3.7.21
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.iokit.IOUSBUserClient 705.4.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.0
com.apple.driver.AppleUSBMultitouch 245.2
com.apple.iokit.IOUSBHIDDriver 705.4.0
com.apple.driver.AppleUSBMergeNub 705.4.0
com.apple.driver.AppleUSBComposite 705.4.9
com.apple.driver.CoreStorage 471
com.apple.driver.AppleThunderboltDPInAdapter 4.0.6
com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6
com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2
com.apple.driver.AppleThunderboltNHI 3.1.7
com.apple.iokit.IOThunderboltFamily 4.2.1
com.apple.iokit.IO80211Family 700.52
com.apple.driver.mDNSOffloadUserClient 1.0.1b8
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.7.0
com.apple.iokit.IOUSBFamily 705.4.14
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 300.0
com.apple.kext.AppleMatch 1.0.0d1
com.apple.driver.AppleKeyStore 2
com.apple.driver.AppleMobileFileIntegrity 1.0.5
com.apple.driver.AppleCredentialManager 1.0
com.apple.driver.DiskImages 389.1
com.apple.iokit.IOStorageFamily 2.0
com.apple.iokit.IOReportFamily 31
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 3.1
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.corecrypto 1.0
com.apple.kec.Libm 1
com.apple.kec.pthread 1
Model: MacBookPro10,1, BootROM MBP101.00EE.B05, 4 processors, Intel Core i7, 2.3 GHz, 16 GB, SMC 2.3f36
Graphics: Intel HD Graphics 4000, Intel HD Graphics 4000, Built-In
Memory Module: BANK 0/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
Memory Module: BANK 1/DIMM0, 8 GB, DDR3, 1600 MHz, 0x80AD, 0x484D5434314753364D465238432D50422020
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0xEF), Broadcom BCM43xx 1.0 (7.15.124.12.8)
Bluetooth: Version 4.3.0f10 14890, 3 services, 19 devices, 1 incoming serial ports
Network Service: Wi-Fi, AirPort, en0
Serial ATA Device: OWC Aura Pro rMBP, 480.1 GB
USB Device: Hub
USB Device: FaceTime HD Camera (Built-in)
USB Device: Hub
USB Device: Hub
USB Device: BRCM20702 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Apple Internal Keyboard / Trackpad
Thunderbolt Bus: MacBook Pro, Apple Inc., 23.4Remove "Air Display" and see whether there's any change. If not, the logic board is faulty and must be replaced.
Any third-party software that doesn't install by drag-and-drop into the Applications folder, and uninstall by drag-and-drop to the Trash, is a system modification.
Whenever you remove system modifications, they must be removed completely, and the only way to do that is to use the uninstallation tool, if any, provided by the developers, or to follow their instructions. If the software has been incompletely removed, you may have to re-download or even reinstall it in order to finish the job.
I never install system modifications myself, and except as stated in this comment, I don't know how to uninstall them. You'll have to do your own research to find that information.
Here are some general guidelines to get you started. Suppose you want to remove something called “BrickMyMac” (a hypothetical example.) First, consult the product's Help menu, if there is one, for instructions. Finding none there, look on the developer's website, say www.brickmymac.com. (That may not be the actual name of the site; if necessary, search the Web for the product name.) If you don’t find anything on the website or in your search, contact the developer. While you're waiting for a response, download BrickMyMac.dmg and open it. There may be an application in there such as “Uninstall BrickMyMac.” If not, open “BrickMyMac.pkg” and look for an Uninstall button. The uninstaller might also be accessed by clicking the Customize button, if there is one.
Back up all data before making any changes.
You will generally have to restart the computer in order to complete an uninstallation. Until you do that, there may be no effect, or unpredictable effects.
If you can’t remove software in any other way, you’ll have to erase and install OS X. Never install any third-party software unless you're sure you know how to uninstall it; otherwise you may create problems that are very hard to solve.
Trying to remove complex system modifications by hunting for files by name often will not work and may make the problem worse. The same goes for "utilities" such as "AppCleaner" and the like that purport to remove software. -
Tree control: How to disable the selection of a child item
Hello everyone,
Im having trouble with disabling the selection of a child item in a tree control. I dont know if its possible but havent found any answers on this forum regarding this issue.
Example:
Parent tag 1
child item 1
child item 2
Parent tag 2
child item a
child item b
What i would like to do is being able to select the parent tags but not the child items, because i use the name of the selected item in my program to determine which actions are allowed and those that are not. To avoid this problem i look at the first 4 letters of the name and this way i can determine if it is a parent tag or child item and take appropriate action. Im able to do this because the parent tags have fixed names. But even though nothing happens in software if i select a child item it still lights up, so for the user of the program it looks as if the child items is selected but the program doesnt do anything(because i made it that way). Thats why i want to be able to disable the selection of the child item or at least make the selection colour of the child item transparant so it doesnt look like it is selected.
Can anyone help me with this problem, if there are parts of my question you dont understand, just ask.
greetz
Ynse.Muks,
your last image disables the whole tree.
To programmatically disables an item use ActiveItem.Disabled? property.
Unfortunately this only has two states, Enabled and disabled (thus grayed).
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be! -
Issue with spamassassin, now mail not working
Hi ! I installed spamtrainer almost two months ago. Been feeding the [email protected] for several weeks now , 700 emails each day at least .
There was very little improvement if none at all. Tried to add "@local_domains_maps = (1)" to amavisd.conf last night thinking it might be the problem , though no virtual domain exist. This was one of the issue on the default Amavisd config. The other one is adding the symbolic link which I already done.
Computer froze while adding the parameter "@local_domains_maps = (1)", so I manually turn off the Power Mac, then mail stopped altogether. The mails are filing up but the clients couldn't send or receive since this incidence .
FF is the maincf. and amavis.conf
All help are greatly appreciated.
mail:/Users/sysadmin root# postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
html_directory = no
inet_interfaces = all
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 31457280
mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
mydomain = cpplaw.com
mydomain_fallback = localhost
myhostname = mail.cpplaw.com
mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_client_restrictions = permit_mynetworks permit
smtpd_tls_key_file =
unknown_local_recipient_reject_code = 550
virtual_mailbox_domains =
virtual_transport = virtual
mail:/Users/sysadmin root# postconf -n
alias_maps = hash:/etc/aliases,hash:/var/mailman/data/aliases
always_bcc =
command_directory = /usr/sbin
config_directory = /etc/postfix
content_filter = smtp-amavis:[127.0.0.1]:10024
daemon_directory = /usr/libexec/postfix
debug_peer_level = 2
enable_server_options = yes
html_directory = no
inet_interfaces = all
local_recipient_maps = proxy:unix:passwd.byname $alias_maps
luser_relay =
mail_owner = postfix
mailbox_size_limit = 0
mailbox_transport = cyrus
mailq_path = /usr/bin/mailq
manpage_directory = /usr/share/man
maps_rbl_domains =
message_size_limit = 31457280
mydestination = $myhostname,localhost.$mydomain,localhost,mail.cpplaw.com,cpplaw.com
mydomain = cpplaw.com
mydomain_fallback = localhost
myhostname = mail.cpplaw.com
mynetworks = 127.0.0.1/32,192.168.1.0/24,127.0.0.1
mynetworks_style = host
newaliases_path = /usr/bin/newaliases
owner_request_special = no
queue_directory = /private/var/spool/postfix
readme_directory = /usr/share/doc/postfix
recipient_delimiter = +
relayhost =
sample_directory = /usr/share/doc/postfix/examples
sendmail_path = /usr/sbin/sendmail
setgid_group = postdrop
smtpd_client_restrictions = permit_mynetworks permit
smtpd_tls_key_file =
unknown_local_recipient_reject_code = 550
virtual_mailbox_domains =
virtual_transport = virtual
mail:/Users/sysadmin root#
_______________________Amavisd.cof_________________________
use strict;
# Configuration file for amavisd-new
# This software is licensed under the GNU General Public License (GPL).
# See comments at the start of amavisd-new for the whole license text.
#Sections:
# Section I - Essential daemon and MTA settings
# Section II - MTA specific
# Section III - Logging
# Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
# Section V - Per-recipient and per-sender handling, whitelisting, etc.
# Section VI - Resource limits
# Section VII - External programs, virus scanners, SpamAssassin
# Section VIII - Debugging
#GENERAL NOTES:
# This file is a normal Perl code, interpreted by Perl itself.
# - make sure this file (or directory where it resides) is NOT WRITABLE
# by mere mortals, otherwise it represents a severe security risk!
# - for values which are interpreted as booleans, it is recommended
# to use 1 for true, and 0 or undef or '' for false.
# THIS IS DIFFERENT FROM OLDER AMAVIS VERSIONS where "no" also meant false,
# now it means true, like any nonempty string does!
# - Perl syntax applies. Most notably: strings in "" may include variables
# (which start with $ or @); to include characters @ and $ in double
# quoted strings, precede them by a backslash; in single-quoted strings
# the $ and @ lose their special meaning, so it is usually easier to use
# single quoted strings. Still, in both cases a backslash need to be doubled
# - variables with names starting with a '@' are lists, the values assigned
# to them should be lists as well, e.g. ('one@foo', $mydomain, "three");
# note the comma-separation and parenthesis. If strings in the list
# do not contain spaces nor variables, a Perl operator qw() may be used
# as a shorthand to split its argument on whitespace and produce a list
# of strings, e.g. qw( one@foo example.com three ); Note that the argument
# to qw is quoted implicitly and no variable interpretation is done within
# (no '$' variable evaluations). The #-initiated comments can not be used
# within the string. In other words, $ and # lose their special meaning
# withing a qw argument, just like within '...' strings.
# - all e-mail addresses in this file and as used internally by the daemon
# are in their raw (rfc2821-unquoted and nonbracketed) form, i.e.
# Bob "Funny" [email protected], not: "Bob \"Funny\" Dude"@example.com
# and not <"@example.com>; also: '' and not ''.
# Section I - Essential daemon and MTA settings
# $MYHOME serves as a quick default for some other configuration settings.
# More refined control is available with each individual setting further down.
# $MYHOME is not used directly by the program. No trailing slash!
#$MYHOME = '/var/lib/amavis'; # (default is '/var/amavis')
# : $mydomain serves as a quick default for some other configuration settings.
# : More refined control is available with each individual setting further down.
# : $mydomain is never used directly by the program.
$mydomain = 'cpplaw.com'; aol.com'; # (no useful default)
# Set the user and group to which the daemon will change if started as root
# (otherwise just keep the UID unchanged, and these settings have no effect):
$daemon_user = 'clamav'; # (no default; customary: vscan or amavis)
$daemon_group = 'clamav'; # (no default; customary: vscan or amavis)
# Runtime working directory (cwd), and a place where
# temporary directories for unpacking mail are created.
# (no trailing slash, may be a scratch file system)
$TEMPBASE = $MYHOME; # (must be set if other config vars use is)
#$TEMPBASE = "$MYHOME/tmp"; # prefer to keep home dir /var/amavis clean?
