Trouble removing disabled jobs from oracle scheduler.

Hi,
When I run the query :-
select job_name,job_subname,program_name,enabled,auto_drop,state
from all_SCHEDULER_JOBS
where enabled = 'FALSE'
and state = 'RUNNING'
I get the following results :-
job_name     job_subname     program_name     enabled     auto_drop     state
DAILY_LOAD     STEP30     EQUIP_STATUS_EXECUTE_SCRIPT     FALSE     TRUE     RUNNING
WEEKLY_CHAIN_IMMEDIATE_JOB     STEP30_1     MONITOR_EXECUTE_SCRIPT     FALSE     TRUE     RUNNING
There are no entries on the 'ALL_SCHEDULER_RUNNING_CHAINS' table for these jobs.
How can I remove these jobs that are not disabled but have a state of 'running'.

Hi DomBrooks,
When I try :-
begin
dbms_scheduler.stop_job(
'WEEKLY_CHAIN_IMMEDIATE_JOB',
TRUE
end;
I get :-
ORA-27475: "XXXXX.WEEKLY_CHAIN_IMMEDIATE_JOB" must be a job
ORA-06512: at "SYS.DBMS_ISCHED", line 164
ORA-06512: at "SYS.DBMS_SCHEDULER", line 483
ORA-06512: at line 2
I get the same when I try :-
BEGIN
DBMS_SCHEDULER.DROP_JOB (
job_name => 'WEEKLY_CHAIN_IMMEDIATE_JOB');
END;
When I try :-
select job, log_user, what from user_jobs;
I get no rows returned.
From what I can tell it seems the oracle scheduler does not think the job exist even though it shows up as 'disabled' in the all_scheduler_jobs query.
I am wondering if a db recycle might fix the problem or if you have any other ideas?
I really appreciate your help.

Similar Messages

  • Remove Reschedule jobs from Developer Reports Sever 6i

    Dear All,
    Please guide me how i can remove reschedule jobs from Developer Reports 6i
    Regards
    USMAN ALI

    Install Forms in one directory (You can have reports in the same
    directory).
    Install oracle DB in another directory.
    Don't change any file and reboot.
    The listener will start automatically as a service.
    (If not from a command line write "lsnrctl start" to start it).
    To connect from forms/report to the DB you need to activate the
    sqlnet easy config tool from the directory where forms is.
    Follow the wizard to define an entry in the tnsnames.ora file
    automatically.
    Then you can use your forms with the DB.
    (IF you get problems it usually helps to let us know the error
    code you get so we can direct you in the correct direction).

  • Officejet Pro 8600 - Can't remove canceled job from print queue

    Hi there
    I canceled a print job from the print queue, but it refuses to budge! Everytime I try to remove it, I get this message:
    I can print other documents, but it's very irritating having this here all the time (and a big red blob on my dock icon announcing a phantom print job).
    Can anyone help me rid myself of this spectre of print purgatory?
    Cheers!

    Try downloading and running the HP Print and Scan doctor. This software is able to remove phantom print jobs for you automatically. The program can be downloaded from here.
    As well, for Windows based computers, restarting the computer can also help with this issue oftentimes. Hope this helps.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Hoiw to remove print job from queue?

    How can I remove a "print job" from the queue.  Selecting "cancel all printing jobs" will not remove it.  It says it is deleting, it is not doing anything.   Help please.    As long as this job is showing the printer will not print anything else.

    Hi Betty,
    Welcome to the HP Forum.
    The job queue may be stuck.
    Switch off the printer
    IF you are running a notebook, first do this:
    Create a Restore Point:   Create a Restore Point – Win7  OR  Create a restore point Win8
    Close all your programs and Shut down the computer
    Disconnect everything (little Unifier for the keyboard / external mouse can stay)
    Perform the Hard Reset for your notebook model
    Boot the computer and log in
    OR
    If you are not running a notebook, just
    Create a Restore Point:   Create a Restore Point – Win7  OR  Create a restore point Win8
    stop all your running programs, 
    shut down completely
    Boot the computer and log in
    Switch on the printer and wait until it is all back up and running.
    That probably won't fix the queue, but it will clear the rest of the cobwebs.
    Next, try this:
    Control Panel> icon view > Administrative Tools> Services>
    Click on Name to sort the column alphabetically >
    Scroll down and look for Print spooler> Highlight Print Spooler>
    Click Restart the service
    Click the Kudos Thumbs-Up to show appreciation and say Thanks.
    Although I strive to reflect HP's best practices, I do not work for HP. 
    Click Accept as Solution when the Answer is a good Fix or Workaround to your Question!
    Kind Regards,
    Dragon-Fur

  • Trouble removing a user from creative cloud for teams

    I am trying to remove a user from my team, however the X does not show the pop up menu with the option to remove them.  Also, when I click on any item on the left hand menu, nothing happens.

