Trouble with detectin IDS Eagle capture device with JMF

Hi
I'm having trouble detecting my capture card (IDS Eagle model). Is anyone else having the same problem? I tried using the JMStudio tool but the only capture devices detected are the audio ones.
I have installed the WDM driver for this card but jmf doesn't detect it.
Any help will be appreciated. Thank yoU!

Hello Tania,
I think if you look at the source code for AVTransmit2.java, which can be downloaded, this will help you. Make sure you use javasound://8000 as one of the parameters when creating the AVTransmit2 object.
Regards,
James

Similar Messages

How detect capture device without jmf&java client pc ??

hi...
a computer install jmf & java => detect catpure device
but... no detect capture device without jmf & java clientpc...
however solved this problem?
plz...
thanks..
email : [email protected]

You must hard code a dependent platform code to examine the registry or its similar in linux.

Troubles with Tribbles! ... er I mean Trouble with JMF

Recently downloaded JMF and updated my classpath for both
JMFHOME=C:\JMF2.1.1
CLASSPATH=%JMFHOME%\lib\jmf.jar;.;%CLASSPATH%But, my Eclipse IDE does not want to recognise the javax.media library... any ideas?

Huh... didn't know that. Is that because it doesn't require the JDK to run apps through Eclipse? Why does Eclipse ignore the system classpath?When Eclipse is launched, it defines its own classpath, which does not include a user's system classpath. Equivalent behavior is seen with the use of the -classpath flag with java and javac, where defining a classpath at startup disables the automatic inclusion of the system classpath. This helps reduce library conflicts.
How might I go about doing so? This is a new concept for me.[Eclipse docs - Java Build Path Page|http://help.eclipse.org/help33/index.jsp?topic=/org.eclipse.jdt.doc.user/reference/ref-123.htm]
You may also be interested in [How Classes are Found|http://java.sun.com/javase/6/docs/technotes/tools/findingclasses.html] and the [Javapedia: Classpath|http://wiki.java.net/bin/view/Javapedia/ClassPath].
~

Detecting capture device

Hi
How can i detect a capture device in jmf ?
Is there any listener for this which will raise an event when a new device is
plugged in while my application is running ?
Thank you

public Vector deviceList;
public CaptureDeviceInfo di;
deviceList = CaptureDeviceManager.getDeviceList(new (AudioFormat.LINEAR,44100,16,2);
for(int i = 0; i<deviceList.size(); i++)
di = (CaptureDeviceInfo)deviceList.firstElement();
}

Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
# dmesg
[ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
[ 3433.781119] media: Linux media interface: v0.10
[ 3433.809842] Linux video capture interface: v2.00
[ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
[ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[ 3433.835976] usbcore: registered new interface driver uvcvideo
[ 3433.835977] USB Video Class driver (1.1.1)
Unfortunately, *most of the time* the camera seems invisible to my system, and I get
# lsusb
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 8087:07dc Intel Corp.
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
# dmesg
[ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
[ 480.171097] usb 3-1.3: device descriptor read/64, error -32
[ 480.341235] usb 3-1.3: device descriptor read/64, error -32
[ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
[ 480.578007] usb 3-1.3: device descriptor read/64, error -32
[ 480.748151] usb 3-1.3: device descriptor read/64, error -32
[ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
[ 481.325196] usb 3-1.3: device not accepting address 6, error -32
[ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
[ 481.798926] usb 3-1.3: device not accepting address 7, error -32
[ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
Anyway, such a hack is unacceptable... So, my questions are:
is it indeed related to overcurrent protection ?
is there anything else I can try ?
should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
Last edited by $nake (2014-10-18 16:29:06)

uname -a
Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
pacman -Qi linux
Name : linux
Version : 3.9.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licences : GPL2
Groups : base
Provides : kernel26=3.9.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
Required By : nvidia
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 65562.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 25 May 2013 16:28:17 CEST
Install Date : Sun 02 Jun 2013 15:30:35 CEST
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature

Capturing Troubles with Premiere Pro CS5.5

Hello!
I am fairly new to Premiere and I'm having a little trouble with the capturing option.
I have Premiere Pro CS5.5, a MacBook Pro (13 inch), a Sony HDR-CX 110 camera connected to the MacBook with an HDMI cable and a HDMI displayport adapter.
I think I have everything I need to get it connected but it seems that whenever I select capture the window that pops up tells me that my device is offline.
I have a 13 inch MacBook Pro. I bought it in August of 2010. I have a Sony HDR-CX 110 camera. I have it hooked up to a HDMI Displayport adapter via a HDMI cable and the camera is plugged into the wall and turned on playback mode. I know the displayport works because I have a dual monitor set up and the adapter works because I have connected my TV to my Mac so there should be nothing wrong with the adapters and ports. But for some reason the camera doesn't appear to show up whenever I try to do this capturing option.
The camera's box does say "compatible with iMovie" and I have been able to import footage I collected without the camera plugged in to the computer, such as a guitar performance and an interview. That process was pretty simple and was connected to my computer via a USB.
Now, I think that maybe I'm just trying to do something more advanced with the camera and the camera can't do it. But if I am wrong (and I hope I am) I don't where to go from here? Any help would be so greatly appreciated!
Thank you =)