# $helpers_home sets environment variable HOME, and is passed as option
# 'home_dir_for_helpers' to Mail::SpamAssassin::new. It should be a directory
# on a normal persistent file system, not a scratch or temporary file system
#$helpers_home = $MYHOME; # (defaults to $MYHOME)
#$daemon_chroot_dir = $MYHOME; # (default is undef, meaning: do not chroot)
#$pid_file = "$MYHOME/amavisd.pid"; # (default is "$MYHOME/amavisd.pid")
#$lock_file = "$MYHOME/amavisd.lock"; # (default is "$MYHOME/amavisd.lock")
# set environment variables if you want (no defaults):
$ENV{TMPDIR} = $TEMPBASE; # wise, but usually not necessary
# MTA SETTINGS, UNCOMMENT AS APPROPRIATE,
# both $forward_method and $notify_method default to 'smtp:127.0.0.1:10025'
# POSTFIX, or SENDMAIL in dual-MTA setup, or EXIM V4
# (set host and port number as required; host can be specified
# as IP address or DNS name (A or CNAME, but MX is ignored)
#$forward_method = 'smtp:127.0.0.1:10025'; # where to forward checked mail
#$notify_method = $forward_method; # where to submit notifications
# NOTE: The defaults (above) are good for Postfix or dual-sendmail. You MUST
# uncomment the approprate settings below if using other setups!
# SENDMAIL MILTER, using amavis-milter.c helper program:
#$forward_method = undef; # no explicit forwarding, sendmail does it by itself
# milter; option -odd is needed to avoid deadlocks
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -odd -f ${sender} -- ${recipient}';
# just a thought: can we use use -Am instead of -odd ?
# SENDMAIL (old non-milter setup, as relay):
#$forward_method = 'pipe:flags=q argv=/usr/sbin/sendmail -C/etc/sendmail.orig.cf -i -f ${sender} -- ${recipient}';
#$notify_method = $forward_method;
# SENDMAIL (old non-milter setup, amavis.c calls local delivery agent):
#$forward_method = undef; # no explicit forwarding, amavis.c will call LDA
#$notify_method = 'pipe:flags=q argv=/usr/sbin/sendmail -Ac -i -f ${sender} -- ${recipient}';
# EXIM v3 (not recommended with v4 or later, which can use SMTP setup instead):
#$forward_method = 'pipe:flags=q argv=/usr/sbin/exim -oMr scanned-ok -i -f ${sender} -- ${recipient}';
#$notify_method = $forward_method;
# prefer to collect mail for forwarding as BSMTP files?
#$forward_method = "bsmtp:$MYHOME/out-%i-%n.bsmtp";
#$notify_method = $forward_method;
# Net::Server pre-forking settings
# You may want $max_servers to match the width of your MTA pipe
# feeding amavisd, e.g. with Postfix the 'Max procs' field in the
# master.cf file, like the '2' in the: smtp-amavis unix - - n - 2 smtp
$max_servers = 2; # number of pre-forked children (default 2)
$max_requests = 10; # retire a child after that many accepts (default 10)
$child_timeout=5*60; # abort child if it does not complete each task in n sec
# (default: 8*60 seconds)
# Check also the settings of @av_scanners at the end if you want to use
# virus scanners. If not, you may want to delete the whole long assignment
# to the variable @av_scanners, which will also remove the virus checking
# code (e.g. if you only want to do spam scanning).
# Here is a QUICK WAY to completely DISABLE some sections of code
# that WE DO NOT WANT (it won't even be compiled-in).
# For more refined controls leave the following two lines commented out,
# and see further down what these two lookup lists really mean.
#@bypass_virus_checks_acl = qw( . ); # uncomment to DISABLE anti-virus code
#@bypass_spam_checks_acl = qw( . ); # uncomment to DISABLE anti-spam code
# Any setting can be changed with a new assignment, so make sure
# you do not unintentionally override these settings further down!
# Lookup list of local domains (see README.lookups for syntax details)
# NOTE:
# For backwards compatibility the variable names @local_domains (old) and
# @local_domains_acl (new) are synonyms. For consistency with other lookups
# the name @local_domains_acl is now preferred. It also makes it more
# obviously distinct from the new %local_domains hash lookup table.
# local_domains* lookup tables are used in deciding whether a recipient
# is local or not, or in other words, if the message is outgoing or not.
# This affects inserting spam-related headers for local recipients,
# limiting recipient virus notifications (if enabled) to local recipients,
# in deciding if address extension may be appended, and in SQL lookups
# for non-fqdn addresses. Set it up correctly if you need features
# that rely on this setting (or just leave empty otherwise).
# With Postfix (2.0) a quick reminder on what local domains normally are:
# a union of domains spacified in: $mydestination, $virtual_alias_domains,
# $virtual_mailbox_domains, and $relay_domains.
@local_domains_acl = ( ".$mydomain" ); # $mydomain and its subdomains
# @local_domains_acl = qw(); # default is empty, no recipient treated as local
# @local_domains_acl = qw( .example.com );
# @local_domains_acl = qw( .example.com !host.sub.example.net .sub.example.net );
# @local_domains_acl = ( ".$mydomain", '.example.com', 'sub.example.net' );
# or alternatively(A), using a Perl hash lookup table, which may be assigned
# directly, or read from a file, one domain per line; comments and empty lines
# are ignored, a dot before a domain name implies its subdomains:
#read_hash(\%local_domains, '/var/amavis/local_domains');
#or alternatively(B), using a list of regular expressions:
# $local_domains_re = new_RE( qr'[@.]example\.com$'i );
# see README.lookups for syntax and semantics
# Section II - MTA specific (defaults should be ok)
# if $relayhost_is_client is true, IP address in $notify_method and
# $forward_method is dynamically overridden with SMTP client peer address
# if available, which makes possible for several hosts to share one daemon
#$relayhost_is_client = 1; # (defaults to false)
#$insert_received_line = 1; # behave like MTA: insert 'Received:' header
# (does not apply to sendmail/milter)
# (default is true)
# AMAVIS-CLIENT PROTOCOL INPUT SETTINGS (e.g. with sendmail milter)
# (used with amavis helper clients like amavis-milter.c and amavis.c,
# NOT needed for Postfix and Exim)
$unix_socketname = "$MYHOME/amavisd.sock"; # amavis helper protocol socket
#$unix_socketname = undef; # disable listening on a unix socket
# (default is undef, i.e. disabled)
# (usual setting is $MYHOME/amavisd.sock)
# Do we receive quoted or raw addresses from the helper program?
# (does not apply to SMTP; defaults to true)
#$gets_addr_in_quoted_form = 1; # "Bob \"Funny\" Dude"@example.com
#$gets_addr_in_quoted_form = 0; # Bob "Funny" [email protected]
# SMTP SERVER (INPUT) PROTOCOL SETTINGS (e.g. with Postfix, Exim v4, ...)
# (used when MTA is configured to pass mail to amavisd via SMTP or LMTP)
$inet_socket_port = 10024; # accept SMTP on this local TCP port
# (default is undef, i.e. disabled)
# multiple ports may be provided: $inet_socket_port = [10024, 10026, 10028];
# SMTP SERVER (INPUT) access control
# - do not allow free access to the amavisd SMTP port !!!
# when MTA is at the same host, use the following (one or the other or both):
#$inet_socket_bind = '127.0.0.1'; # limit socket bind to loopback interface
# (default is '127.0.0.1')
@inet_acl = qw( 127.0.0.1 ); # allow SMTP access only from localhost IP
# (default is qw( 127.0.0.1 ) )
# when MTA (one or more) is on a different host, use the following:
#@inet_acl = qw(127/8 10.1.0.1 10.1.0.2); # adjust the list as appropriate
#$inet_socket_bind = undef; # bind to all IP interfaces
# Example1:
# @inet_acl = qw( 127/8 10/8 172.16/12 192.168/16 );
# permit only SMTP access from loopback and rfc1918 private address space
# Example2:
# @inet_acl = qw( !192.168.1.12 172.16.3.3 !172.16.3/255.255.255.0
# 127.0.0.1 10/8 172.16/12 192.168/16 );
# matches loopback and rfc1918 private address space except host 192.168.1.12
# and net 172.16.3/24 (but host 172.16.3.3 within 172.16.3/24 still matches)
# Example3:
# @inet_acl = qw( 127/8
# !172.16.3.0 !172.16.3.127 172.16.3.0/25
# !172.16.3.128 !172.16.3.255 172.16.3.128/25 );
# matches loopback and both halves of the 172.16.3/24 C-class,
# split into two subnets, except all four broadcast addresses
# for these subnets
# See README.lookups for details on specifying access control lists.
# Section III - Logging
# true (e.g. 1) => syslog; false (e.g. 0) => logging to file
$DO_SYSLOG = 0; # (defaults to false)
#$SYSLOG_LEVEL = 'user.info'; # (defaults to 'mail.info')
# Log file (if not using syslog)
$LOGFILE = "/var/log/amavis.log"; # (defaults to empty, no log)
#NOTE: levels are not strictly observed and are somewhat arbitrary
# 0: startup/exit/failure messages, viruses detected
# 1: args passed from client, some more interesting messages
# 2: virus scanner output, timing
# 3: server, client
# 4: decompose parts
# 5: more debug details
$log_level = 4; # (defaults to 0)