    Sorry... This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -start here https://forums.adobe.com/thread/1703848
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html
    --and two links which may provide more details, if the above links don't help you
    -http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

  • Having trouble removing photo albums from iPhone 4S

    I have several photo albums on my iPhone that I would like to remove, they were created after i downloaded pics from emails, the pics do not have a trash can icon for convenient deletion, I cannot see these albums on my pc when i try to access the files in regular folders (which would be nice and convenient) and I cannot access these albums in anyway through iTunes (as far as I can tell), what can I do to remove these albums I wonder?

    If you created the albums in the Photos app, then, in Album view, touch the Edit button. Any Album that you can delete will then have an "X" in the upper left corner of its album icon. Touch the "X" to delete that album.
    Other albums that were created by syncing with a PC can only be deleted by syncing with iTunes on that PC with the album unselected.

  • Remove disabled look from multilineedit.

    Hello!
    I've got some dynamic layout work to do in PB Classic. I've got some layouts which requires n amounts of checkboxes to be created. Problem is that some of these checkboxes has large amounts of texts, or at least a couple of lines.
    Since checkboxes can't have more than 1 line (as far as i can see). I need to come up with a solution that works for all cases, meaning an undefined amount of text for each checkbox which it only knows in runtime. So instead I use a MLE which I draw on top of the checkbox text. This leaves the checkbox button to be seen but with the MLE - text next to it which allows multiple lines.
    The only problem is that the MLE has different behaviours than a regular checkbox text. For example you cannot highlight a checkbox text but you can of course hightext text in an MLE. If I put enabled = false then you cannot highlight anymore but the entire MLE gets a greyed out "disabled" look both for text and background. My question is basically, is there anything I can do about the disabled look? I want it to look like it's enabled.

    Hi Lucas;
    Suggestion: I would use a DW instead with the Edit Style of radio button. Then, in each DW's column use the ELLIPSE option to truncate the text to one line each. Next, use the PowerTipText feature on each column so that the user sees the entire RB text when hovering the mouse over each RB'd column. The DW will also have no issues with a disabled look.
    Food for thought.
    Regards ... Chris

  • Scheduling a job in Oracle

    Hi ,
    how can i schedule a job from Oracle ??
    this is what i declared
    create or replace PROCEDURE myjob
    IS
    v_job number;
    begin
    dbms_job.submit(v_job,
    'PLSQL_program_I_want_to_run;',
    sysdate,
    'sysdate+1/24');
    end;
    ques :
    1. how shld i schedule it to run every 15 minutes ? i saw from somewhere that 1/144 ==> 10 minutes ? i dun quite understand
    if 1/24 equals 1 hr
    then for 15 minutes
    can i do this ((1/60)*15)/24 ??
    2. once i execute this procedure manually , it shld be running as per the next sheduled dates ?
    3. can this procedure somehow be set in such a way that if oracle db is up after being down for some reasons , this procedure can auto kickoff by itself ?
    appreciate ur advise
    tks & rdgs

    Hi,
    If you are using Oracle release 10g or higher you should be using dbms_scheduler instead of dbms_job for several reasons.
    1) Scheduling every 15 minutes is much easier with dbms_scheduler e.g.
    begin
    dbms_scheduler.create_job(
    job_name=>'myjob',
    job_type=>'plsql_block',
    job_action=>'scott.mypackage.myproc(3);',
    repeat_interval=>'freq=hourly;byminute=0,15,30,45;bysecond=0',
    enabled=>true
    2) Now that jobs have real user-specified names, killing them is easier
    exec dbms_scheduler.stop_job('myjob')
    This will run the job at X:00, X:15, X:30, X:45 as long as the database is running (even after restarts) and you can pick any job_name you want.
    This should meet all your requirements. Hope this helps.
    -Ravi

  • Windows 7, removed Administrator rights from my user with Administrator disabled..

    Windows 7, removed Administrator rights from my user with Administrator disabled..how solve without restore everything please??
    Cause drag&drop was disabling each time there was an high privilege process, I tough to fix this annoying trouble removing my user from Administrator group..in fact I fixed that situation.
    But NOW I have another serious problem: my user is not able to do nothing, and my administrator user was disabled and as only belonging to homeuser group I cannot enable it!!! In this moment I am crying because I have fear I will need to restore everything, please do you know a way to enable the administrator user again even if without admin privilege?? Do you know a software that fix it or an also not clean way to avoid a complete restore??
    Thanks in advance and ciaoo
    Fabio

    in control panel > user accounts > change account type select admin.
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Remove job in Oracle 9i

    I need to know how to remove a job through oracle enterprise manager console.
    After a Windows 2003 Server O/S crash we tried to remove an oracle job which crashed along with Windows
    The status of the job changed to "Deleting" but it does not do anything.
    We tried to remove it again , restart the server but with no results.
    Please help !

