Trouble with ebay

Major problems with eBay using Firefox -
error message =forbidden
or sends me to Chinese site
have had multiple problems accessing eBay with Firefox
No problems with Explorer - prefer Firefox though

Do a malware check with some malware scanning programs on the Windows computer.<br />
You need to scan with all programs because each program detects different malware.<br />
Make sure that you update each program to get the latest version of their databases before doing a scan.
*http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
*http://www.superantispyware.com/ - SuperAntispyware
*http://www.microsoft.com/security/scanner/en-us/default.aspx - Microsoft Safety Scanner
*http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
*http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
You can also do a check for a rootkit infection with TDSSKiller.
*http://support.kaspersky.com/viruses/solutions?qid=208280684
See also:
*"Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

Similar Messages

  • Trouble with ebay and yahoo!

    On an ebay auction page the main pic loads briefly, then is replaced by a spinning circle of dots.
    On yahoo sports, when I click on story headlines nothing happens.

    Hi Louise,
    Can you tell us a bit more about the issue? For example...
    1.) Exactly what version of OS X are you running.
    2.) What browser are you using and what is the browser's version.
    3.) Have you tried a different browser.
    4.) Is it only these two websites.
    Thanks!

  • Safari doesn't work properly with Ebay

    Safari doesn't work properly when listing items on Ebay. Fix it.

    Hi Occo
    I would rather Apple updates Safari
    Then tell Apple, this a user to user forum, although I don't think Apple will update just for your problem as hardly anybody is experiencing the same issue, just a couple on this troubleshooting forum.
    this IS NOT A EBAY PROBLEM
    Please don't use all caps, it is considered shouting. No this may well not be an ebay problem, but it is not a Safari issue either, it is an issue on your Safari and on your computer. Everyone I know has no trouble with ebay at all. In fact Safari 4.0.4 has made it even faster to log in and browse, buy etc.
    id rather apple fixed their software
    Again, tell Apple, not us, through the Apple feedback page or file a bug report. They will update Safari if and when they decide, but it will not be to fix what is not broken.
    Im sure there would be similiar sites that arent compatible with safari
    I agree, as stated before that some sites are just lazy in updating their coding, usually not the high traffic sites though. Other sites only update their code for Windows IE and forget the rest of the world. Firefox, Opera, Camino etc. also can't access some sites.
    So in conclusion, try Safari and OSX maintenance and if that fails, then try an archive and install. Because there is nothing wrong with Safari 4.0.4 and ebay, or else this forum would be inundated with thousands upon thousands of users complaining and that is not the case.
    Cheers and Good Luck

  • I'm having trouble with certain buttons on the Ebay pages.

    I'm having trouble with certain buttons on the EBay pages. Like enlarge, other pictures,add to my watch list, etc. this happened after I upgraded to 8.0. I have tried to upgrade java but the java console will not work ?? tried all this in my other browser and all works fine. What do I do? Thanks

    If it happens again then try to reload the website or clear the cache and the cookies from that website.
    Reload web page(s) and bypass the cache.
    * Press and hold Shift and left-click the Reload button.
    * Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    * Press "Cmd + Shift + R" (MAC)
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    *http://support.mozilla.com/kb/Deleting+cookies
    *http://support.mozilla.com/kb/How+to+clear+the+cache

  • I am having problems using Firefox with Ebay in the last 10 days. The advanced search link is dropping off the page and there is no way to access it now.

    I have been using Firefox and Ebay for at least 12 years with no problems whatsoever. But in the last 10 days I have been having trouble with the Advanced Search link disappearing from the page on Ebay. If I do a search from the Ebay home page it will show the results, but the Advanced Search link (in blue letters) which always used to appear to the right of the Search button is gone. If I click Search again at this point I can see the Advanced Search link appear for a millisecond, but then disappear just as quickly. Also, if I refresh the page the same thing happens. I tried to duplicate this problem with Internment Explorer and it didn't occur, so it appears to be Firefox that is causing this issue. Of course when I contacted Ebay they told me my problem was that I wasn't using Internment Explorer! I love Firefox and do not want to switch!