# Customizeable template for the most interesting log file entry (e.g. with
# $log_level=0) (take care to properly quote Perl special characters like '\')
# For a list of available macros see README.customize .
# only log infected messages (useful with log level 0):
# $log_templ = '[? %#V |[? %#F ||banned filename ([%F|,])]|infected ([%V|,])]#
# [? %#V |[? %#F ||, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]#
# |, from=<%o>, to=[<%R>|,][? %i ||, quarantine %i]]';
# log both infected and noninfected messages (default):
$log_templ = '[? %#V |[? %#F |[?%#D|Not-Delivered|Passed]|BANNED name/type (%F)]|INFECTED (%V)], #
<%o> -> [<%R>|,][? %i ||, quarantine %i], Message-ID: %m, Hits: %c';
# Section IV - Notifications/DSN, BOUNCE/REJECT/DROP/PASS destiny, quarantine
# Select notifications text encoding when Unicode-aware Perl is converting
# text from internal character representation to external encoding (charset
# in MIME terminology)
# to be used in RFC 2047-encoded header field bodies, e.g. in Subject:
#$hdr_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
# to be used in notification body text: its encoding and Content-type.charset
#$bdy_encoding = 'iso-8859-1'; # (default: 'iso-8859-1')
# Default template texts for notifications may be overruled by directly
# assigning new text to template variables, or by reading template text
# from files. A second argument may be specified in a call to read_text(),
# specifying character encoding layer to be used when reading from the
# external file, e.g. 'utf8', 'iso-8859-1', or often just $bdy_encoding.
# Text will be converted to internal character representation by Perl 5.8.0
# or later; second argument is ignored otherwise. See PerlIO::encoding,
# Encode::PerlIO and perluniintro man pages.
# $notify_sender_templ = read_text('/var/amavis/notify_sender.txt');
# $notify_virus_sender_templ= read_text('/var/amavis/notify_virus_sender.txt');
# $notify_virus_admin_templ = read_text('/var/amavis/notify_virus_admin.txt');
# $notify_virus_recips_templ= read_text('/var/amavis/notify_virus_recips.txt');
# $notify_spam_sender_templ = read_text('/var/amavis/notify_spam_sender.txt');
# $notify_spam_admin_templ = read_text('/var/amavis/notify_spam_admin.txt');
# If notification template files are collectively available in some directory,
# use read_l10n_templates which calls read_text for each known template.
# read_l10n_templates('/etc/amavis/en_US');
# Here is an overall picture (sequence of events) of how pieces fit together
# (only virus controls are shown, spam controls work the same way):
# bypass_virus_checks set for all recipients? ==> PASS
# no viruses? ==> PASS
# log virus if $log_templ is nonempty
# quarantine if $virus_quarantine_to is nonempty
# notify admin if $virus_admin (lookup) nonempty
# notify recips if $warnvirusrecip and (recipient is local or $warn_offsite)
# add address extensions for local recipients (when enabled)
# send (non-)delivery notifications
# to sender if DSN needed (BOUNCE) or ($warnvirussender and D_PASS)
# virus_lovers or final_destiny==D_PASS ==> PASS
# DISCARD (2xx) or REJECT (5xx) (depending on final_*_destiny)
# Equivalent flow diagram applies for spam checks.
# If a virus is detected, spam checking is skipped entirely.
# The following symbolic constants can be used in *destiny settings:
# D_PASS mail will pass to recipients, regardless of bad contents;
# D_DISCARD mail will not be delivered to its recipients, sender will NOT be
# notified. Effectively we lose mail (but will be quarantined
# unless disabled). Not a decent thing to do for a mailer.
# D_BOUNCE mail will not be delivered to its recipients, a non-delivery
# notification (bounce) will be sent to the sender by amavisd-new;
# Exception: bounce (DSN) will not be sent if a virus name matches
# $viruses_that_fake_sender_re, or to messages from mailing lists
# (Precedence: bulk|list|junk);
# D_REJECT mail will not be delivered to its recipients, sender should
# preferably get a reject, e.g. SMTP permanent reject response
# (e.g. with milter), or non-delivery notification from MTA
# (e.g. Postfix). If this is not possible (e.g. different recipients
# have different tolerances to bad mail contents and not using LMTP)
# amavisd-new sends a bounce by itself (same as D_BOUNCE).
# Notes:
# D_REJECT and D_BOUNCE are similar, the difference is in who is responsible
# for informing the sender about non-delivery, and how informative
# the notification can be (amavisd-new knows more than MTA);
# With D_REJECT, MTA may reject original SMTP, or send DSN (delivery status
# notification, colloquially called 'bounce') - depending on MTA;
# Best suited for sendmail milter, especially for spam.
# With D_BOUNCE, amavisd-new (not MTA) sends DSN (can better explain the
# reason for mail non-delivery, but unable to reject the original
# SMTP session). Best suited to reporting viruses, and for Postfix
# and other dual-MTA setups, which can't reject original client SMTP
# session, as the mail has already been enqueued.
$final_virus_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
$final_banned_destiny = D_BOUNCE; # (defaults to D_BOUNCE)
$final_spam_destiny = D_PASS; # (defaults to D_REJECT)
$final_bad_header_destiny = D_PASS; # (defaults to D_PASS), D_BOUNCE suggested
# Alternatives to consider for spam:
# - use D_PASS if clients will do filtering based on inserted mail headers;
# - use D_DISCARD, if kill_level is set safely high;
# - use D_BOUNCE instead of D_REJECT if not using milter;
# There are no sensible alternatives to D_BOUNCE for viruses, but consider:
# - use D_PASS (or virus_lovers) and $warnvirussender=1 to deliver viruses;
# - use D_REJECT instead of D_BOUNCE if using milter and under heavy
# virus storm;
# Don't bother to set both D_DISCARD and $warn*sender=1, it will get mapped
# to D_BOUNCE.
# The separation of *_destiny values into D_BOUNCE, D_REJECT, D_DISCARD
# and D_PASS made settings $warnvirussender and $warnspamsender only still
# useful with D_PASS.
# The following $warn*sender settings are ONLY used when mail is
# actually passed to recipients ($final_*_destiny=D_PASS, or *_lovers*).
# Bounces or rejects produce non-delivery status notification anyway.
# Notify virus sender?
#$warnvirussender = 1; # (defaults to false (undef))
# Notify spam sender?
#$warnspamsender = 1; # (defaults to false (undef))
# Notify sender of banned files?
#$warnbannedsender = 1; # (defaults to false (undef))
# Notify sender of syntactically invalid header containing non-ASCII characters?
#$warnbadhsender = 1; # (defaults to false (undef))
# Notify virus (or banned files) RECIPIENT?
# (not very useful, but some policies demand it)
#$warnvirusrecip = 1; # (defaults to false (undef))
#$warnbannedrecip = 1; # (defaults to false (undef))
# Notify also non-local virus/banned recipients if $warn*recip is true?
# (including those not matching local_domains*)
#$warn_offsite = 1; # (defaults to false (undef), i.e. only notify locals)
# Treat envelope sender address as unreliable and don't send sender
# notification / bounces if name(s) of detected virus(es) match the list.
# Note that virus names are supplied by external virus scanner(s) and are
# not standardized, so virus names may need to be adjusted.
# See README.lookups for syntax.
$viruses_that_fake_sender_re = new_RE(
qr'nimda|hybris|klez|bugbear|yaha|braid|sobig|fizzer|palyh|peido|holar'i );
# where to send ADMIN VIRUS NOTIFICATIONS (should be a fully qualified address)
# - the administrator address may be a simple fixed e-mail address (a scalar),
# or may depend on the SENDER address (e.g. its domain), in which case
# a ref to a hash table can be specified (specify lower-cased keys,
# dot is a catchall, see README.lookups).
# Empty or undef lookup disables virus admin notifications.
$virus_admin = '[email protected]';
# $virus_admin = undef; # do not send virus admin notifications (default)
# $virus_admin = {'not.example.com' => '', '.' => '[email protected]'};
# $virus_admin = '[email protected]';
# equivalent to $virus_admin, but for spam admin notifications:
#$spam_admin = '[email protected]';# $spam_admin = undef; # do not send spam admin notifications (default)
# $spam_admin = {'not.example.com' => '', '.' => '[email protected]'};
#advanced example, using a hash lookup table:
# - $virus_admin = {
# '[email protected]' => '[email protected]',
# '.sub1.example.com' => '[email protected]',
# '.sub2.example.com' => '', # don't send admin notifications
# 'a.sub3.example.com' => '[email protected]',
# '.sub3.example.com' => '[email protected]',
# '.example.com' => '[email protected]', # catchall for our virus senders
# '.' => '[email protected]', # catchall for the rest
# whom notification reports are sent from (ENVELOPE SENDER);
# may be a null reverse path, or a fully qualified address:
# (admin and recip sender addresses default to $mailfrom
# for compatibility, which in turn defaults to undef (empty) )
# If using strings in double quotes, don't forget to quote @, i.e. \@
$mailfrom_notify_admin = "virusalert\@$mydomain";
$mailfrom_notify_recip = "virusalert\@$mydomain";
$mailfrom_notify_spamadmin = "spam.police\@$mydomain";
# 'From' HEADER FIELD for sender and admin notifications.
# This should be a replyable address, see rfc1894. Not to be confused
# with $mailfrom_notify_sender, which is the envelope address and
# should be empty (null reverse path) according to rfc2821.
# $hdrfrom_notify_sender = "amavisd-new <postmaster\@$mydomain>";
# $hdrfrom_notify_sender = 'amavisd-new <[email protected]>';
# (defaults to: "amavisd-new <postmaster\@$myhostname>")
# $hdrfrom_notify_admin = $mailfrom_notify_admin;
# (defaults to: $mailfrom_notify_admin)
# $hdrfrom_notify_spamadmin = $mailfrom_notify_spamadmin;
# (defaults to: $mailfrom_notify_spamadmin)
# whom quarantined messages appear to be sent from (envelope sender)
$mailfrom_to_quarantine = undef; # original sender if undef, or set explicitly
# (default is undef)
# Location to put infected mail into: (applies to 'local:' quarantine method)
# empty for not quarantining, may be a file (mailbox),
# or a directory (no trailing slash)
# (the default value is undef, meaning no quarantine)
$QUARANTINEDIR = '/var/virusmails';
#$virus_quarantine_method = "local:virus-%i-%n"; # default
#$spam_quarantine_method = "local:spam-%b-%i-%n"; # default
#use the new 'bsmtp:' method as an alternative to the default 'local:'
#$virus_quarantine_method = "bsmtp:$QUARANTINEDIR/virus-%i-%n.bsmtp";
#$spam_quarantine_method = "bsmtp:$QUARANTINEDIR/spam-%b-%i-%n.bsmtp";