    Hi.
    Use SQLplus.
    Log in as the user that owns the job.
    exec dbms_job.remove(:jobid);
    Where :jobid is the numeric id of the job visable in OEM
    Rgds
    Ossi

  • How I run a shell script from the scheduler on 10.2.0.2.0 ?

    Hello Oracle People,
    I'd like to run a shell script from the Scheduler in my 10g database.
    Right now it is a simple shell script.
    Eventually it will wrap RMAN commands to back up my DB.
    I wrote a simple pl/sql script to create a job:
    -- cr_job10.sql
    BEGIN
    DBMS_SCHEDULER.CREATE_JOB (
    job_name => 'my_backup_job',
    job_type => 'EXECUTABLE',
    job_action => '/h/oracle/scripts/tst.sh',
    start_date => '06-SEP-07 5.33.00PM US/Pacific',
    repeat_interval => 'FREQ=DAILY',
    end_date => '08-SEP-07 4.00.00PM US/Pacific',
    enabled => TRUE,
    comments => 'My Backup Job');
    END;
    I see no errors when I run the above procedure.
    I checked DBA_SCHEDULER_JOBS and the job is in there.
    The scheduler, though, errors out with an error which I see in a trace file:
    /h/oracle/admin/orcl/bdump/orcl_j000_22396.trc
    Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
    With the Partitioning, OLAP and Data Mining options
    ORACLE_HOME = /h/oracle/product/10r2
    System name: SunOS
    Node name: sol
    Release: 5.10
    Version: Generic_118855-14
    Machine: i86pc
    Instance name: orcl
    Redo thread mounted by this instance: 1
    Oracle process number: 15
    Unix process pid: 22396, image: oracle@sol (J000)
    *** ACTION NAME:(MY_BACKUP_JOB) 2007-09-06 17:33:00.175
    *** MODULE NAME:(DBMS_SCHEDULER) 2007-09-06 17:33:00.175
    *** SERVICE NAME:(SYS$USERS) 2007-09-06 17:33:00.175
    *** CLIENT ID:() 2007-09-06 17:33:00.175
    *** SESSION ID:(140.13520) 2007-09-06 17:33:00.175
    *** 2007-09-06 17:33:00.175
    ORA-12012: error on auto execute of job 53267
    ORA-27369: job of type EXECUTABLE failed with exit code: 274662
    I googled on this:
    ORA-27369: job of type EXECUTABLE failed with exit code: 274662
    Google returned only 1 hit.
    There, I see some evidence that I need to configure something inside
    of Oracle to run shell scripts from the scheduler, but possibly just
    for machines running windows. I'm running Solaris.
    Do any of you know what I need to configure inside of Oracle to
    run shell scripts from the scheduler?
    -Owen