    You can try to clear the cache and cookies to see if that makes a difference:
    <h3>Clearing Cache</h3>
    #Go to Firefox > History > Clear recent history or (if no Firefox button is shown) go to Tools > Clear recent history.
    #Under "Time range to clear", select "Everything".
    #Now, click the arrow next to Details to toggle the Details list active.
    #From the details list, check ''Cache'' and uncheck everything else.
    #Now click the ''Clear now'' button.
    <h3>Clearing Cookies</h3>
    #Go to Firefox > Tools > Privacy > Remove Individual Cookies
    #Find the site (ebay.com) that's having problems and clear all cookies.
    #Restart Firefox
    Further information can be found in the [[Clear your cache, history and other personal information in Firefox]] article.

  • Trouble with my ipod mini

    after a month of having my ipod mini. I've been having trouble with it, since I had a 15gb before. I know that this is unusual. for instance, a week ago my ipod wasn't responding at all, dead as can be. then I hooked it up to my computer and proof! the Mac icon is showing. now a couple of days ago, it happened again. but this time nothing is working, what can I do?

    The most likely cause is a worn out battery that cannot hold a charge.  When it is connect to USB, it gets power from that connection so it works as expected.  When you disconnect it, the battery cannot hold the charge for more than a few seconds, and it dies.
    Having the battery replaced by a shop is likely to not be economical for an old iPod mini, compared to the current gen 16GB iPod nano that is available on the Apple refurb page for $99
    http://store.apple.com/us/browse/home/specialdeals/ipod
    If you are good at fixing small electronic devices, this web site has repair guides
    http://www.ifixit.com/Device/iPod_Mini
    (It is not designed to be taken apart by the user.)
    The part is available on eBay and other online sources. 
    NOTE:  The tiny hard drive in the iPod mini is supposedly compatible with a standard compact flash card, including much higher capacity than 4GB.
    http://www.instructables.com/id/Upgrade-Your-iPod-Mini-With-Flash-Memory---No-Mo re/

  • Problems with ebay app since updating to new i Phone layout.

    I updated the softwear on myI phone today and i am having trouble with my ebay app which i didnt have with the old version. When i browse through ebay and attempt to look at an item thats for sale it does not allow me to browse the photos only the first one .the screen also looks all squashed together it is alsnnot allowing me to look at any bids that have been made or how many views any of my items have had. Any suggestions or can someone tell me how to reinstall the old settings on my I phone back ....thank you

    Hello KevHendren,
    Thank you for using Apple Support Communities!
    I would start with the troubleshooting outlined in this article named:
    iOS: Troubleshooting apps purchased from the App Store
    http://support.apple.com/kb/TS1702
    1. Update your device software
    Update your device to the latest version of iOS.
    2. Check for app updates
    You can setup apps to update automatically in Settings > iTunes & App Store, but make sure that your apps are up to date:
    Open the App Store and tap Updates. If updates are available, tap Update All.
    If  prompted, enter your iTunes Store account information. App Store will then download and install the app updates.
    Note: Some apps may require a Wi-Fi connection to update.
    3. Install another app from the App Store
    If none of your user-installed apps will launch, there could be an issue with Apple ID authorization. Download and install an app that isn't already installed on your device to reset this information. You can also remove an app from your iOS device and download it again from the App Store or sync the app from your computer.Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
    4. Restart the app
    If the issue affects only a single app, try closing just that app.
    5. Restart your device
    Turn the device off and on.
    6. Reinstall the affected app
    Remove the app from your device and reinstall it:
    Tap and hold any app icon on the Home Screen until the icons start to wiggle and show a small "x" in the top-right corner of the app.
    Tap the "x" in the corner of the app you want to delete.
    Tap Delete to remove the app and all of its data from your device.
    Press the Home button.
    Go to the App Store.
    Search for the app and then download it again.
    Note: If it is a paid app, ensure you are using the iTunes account you purchased the app with originally. If it is not, you may be asked to purchase the app again. Learn more about downloading previously purchased items.
    7. If the issue is still unresolved, contact the developer
    If you continue to experience the issue, contact the developer of the app for further assistance:
    Find the app in the App Store.
    Open the app's page, tap Reviews, and then App Support.
    Take care,
    Sterling

  • I have been having a lot of trouble with the latest itunes update and my ipod classic 80Gb i.e. being unable to sync songs, but now i have no files at all on my ipod, it is completely blank when i view it from my computer. I need help, please, anybody.