# When using the 'local:' quarantine method (default), the following applies:
# A finer control of quarantining is available through variable
# $virus_quarantine_to/$spam_quarantine_to. It may be a simple scalar string,
# or a ref to a hash lookup table, or a regexp lookup table object,
# which makes possible to set up per-recipient quarantine addresses.
# The value of scalar $virus_quarantine_to/$spam_quarantine_to (or a
# per-recipient lookup result from the hash table %$virus_quarantine_to)
# is/are interpreted as follows:
# VARIANT 1:
# empty or undef disables quarantine;
# VARIANT 2:
# a string NOT containg an '@';
# amavisd will behave as a local delivery agent (LDA) and will quarantine
# viruses to local files according to hash %local_delivery_aliases (pseudo
# aliases map) - see subroutine mail_to_local_mailbox() for details.
# Some of the predefined aliases are 'virus-quarantine' and 'spam-quarantine'.
# Setting $virus_quarantine_to ($spam_quarantine_to) to this string will:
# * if $QUARANTINEDIR is a directory, each quarantined virus will go
# to a separate file in the $QUARANTINEDIR directory (traditional
# amavis style, similar to maildir mailbox format);
# * otherwise $QUARANTINEDIR is treated as a file name of a Unix-style
# mailbox. All quarantined messages will be appended to this file.
# Amavisd child process must obtain an exclusive lock on the file during
# delivery, so this may be less efficient than using individual files
# or forwarding to MTA, and it may not work across NFS or other non-local
# file systems (but may be handy for pickup of quarantined files via IMAP
# for example);
# VARIANT 3:
# any email address (must contain '@').
# The e-mail messages to be quarantined will be handed to MTA
# for delivery to the specified address. If a recipient address local to MTA
# is desired, you may leave the domain part empty, e.g. 'infected@', but the
# '@' character must nevertheless be included to distinguish it from variant 2.
# This method enables more refined delivery control made available by MTA
# (e.g. its aliases file, other local delivery agents, dealing with
# privileges and file locking when delivering to user's mailbox, nonlocal
# delivery and forwarding, fan-out lists). Make sure the mail-to-be-quarantined
# will not be handed back to amavisd for checking, as this will cause a loop
# (hopefully broken at some stage)! If this can be assured, notifications
# will benefit too from not being unecessarily virus-scanned.
# By default this is safe to do with Postfix and Exim v4 and dual-sendmail
# setup, but probably not safe with sendmail milter interface without
# precaution.
# (the default value is undef, meaning no quarantine)
#$virus_quarantine_to = '[email protected]'; # traditional local quarantine
#$virus_quarantine_to = 'infected@'; # forward to MTA for delivery
#$virus_quarantine_to = "virus-quarantine\@$mydomain"; # similar
#$virus_quarantine_to = '[email protected]'; # similar
#$virus_quarantine_to = undef; # no quarantine
#$virus_quarantine_to = new_RE( # per-recip multiple quarantines
# [qr'^user@example\.com$'i => 'infected@'],
# [qr'^(.*)@example\.com$'i => 'virus-${1}@example.com'],
# [qr'^(.*)(@[^@])?$'i => 'virus-${1}${2}'],
# [qr/.*/ => 'virus-quarantine'] );
# similar for spam
# (the default value is undef, meaning no quarantine)
#$spam_quarantine_to = '[email protected]';
#$spam_quarantine_to = "spam-quarantine\@$mydomain";
#$spam_quarantine_to = new_RE( # per-recip multiple quarantines
# [qr'^(.*)@example\.com$'i => 'spam-${1}@example.com'],
# [qr/.*/ => 'spam-quarantine'] );
# In addition to per-recip quarantine, a by-sender lookup is possible. It is
# similar to $spam_quarantine_to, but the lookup key is the sender address:
#$spam_quarantine_bysender_to = undef; # dflt: no by-sender spam quarantine
# Add X-Virus-Scanned header field to mail?
$X_HEADER_TAG = 'X-Virus-Scanned'; # (default: undef)
# Leave empty to add no header field # (default: undef)
$X_HEADER_LINE = "by amavisd-new at $mydomain";
$remove_existing_x_scanned_headers = 0; # leave existing X-Virus-Scanned alone
#$remove_existing_x_scanned_headers= 1; # remove existing headers
# (defaults to false)
$remove_existing_spam_headers = 0; # leave existing X-Spam* headers alone
#$remove_existing_spam_headers = 1; # remove existing spam headers if
# spam scanning is enabled (default)
# set $bypass_decode_parts to true if you only do spam scanning, or if you
# have a good virus scanner that can deal with compression and recursively
# unpacking archives by itself, and save amavisd the trouble.
# Disabling decoding also causes banned_files checking to only see
# MIME names and MIME content types, not the content classification types
# as provided by the file(1) utility.
# It is a double-edged sword, make sure you know what you are doing!
#$bypass_decode_parts = 1; # (defaults to false)
# don't trust this file type or corresponding unpacker for this file type,
# keep both the original and the unpacked file
# (lookup key is what file(1) utility returned):
$keep_decoded_original_re = new_RE(
qr'^(ASCII|text|uuencoded|xxencoded|binhex)'i,
# Checking for banned MIME types and names. If any mail part matches,
# the whole mail is rejected, much like the way viruses are handled.
# A list in object $banned_filename_re can be defined to provide a list
# of Perl regular expressions to be matched against each part's:
# * Content-Type value (both declared and effective mime-type),
# including the possible security risk content types
# message/partial and message/external-body, as specified by rfc2046;
# * declared (recommended) file names as specified by MIME subfields
# Content-Disposition.filename and Content-Type.name, both in their
# raw (encoded) form and in rfc2047-decoded form if applicable;
# * file content type as guessed by 'file(1)' utility, both the raw result
# from file(1), as well as short type name, classified into names such as
# .asc, .txt, .html, .doc, .jpg, .pdf, .zip, .exe, ..., which is always
# beginning with a dot - see subroutine determine_file_types().
# This step is done only if $bypass_decode_parts is not true.
# * leave $banned_filename_re undefined to disable these checks
# (giving an empty list to new_RE() will also always return false)
$banned_filename_re = new_RE(
qr'\.[a-zA-Z][a-zA-Z0-9]{0,3}\.(vbs|pif|scr|bat|com|exe|dll)$'i, # double extension