That will only work if your camera HAS a firewire connection... I think for Mac it is call iLink, but since I'm Win I'm not sure about that
Just do what was said and copy the folder to your hard drive and import from there

Trouble with audio devices

I wrote a simple Java application to record audio on some mixer and then play it back. With my headphones / microphone connected, I got the following list of mixers:
1. Primary Sound Driver : Direct Audio Device: DirectSound Playback
2. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Playback
3. SoundMAX HD Audio : Direct Audio Device: DirectSound Playback
4. Primary Sound Capture Driver : Direct Audio Device: DirectSound Capture
5. Microsoft LifeChat LX-3000 : Direct Audio Device: DirectSound Capture
6. SoundMAX HD Audio : Direct Audio Device: DirectSound Capture
7. Java Sound Audio Engine : Software mixer and synthesizer
8. Port Microsoft LifeChat LX-3000 : Port Mixer
9. Port SoundMAX HD Audio : Port Mixer
Of these, mixers 2, 5 and 8 are not available when the headphones are detached, as expected.
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audiio when a microphone is connected? If it is, how?

Uncle_Sam wrote: I wrote a simple Java application to record audio ..
There is no simple way to record sound in Java, AFAIU.
Uncle_Sam wrote: ...on some mixer and then play it back. ...
Now my problem is that when the headphones are not connected, any audio being played out through the sound card can be recorded through mixers 4 and 6 above. This includes sounds created by the operating system, any audio files being played out etc. However, when I connect my headphones, the audio at the microphones can be recorded through mixers 4 and 5 above but any audio produced by the computer (again, sounds produced by the OS, audio files being played out etc.) cannot be recorded at any mixer. I tried mixer 6 above without success.
Is it not possible to record computer audio when a microphone is connected? If it is, how?
Significant question. Are you interested in getting this code to work for the machine you sit in front of, or is this for 'the general end user'?
I have no general solution for the latter, but for a single machine, installing an 'audio loop-back' (either software or hardware) might be the answer. That is the most intelligent thing I can offer that might help get around this problem.
(Note, also posted as ) [Trouble with audio devices|http://groups.google.com.au/group/comp.lang.java.programmer/browse_frm/thread/9983c6cd3e8204fd/e40278adaa2854cf] on usenet newsgroup comp.lang.java.programmer, and no, I personally do not consider that to be either a cross-post or multi-post (if anyone is interested in my opinion!).

Edge Animation having troubles with iOS devices within Muse Site

Hi All! I've been creating a mobile version of my website www.rinkdesigns.com and have it all complete. I created an animation/navigation bar within Adobe Edge Animate and imported it into Muse. It functions AMAZINGLY on my Nexus 4 (Android) in Chrome but on a buddies iPhone 5 Chrome only loads about 3/4 of the animation/nav bar, in Safari the animation does not load at all and half of the page background does not load either. Please check out the preview site here http://rinkdesignsmobile.businesscatalyst.com/phone
Has anyone else been having animation/mobile troubles with iOS devices? Any hints as to how you fixed your errors would be extremely helpful! I also posted this question in the Muse forum and haven't gotten a response...
Thanks,
John

Or, how about this:
Does anyone know how to have Edge Animate objects that utilize "_top" in an open url trigger make the Muse site that they are a part of open a new window/tab with that action (as opposed to having it open the url in the current page, or using "_blank" in the trigger)?

Trouble with my Apple ID on multiple devices

I am having trouble with my Apple ID when downloading app updates. I go to update my Apps, but the Apple ID for a seperate iPod, that I also sync with this computer, is what appears when the password is requested. I checked the account in Settings > Store and it is the correct one. But everytime I attempt to update my Apps, it has the iPod's Apple ID, which is my father's Apple ID.
In short, when I try to update an app on my iPhone, my Apple ID is not displayed, but my father's iPod Apple ID is displayed with a request for the password. I am not sure what I am doing wrong, but I would appreciate your assistance.

Ok, so you want to remove data (contacts, bookmarks, calendar etc) from other users from your iCloud/Apple ID?
If you want to use your ID for your family because it is the account everybody uses to buy stuff then you only need to ensure that your apple ID is set up in the store (settings-store) and then the users of each device and put their own apple ID in icloud/message/facetime/etc.
To set up your device, in my opinion, it is best to back up to itunes, and then plug your new device into itunes and "set up as ..." and select the backup from your device. This will import all your data/settings and your new device will be set up just like your old one.
I am not certain about using the same payment method for more than one account.

Adobe premiere elements 12 with diamond vc500 one touch video capture device.