    As it says above, i have been having a lot f trouble with my ipod classic and the latest itunes update, i was unable to sync songs or anything to it and have tried every conceivable 'fix' i could find. i have run an itunes diagnostic and the results are posted below. a major problem is that when i try and view my ipod through my computer it displays nothing at all on the ipod, no files or anything, this may be the problem but i have no idea how it has happened or how i could resolve it.
    This ipod holds huge sentimental value and i am loathe to buy a new one! If anybody can help it is greatly appreciated, than kyou in advanced.
    Microsoft Windows 7 x64 Home Premium Edition Service Pack 1 (Build 7601)
    ASUSTeK Computer Inc. K50IJ
    iTunes 11.1.5.5
    QuickTime not available
    FairPlay 2.5.16
    Apple Application Support 3.0.1
    iPod Updater Library 11.1f5
    CD Driver 2.2.3.0
    CD Driver DLL 2.1.3.1
    Apple Mobile Device 7.1.1.3
    Apple Mobile Device Driver 1.64.0.0
    Bonjour 3.0.0.10 (333.10)
    Gracenote SDK 1.9.6.502
    Gracenote MusicID 1.9.6.115
    Gracenote Submit 1.9.6.143
    Gracenote DSP 1.9.6.45
    iTunes Serial Number 0038B8600B98D1E0
    Current user is not an administrator.
    The current local date and time is 2014-03-21 16:52:39.
    iTunes is not running in safe mode.
    WebKit accelerated compositing is enabled.
    HDCP is not supported.
    Core Media is supported.
    Video Display Information
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    Intel Corporation, Mobile Intel(R) 4 Series Express Chipset Family
    **** External Plug-ins Information ****
    No external plug-ins installed.
    Genius ID: 2fd81a1f13cf3ff25a8b4f0e8e725116
    **** Device Connectivity Tests ****
    iPodService 11.1.5.5 (x64) is currently running.
    iTunesHelper 11.1.5.5 is currently running.
    Apple Mobile Device service 3.3.0.0 is currently running.
    Universal Serial Bus Controllers:
    Intel(R) ICH9 Family USB Universal Host Controller - 2934.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2935.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2936.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2937.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2938.  Device is working properly.
    Intel(R) ICH9 Family USB Universal Host Controller - 2939.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293A.  Device is working properly.
    Intel(R) ICH9 Family USB2 Enhanced Host Controller - 293C.  Device is working properly.
    No FireWire (IEEE 1394) Host Controller found.

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • Trouble with Toshiba built-in webcam: "unable to enumerate USB device"

    I am running archlinux on a Toshiba Satellite L70-B-12H laptop, and having troubles with the Webcam. *Once in a while*, everything goes well and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 004: ID 04f2:b448 Chicony Electronics Co., Ltd
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    # dmesg
    [ 3433.456115] usb 3-1.3: new high-speed USB device number 4 using ehci-pci
    [ 3433.781119] media: Linux media interface: v0.10
    [ 3433.809842] Linux video capture interface: v2.00
    [ 3433.826889] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b448)
    [ 3433.835893] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
    [ 3433.835976] usbcore: registered new interface driver uvcvideo
    [ 3433.835977] USB Video Class driver (1.1.1)
    Unfortunately, *most of the time* the camera seems invisible to my system, and I get
    # lsusb
    Bus 004 Device 002: ID 8087:8000 Intel Corp.
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 003: ID 8087:07dc Intel Corp.
    Bus 003 Device 002: ID 8087:8008 Intel Corp.
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    (note the missing "04f2:b448 Chicony Electronics Co., Ltd" device), and
    # dmesg
    [ 480.104252] usb 3-1.3: new full-speed USB device number 4 using ehci-pci
    [ 480.171097] usb 3-1.3: device descriptor read/64, error -32
    [ 480.341235] usb 3-1.3: device descriptor read/64, error -32
    [ 480.511375] usb 3-1.3: new full-speed USB device number 5 using ehci-pci
    [ 480.578007] usb 3-1.3: device descriptor read/64, error -32
    [ 480.748151] usb 3-1.3: device descriptor read/64, error -32
    [ 480.918282] usb 3-1.3: new full-speed USB device number 6 using ehci-pci
    [ 481.325196] usb 3-1.3: device not accepting address 6, error -32
    [ 481.392091] usb 3-1.3: new full-speed USB device number 7 using ehci-pci
    [ 481.798926] usb 3-1.3: device not accepting address 7, error -32
    [ 481.799166] hub 3-1:1.0: unable to enumerate USB device on port 3
    Searching on the web, most results I found lead to this page, where it is said that the problem is due to badly tuned overcurrent protection, and advocated that unplugging and switching off the computer for a little while gets things back into normal. This does not really work for me; the problem seems to occur more randomly, unfortunately with high probability (my camera is available after less than one boot out of ten).
    I tried to ensure that the ehci-hcd module is loaded at boot with the ignore-oc option (with a file in /etc/module-load.d/), to no avail.
    I also wrote a script which alternatively removes and reloads the ehci-pci driver until my device is found in lsusb. It is sometimes helpful, but usually not. And even when my device is found that way, it can only be used for a while before disappearing again.
    Anyway, such a hack is unacceptable... So, my questions are:
    is it indeed related to overcurrent protection ?
    is there anything else I can try ?
    should I file somewhere an other of the numerous bug reports about "unable to enumerate USB device" already existing ?
    If of any importance, I am running linux 3.15.7, because at the time I installed my system, I couldn't get the hybrid graphic card Intel/AMD working under 3.16.
    Last edited by $nake (2014-10-18 16:29:06)