# qr'.\.(exe|vbs|pif|scr|bat|com)$'i, # banned extension - basic
# qr'.\.(ade|adp|bas|bat|chm|cmd|com|cpl|crt|exe|hlp|hta|inf|ins|isp|js|
# jse|lnk|mdb|mde|msc|msi|msp|mst|pcd|pif|reg|scr|sct|shs|shb|vb|
# vbe|vbs|wsc|wsf|wsh)$'ix, # banned extension - long
# qr'^\.(exe|zip|lha|tnef)$'i, # banned file(1) types
# qr'^application/x-msdownload$'i, # banned MIME types
# qr'^message/partial$'i, qr'^message/external-body$'i, # rfc2046
# See http://support.microsoft.com/default.aspx?scid=kb;EN-US;q262631
# and http://www.cknow.com/vtutor/vtextensions.htm
# A little trick: a pattern qr'\.exe$' matches both a short type name '.exe',
# as well as any file name which happens to end with .exe. If only matching
# a file name is desired, but not the short name, a pattern qr'.\.exe$'i
# or similar may be used, which requires that at least one character preceeds
# the '.exe', and so it will never match short file types, which always start
# with a dot.
# Section V - Per-recipient and per-sender handling, whitelisting, etc.
# %virus_lovers, @virus_lovers_acl and $virus_lovers_re lookup tables:
# (these should be considered policy options, they do not disable checks,
# see bypas*checks for that!)
# Exclude certain RECIPIENTS from virus filtering by adding their lower-cased
# envelope e-mail address (or domain only) to the hash %virus_lovers, or to
# the access list @virus_lovers_acl - see README.lookups and examples.
# Make sure the appropriate form (e.g. external/internal) of address
# is used in case of virtual domains, or when mapping external to internal
# addresses, etc. - this is MTA-specific.
# Notifications would still be generated however (see the overall
# picture above), and infected mail (if passed) gets additional header:
# X-AMaViS-Alert: INFECTED, message contains virus: ...
# (header not inserted with milter interface!)
# NOTE (milter interface only): in case of multiple recipients,
# it is only possible to drop or accept the message in its entirety - for all
# recipients. If all of them are virus lovers, we'll accept mail, but if
# at least one recipient is not a virus lover, we'll discard the message.
# %bypass_virus_checks, @bypass_virus_checks_acl and $bypass_virus_checks_re
# lookup tables:
# (this is mainly a time-saving option, unlike virus_lovers* !)
# Similar in concept to %virus_lovers, a hash %bypass_virus_checks,
# access list @bypass_virus_checks_acl and regexp list $bypass_virus_checks_re
# are used to skip entirely the decoding, unpacking and virus checking,
# but only if ALL recipients match the lookup.
# %bypass_virus_checks/@bypass_virus_checks_acl/$bypass_virus_checks_re
# do NOT GUARANTEE the message will NOT be checked for viruses - this may
# still happen when there is more than one recipient for a message, and
# not all of them match these lookup tables. To guarantee virus delivery,
# a recipient must also match %virus_lovers/@virus_lovers_acl lookups
# (but see milter limitations above),
# NOTE: it would not be clever to base virus checks on SENDER address,
# since there are no guarantees that it is genuine. Many viruses
# and spam messages fake sender address. To achieve selective filtering
# based on the source of the mail (e.g. IP address, MTA port number, ...),
# use mechanisms provided by MTA if available.
# Similar to lookup tables controlling virus checking, there exist
# spam scanning, banned names/types, and headers_checks control counterparts:
# %spam_lovers, @spam_lovers_acl, $spam_lovers_re
# %banned_files_lovers, @banned_files_lovers_acl, $banned_files_lovers_re
# %bad_header_lovers, @bad_header_lovers_acl, $bad_header_lovers_re
# and:
# %bypass_spam_checks/@bypass_spam_checks_acl/$bypass_spam_checks_re
# %bypass_banned_checks/@bypass_banned_checks_acl/$bypass_banned_checks_re
# %bypass_header_checks/@bypass_header_checks_acl/$bypass_header_checks_re
# See README.lookups for details about the syntax.
# The following example disables spam checking altogether,
# since it matches any recipient e-mail address (any address
# is a subdomain of the top-level root DNS domain):
# @bypass_spam_checks_acl = qw( . );
# @bypass_header_checks_acl = qw( [email protected] );
# @bad_header_lovers_acl = qw( [email protected] );
# See README.lookups for further detail, and examples below.
# $virus_lovers{lc("postmaster\@$mydomain")} = 1;
# $virus_lovers{lc('[email protected]')} = 1;
# $virus_lovers{lc('[email protected]')} = 1;
# $virus_lovers{lc('some.user@')} = 1; # this recipient, regardless of domain
# $virus_lovers{lc('[email protected]')} = 0; # never, even if domain matches
# $virus_lovers{lc('example.com')} = 1; # this domain, but not its subdomains
# $virus_lovers{lc('.example.com')}= 1; # this domain, including its subdomains
#or:
# @virus_lovers_acl = qw( [email protected] !lab.xxx.com .xxx.com yyy.org );
# $bypass_virus_checks{lc('[email protected]')} = 1;
# @bypass_virus_checks_acl = qw( some.ddd !butnot.example.com .example.com );
# @virus_lovers_acl = qw( [email protected] );
# $virus_lovers_re = new_RE( qr'(helpdesk|postmaster)@example\.com$'i );
# $spam_lovers{lc("postmaster\@$mydomain")} = 1;
# $spam_lovers{lc('[email protected]')} = 1;
# $spam_lovers{lc('[email protected]')} = 1;
# @spam_lovers_acl = qw( !.example.com );
# $spam_lovers_re = new_RE( qr'^user@example\.com$'i );
# don't run spam check for these RECIPIENT domains:
# @bypass_spam_checks_acl = qw( d1.com .d2.com a.d3.com );
# or the other way around (bypass check for all BUT these):
# @bypass_spam_checks_acl = qw( !d1.com !.d2.com !a.d3.com . );
# a practical application: don't check outgoing mail for spam:
# @bypass_spam_checks_acl = ( "!.$mydomain", "." );
# (a downside of which is that such mail will not count as ham in SA bayes db)
# Where to find SQL server(s) and database to support SQL lookups?
# A list of triples: (dsn,user,passw). (dsn = data source name)
# Specify more than one for multiple (backup) SQL servers.
# See 'man DBI', 'man DBD::mysql', 'DBD::Pg', ... for details.
# @lookup_sql_dsn =
# ( ['DBI:mysql:mail:host1', 'some-username1', 'some-password1'],
# ['DBI:mysql:mail:host2', 'some-username2', 'some-password2'] );
# ('mail' in the example is the database name, choose what you like)
# With PostgreSQL the dsn (first element of the triple) may look like:
# 'DBI:Pg:host=host1;dbname=mail'
# The SQL select clause to fetch per-recipient policy settings.
# The %k will be replaced by a comma-separated list of query addresses
# (e.g. full address, domain only, catchall). Use ORDER, if there
# is a chance that multiple records will match - the first match wins.
# If field names are not unique (e.g. 'id'), the later field overwrites the
# earlier in a hash returned by lookup, which is why we use '*,users.id'.
# No need to uncomment the following assignment if the default is ok.
# $sql_select_policy = 'SELECT *,users.id FROM users,policy'.
# ' WHERE (users.policy_id=policy.id) AND (users.email IN (%k))'.
# ' ORDER BY users.priority DESC';
# The SQL select clause to check sender in per-recipient whitelist/blacklist
# The first SELECT argument '?' will be users.id from recipient SQL lookup,
# the %k will be sender addresses (e.g. full address, domain only, catchall).
# The default value is:
# $sql_select_white_black_list = 'SELECT wb FROM wblist,mailaddr'.
# ' WHERE (rid=?) AND (sid=mailaddr.id) AND (mailaddr.email IN (%k))'.
# ' ORDER BY mailaddr.priority DESC';
# To disable SQL white/black list, set to undef (otherwise comment-out
# the following statement, leaving it at the default value):
$sql_select_white_black_list = undef; # undef disables SQL white/blacklisting
# If you decide to pass viruses (or spam) to certain recipients using the
# above lookup tables or using $final_virus_destiny=1, you can set
# the variable $addr_extension_virus ($addr_extension_spam) to some
# string, and the recipient address will have this string appended
# as an address extension to the local-part of the address. This extension
# can be used by final local delivery agent to place such mail in different
# folders. Leave these two variables undefined or empty strings to prevent
# appending address extensions. Setting has no effect on recipient which will
# not be receiving viruses/spam. Recipients who do not match lookup tables
# local_domains* are not affected.
# LDAs usually default to stripping away address extension if no special
# handling is specified, so having this option enabled normally does no harm,
# provided the $recipients_delimiter matches the setting on the final
# MTA's LDA.
# $addr_extension_virus = 'virus'; # (default is undef, same as empty)
# $addr_extension_spam = 'spam'; # (default is undef, same as empty)
# $addr_extension_banned = 'banned'; # (default is undef, same as empty)
# Delimiter between local part of the recipient address and address extension
# (which can optionally be added, see variables $addr_extension_virus and
# $addr_extension_spam). E.g. recipient address <[email protected]> gets changed
# to <[email protected]>.
# Delimiter should match equivalent (final) MTA delimiter setting.
# (e.g. for Postfix add 'recipient_delimiter = +' to main.cf)
# Setting it to an empty string or to undef disables this feature
# regardless of $addr_extension_virus and $addr_extension_spam settings.
$recipient_delimiter = '+'; # (default is '+')
# true: replace extension; false: append extension
# $replace_existing_extension = 1; # (default is false)
# Affects matching of localpart of e-mail addresses (left of '@')
# in lookups: true = case sensitive, false = case insensitive
$localpart_is_case_sensitive = 0; # (default is false)
# ENVELOPE SENDER WHITELISTING / BLACKLISTING - GLOBAL (RECIPIENT-INDEPENDENT)
# WHITELISTING: use ENVELOPE SENDER lookups to ENSURE DELIVERY from whitelisted
# senders even if the message is recognized as spam. Effectively, for the
# specified senders, message RECIPIENTS temporarily become 'spam_lovers', with
# further processing being the same as otherwise specified for spam lovers.
# It does not turn off inserting spam-related headers, if they are enabled.
# BLACKLISTING: messages from specified SENDERS are DECLARED SPAM.
# Effectively, for messages from blacklisted senders, spam level
# is artificially pushed high, and the normal spam processing applies,
# resulting in 'X-Spam-Flag: YES', high 'X-Spam-Level' bar and other usual
# reactions to spam, including possible rejection. If the message nevertheless
# still passes (e.g. for spam loving recipients), it is tagged as BLACKLISTED
# in the 'X-Spam-Status' header field, but the reported spam value and
# set of tests in this report header field (if available from SpamAssassin,
# which may have not been called) is not adjusted.
# A sender may be both white- and blacklisted at the same time,
# settings are independent. For example, being both white- and blacklisted,
# message is delivered to recipients, but is tagged as spam.
# If ALL recipients of the message either white- or blacklist the sender,
# spam scanning (calling the SpamAssassin) is bypassed, saving on time.
# The following variables (lookup tables) are available, with the semantics
# and syntax as specified in README.lookups:
# %whitelist_sender, @whitelist_sender_acl, $whitelist_sender_re
# %blacklist_sender, @blacklist_sender_acl, $blacklist_sender_re
# SOME EXAMPLES:
#ACL:
# @whitelist_sender_acl = qw( .example.com );
# @whitelist_sender_acl = ( ".$mydomain" ); # $mydomain and its subdomains
# NOTE: This is not a reliable way of turning off spam checks for
# locally-originating mail, as sender address can easily be faked.
# To reliably avoid spam-scanning outgoing mail,
# use @bypass_spam_checks_acl .
#RE:
# $whitelist_sender_re = new_RE(
# qr'^postmaster@.*\bexample\.com$'i,
# qr'^owner-[^@]*@'i, qr'-request@'i,
# qr'\.example\.com$'i );
$blacklist_sender_re = new_RE(
qr'^(bulkmail|offers|cheapbenefits|earnmoney|foryou|greatcasino)@'i,
qr'^(investments|lose_weight_today|market.alert|money2you|MyGreenCard)@'i,
qr'^(new\.tld\.registry|opt-out|opt-in|optin|saveonlsmoking2002k)@'i,
qr'^(specialoffer|specialoffers|stockalert|stopsnoring|wantsome)@'i,
qr'^(workathome|yesitsfree|your_friend|greatoffers)@'i,
qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i,
#HASH lookup variant:
# NOTE: Perl operator qw splits its argument string by whitespace
# and produces a list. This means that addresses can not contain
# whitespace, and there is no provision for comments within the string.
# You can use the normal Perl list syntax if you have special requirements,
# e.g. map {...} ('one user@bla', '.second.com'), or use read_hash to read
# addresses from a file.
# a hash lookup table can be read from a file,
# one address per line, comments and empty lines are permitted:
# read_hash(\%whitelist_sender, '/var/amavis/whitelist_sender');
# ... or set directly:
# $whitelist_sender{''} = 1; # don't spam-check MTA bounces
map { $whitelist_sender{lc($_)}=1 } (qw(
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
[email protected]
returns.groups.yahoo.com
# ENVELOPE SENDER WHITELISTING / BLACKLISTING - PER-RECIPIENT
# The same semantics as for global white/blacklisting applies, but this
# time each recipient (or its domain, or subdomain, ...) can be given
# an individual lookup table for matching senders. The per-recipient lookups
# override the global lookups, which serve as a fallback default.
# Specify a two-level lookup table: the key for the outer table is recipient,
# and the result should be an inner lookup table (hash or ACL or RE),
# where the key used will be the sender.
#$per_recip_blacklist_sender_lookup_tables = {
# '[email protected]'=>new_RE(qr'^(inkjetplanet|marketopt|MakeMoney)\d*@'i),
# '[email protected]'=>[qw( [email protected],org .d2.example,org )],
#$per_recip_whitelist_sender_lookup_tables = {
# '[email protected]' => [qw( [email protected] .other.example.org )],
# '.my1.example.com' => [qw( !foe.other.example,org .other.example,org )],
# '.my2.example.com' => read_hash('/var/amavis/my2-wl.dat'),
# 'abuse@' => { 'postmaster@'=>1,
# '[email protected]'=>1, '[email protected]'=>1 },
# Section VI - Resource limits
# Sanity limit to the number of allowed recipients per SMTP transaction
# $smtpd_recipient_limit = 1000; # (default is 1000)
# Resource limitations to protect against mail bombs (e.g. 42.zip)
# Maximum recursion level for extraction/decoding (0 or undef disables limit)
$MAXLEVELS = 14; # (default is undef, no limit)
# Maximum number of extracted files (0 or undef disables the limit)
$MAXFILES = 1500; # (default is undef, no limit)