    Hello people,
    I should have added this bit of information:
    "The script runs fine from oracle's crontab."
    "The script runs fine from a shell owned by oracle."
    I'm getting responses telling me to check my env variables and permissions
    which would be helpful to a UNIX novice.
    I have a feeling that no one is using the scheduler to run RMAN scripts.
    Tim Hall suggested I take a close look at these files:
    $ORACLE_HOME/rdbms/admin/externaljob.ora
    $ORACLE_HOME/bin/extJob
    Currently I'm setup like this:
    bash sol root /h/oracle/product/10r2/bin 31 #
    bash sol root /h/oracle/product/10r2/bin 31 # ll $ORACLE_HOME/rdbms/admin/externaljob.ora
    -rw-r--r-- 1 root dba 52 Sep 7 15:29 /h/oracle/product/10r2/rdbms/admin/externaljob.ora
    bash sol root /h/oracle/product/10r2/bin 32 #
    bash sol root /h/oracle/product/10r2/bin 32 # cat $ORACLE_HOME/rdbms/admin/externaljob.ora
    # externaljob.ora
    run_user = rman
    run_group = rman
    bash sol root /h/oracle/product/10r2/bin 33 #
    bash sol root /h/oracle/product/10r2/bin 33 #
    bash sol root /h/oracle/product/10r2/bin 33 #
    bash sol root /h/oracle/product/10r2/bin 33 # ll $ORACLE_HOME/bin/ext*
    -rwsr-x--- 1 rman dba 30388 Sep 21 2006 /h/oracle/product/10r2/bin/extjob*
    -rwsr-x--- 1 rman dba 30392 Sep 21 2006 /h/oracle/product/10r2/bin/extjobo*
    -rwsr-x--- 1 rman dba 34468 Sep 21 2006 /h/oracle/product/10r2/bin/extproc*
    -rwxr-xr-x 1 oracle dba 300 Sep 21 2006 /h/oracle/product/10r2/bin/extusrupgrade*
    bash sol root /h/oracle/product/10r2/bin 34 #
    bash sol root /h/oracle/product/10r2/bin 34 #
    bash sol root /h/oracle/product/10r2/bin 34 #
    On my system, the user 'nobody' has no shell so I cannot use nobody.
    I created a user named rman:
    bash sol root /h/oracle/product/10r2/bin 34 #
    bash sol root /h/oracle/product/10r2/bin 34 #
    bash sol root /h/oracle/product/10r2/bin 34 # su - rman
    Sun Microsystems Inc. SunOS 5.10 Generic January 2005
    $
    $ id
    uid=220(rman) gid=220(rman)
    $
    $
    $ date
    Fri Sep 7 16:30:03 PDT 2007
    $
    $
    Jared points out that rman needs access to extproc:
    $ ls -la /h/oracle/product/10r2/bin/extproc
    -rwsr-x--- 1 rman dba 34468 Sep 21 2006 /h/oracle/product/10r2/bin/extproc
    $
    $
    Here is a demo of rman running his script:
    bash sol root /h/oracle/product/10r2/bin 35 # su - rman
    Sun Microsystems Inc. SunOS 5.10 Generic January 2005
    $
    $
    $ ls
    scripts
    $
    $
    $ scripts/tst.sh
    $
    $
    $ cat scripts/tst.sh
    #! /bin/sh
    /usr/bin/date > /tmp/tst.sh.out.txt 2>&1 &
    exit 0
    $
    $
    $ cat /tmp/tst.sh.out.txt
    Fri Sep 7 16:31:23 PDT 2007
    $
    $ rm /tmp/tst.sh.out.txt
    $
    I am focused on this error:
    ORA-27369: job of type EXECUTABLE failed with exit code: 274662
    And I am focused on this exit code: 274662
    What does 274662 mean?
    If the Scheduler gives me an error like "274662" rather than some English,
    it's obvious to me the Scheduler is a POS and I should not use it.
    And of course,
    If I cannot run RMAN from Oracle Scheduler, I'll use cron.
    -Owen

  • Removing a job - user_jobs x user_objects

    Hi everyone,
    I have a doubt about removing a job. Using a script, I removed (almost) all objects of the database. But, querying the user_objects I found one register where the object_type column value is JOB, and in the user_jobs doesn't have any register.
    The questions are: 1) Why the table user_objects is not empty? 2) How can I actually remove this job from the database?
    Very thanks in advance.

    Answering my own question:
    1) The JOB is in the user_objects table because it was still scheduled (user_scheduler_jobs), so even when it is removed from user_jobs it still exists in user_objects.
    2) To remove --> exec DBMS_SCHEDULER.DROP_JOB('JOB_NAME');
    Thanks.

  • Can I schedule COBOL program directly through oracle scheduler

    Hi,
         I am scheduling a SHELL SCRIPT through scheduler, the shell script executes COBOL program internally.
    Can I schedule COBOL program directly through oracle scheduler
    Thanks,
    Nagaraju A.

    Hi,
    if your Shell script-cobol is runing without error, you can call from Oracle scheduler.
    Regards

  • How to remove scheduled jobs from Control Center?

    Hi,
    My control center shows a bunch of jobs in the "scheduled" tab that no longer exist.
    They do not exist in Control Center and they also do not exist in the Design Center anymore.
    Is there a way I can delete entries from the list of schedule jobs?
    I am on OWB 10gR2
    Thanks,
    Sam
    PS, I saw this thread that talks about my problem. However the solution provided seems to only work if the jobs still exist
    in your control and design centers.
    OWB 11g  Control Centre, Want to Remove Schedule Jobs list

    Could it be that some process flows are still attached to a schedule? Perhaps you've made a copy of a Process Flow?

  • Capture DDL for Oracle Scheduled Jobs and job from DBMA_JOBS

    I have trying at this for while and now I am stuck...so I need some help or advice.
    I am doing a DB migration and I need to capture the DDL for all Oracle Scheduled Jobs as well as DBMS_JOBS. Anyone have a good way?
    I took a datapump export last week. Can I run a impdp and capture the DDL for this VIA the sqlfile parameter? If so, how? What would be the script for it. Something like this maybe (par file)?
    directory=DP_IMPORT
    DUMPFILE=dump1.dmp
    SCHEMAS=A,B,C...X,Y,Z
    LOGFILE=JOBS.LOG
    EXCLUDE=TABLE,INDEX,CONSTRAINT
    PARALLEL=4
    INCLUDE=JOBS
    ????

    Hello,
    It's JOB, see following table for possible options , I recommend you to read throught this thoroughly before starting.
    http://download.oracle.com/docs/cd/B19306_01/appdev.102/b14258/d_metada.htm#BGBIEDIA
    Regards

Maybe you are looking for