    uname -a
    Linux libra 3.9.4-1-ARCH #1 SMP PREEMPT Sat May 25 16:14:55 CEST 2013 x86_64 GNU/Linux
    pacman -Qi linux
    Name : linux
    Version : 3.9.4-1
    Description : The linux kernel and modules
    Architecture : x86_64
    URL : http://www.kernel.org/
    Licences : GPL2
    Groups : base
    Provides : kernel26=3.9.4
    Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
    Optional Deps : crda: to set the correct wireless channels of your country
    Required By : nvidia
    Optional For : None
    Conflicts With : kernel26
    Replaces : kernel26
    Installed Size : 65562.00 KiB
    Packager : Tobias Powalowski <[email protected]>
    Build Date : Sat 25 May 2013 16:28:17 CEST
    Install Date : Sun 02 Jun 2013 15:30:35 CEST
    Install Reason : Explicitly installed
    Install Script : Yes
    Validated By : Signature

  • Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hi, i am having trouble with my mac mail account, i cannot send or receive any emails because of the server connection problems. Message says it could not be connected to SMTP server. Thanks in advance for your help.

    Hello Sue,
    I have an iPad 3, iPad Mini and iPhone 5S and they are all sluggish on capitalisation using shift keys. I hope that Apple will solve the problem because it is driving me crazy.
    I find using a Microsoft Surface and Windows 8 phone, which I also have, work as well as all the ios devices before the ios 7 upgrade.
    It has something to do with the length of time that you need to hold the shift key down. The shift key needs to be held longer than the letter key for the capitalisation to work. For some reason, this is a major change in the way we have learnt to touch type on computers. I am having to relearn how to type!
    Michael

  • Trouble with OR in where clause

    Hello,
    I'm having trouble with execution speed. The problem seems to be with using OR in my where clause.
    Here's the meat of the function where i_pledge_number is an input parm:
    BEGIN
    SELECT /*+ INDEX (pp) */ SUM(pp.prim_pledge_amount)
    INTO return_amount
    FROM
    primary_pledge pp
    WHERE
    -- Get total if multiple allocations
    pp.prim_pledge_number IN
    (SELECT pc.pledge_number
    FROM pledge_codes pc
    WHERE pc.pledge_code_type = 'M'
    AND pc.pledge_code = 'AC'
    AND lpad(pc.pledge_comment,10,'0') = i_pledge_number)
    -- Get total if single allocation
    OR pp.prim_pledge_number = i_pledge_number;
    RETURN return_amount;
    END;
    If I comment out either half of the OR statement (either the subquery or the pp.prim_pledge_number = i_pledge_number half) the function returns a value in .02 seconds. If I leave the OR in, it takes 2.764 seconds to execute?? Can someone please show me a better way (faster) to do this? I tried using nvl() around the subquery but couldn't get it to compile.
    Thanks

    These things are difficult to diagnose remotely, but here is something you can try....
    SELECT */ SUM(pp.prim_pledge_amount)
    INTO return_amount
    FROM   primary_pledge pp
    WHERE  pp.prim_pledge_number IN (SELECT pc.pledge_number
                                     FROM pledge_codes pc
                                     WHERE pc.pledge_code_type = 'M'
                                     AND pc.pledge_code = 'AC'
                                     AND lpad(pc.pledge_comment,10,'0') = i_pledge_number
    UNION ALL
    SELECT i_pledge_number FROM dual)
       RETURN return_amount;
    END;If that doesn't do anything (and it might well not) there are a large number of different ways we can recast this query. To save us further guessing please give us more details: execution plans, database version number, volumetrics.
    Cheers, APC