# For the cumulative total of all decoded mail parts we set max storage size
# to defend against mail bombs. Even though parts may be deleted (replaced
# by decoded text) during decoding, the size they occupied is _not_ returned
# to the quota pool.
# Parameters to storage quota formula for unpacking/decoding/decompressing
# Formula:
# quota = max($MIN_EXPANSION_QUOTA,
# $mail_size*$MIN_EXPANSION_FACTOR,
# min($MAX_EXPANSION_QUOTA, $mail_size*$MAX_EXPANSION_FACTOR))
# In plain words (later condition overrules previous ones):
# allow MAX_EXPANSION_FACTOR times initial mail size,
# but not more than MAX_EXPANSION_QUOTA,
# but not less than MIN_EXPANSION_FACTOR times initial mail size,
# but never less than MIN_EXPANSION_QUOTA
$MIN_EXPANSION_QUOTA = 100*1024; # bytes (default undef, not enforced)
$MAX_EXPANSION_QUOTA = 300*1024*1024; # bytes (default undef, not enforced)
$MIN_EXPANSION_FACTOR = 5; # times original mail size (must be specified)
$MAX_EXPANSION_FACTOR = 500; # times original mail size (must be specified)
# Section VII - External programs, virus scanners
# Specify a path string, which is a colon-separated string of directories
# (no trailing slashes!) to be assigned to the environment variable PATH
# and to serve for locating external programs below.
# NOTE: if $daemon_chroot_dir is nonempty, the directories will be
# relative to the chroot directory specified;
$path = '/usr/local/sbin:/usr/local/bin:/usr/sbin:/sbin:/usr/bin:/bin';
# Specify one string or a search list of strings (first match wins).
# The string (or: each string in a list) may be an absolute path,
# or just a program name, to be located via $path;
# Empty string or undef (=default) disables the use of that external program.
# Optionally command arguments may be specified - only the first substring
# up to the whitespace is used for file searching.
$file = 'file'; # file(1) utility; use 3.41 or later to avoid vulnerability
$gzip = 'gzip';
$bzip2 = 'bzip2';
$lzop = 'lzop';
$uncompress = ['uncompress', 'gzip -d', 'zcat'];
$unfreeze = ['unfreeze', 'freeze -d', 'melt', 'fcat'];
$arc = ['nomarch', 'arc'];
$unarj = ['arj', 'unarj']; # both can extract, same options
$unrar = ['rar', 'unrar']; # both can extract, same options
$zoo = 'zoo';
$lha = 'lha';
$cpio = 'cpio';
# SpamAssassin settings
# $sa_local_tests_only is passed to Mail::SpamAssassin::new as a value
# of the option local_tests_only. See Mail::SpamAssassin man page.
# If set to 1, no tests that require internet access will be performed.
$sa_local_tests_only = 1; # (default: false)
#$sa_auto_whitelist = 1; # turn on AWL (default: false)
$sa_mail_body_size_limit = 64*1024; # don't waste time on SA if mail is larger
# (less than 1% of spam is > 64k)
# default: undef, no limitations
# default values, can be overridden by more specific lookups, e.g. SQL
$sa_tag_level_deflt = -999; # add spam info headers if at, or above that level
$sa_tag2_level_deflt = 3.0; # add 'spam detected' headers at that level
$sa_kill_level_deflt = 22.0;
#$sa_kill_level_deflt = $sa_tag2_level_deflt; # triggers spam evasive actions
# at or above that level: bounce/reject/drop,
# quarantine, and adding mail address extension
# The $sa_tag_level_deflt, $sa_tag2_level_deflt and $sa_kill_level_deflt
# may also be hashrefs to hash lookup tables, to make static per-recipient
# settings possible without having to resort to SQL or LDAP lookups.
# a quick reference:
# tag_level controls adding the X-Spam-Status and X-Spam-Level headers,
# tag2_level controls adding 'X-Spam-Flag: YES', and editing Subject,
# kill_level controls 'evasive actions' (reject, quarantine, extensions);
# it only makes sense to maintain the relationship:
# tag_level <= tag2_level <= kill_level
# string to prepend to Subject header field when message exceeds tag2 level
$sa_spam_subject_tag = '*** JUNK MAIL ***'; # (defaults to undef, disables)
# (only seen when spam is not to be rejected
# and recipient is in local_domains*)
$sa_spam_modifies_subj = 1; # may be a ref to a lookup table, default is true
# Example: modify Subject for all local recipients except [email protected]
#$sa_spam_modifies_subj = [qw( [email protected] . )];
# @av_scanners is a list of n-tuples, where fields semantics is:
# 1. av scanner plain name, to be used in log and reports;
# 2. scanner program name; this string will be submitted to subroutine
# find_external_programs(), which will try to find the full program
# path name; if program is not found, this scanner is disabled.
# Besides a simple string (full program path name or just the basename
# to be looked for in PATH), this may be an array ref of alternative
# program names or full paths - the first match in the list will be used;
# As a special case for more complex scanners, this field may be
# a subroutine reference, and the whole n-tuple is passed to it as args.
# 3. command arguments to be given to the scanner program;
# a substring {} will be replaced by the directory name to be scanned,
# i.e. "$tempdir/parts"
# 4. an array ref of av scanner exit status values, or a regexp (to be
# matched against scanner output), indicating NO VIRUSES found;
# 5. an array ref of av scanner exit status values, or a regexp (to be
# matched against scanner output), indicating VIRUSES WERE FOUND;
# Note: the virus match prevails over a 'not found' match, so it is safe
# even if 4. matches for viruses too;
# 6. a regexp (to be matched against scanner output), returning a list
# of virus names found.
# 7. and 8.: (optional) subroutines to be executed before and after scanner
# (e.g. to set environment or current directory);
# see examples for these at KasperskyLab AVP and Sophos sweep.
# NOTES:
# - NOT DEFINING @av_scanners (e.g. setting it to empty list, or deleting the
# whole assignment) TURNS OFF LOADING AND COMPILING OF THE ANTIVIRUS CODE
# (which can be handy if all you want to do is spam scanning);
# - the order matters: although _all_ available entries from the list are
# always tried regardless of their verdict, scanners are run in the order
# specified: the report from the first one detecting a virus will be used
# (providing virus names and scanner output); REARRANGE THE ORDER TO WILL;
# - it doesn't hurt to keep an unused command line scanner entry in the list
# if the program can not be found; the path search is only performed once
# during the program startup;
# CORROLARY: to disable a scanner that _does_ exist on your system,
# comment out its entry or use undef or '' as its program name/path
# (second parameter). An example where this is almost a must: disable
# Sophos 'sweep' if you have its daemonized version Sophie or SAVI-Perl
# (same for Trophie/vscan, and clamd/clamscan), or if another unrelated
# program happens to have a name matching one of the entries ('sweep'
# again comes to mind);
# - it DOES HURT to keep unwanted entries which use INTERNAL SUBROUTINES
# for interfacing (where the second parameter starts with \&).
# Keeping such entry and not having a corresponding virus scanner daemon
# causes an unnecessary connection attempt (which eventually times out,
# but it wastes precious time). For this reason the daemonized entries
# are commented in the distribution - just remove the '#' where needed.
@av_scanners = (
# ### http://www.vanja.com/tools/sophie/
# ['Sophie',
# \&ask_daemon, ["{}/\n", '/var/run/sophie'],
# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
# ### http://www.csupomona.edu/~henson/www/projects/SAVI-Perl/
# ['Sophos SAVI', \&sophos_savi ],
# ### http://clamav.elektrapro.com/
# ['Clam Antivirus-clamd',
# \&ask_daemon, ["CONTSCAN {}\n", '/var/amavis/clamd'],
# qr/\bOK$/, qr/\bFOUND$/,
# qr/^.*?: (?!Infected Archive)(.*) FOUND$/ ],
# # NOTE: run clamd under the same user as amavisd,
# # match the socket name in clamav.conf to the socket name in this entry
# ### http://www.openantivirus.org/
# ['OpenAntiVirus ScannerDaemon (OAV)',
# \&ask_daemon, ["SCAN {}\n", '127.0.0.1:8127'],
# qr/^OK/, qr/^FOUND: /, qr/^FOUND: (.+)/ ],
# ### http://www.vanja.com/tools/trophie/
# ['Trophie',
# \&ask_daemon, ["{}/\n", '/var/run/trophie'],
# qr/(?x)^ 0+ ( : | [\000\r\n]* $)/, qr/(?x)^ 1 ( : | [\000\r\n]* $)/,
# qr/(?x)^ [-+]? \d+ : (.*?) [\000\r\n]* $/ ],
# ### http://www.f-prot.com/
# ['FRISK F-Prot Daemon',
# \&ask_daemon,
# ["GET {}/*?-dumb%20-archive HTTP/1.0\r\n\r\n",
# ['127.0.0.1:10200','127.0.0.1:10201','127.0.0.1:10202',
# '127.0.0.1:10203','127.0.0.1:10204'] ],
# qr/(?i)<summary[^>]*>clean<\/summary>/,
# qr/(?i)<summary[^>]*>infected<\/summary>/,
# qr/(?i)<name>(.+)<\/name>/ ],
['KasperskyLab AntiViral Toolkit Pro (AVP)', ['avp','kavscanner'],
"-* -P -B -Y -O- {}", [0,3,8], [2,4], # any use for -A -K ?