Adobe premiere elements 12 and using Diamond vc500 one touch video capture device.
AVI files will not load into Adobe premiere elements 12.
I bought what I thought were the two best software and capture devices.
I am archiving old VHS tapes and using Diamond vc500 capture software called EZ grabber. I thought the best archiving format would be AVI files. As I just started this project. I am willing to do what is needed.
That even being, going and buy another capture device that being for a VCR to PC using a USB are even a Video card.
EZ grabber software ask you to record in what format. I picked AVI. There is DVD - SVCD - VCD - MPG4. I want to archive then go back and edit. The DVD or SVCD format, is that not the same as mpeg 2?
You and I know the drill. Saving in what long term archive format and that dare thing about video compression and losing quality of the videos. Its all a nightmare.
Once again I am willing to buy another capture device for a VCR that will work with Adobe premiere elements 12.
Help please with long term archiving format and capture device.
Thanks

The answer is B.
Capturing the VHS content to computer (via the Diamond vc500 and USB connection and EZ grabber) to obtain an .avi file on your computer and then trying to import that into Premiere Elements with its Add Media/Files and Folders?
When I do that, the Adobe premiere elements 12 crashes or only loads a 2 mins of video.
The firewire connection device "Canopus" product sounds great. But I really don't want to spend that much on my home videos. My PC does not have a Firewire connection. So add a new card for that and the Canopus product. I could just pay someone to do my VHS tapes.
Diamond vc500 $35
Adobe premiere elements 12 $65
Firewire card $50 plus
Canopus $180
$330 is way too much for simple home VHS videos

Can't get driver to work with ezcap usb 2.0 video capture device on windows 8.1

I have an ezcap video capture device that works fine on my windows 7 machine but will not work in windows 8.1. The software (arcsoft 3.5) functions properly but will not let me select the video grabber as a source. The driver itself indicates not compatible with 8.1 and the there are no drivers out there that I can find to address this issue? Any known solution would be helpful.

Hi,
It is not from HP. Please try driver from the following link:
http://www.ezcap.tv/ezcap116-drivers?zenid=r53fvgj1n510tdme9itqc9ql52
(After the first screen shot).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

I'm looking for a capture device that is compatible with Adobe Flash Media Live Encoder. I bought elgato but it is not compatible. Anyone know?

This is just a shot in the dark....
Do you have all your devices hooked up (and on) when you launch FMLE? For example -- your camera or digitizer? When FMLE launches it will try to launch with the last known settings... including input devices. If it can't find these devices (they're not hooked up and on) it can crash, although in most situations it will simply show a default screen with default settings.
If you do have your equipment hooked up (and on) when you launch FMLE, try unplugging them and then launching FMLE so that it opens up in default configuration mode (no input devices selected; all default settings). Then uncheck the "preview" boxes for both your input and output preview windows. Close FMLE and then plug in your equipment (and turn it on) and relaunch FMLE. I offer this suggestion as FMLE can sometimes act funny when the preview windows are open with certain types of input devices. Don't worry -- you don't have to keep the preview windows off forever. If you can get FMLE to successfully launch with the preview windows off, then you can set your settings however you like and save the profile. Then quit and relaunch FMLE and then turn the preview windows back on and see if it works. If it does, great. Just be aware that making any settings changes while the preview windows are open could result in FMLE crashing. Again -- this only happens with some capture devices, such as certain Dazzle capture boxes.
If none of this works, you could always try to upgrade to FMLE 3.2 and see if that solves your problem.

Trouble with Boot Device

I'm having some trouble with boot devices on my Neo Plat and I hoped someone here might have a fix.
I recently installed a new hard-drive as C. I've gone into Bios/Advanced Features and set the boot order to the following:
Hard Drive
CD-ROM
Floppy
When I reboot now I get the message "Booting from CD" which it can't do because there is no bootable CD-ROM present. I then get a message like "No Boot Device Present" and the system halts.
The strange thing is that if I select F11(Select Boot Device) at the BIOS test screen and select Hard Drive and then my C: Drive it boots just fine from that drive! But it will not do this automatically.
Anyone know what the problem might be?

F11 is pr. boot only .
Need to be in the bios ..
You need to go into "hd boot priority" submenu in advanced features menu and set/save the HD order there . (number three from the top)
Toggle the boot drive from pos 1. to 2. in the list and back to pos 1.
Then save the bios and exit .

I just uploaded the latest IPad software to my IPad and am now having loads of trouble with the device recognizing "online buttons", that is, links, etc.

I just uploaded the latest IPad software to my IPad and am now having loads of trouble with the device recognizing "online buttons", that is, links, etc. what can I do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

Switched from a PC to a MBP, having trouble with iTunes syncing iPhones, iPods. Devices are still linked to the PC ?

Switched from a PC to a MBP, having trouble with iTunes syncing iPhones, iPods. Devices are still linked to the PC. How do I undo the PC link without a restore / reformat?

Post in the iTunes forum:
https://discussions.apple.com/community/itunes
Read:
http://www.apple.com/support/switch101/
http://www.macworld.com/article/1153952/superguide_switchingtoamac.html

Trouble with detectin IDS Eagle capture device with JMF

Similar Messages

Maybe you are looking for