  • A trouble with "LIKE" in a select statement

    Hi!
    I'm having trouble with "LIKE" in a select statement...
    With Access I can make the following and everything works well:
    SELECT name, birthday
    FROM client
    WHERE birthday LIKE '*/02/*';
    but if try to do it in my application (it uses Access), it doesn't work - I just can't understand that!!!
    In my application the "month" is always the currently month taken from the "System". Look what I'm doing...
    String query1 = "SELECT name, birthday " +
              "FROM client " +
              "WHERE birthday " +
              "LIKE '*/" +
              pMonth +
              "/*' " +
              "ORDER BY birthday ASC ";
    ResultSet rs = statement1.executeQuery(consulta1);
    boolean moreRecords = rs.next();
    The variable "moreRecords" is always "false", the query returns nothing although the table "client" has records that attend the query.
    Please, anyone can help me?! It's a little bit urgent.
    Thanks,
    Katia.

    Hi Katia,
    I'll bet the problem lies with the characters you're using to escape the LIKE clause. You're using the ones that Access likes to see, but that's not necessarily what's built into the JDBC-ODBC driver class.
    You can find out what the correct escape wildcard characters are from the java.sql.DatabaseMetaData.getSearchStringEscape() method. It'll tell you what to use in the LIKE clause.
    I'm not 100% sure about your code. It doesn't use query1 anywhere. I'd do this:
    String query = "SELECT name, birthday FROM client WHERE birthday LIKE ? ORDER BY birthday ASC";
    PreparedStatement statement = connection.createStatement(query);
    String escape = connection.getMetaData().getSearchStringEscape();
    String test = escape + '/' + pMonth + '/' + escape;
    statement.setString(1, test);
    ResultSet rs = statement.executeQuery();
    while (rs.hasNext())
    // load your data into a data structure to pass back.
    rs.close();
    statement.close();Let me know if that works. - MOD

  • (Trouble printing) Trouble with connection between Macbook Pro and Hp Deskjet 1510.

    Trouble with connection between Macbook Pro and Hp Deskjet 1510. (Nothing Prints).
    I have a Macbook Pro and am having difficulty printing documents from ‘Pages' from my Hp Deskjet 1510. I have installed the necessary software for the printer and it is connected via USB. Every time I try to print the printer icon comes up as it should, 'printing' and then 'job completed' and then the icon disappears. (Nothing is printed.) I thought it might be something to do with Pages compatibility with the printer but exporting the document to Word or making it a PDF doesn’t change anything. I don’t have Microsoft Word on my computer. The scanner does work and when I printed a ‘Test Page’ that worked too.
    Let me know if you know why this is happening.

    With these settings the network now works flawlessly, however, when i have my ethernet cable plugged in, my internet access via my airport card(on the macbook pro) is no longer available. Hoping you can tell me why this would be with this info i've provided.
    Educated guess. The networking devices have priorities as to which are used. The standard order is that Ethernet has a higher priority than Airport.
    While your Ethernet is unplugged it is inactive and the Mac ignores it. Once you plug it in, the Mac sees that it is active and switches traffic to that interface.
    I actually take advantage of this feature at home, but configuring my Airport and Ethernet with identical fixed IP addresses. Normally I'll use Airport, but if I'm copying a huge file and I want faster performance, I'll just walk my MacBook (previously iBook, previously Powerbook) over to my Ethernet switch and plug in my MacBook. Magically, the Mac detects that the Ethernet is active and continues the file transfer uninterrupted over the faster 100baseT Ethernet connection. When the transfer is finished, or if I really need to move back to the Comfy Chair, I unplug the Ethernet cable, and all activity reverts back to the Airport, all without disrupting any existing networking connections.
    You on the other hand have totally different settings for your Ethernet and your Airport, so when you switch to Ethernet, you basically loose your Airport connections.
    Something you can try:
    System Preferences -> Network
    Gear icon on the bottom left, next to the [+] [-] icons.
    Select *Set Service Order...*
    Now Drag the network interfaces into the perfer priority order you want. In this case put Airport above Ethernet.
    NOTE: You may want to create a new Network Location for this, instead of messing with your normal home Location (which is most likely the default Automatic. That way you have your original you can always fall back to.