qr/infected: (.+)/,
sub {chdir('/opt/AVP') or die "Can't chdir to AVP: $!"},
sub {chdir($TEMPBASE) or die "Can't chdir back to $TEMPBASE $!"},
['KasperskyLab AVPDaemonClient',
[ '/opt/AVP/kavdaemon', 'kavdaemon',
'/opt/AVP/AvpDaemonClient', 'AvpDaemonClient',
'/opt/AVP/AvpTeamDream', 'AvpTeamDream',
'/opt/AVP/avpdc', 'avpdc' ],
'{}', [0,8], [3,4,5,6], qr/infected: ([^\r\n]+)/ ],
# change the startup-script in /etc/init.d/kavd to:
# DPARMS="-I0 -Y -* /var/amavis"
# adjusting /var/amavis above to match your $TEMPBASE.
# NOTE: cd /opt/AVP/DaemonClients; configure; cd Sample; make
# cp AvpDaemonClient /opt/AVP/
### http://www.hbedv.com/ or http://www.centralcommand.com/
['H+BEDV AntiVir or CentralCommand Vexira Antivirus',
['antivir','vexira'],
'--allfiles -noboot -nombr -rs -s -z {}', [0], qr/ALERT:|VIRUS:/,
qr/(?x)^\s* (?: ALERT: \s* (?: \[ | [^']* ' ) |
(?i) VIRUS:\ .*?\ virus\ '?) ( [^\]\s']+ )/ ],
# NOTE: remove the -z if you only have a demo version
### http://www.commandsoftware.com/
['Command AntiVirus for Linux', 'csav',
'-all -archive -packed {}', [50], [51,52,53],
qr/Infection: (.+)/ ],
### http://www.symantec.com/
['Symantec CarrierScan via Symantec CommandLineScanner',
['cscmdline','savsecls'],
'-a scan -i 1 -v -s 127.0.0.1:7777 {}',
qr/Files Infected: 0/, qr/^Infected: /,
qr/Info:\s+(.+)/ ],
### http://drweb.imshop.de/
['DrWeb Antivirus for Linux/FreeBSD/Solaris', 'drweb',
'-al -ar -fm -go -ha -ml -ot -sd -up {}',
[0], [1], sub {('no-name')} ],
### http://www.f-secure.com/products/anti-virus/
['F-Secure Antivirus', 'fsav',
'--dumb --archive {}', [0], [3,8],
qr/(?:infection|Infected): (.+)/ ],
['CAI InoculateIT', 'inocucmd',
'-sec -nex {}', [0], [100],
qr/was infected by virus (.+)/ ],
['MkS_Vir for Linux (beta)', ['mks32','mks'],
'-s {}/*', [0], [1,2],
qr/--[ \t]*(.+)/ ],
['MkS_Vir daemon',
'mksscan', '-s -q {}', [0], [1..7],
qr/^... (\S+)/ ],
### http://www.nod32.com/
['ESET Software NOD32', 'nod32',
'-all -subdir+ {}', [0], [1,2],
qr/^.+? - (.+?)\s*(?:backdoor|joke|trojan|virus|worm)/ ],
### http://www.nod32.com/
['ESET Software NOD32 - Client/Server Version', 'nod32cli',
'-a -r -d recurse --heur standard {}', [0], [10,11],
qr/^\S+\s+infected:\s+(.+)/ ],
### http://www.norman.com/products_nvc.shtml
['Norman Virus Control v5 / Linux', 'nvccmd',
'-c -l:0 -s -u {}', [0], [1],
qr/(?i).* virus in .* -> \'(.+)\'/ ],
### http://www.pandasoftware.com/
['Panda Antivirus for Linux', ['pavcl','pavc'],
'-aut -aex -heu -cmp -nor -nso -eng {}',
qr/Number of files infected\.*: 0(?!\d)/,
qr/Number of files infected\.*: 0*[1-9]/,
qr/Found virus :\s*(\S+)/ ],
# Check your RAV license terms before fiddling with the following two lines!
# ['GeCAD RAV AntiVirus 8', 'ravav',
# '--all --archive --mail {}', [1], [2,3,4,You are welcome. I'm glad you got it back up.
(1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
(2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
(3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
(4) Add some SARE rules:
Visit http://www.rulesemporium.com/rules.htm and download the following rules:
70sareadult.cf
70saregenlsubj0.cf
70sareheader0.cf
70sarehtml0.cf
70sareobfu0.cf
70sareoem.cf
70sarespoof.cf
70sarestocks.cf
70sareunsub.cf
72sare_redirectpost
Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
backhair.cf
bogus-virus-warnings.cf
chickenpox.cf
weeds.cf
Copy these rules to /etc/mail/spamassassin/
Then stop and restart mail services.
There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck! -
Need help in migrating MSSQL 2008 database to Oracle 11g
Hi everyone,
So, as stated above I want to migrate our apps database from mssql to oracle as it is what the client wants..
I have absolutely no experience working with Oracle.
My computer is running windows 7 32 bit, our DB people installed a 9i client for me to connect to the server and the my SQL Developer just came straight from the site. (So it's the latest release)
I have one "DBA" access to the database I'm trying to migrate to.
I've downloaded the Oracle SQL Developer and have been attempting to "migrate" our database using the migration tool for 3 days now, but to no avail.
So the error I'm encountering is that the migration just stops, and a popup with the message "Migration actions have failed. Check the migration reports for details. : The connection is closed." comes up.
I have no idea where the migration report can be found. As I cannot find it in the reports tab available.
I'm hoping someone here can have the patience and knowledge to get me through this?The migration report is generally created under the "Documents and Settings" folder under application data/sqldeveloper. Key thing is at what stage the failure occurs?. Does it happen immediately after you start the data migration or after a while?.
If the data migration process fails immediately after the start then there might be an issue with permissions on the source/target databases. Probably it is having trouble with disabling constraints on the target database. Because rememeber SQL Developer will disable constraints before it moves data across. My preference is to give DBA privilege to the Oracle user to avoid just cases or you can disable the constraints yourself by using scripts. Check the source/target database date/time format masks. You can set them up in SQL Developer.
If the data migration process fails after a while and you notice that data for some tables is migrated then you may be running into network timeouts or space issues on Oracle etc.
HTH
Regards
Prakash -
Nokia N8 Symbian Belle - Mobile Data Auto Connecti...
I have recently updated my n8 to symbian belle and I am having trouble in disabling the mobile data. For some reason the 3G connection icon keeps on beeping in the menu bar. It keeps on trying to connect to packet data even though i have disabled the mobile data from the menu bar. I also disable it from the connection and admin settings but its still trying to connect to the 3G network all the time. It is big issue for me because the battery is only lasting about 12hours where as before it lasted almost 2 days. Also I do not have any access points for the 3G network, I only got a wifi access point on it.
i had one program which kept running on the background, i removed it now but it still trying to connect somehow. I went through all my applications also. There wasnt any given net settings. Could it be because my mobile was locked to a 3 network before and the OS version is based on the 3 network? It comes with useless apps which are net based but do not work for me because you need to have a 3 network and they cant be removed.
-
Hi All,
I am facing a problem with the dynamic variable refreshment. I have used dynamic variable in the where clause in the content of a table in the BMM layer.
But according to the refresh time the variable is getting refreshed in the RPD but the value in the Webcat is not reflecting at the same time. It is taking time to get reflected in the Webcat reports and the time is not specific. I have clear the cache in the Webcat but getting no result out of it. I think the value of the variable is taking time to get reflected in the content of the table.Might be that the presentation server cache is giving you trouble, try disabling it:
http://obiee101.blogspot.com/2008/12/obiee-bypassing-presentation-web-cache.html
regards
John
http://obiee101.blogspot.com -
I need MainStage to NOT respond to buttons on my kybd controller.
I have a Roland A-37 with lots of parameter buttons. Sometimes a button gets accidentally pushed, and it either changes my patch or maxes out my volume on the channel strips. It's a whole lot of trouble to disable every button on my controller, and I don't really want to, anyway. I just want MainStage to ignore MIDI messages that come in from those buttons being pushed. I assume I can do this in Layout, by learning the buttons and then changing something about the way they work. I could probably figure it out myself if I wanted to spend a lot of time, but I'm new to this software, and I need this issue solved in the next 2 days.
Hi
A glance through the A37 manual (section 5.3) suggests that some of the controller buttons can be assigned to transmit a whole bunch of MIDI messages when you change a Patch on the keyboard:
CC7
CC10
CC11
CC91
CC93
CC94
CC65
(CC5)
I think you will need to create Screen Controls manually for each of these CC messages in order to block them. MS seems to be "assigning" to the last message of a bunch received (CC65)
In addition, the A37 would seem to transmit Bank Select (CC0 and CC32) which MS ignores.
It could be worth using MIDI Monitor to check exactly what is being transmitted from the A37:
http://www.snoize.com/MIDIMonitor/
CCT -
Getting this error on server start up : WLS 6.1 sp2 with a patch CR067966_610sp2.jar.
( pathch for # CR067966)
java.lang.LinkageError: loader constraints violated when linking org/xml/sax/HandlerBase
class.
We have strut actions defined in the struts-config.xml and all these work well with
sp1.
Anybody got a idea whats happening?
Full stacktrace:
<Jun 20, 2002 10:00:15 AM EDT> <Error> <HTTP> <[WebAppServletContext(7109294,sysadmin.web,/sysadmin.
web)] Error loading servlet: 'action'
java.lang.LinkageError: loader constraints violated when linking org/xml/sax/HandlerBase
class
at org.apache.struts.digester.Digester.parse(Digester.java:755)
at org.apache.struts.action.ActionServlet.initMapping(ActionServlet.java:1331)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:465)
at com.mediaocean.struts.SysadminActionServlet.init(SysadminActionServlet.java:58)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java:700)
at weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.java:643)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:588)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:2
221)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:
2165)
at weblogic.servlet.internal.HttpServer.preloadServlets(HttpServer.java:475)
at weblogic.servlet.internal.WebService.preloadServlets(WebService.java:450)
at weblogic.t3.srvr.ServletInitRunner.run(ServletInitRunner.java:49)
at java.lang.Thread.run(Thread.java:484)
>
<Jun 20, 2002 10:00:15 AM EDT> <Error> <HTTP> <[WebAppServletContext(7109294,sysadmin.web,/sysadmin.
web)] Error loading servlet: "action"
java.lang.LinkageError: loader constraints violated when linking org/xml/sax/HandlerBase
class
at org.apache.struts.digester.Digester.parse(Digester.java:755)
at org.apache.struts.action.ActionServlet.initMapping(ActionServlet.java:1331)
at org.apache.struts.action.ActionServlet.init(ActionServlet.java:465)
at com.mediaocean.struts.SysadminActionServlet.init(SysadminActionServlet.java:58)
at javax.servlet.GenericServlet.init(GenericServlet.java:258)
at weblogic.servlet.internal.ServletStubImpl.createServlet(ServletStubImpl.java:700)
at weblogic.servlet.internal.ServletStubImpl.createInstances(ServletStubImpl.java:643)
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:588)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:2
221)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:
2165)
at weblogic.servlet.internal.HttpServer.preloadServlets(HttpServer.java:475)
at weblogic.servlet.internal.WebService.preloadServlets(WebService.java:450)
at weblogic.t3.srvr.ServletInitRunner.run(ServletInitRunner.java:49)
at java.lang.Thread.run(Thread.java:484)
>
javax.servlet.ServletException: Servlet class: 'com.mediaocean.struts.SysadminActionServlet'
could n
ot be handled by the ClassLoader
at weblogic.servlet.internal.ServletStubImpl.prepareServlet(ServletStubImpl.java:622)
at weblogic.servlet.internal.WebAppServletContext.preloadServlet(WebAppServletContext.java:2
221)
at weblogic.servlet.internal.WebAppServletContext.preloadServlets(WebAppServletContext.java:
2165)
at weblogic.servlet.internal.HttpServer.preloadServlets(HttpServer.java:475)
at weblogic.servlet.internal.WebService.preloadServlets(WebService.java:450)
at weblogic.t3.srvr.ServletInitRunner.run(ServletInitRunner.java:49)
at java.lang.Thread.run(Thread.java:484)Let me help you....
I had several drivers and programs giving issues too
As usual, M$ is sooo stupid to do things without asking anybody if you want them.
That is why SP2 is causing soooo much trouble when it doesn't have to....
The thing is that SP2 not only let you use the NX-bit, BUT there is something else.
In order to use the NX-bit, the OS needs to use PAE (Psycal Address Extensions), meaning it remaps memory stuff to locations above 4GB!!!!!
On a 32Bit OS there is no need to do so, but for NX to work they must use some 64bit extensions.
Ergo, some drivers and programs don't like this and cause trouble and disabling NX (=DEP) doesn't help one bit.
The solution is to DISABLE both of them.
When you check the boot.ini you will find a param in there like: /NoExecute=OptIn
If you replace this part with: /Execute
Then WinXP will boot without DAE and DEP and should work as before.
It worked for me!!!! -
Is patching Sol 10 machines with zones safe?
Now that Sun update has been released, "smpatch update" explicitly checks for the presence of non global zones and refused to run.
Now, its fairly trival to reproduce the "smpatch update" functionality from "smpatch download" which still works and a bit of scripting.
Ive done this on a test machine with zones with no obvious ill effects.
However since Sun went to the trouble of disabling "smpatch update", you have to presume there was a good reason.
So is patching machines with zones safe. Or is there some known problem with doing this.The problem was that the underlying tool patchadd was not zones aware and then changes (I believe for bug: 6200143 ) changed the exit codes that smpatch relies on.
Now in Solaris 10 patchadd/patchrm now returns only an exit code of 1 or 0 when using zones which is insufficient both for smpatch and for the Update Manager.
So there are two options:
If the system does not have any local zones configured then you can run "patchadd -t" in transitional mode which reverts back to the old pre Solaris 10 rich return codes that smpatch needs.
If there are zones on the system, using smpatch download + patchadd will work, but you cannot get rich status from patchadd:
Running "patchadd -t" on a system with local zones gives:
# patchadd -t
Transition patching (-t option) is not supported in a zones environment.
HTH
ethan -
Why do I keep getting a Network time out message when trying to get current update on my 3GS?
Why do I keep getting, "Network timed out error", when trying to get latest update to my IPhone 3GS? Have never had trouble before.
Disable your firewall and any antivirus and similar software.
-
HP Officejet Pro 8600 Freezes constantlys
Hello, A week ago, we bought an Officejet Pro 8600 and set it up to connect wirelessly. All was working well for several days. Then, slowly and with increasing frequency, the printer began simply freezing. Sometimes it would freeze with the display off (sleeping), sometimes it would freeze with the display on. This began happening more and more often. Thinking there was a problem with the printer (and the people at the Staples store where I bought it agreed), we swapped it out for another of the same model. I brought the new one home and set it all up and got it working. Within a few hours, the same thing began to happen with this one! This one now freezes every few minutes. Now, when I say freezes, I mean NOTHING responds and it simply is stuck as it was at that time. Even the power button does not respond. The only way to get it going again is to unplug it, wait 15 seconds, and plug it back in. I have downloaded and installed all new software available for both the printer and the computer required for this printer. I have the printer plugged directly into a wall socket with nothing in between. No extension cord, no power strip, no surge protector. My computer is an HP Pavilion TouchSmart All-in-One running Windows 8.1 The computer and printer are both connected to a Verizon MiFi Jetpack for internet access. They also communicate to each other through this network. My laptop also communicates fine with the printer through the Jetpack. Both the desktop and the laptop and my daughter's tablet will communicate perfectly through the printer's wifi direct, also. When the printer is not frozen, everything works flawlessly. But obviously it is something here, within this environment since this second printer is doing the exact same thing. Does anyone have any ideas?
What the HP support person is trying to get you to do is to setup a real home router to support your network. That way when your Jetpack is power cycled or leaves the network your Netgear will remain online and an continue to support your home devices. When you disable the DHCP service on the Jetpack we assume the Netgear has one of its own and will take over those responsibilities automatically. You can only have one DHCP service on a network at a time otherwise there could be IP Address conflicts. Disabling DHCP on the Jetpack should force it to behave more like a traditional modem only device where all it does is provide gateway functionality to the internet and nothing more. Should you do it? That depends on how well its working right now. Perhaps your Netgear already has this functionality built into it and will be fine. It all depends on your comfort level for configuring the home network and the performance of the Jetpack. Generally speaking its always better to be in control of something like this and designate one device to run the DHCP for your network. Any changes you make in this area will be a one time change, unless you need to reset the Jetpack which is often a common troubleshooting step. Since you are going through the trouble to disable DHCP another good tip would also be to limit the number of connections to the Jetpack by enforcing a MAC filter. With MAC filters your Jetpack will only allow the Netgear to connect to it. This forces any future devices to connect the way you want them to while in your home. Once you have MAC filtering enabled you could go one step further and configure a higher entropy WiFi password on the Jetpack. The default passwords on a Jetpack can be brute force attacked and cracked within hours. It is always a good idea to create your own custom WiFi password that uses security best practices to secure it from malicious users. Beefing up the security on your Jetpack should be manageable because from this point on all devices should be connecting through your Netgear instead, although I'd advise you do the same on that device too. Strong password best practices:http://windows.microsoft.com/en-us/windows-vista/tips-for-creating-a-strong-password How secure is your password: https://howsecureismypassword.net/(Rule of thumb is the longer the better, shoot for atleast a few years to crack) Lots of info here, hope it is useful to you. let us know if you have any other questions.
-
Outlook anywhere testconnectivity error RPC 6004 (NSPI Proxy Interface)
Greetings, community!
We have next Exchange configuration:
Exchange Server 2007 (With last RU) on Windows Server 2008R2. All roles, except Edge, are on this server.
So, we have published OWA, ActiveSync successfully through ISA Server 2004. Testconnectivity tells us that all is correct and it's true)
But we have strange problem with RPC over HTTPS:
Testconnectivity tells us:
RPC 6004 (NSPI Proxy Interface) and RPC_S_SERVER_UNAVAILABLE (0x6ba) in the details.
We have already use all receipts from http://blogs.technet.com/b/exchange/archive/2008/06/20/3405633.aspx and http://www.tech-archive.net/Archive/Exchange/microsoft.public.exchange.setup/2004-07/1151.html articles.
Enabling expert auditing of NSPI Proxy on Exchange server shows warning when Testconnectivity try to connect:
NSPI Proxy listener thread (ID: 0xfec) could not connect to the server on transport . The winsock subsystem returned error code:[0xRpc/HTTP].
RPCPING utility tells us:
Exception 1722 (0x000006BA)
Number of records is: 2
ProcessID is 6696
System Time is: 2/8/2014 13:27:0:552
Generating component is 14
Status is 0x6BA, 1722
Detection location is 1398
Flags is 0
NumberOfParameters is 2
Long val: 0x4
Long val: 0x6ba
ProcessID is 6696
System Time is: 2/8/2014 13:27:0:552
Generating component is 13
Status is 0x6BA, 1722
Detection location is 1418
Flags is 0
NumberOfParameters is 0
Out DC controllers are listening 6004 port. And Exchange server successfully connect with DC with information message:
NSPI Proxy successfully connected to the NSPI Service on server DC.FQDN.NAME at endpoint 6004 on RPC protocol sequence ncacn_http.
Additional information:
Outlook 2003/2007/2010 can't connect to our Exchange through RPC/HTTPS. But Outlook 2013 do it without any problems!
I don't know where I can continue to dig)Hi, Sathish!
Thank you for reply.
Service is started and IPv6 is disabled. Do you mean SRV-record for autodiscover? We don't use it for external users. We publish Autodiscover same way as Owa and it works correct (interconnectivity).
I enable Expert level audit for NSPI Proxy and there is error:
Source: MSExchangeSA
EventID: 9040
NSPI Proxy encountered an error while receiving a packet. The target Domain Controller or the network or a client might be down. The winsock subsystem returned the error:[0x2746]. The circuit that received this error is being closed.
But DC is online and available. I'll reboot server tonight because I think there is a little trouble after disabling additional NIC.
Maybe you are looking for
-
How to use IMAQ extract color panel in a LabView file?
I want to change a color image into a greyscale image. Therefore I want to use the function IMAQ extract color panels but I don't know how to insert it in my LabView application. Please, can anyone give me some advice ?!!! Thx, Birgit
-
Business One Client - Automating DB login..
Hi, my apologies if this is the wrong area to post this, please feel free to move to the correct section if here is incorrect. I'm wondering if anyone knows of a way to setup the SAP client so that a new user doesn't have to enter (or have entered) t
-
How to calculate this average cost ?
Hello, I've been thinking on this for problem for a while, but could not come up with a solution. In excel it is easy to do, but in SQL ? Tried with analytics but no success. I need to recalculate the AVG_PRICE when QUANTITY > 0, ie when I buy, else
-
Playing quicktime files from 1998
I have a CD with some Quicktime files on that appear to have been created in 1998. Quicktime tries to play them but I can only get sound and no picture. Any suggestions about how I can play them fully? I'm using Quicktime 7.4.1.
-
How do I fix flashing question-mark-file-icon issue on reboot?
My Mac Book Air 11" has been a bit strange recently, so I decided that a full clean would be a good idea. I had no important files I wanted to keep, so i went ahead and reinstalled the OS. Apparently that doesn't delete everything, so I did some rese