  • Edge Animation having troubles with iOS devices within Muse Site

    Hi All! I've been creating a mobile version of my website www.rinkdesigns.com and have it all complete. I created an animation/navigation bar within Adobe Edge Animate and imported it into Muse. It functions AMAZINGLY on my Nexus 4 (Android) in Chrome but on a buddies iPhone 5 Chrome only loads about 3/4 of the animation/nav bar, in Safari the animation does not load at all and half of the page background does not load either. Please check out the preview site here http://rinkdesignsmobile.businesscatalyst.com/phone
    Has anyone else been having animation/mobile troubles with iOS devices? Any hints as to how you fixed your errors would be extremely helpful! I also posted this question in the Muse forum and haven't gotten a response...
    Thanks,
    John

    Or, how about this:
    Does anyone know how to have Edge Animate objects that utilize "_top" in an open url trigger make the Muse site that they are a part of open a new window/tab with that action (as opposed to having it open the url in the current page, or using "_blank" in the trigger)?

  • Trouble with 3rd party VST installs for Garageband, can't find instruments

    Hi,
    I am having trouble with Audio Units for Garageband when installing 3rd party software, VSTs, loops, instruments. I have more issues with Logic Pro. I am hoping that it is the same underlying issue and that I am just missing something. I have the manuals (not great for troubleshooting). I am confused with some installs use User Library and others use the Computer Library. I do go to the mfgs sites for updates. The installs sometimes work as standalones but I don't see ALL of the components of the software in say Garageband or Logic. Mostly, I am missing the "instruments" and "loops" that I want to access within the DAW. Some examples:
    • Here is some of the software I am talking about:  East West sample libraries (Play and Native Instruments); Vienna Symphonic librarires; Sylenth1 (just last night); Sample Tank 2 and Total Workstation 2 from IK Multimedia and others.
    • In GB I see the Audio Units for Vienna, Play, Sylenth, some of the IK Multimedia but NOT any instruments when I go to the "Sound Generator" -- I seem to be missing the instruments and loops. I see less AUs in Logic Pro. Some of these are VST instruments.
    • Can I just drag-drop samples to the library folders to fix this?
    • The plug-ins do not seem to work (though Sylenth1 worked for a single sound). When there is a standalone app (as in Sample Tank), I finally got the "sounds" to be reinstalled and loaded, those sounds/samples don't show up in any DAW.
    • When and if the sounds/loops/samples show up in GB's "Instruments" section will I be able to tell that they belong to that particular software or library?
    Thanks in advance.
    John

    Found the answer myself, it was simple:
    • Select the Track
    • Show the Instrument (info area)
    • Click on Edit
    • Click on the "Sound Generator" pop up field.
    • At the bottom of the pop-up list, select from the Audio Units that you have installed. This is where you see "Sample Tank 2, Vienna Instruments..."
    • NEXT -- IMPORTANT:   CLICK ON THE PICTURE next to the Sound Generator pop-up field.The AU unit loads up, the interface pops up, you load up the instruments in this AU Unit. You do NOT see the sounds from the AU unit in the normal Apple instrument list.
    This was not intuitive but once you know it, fairly simple.
    Still, the devil is in the details -- more questions on the way.

Maybe you are looking for

  • Need information abt ESS/MSS services?

    need information abt ESS/MSS services?

  • Steps to create  rfc destination

    hi, what are the steps to create rfc destination

  • Sending Links of T-code BP and CAA2 in work Item

    Hi,                     I'm having a scenario which needs two Transaction links (BP, CAA2) to be sent in the same Work Item. Can you please guide in this ?? Many Thanks, Jyoti Shankar

  • Equivalent of R3's KNVV_KONA (Priece_Group) in CRM

    Hi to everybody, I wanted to ask if somebody knows the equivalent table of KNVV in CRM, because i have to  make a target group in the segment builder of CRM on the basis of master data, especially on the base of the KONA field which is situated in th

  • Java doesn't work right

    I prefer Mozilla over Internet Explorer. But Java works on Explorer. I've read a dozen posts from other people who have this problem. Most of the fixes are complicated or have to be redone often. Just downloaded latest version of Mozilla, and I can't